1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 27 /* 28 * OPL CMU-CH PCI nexus driver. 29 * 30 */ 31 32 #include <sys/types.h> 33 #include <sys/sysmacros.h> 34 #include <sys/systm.h> 35 #include <sys/intreg.h> 36 #include <sys/intr.h> 37 #include <sys/machsystm.h> 38 #include <sys/conf.h> 39 #include <sys/stat.h> 40 #include <sys/kmem.h> 41 #include <sys/async.h> 42 #include <sys/ivintr.h> 43 #include <sys/sunddi.h> 44 #include <sys/sunndi.h> 45 #include <sys/ndifm.h> 46 #include <sys/ontrap.h> 47 #include <sys/ddi_impldefs.h> 48 #include <sys/ddi_subrdefs.h> 49 #include <sys/epm.h> 50 #include <sys/spl.h> 51 #include <sys/fm/util.h> 52 #include <sys/fm/util.h> 53 #include <sys/fm/protocol.h> 54 #include <sys/fm/io/pci.h> 55 #include <sys/fm/io/sun4upci.h> 56 #include <sys/pcicmu/pcicmu.h> 57 58 #include <sys/cmn_err.h> 59 #include <sys/time.h> 60 #include <sys/pci.h> 61 #include <sys/modctl.h> 62 #include <sys/open.h> 63 #include <sys/errno.h> 64 #include <sys/file.h> 65 66 67 uint32_t pcmu_spurintr_duration = 60000000; /* One minute */ 68 69 /* 70 * The variable controls the default setting of the command register 71 * for pci devices. See pcmu_init_child() for details. 72 * 73 * This flags also controls the setting of bits in the bridge control 74 * register pci to pci bridges. See pcmu_init_child() for details. 75 */ 76 ushort_t pcmu_command_default = PCI_COMM_SERR_ENABLE | 77 PCI_COMM_WAIT_CYC_ENAB | 78 PCI_COMM_PARITY_DETECT | 79 PCI_COMM_ME | 80 PCI_COMM_MAE | 81 PCI_COMM_IO; 82 /* 83 * The following driver parameters are defined as variables to allow 84 * patching for debugging and tuning. Flags that can be set on a per 85 * PBM basis are bit fields where the PBM device instance number maps 86 * to the bit position. 87 */ 88 #ifdef DEBUG 89 uint64_t pcmu_debug_flags = 0; 90 #endif 91 uint_t ecc_error_intr_enable = 1; 92 93 uint_t pcmu_ecc_afsr_retries = 100; /* XXX - what's a good value? */ 94 95 uint_t pcmu_intr_retry_intv = 5; /* for interrupt retry reg */ 96 uint_t pcmu_panic_on_fatal_errors = 1; /* should be 1 at beta */ 97 98 hrtime_t pcmu_intrpend_timeout = 5ll * NANOSEC; /* 5 seconds in nanoseconds */ 99 100 uint64_t pcmu_errtrig_pa = 0x0; 101 102 103 /* 104 * The following value is the number of consecutive unclaimed interrupts that 105 * will be tolerated for a particular ino_p before the interrupt is deemed to 106 * be jabbering and is blocked. 107 */ 108 uint_t pcmu_unclaimed_intr_max = 20; 109 110 /* 111 * function prototypes for dev ops routines: 112 */ 113 static int pcmu_attach(dev_info_t *dip, ddi_attach_cmd_t cmd); 114 static int pcmu_detach(dev_info_t *dip, ddi_detach_cmd_t cmd); 115 static int pcmu_info(dev_info_t *dip, ddi_info_cmd_t infocmd, 116 void *arg, void **result); 117 static int pcmu_open(dev_t *devp, int flags, int otyp, cred_t *credp); 118 static int pcmu_close(dev_t dev, int flags, int otyp, cred_t *credp); 119 static int pcmu_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, 120 cred_t *credp, int *rvalp); 121 static int pcmu_prop_op(dev_t dev, dev_info_t *dip, ddi_prop_op_t prop_op, 122 int flags, char *name, caddr_t valuep, int *lengthp); 123 static int pcmu_ctlops_poke(pcmu_t *pcmu_p, peekpoke_ctlops_t *in_args); 124 static int pcmu_ctlops_peek(pcmu_t *pcmu_p, peekpoke_ctlops_t *in_args, 125 void *result); 126 127 static int map_pcmu_registers(pcmu_t *, dev_info_t *); 128 static void unmap_pcmu_registers(pcmu_t *); 129 static void pcmu_pbm_clear_error(pcmu_pbm_t *); 130 131 static int pcmu_ctlops(dev_info_t *, dev_info_t *, ddi_ctl_enum_t, 132 void *, void *); 133 static int pcmu_map(dev_info_t *, dev_info_t *, ddi_map_req_t *, 134 off_t, off_t, caddr_t *); 135 static int pcmu_intr_ops(dev_info_t *, dev_info_t *, ddi_intr_op_t, 136 ddi_intr_handle_impl_t *, void *); 137 138 static uint32_t pcmu_identity_init(pcmu_t *pcmu_p); 139 static int pcmu_intr_setup(pcmu_t *pcmu_p); 140 static void pcmu_pbm_errstate_get(pcmu_t *pcmu_p, 141 pcmu_pbm_errstate_t *pbm_err_p); 142 static int pcmu_obj_setup(pcmu_t *pcmu_p); 143 static void pcmu_obj_destroy(pcmu_t *pcmu_p); 144 static void pcmu_obj_resume(pcmu_t *pcmu_p); 145 static void pcmu_obj_suspend(pcmu_t *pcmu_p); 146 147 static void u2u_ittrans_init(pcmu_t *, u2u_ittrans_data_t **); 148 static void u2u_ittrans_resume(u2u_ittrans_data_t **); 149 static void u2u_ittrans_uninit(u2u_ittrans_data_t *); 150 151 static pcmu_ksinfo_t *pcmu_name_kstat; 152 153 /* 154 * bus ops and dev ops structures: 155 */ 156 static struct bus_ops pcmu_bus_ops = { 157 BUSO_REV, 158 pcmu_map, 159 0, 160 0, 161 0, 162 i_ddi_map_fault, 163 0, 164 0, 165 0, 166 0, 167 0, 168 0, 169 0, 170 0, 171 pcmu_ctlops, 172 ddi_bus_prop_op, 173 ndi_busop_get_eventcookie, /* (*bus_get_eventcookie)(); */ 174 ndi_busop_add_eventcall, /* (*bus_add_eventcall)(); */ 175 ndi_busop_remove_eventcall, /* (*bus_remove_eventcall)(); */ 176 ndi_post_event, /* (*bus_post_event)(); */ 177 NULL, /* (*bus_intr_ctl)(); */ 178 NULL, /* (*bus_config)(); */ 179 NULL, /* (*bus_unconfig)(); */ 180 NULL, /* (*bus_fm_init)(); */ 181 NULL, /* (*bus_fm_fini)(); */ 182 NULL, /* (*bus_fm_access_enter)(); */ 183 NULL, /* (*bus_fm_access_fini)(); */ 184 NULL, /* (*bus_power)(); */ 185 pcmu_intr_ops /* (*bus_intr_op)(); */ 186 }; 187 188 struct cb_ops pcmu_cb_ops = { 189 pcmu_open, /* open */ 190 pcmu_close, /* close */ 191 nodev, /* strategy */ 192 nodev, /* print */ 193 nodev, /* dump */ 194 nodev, /* read */ 195 nodev, /* write */ 196 pcmu_ioctl, /* ioctl */ 197 nodev, /* devmap */ 198 nodev, /* mmap */ 199 nodev, /* segmap */ 200 nochpoll, /* poll */ 201 pcmu_prop_op, /* cb_prop_op */ 202 NULL, /* streamtab */ 203 D_NEW | D_MP | D_HOTPLUG, /* Driver compatibility flag */ 204 CB_REV, /* rev */ 205 nodev, /* int (*cb_aread)() */ 206 nodev /* int (*cb_awrite)() */ 207 }; 208 209 static struct dev_ops pcmu_ops = { 210 DEVO_REV, 211 0, 212 pcmu_info, 213 nulldev, 214 0, 215 pcmu_attach, 216 pcmu_detach, 217 nodev, 218 &pcmu_cb_ops, 219 &pcmu_bus_ops, 220 0, 221 ddi_quiesce_not_needed, /* quiesce */ 222 223 }; 224 225 /* 226 * module definitions: 227 */ 228 extern struct mod_ops mod_driverops; 229 230 static struct modldrv modldrv = { 231 &mod_driverops, /* Type of module - driver */ 232 "OPL CMU-CH PCI Nexus driver", /* Name of module. */ 233 &pcmu_ops, /* driver ops */ 234 }; 235 236 static struct modlinkage modlinkage = { 237 MODREV_1, (void *)&modldrv, NULL 238 }; 239 240 /* 241 * driver global data: 242 */ 243 void *per_pcmu_state; /* per-pbm soft state pointer */ 244 kmutex_t pcmu_global_mutex; /* attach/detach common struct lock */ 245 errorq_t *pcmu_ecc_queue = NULL; /* per-system ecc handling queue */ 246 247 extern void pcmu_child_cfg_save(dev_info_t *dip); 248 extern void pcmu_child_cfg_restore(dev_info_t *dip); 249 250 int 251 _init(void) 252 { 253 int e; 254 255 /* 256 * Initialize per-pci bus soft state pointer. 257 */ 258 e = ddi_soft_state_init(&per_pcmu_state, sizeof (pcmu_t), 1); 259 if (e != 0) 260 return (e); 261 262 /* 263 * Initialize global mutexes. 264 */ 265 mutex_init(&pcmu_global_mutex, NULL, MUTEX_DRIVER, NULL); 266 267 /* 268 * Create the performance kstats. 269 */ 270 pcmu_kstat_init(); 271 272 /* 273 * Install the module. 274 */ 275 e = mod_install(&modlinkage); 276 if (e != 0) { 277 ddi_soft_state_fini(&per_pcmu_state); 278 mutex_destroy(&pcmu_global_mutex); 279 } 280 return (e); 281 } 282 283 int 284 _fini(void) 285 { 286 int e; 287 288 /* 289 * Remove the module. 290 */ 291 e = mod_remove(&modlinkage); 292 if (e != 0) { 293 return (e); 294 } 295 296 /* 297 * Destroy pcmu_ecc_queue, and set it to NULL. 298 */ 299 if (pcmu_ecc_queue) { 300 errorq_destroy(pcmu_ecc_queue); 301 pcmu_ecc_queue = NULL; 302 } 303 304 /* 305 * Destroy the performance kstats. 306 */ 307 pcmu_kstat_fini(); 308 309 /* 310 * Free the per-pci and per-CMU-CH soft state info and destroy 311 * mutex for per-CMU-CH soft state. 312 */ 313 ddi_soft_state_fini(&per_pcmu_state); 314 mutex_destroy(&pcmu_global_mutex); 315 return (e); 316 } 317 318 int 319 _info(struct modinfo *modinfop) 320 { 321 return (mod_info(&modlinkage, modinfop)); 322 } 323 324 /*ARGSUSED*/ 325 static int 326 pcmu_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) 327 { 328 int instance = getminor((dev_t)arg) >> 8; 329 pcmu_t *pcmu_p = get_pcmu_soft_state(instance); 330 331 switch (infocmd) { 332 case DDI_INFO_DEVT2INSTANCE: 333 *result = (void *)(uintptr_t)instance; 334 return (DDI_SUCCESS); 335 336 case DDI_INFO_DEVT2DEVINFO: 337 if (pcmu_p == NULL) 338 return (DDI_FAILURE); 339 *result = (void *)pcmu_p->pcmu_dip; 340 return (DDI_SUCCESS); 341 342 default: 343 return (DDI_FAILURE); 344 } 345 } 346 347 348 /* device driver entry points */ 349 /* 350 * attach entry point: 351 */ 352 static int 353 pcmu_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) 354 { 355 pcmu_t *pcmu_p; 356 int instance = ddi_get_instance(dip); 357 358 switch (cmd) { 359 case DDI_ATTACH: 360 PCMU_DBG0(PCMU_DBG_ATTACH, dip, "DDI_ATTACH\n"); 361 362 /* 363 * Allocate and get the per-pci soft state structure. 364 */ 365 if (alloc_pcmu_soft_state(instance) != DDI_SUCCESS) { 366 cmn_err(CE_WARN, "%s%d: can't allocate pci state", 367 ddi_driver_name(dip), instance); 368 goto err_bad_pcmu_softstate; 369 } 370 pcmu_p = get_pcmu_soft_state(instance); 371 pcmu_p->pcmu_dip = dip; 372 mutex_init(&pcmu_p->pcmu_mutex, NULL, MUTEX_DRIVER, NULL); 373 pcmu_p->pcmu_soft_state = PCMU_SOFT_STATE_CLOSED; 374 pcmu_p->pcmu_open_count = 0; 375 376 /* 377 * Get key properties of the pci bridge node. 378 */ 379 if (get_pcmu_properties(pcmu_p, dip) == DDI_FAILURE) { 380 goto err_bad_pcmu_prop; 381 } 382 383 /* 384 * Map in the registers. 385 */ 386 if (map_pcmu_registers(pcmu_p, dip) == DDI_FAILURE) { 387 goto err_bad_reg_prop; 388 } 389 if (pcmu_obj_setup(pcmu_p) != DDI_SUCCESS) { 390 goto err_bad_objs; 391 } 392 393 if (ddi_create_minor_node(dip, "devctl", S_IFCHR, 394 (uint_t)instance<<8 | 0xff, 395 DDI_NT_NEXUS, 0) != DDI_SUCCESS) { 396 goto err_bad_devctl_node; 397 } 398 399 /* 400 * Due to unresolved hardware issues, disable PCIPM until 401 * the problem is fully understood. 402 * 403 * pcmu_pwr_setup(pcmu_p, dip); 404 */ 405 406 ddi_report_dev(dip); 407 408 pcmu_p->pcmu_state = PCMU_ATTACHED; 409 PCMU_DBG0(PCMU_DBG_ATTACH, dip, "attach success\n"); 410 break; 411 412 err_bad_objs: 413 ddi_remove_minor_node(dip, "devctl"); 414 err_bad_devctl_node: 415 unmap_pcmu_registers(pcmu_p); 416 err_bad_reg_prop: 417 free_pcmu_properties(pcmu_p); 418 err_bad_pcmu_prop: 419 mutex_destroy(&pcmu_p->pcmu_mutex); 420 free_pcmu_soft_state(instance); 421 err_bad_pcmu_softstate: 422 return (DDI_FAILURE); 423 424 case DDI_RESUME: 425 PCMU_DBG0(PCMU_DBG_ATTACH, dip, "DDI_RESUME\n"); 426 427 /* 428 * Make sure the CMU-CH control registers 429 * are configured properly. 430 */ 431 pcmu_p = get_pcmu_soft_state(instance); 432 mutex_enter(&pcmu_p->pcmu_mutex); 433 434 /* 435 * Make sure this instance has been suspended. 436 */ 437 if (pcmu_p->pcmu_state != PCMU_SUSPENDED) { 438 PCMU_DBG0(PCMU_DBG_ATTACH, dip, 439 "instance NOT suspended\n"); 440 mutex_exit(&pcmu_p->pcmu_mutex); 441 return (DDI_FAILURE); 442 } 443 pcmu_obj_resume(pcmu_p); 444 pcmu_p->pcmu_state = PCMU_ATTACHED; 445 446 pcmu_child_cfg_restore(dip); 447 448 mutex_exit(&pcmu_p->pcmu_mutex); 449 break; 450 451 default: 452 PCMU_DBG0(PCMU_DBG_ATTACH, dip, "unsupported attach op\n"); 453 return (DDI_FAILURE); 454 } 455 456 return (DDI_SUCCESS); 457 } 458 459 /* 460 * detach entry point: 461 */ 462 static int 463 pcmu_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) 464 { 465 int instance = ddi_get_instance(dip); 466 pcmu_t *pcmu_p = get_pcmu_soft_state(instance); 467 int len; 468 469 /* 470 * Make sure we are currently attached 471 */ 472 if (pcmu_p->pcmu_state != PCMU_ATTACHED) { 473 PCMU_DBG0(PCMU_DBG_ATTACH, dip, 474 "failed - instance not attached\n"); 475 return (DDI_FAILURE); 476 } 477 478 mutex_enter(&pcmu_p->pcmu_mutex); 479 480 switch (cmd) { 481 case DDI_DETACH: 482 PCMU_DBG0(PCMU_DBG_DETACH, dip, "DDI_DETACH\n"); 483 pcmu_obj_destroy(pcmu_p); 484 485 /* 486 * Free the pci soft state structure and the rest of the 487 * resources it's using. 488 */ 489 free_pcmu_properties(pcmu_p); 490 unmap_pcmu_registers(pcmu_p); 491 mutex_exit(&pcmu_p->pcmu_mutex); 492 mutex_destroy(&pcmu_p->pcmu_mutex); 493 free_pcmu_soft_state(instance); 494 495 /* Free the interrupt-priorities prop if we created it. */ 496 if (ddi_getproplen(DDI_DEV_T_ANY, dip, 497 DDI_PROP_NOTPROM | DDI_PROP_DONTPASS, 498 "interrupt-priorities", &len) == DDI_PROP_SUCCESS) { 499 (void) ddi_prop_remove(DDI_DEV_T_NONE, dip, 500 "interrupt-priorities"); 501 } 502 return (DDI_SUCCESS); 503 504 case DDI_SUSPEND: 505 pcmu_child_cfg_save(dip); 506 pcmu_obj_suspend(pcmu_p); 507 pcmu_p->pcmu_state = PCMU_SUSPENDED; 508 509 mutex_exit(&pcmu_p->pcmu_mutex); 510 return (DDI_SUCCESS); 511 512 default: 513 PCMU_DBG0(PCMU_DBG_DETACH, dip, "unsupported detach op\n"); 514 mutex_exit(&pcmu_p->pcmu_mutex); 515 return (DDI_FAILURE); 516 } 517 } 518 519 /* ARGSUSED3 */ 520 static int 521 pcmu_open(dev_t *devp, int flags, int otyp, cred_t *credp) 522 { 523 pcmu_t *pcmu_p; 524 525 if (otyp != OTYP_CHR) { 526 return (EINVAL); 527 } 528 529 /* 530 * Get the soft state structure for the device. 531 */ 532 pcmu_p = DEV_TO_SOFTSTATE(*devp); 533 if (pcmu_p == NULL) { 534 return (ENXIO); 535 } 536 537 /* 538 * Handle the open by tracking the device state. 539 */ 540 PCMU_DBG2(PCMU_DBG_OPEN, pcmu_p->pcmu_dip, 541 "devp=%x: flags=%x\n", devp, flags); 542 mutex_enter(&pcmu_p->pcmu_mutex); 543 if (flags & FEXCL) { 544 if (pcmu_p->pcmu_soft_state != PCMU_SOFT_STATE_CLOSED) { 545 mutex_exit(&pcmu_p->pcmu_mutex); 546 PCMU_DBG0(PCMU_DBG_OPEN, pcmu_p->pcmu_dip, "busy\n"); 547 return (EBUSY); 548 } 549 pcmu_p->pcmu_soft_state = PCMU_SOFT_STATE_OPEN_EXCL; 550 } else { 551 if (pcmu_p->pcmu_soft_state == PCMU_SOFT_STATE_OPEN_EXCL) { 552 mutex_exit(&pcmu_p->pcmu_mutex); 553 PCMU_DBG0(PCMU_DBG_OPEN, pcmu_p->pcmu_dip, "busy\n"); 554 return (EBUSY); 555 } 556 pcmu_p->pcmu_soft_state = PCMU_SOFT_STATE_OPEN; 557 } 558 pcmu_p->pcmu_open_count++; 559 mutex_exit(&pcmu_p->pcmu_mutex); 560 return (0); 561 } 562 563 564 /* ARGSUSED */ 565 static int 566 pcmu_close(dev_t dev, int flags, int otyp, cred_t *credp) 567 { 568 pcmu_t *pcmu_p; 569 570 if (otyp != OTYP_CHR) { 571 return (EINVAL); 572 } 573 574 pcmu_p = DEV_TO_SOFTSTATE(dev); 575 if (pcmu_p == NULL) { 576 return (ENXIO); 577 } 578 579 PCMU_DBG2(PCMU_DBG_CLOSE, pcmu_p->pcmu_dip, 580 "dev=%x: flags=%x\n", dev, flags); 581 mutex_enter(&pcmu_p->pcmu_mutex); 582 pcmu_p->pcmu_soft_state = PCMU_SOFT_STATE_CLOSED; 583 pcmu_p->pcmu_open_count = 0; 584 mutex_exit(&pcmu_p->pcmu_mutex); 585 return (0); 586 } 587 588 /* ARGSUSED */ 589 static int 590 pcmu_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, 591 cred_t *credp, int *rvalp) 592 { 593 pcmu_t *pcmu_p; 594 dev_info_t *dip; 595 struct devctl_iocdata *dcp; 596 uint_t bus_state; 597 int rv = 0; 598 599 pcmu_p = DEV_TO_SOFTSTATE(dev); 600 if (pcmu_p == NULL) { 601 return (ENXIO); 602 } 603 604 dip = pcmu_p->pcmu_dip; 605 PCMU_DBG2(PCMU_DBG_IOCTL, dip, "dev=%x: cmd=%x\n", dev, cmd); 606 607 /* 608 * We can use the generic implementation for these ioctls 609 */ 610 switch (cmd) { 611 case DEVCTL_DEVICE_GETSTATE: 612 case DEVCTL_DEVICE_ONLINE: 613 case DEVCTL_DEVICE_OFFLINE: 614 case DEVCTL_BUS_GETSTATE: 615 return (ndi_devctl_ioctl(dip, cmd, arg, mode, 0)); 616 } 617 618 /* 619 * read devctl ioctl data 620 */ 621 if (ndi_dc_allochdl((void *)arg, &dcp) != NDI_SUCCESS) 622 return (EFAULT); 623 624 switch (cmd) { 625 626 case DEVCTL_DEVICE_RESET: 627 PCMU_DBG0(PCMU_DBG_IOCTL, dip, "DEVCTL_DEVICE_RESET\n"); 628 rv = ENOTSUP; 629 break; 630 631 632 case DEVCTL_BUS_QUIESCE: 633 PCMU_DBG0(PCMU_DBG_IOCTL, dip, "DEVCTL_BUS_QUIESCE\n"); 634 if (ndi_get_bus_state(dip, &bus_state) == NDI_SUCCESS) { 635 if (bus_state == BUS_QUIESCED) { 636 break; 637 } 638 } 639 (void) ndi_set_bus_state(dip, BUS_QUIESCED); 640 break; 641 642 case DEVCTL_BUS_UNQUIESCE: 643 PCMU_DBG0(PCMU_DBG_IOCTL, dip, "DEVCTL_BUS_UNQUIESCE\n"); 644 if (ndi_get_bus_state(dip, &bus_state) == NDI_SUCCESS) { 645 if (bus_state == BUS_ACTIVE) { 646 break; 647 } 648 } 649 (void) ndi_set_bus_state(dip, BUS_ACTIVE); 650 break; 651 652 case DEVCTL_BUS_RESET: 653 PCMU_DBG0(PCMU_DBG_IOCTL, dip, "DEVCTL_BUS_RESET\n"); 654 rv = ENOTSUP; 655 break; 656 657 case DEVCTL_BUS_RESETALL: 658 PCMU_DBG0(PCMU_DBG_IOCTL, dip, "DEVCTL_BUS_RESETALL\n"); 659 rv = ENOTSUP; 660 break; 661 662 default: 663 rv = ENOTTY; 664 } 665 666 ndi_dc_freehdl(dcp); 667 return (rv); 668 } 669 670 static int pcmu_prop_op(dev_t dev, dev_info_t *dip, ddi_prop_op_t prop_op, 671 int flags, char *name, caddr_t valuep, int *lengthp) 672 { 673 return (ddi_prop_op(dev, dip, prop_op, flags, name, valuep, lengthp)); 674 } 675 /* bus driver entry points */ 676 677 /* 678 * bus map entry point: 679 * 680 * if map request is for an rnumber 681 * get the corresponding regspec from device node 682 * build a new regspec in our parent's format 683 * build a new map_req with the new regspec 684 * call up the tree to complete the mapping 685 */ 686 static int 687 pcmu_map(dev_info_t *dip, dev_info_t *rdip, ddi_map_req_t *mp, 688 off_t off, off_t len, caddr_t *addrp) 689 { 690 pcmu_t *pcmu_p = get_pcmu_soft_state(ddi_get_instance(dip)); 691 struct regspec p_regspec; 692 ddi_map_req_t p_mapreq; 693 int reglen, rval, r_no; 694 pci_regspec_t reloc_reg, *rp = &reloc_reg; 695 696 PCMU_DBG2(PCMU_DBG_MAP, dip, "rdip=%s%d:", 697 ddi_driver_name(rdip), ddi_get_instance(rdip)); 698 699 if (mp->map_flags & DDI_MF_USER_MAPPING) { 700 return (DDI_ME_UNIMPLEMENTED); 701 } 702 703 switch (mp->map_type) { 704 case DDI_MT_REGSPEC: 705 reloc_reg = *(pci_regspec_t *)mp->map_obj.rp; /* dup whole */ 706 break; 707 708 case DDI_MT_RNUMBER: 709 r_no = mp->map_obj.rnumber; 710 PCMU_DBG1(PCMU_DBG_MAP | PCMU_DBG_CONT, dip, " r#=%x", r_no); 711 712 if (ddi_getlongprop(DDI_DEV_T_NONE, rdip, DDI_PROP_DONTPASS, 713 "reg", (caddr_t)&rp, ®len) != DDI_SUCCESS) { 714 return (DDI_ME_RNUMBER_RANGE); 715 } 716 717 if (r_no < 0 || r_no >= reglen / sizeof (pci_regspec_t)) { 718 kmem_free(rp, reglen); 719 return (DDI_ME_RNUMBER_RANGE); 720 } 721 rp += r_no; 722 break; 723 724 default: 725 return (DDI_ME_INVAL); 726 } 727 PCMU_DBG0(PCMU_DBG_MAP | PCMU_DBG_CONT, dip, "\n"); 728 729 /* use "assigned-addresses" to relocate regspec within pci space */ 730 if (rval = pcmu_reloc_reg(dip, rdip, pcmu_p, rp)) { 731 goto done; 732 } 733 734 /* adjust regspec according to mapping request */ 735 if (len) { 736 rp->pci_size_low = (uint_t)len; 737 } 738 rp->pci_phys_low += off; 739 740 /* use "ranges" to translate relocated pci regspec into parent space */ 741 if (rval = pcmu_xlate_reg(pcmu_p, rp, &p_regspec)) { 742 goto done; 743 } 744 745 p_mapreq = *mp; /* dup the whole structure */ 746 p_mapreq.map_type = DDI_MT_REGSPEC; 747 p_mapreq.map_obj.rp = &p_regspec; 748 rval = ddi_map(dip, &p_mapreq, 0, 0, addrp); 749 750 done: 751 if (mp->map_type == DDI_MT_RNUMBER) { 752 kmem_free(rp - r_no, reglen); 753 } 754 return (rval); 755 } 756 757 #ifdef DEBUG 758 int pcmu_peekfault_cnt = 0; 759 int pcmu_pokefault_cnt = 0; 760 #endif /* DEBUG */ 761 762 static int 763 pcmu_do_poke(pcmu_t *pcmu_p, peekpoke_ctlops_t *in_args) 764 { 765 pcmu_pbm_t *pcbm_p = pcmu_p->pcmu_pcbm_p; 766 int err = DDI_SUCCESS; 767 on_trap_data_t otd; 768 769 mutex_enter(&pcbm_p->pcbm_pokeflt_mutex); 770 pcbm_p->pcbm_ontrap_data = &otd; 771 772 /* Set up protected environment. */ 773 if (!on_trap(&otd, OT_DATA_ACCESS)) { 774 uintptr_t tramp = otd.ot_trampoline; 775 776 otd.ot_trampoline = (uintptr_t)&poke_fault; 777 err = do_poke(in_args->size, (void *)in_args->dev_addr, 778 (void *)in_args->host_addr); 779 otd.ot_trampoline = tramp; 780 } else { 781 err = DDI_FAILURE; 782 } 783 784 /* 785 * Read the async fault register for the PBM to see it sees 786 * a master-abort. 787 */ 788 pcmu_pbm_clear_error(pcbm_p); 789 790 if (otd.ot_trap & OT_DATA_ACCESS) { 791 err = DDI_FAILURE; 792 } 793 794 /* Take down protected environment. */ 795 no_trap(); 796 797 pcbm_p->pcbm_ontrap_data = NULL; 798 mutex_exit(&pcbm_p->pcbm_pokeflt_mutex); 799 800 #ifdef DEBUG 801 if (err == DDI_FAILURE) 802 pcmu_pokefault_cnt++; 803 #endif 804 return (err); 805 } 806 807 808 static int 809 pcmu_ctlops_poke(pcmu_t *pcmu_p, peekpoke_ctlops_t *in_args) 810 { 811 return (pcmu_do_poke(pcmu_p, in_args)); 812 } 813 814 /* ARGSUSED */ 815 static int 816 pcmu_do_peek(pcmu_t *pcmu_p, peekpoke_ctlops_t *in_args) 817 { 818 int err = DDI_SUCCESS; 819 on_trap_data_t otd; 820 821 if (!on_trap(&otd, OT_DATA_ACCESS)) { 822 uintptr_t tramp = otd.ot_trampoline; 823 824 otd.ot_trampoline = (uintptr_t)&peek_fault; 825 err = do_peek(in_args->size, (void *)in_args->dev_addr, 826 (void *)in_args->host_addr); 827 otd.ot_trampoline = tramp; 828 } else 829 err = DDI_FAILURE; 830 831 no_trap(); 832 833 #ifdef DEBUG 834 if (err == DDI_FAILURE) 835 pcmu_peekfault_cnt++; 836 #endif 837 return (err); 838 } 839 840 841 static int 842 pcmu_ctlops_peek(pcmu_t *pcmu_p, peekpoke_ctlops_t *in_args, void *result) 843 { 844 result = (void *)in_args->host_addr; 845 return (pcmu_do_peek(pcmu_p, in_args)); 846 } 847 848 /* 849 * control ops entry point: 850 * 851 * Requests handled completely: 852 * DDI_CTLOPS_INITCHILD see pcmu_init_child() for details 853 * DDI_CTLOPS_UNINITCHILD 854 * DDI_CTLOPS_REPORTDEV see report_dev() for details 855 * DDI_CTLOPS_XLATE_INTRS nothing to do 856 * DDI_CTLOPS_IOMIN cache line size if streaming otherwise 1 857 * DDI_CTLOPS_REGSIZE 858 * DDI_CTLOPS_NREGS 859 * DDI_CTLOPS_NINTRS 860 * DDI_CTLOPS_DVMAPAGESIZE 861 * DDI_CTLOPS_POKE 862 * DDI_CTLOPS_PEEK 863 * DDI_CTLOPS_QUIESCE 864 * DDI_CTLOPS_UNQUIESCE 865 * 866 * All others passed to parent. 867 */ 868 static int 869 pcmu_ctlops(dev_info_t *dip, dev_info_t *rdip, 870 ddi_ctl_enum_t op, void *arg, void *result) 871 { 872 pcmu_t *pcmu_p = get_pcmu_soft_state(ddi_get_instance(dip)); 873 874 switch (op) { 875 case DDI_CTLOPS_INITCHILD: 876 return (pcmu_init_child(pcmu_p, (dev_info_t *)arg)); 877 878 case DDI_CTLOPS_UNINITCHILD: 879 return (pcmu_uninit_child(pcmu_p, (dev_info_t *)arg)); 880 881 case DDI_CTLOPS_REPORTDEV: 882 return (pcmu_report_dev(rdip)); 883 884 case DDI_CTLOPS_IOMIN: 885 /* 886 * If we are using the streaming cache, align at 887 * least on a cache line boundary. Otherwise use 888 * whatever alignment is passed in. 889 */ 890 return (DDI_SUCCESS); 891 892 case DDI_CTLOPS_REGSIZE: 893 *((off_t *)result) = pcmu_get_reg_set_size(rdip, *((int *)arg)); 894 return (DDI_SUCCESS); 895 896 case DDI_CTLOPS_NREGS: 897 *((uint_t *)result) = pcmu_get_nreg_set(rdip); 898 return (DDI_SUCCESS); 899 900 case DDI_CTLOPS_DVMAPAGESIZE: 901 *((ulong_t *)result) = 0; 902 return (DDI_SUCCESS); 903 904 case DDI_CTLOPS_POKE: 905 return (pcmu_ctlops_poke(pcmu_p, (peekpoke_ctlops_t *)arg)); 906 907 case DDI_CTLOPS_PEEK: 908 return (pcmu_ctlops_peek(pcmu_p, (peekpoke_ctlops_t *)arg, 909 result)); 910 911 case DDI_CTLOPS_AFFINITY: 912 break; 913 914 case DDI_CTLOPS_QUIESCE: 915 return (DDI_FAILURE); 916 917 case DDI_CTLOPS_UNQUIESCE: 918 return (DDI_FAILURE); 919 920 default: 921 break; 922 } 923 924 /* 925 * Now pass the request up to our parent. 926 */ 927 PCMU_DBG2(PCMU_DBG_CTLOPS, dip, 928 "passing request to parent: rdip=%s%d\n", 929 ddi_driver_name(rdip), ddi_get_instance(rdip)); 930 return (ddi_ctlops(dip, rdip, op, arg, result)); 931 } 932 933 934 /* ARGSUSED */ 935 static int 936 pcmu_intr_ops(dev_info_t *dip, dev_info_t *rdip, ddi_intr_op_t intr_op, 937 ddi_intr_handle_impl_t *hdlp, void *result) 938 { 939 pcmu_t *pcmu_p = get_pcmu_soft_state(ddi_get_instance(dip)); 940 int ret = DDI_SUCCESS; 941 942 switch (intr_op) { 943 case DDI_INTROP_GETCAP: 944 /* GetCap will always fail for all non PCI devices */ 945 (void) pci_intx_get_cap(rdip, (int *)result); 946 break; 947 case DDI_INTROP_SETCAP: 948 ret = DDI_ENOTSUP; 949 break; 950 case DDI_INTROP_ALLOC: 951 *(int *)result = hdlp->ih_scratch1; 952 break; 953 case DDI_INTROP_FREE: 954 break; 955 case DDI_INTROP_GETPRI: 956 *(int *)result = hdlp->ih_pri ? hdlp->ih_pri : 0; 957 break; 958 case DDI_INTROP_SETPRI: 959 break; 960 case DDI_INTROP_ADDISR: 961 ret = pcmu_add_intr(dip, rdip, hdlp); 962 break; 963 case DDI_INTROP_REMISR: 964 ret = pcmu_remove_intr(dip, rdip, hdlp); 965 break; 966 case DDI_INTROP_ENABLE: 967 ret = pcmu_ib_update_intr_state(pcmu_p, rdip, hdlp, 968 PCMU_INTR_STATE_ENABLE); 969 break; 970 case DDI_INTROP_DISABLE: 971 ret = pcmu_ib_update_intr_state(pcmu_p, rdip, hdlp, 972 PCMU_INTR_STATE_DISABLE); 973 break; 974 case DDI_INTROP_SETMASK: 975 ret = pci_intx_set_mask(rdip); 976 break; 977 case DDI_INTROP_CLRMASK: 978 ret = pci_intx_clr_mask(rdip); 979 break; 980 case DDI_INTROP_GETPENDING: 981 ret = pci_intx_get_pending(rdip, (int *)result); 982 break; 983 case DDI_INTROP_NINTRS: 984 case DDI_INTROP_NAVAIL: 985 *(int *)result = i_ddi_get_intx_nintrs(rdip); 986 break; 987 case DDI_INTROP_SUPPORTED_TYPES: 988 /* PCI nexus driver supports only fixed interrupts */ 989 *(int *)result = i_ddi_get_intx_nintrs(rdip) ? 990 DDI_INTR_TYPE_FIXED : 0; 991 break; 992 default: 993 ret = DDI_ENOTSUP; 994 break; 995 } 996 997 return (ret); 998 } 999 1000 /* 1001 * CMU-CH specifics implementation: 1002 * interrupt mapping register 1003 * PBM configuration 1004 * ECC and PBM error handling 1005 */ 1006 1007 /* called by pcmu_attach() DDI_ATTACH to initialize pci objects */ 1008 static int 1009 pcmu_obj_setup(pcmu_t *pcmu_p) 1010 { 1011 int ret; 1012 1013 mutex_enter(&pcmu_global_mutex); 1014 pcmu_p->pcmu_rev = ddi_prop_get_int(DDI_DEV_T_ANY, pcmu_p->pcmu_dip, 1015 DDI_PROP_DONTPASS, "module-revision#", 0); 1016 1017 pcmu_ib_create(pcmu_p); 1018 pcmu_cb_create(pcmu_p); 1019 pcmu_ecc_create(pcmu_p); 1020 pcmu_pbm_create(pcmu_p); 1021 pcmu_err_create(pcmu_p); 1022 if ((ret = pcmu_intr_setup(pcmu_p)) != DDI_SUCCESS) 1023 goto done; 1024 1025 /* 1026 * Due to a hardware bug, do not create kstat for DC systems 1027 * with PCI hw revision less than 5. 1028 */ 1029 if ((strncmp(ddi_binding_name(pcmu_p->pcmu_dip), 1030 PCICMU_OPL_DC_BINDING_NAME, strlen(PCICMU_OPL_DC_BINDING_NAME)) 1031 != 0) || (pcmu_p->pcmu_rev > 4)) { 1032 pcmu_kstat_create(pcmu_p); 1033 } 1034 done: 1035 mutex_exit(&pcmu_global_mutex); 1036 if (ret != DDI_SUCCESS) { 1037 cmn_err(CE_NOTE, "Interrupt register failure, returning 0x%x\n", 1038 ret); 1039 } 1040 return (ret); 1041 } 1042 1043 /* called by pcmu_detach() DDI_DETACH to destroy pci objects */ 1044 static void 1045 pcmu_obj_destroy(pcmu_t *pcmu_p) 1046 { 1047 mutex_enter(&pcmu_global_mutex); 1048 1049 pcmu_kstat_destroy(pcmu_p); 1050 pcmu_pbm_destroy(pcmu_p); 1051 pcmu_err_destroy(pcmu_p); 1052 pcmu_ecc_destroy(pcmu_p); 1053 pcmu_cb_destroy(pcmu_p); 1054 pcmu_ib_destroy(pcmu_p); 1055 pcmu_intr_teardown(pcmu_p); 1056 1057 mutex_exit(&pcmu_global_mutex); 1058 } 1059 1060 /* called by pcmu_attach() DDI_RESUME to (re)initialize pci objects */ 1061 static void 1062 pcmu_obj_resume(pcmu_t *pcmu_p) 1063 { 1064 mutex_enter(&pcmu_global_mutex); 1065 1066 pcmu_ib_configure(pcmu_p->pcmu_ib_p); 1067 pcmu_ecc_configure(pcmu_p); 1068 pcmu_ib_resume(pcmu_p->pcmu_ib_p); 1069 u2u_ittrans_resume((u2u_ittrans_data_t **) 1070 &(pcmu_p->pcmu_cb_p->pcb_ittrans_cookie)); 1071 1072 pcmu_pbm_configure(pcmu_p->pcmu_pcbm_p); 1073 1074 pcmu_cb_resume(pcmu_p->pcmu_cb_p); 1075 1076 pcmu_pbm_resume(pcmu_p->pcmu_pcbm_p); 1077 1078 mutex_exit(&pcmu_global_mutex); 1079 } 1080 1081 /* called by pcmu_detach() DDI_SUSPEND to suspend pci objects */ 1082 static void 1083 pcmu_obj_suspend(pcmu_t *pcmu_p) 1084 { 1085 mutex_enter(&pcmu_global_mutex); 1086 1087 pcmu_pbm_suspend(pcmu_p->pcmu_pcbm_p); 1088 pcmu_ib_suspend(pcmu_p->pcmu_ib_p); 1089 pcmu_cb_suspend(pcmu_p->pcmu_cb_p); 1090 1091 mutex_exit(&pcmu_global_mutex); 1092 } 1093 1094 static int 1095 pcmu_intr_setup(pcmu_t *pcmu_p) 1096 { 1097 dev_info_t *dip = pcmu_p->pcmu_dip; 1098 pcmu_pbm_t *pcbm_p = pcmu_p->pcmu_pcbm_p; 1099 pcmu_cb_t *pcb_p = pcmu_p->pcmu_cb_p; 1100 int i, no_of_intrs; 1101 1102 /* 1103 * Get the interrupts property. 1104 */ 1105 if (ddi_getlongprop(DDI_DEV_T_NONE, dip, DDI_PROP_DONTPASS, 1106 "interrupts", (caddr_t)&pcmu_p->pcmu_inos, 1107 &pcmu_p->pcmu_inos_len) != DDI_SUCCESS) { 1108 cmn_err(CE_PANIC, "%s%d: no interrupts property\n", 1109 ddi_driver_name(dip), ddi_get_instance(dip)); 1110 } 1111 1112 /* 1113 * figure out number of interrupts in the "interrupts" property 1114 * and convert them all into ino. 1115 */ 1116 i = ddi_getprop(DDI_DEV_T_ANY, dip, 0, "#interrupt-cells", 1); 1117 i = CELLS_1275_TO_BYTES(i); 1118 no_of_intrs = pcmu_p->pcmu_inos_len / i; 1119 for (i = 0; i < no_of_intrs; i++) { 1120 pcmu_p->pcmu_inos[i] = 1121 PCMU_IB_MONDO_TO_INO(pcmu_p->pcmu_inos[i]); 1122 } 1123 1124 pcb_p->pcb_no_of_inos = no_of_intrs; 1125 if (i = pcmu_ecc_register_intr(pcmu_p)) { 1126 goto teardown; 1127 } 1128 1129 intr_dist_add(pcmu_cb_intr_dist, pcb_p); 1130 pcmu_ecc_enable_intr(pcmu_p); 1131 1132 if (i = pcmu_pbm_register_intr(pcbm_p)) { 1133 intr_dist_rem(pcmu_cb_intr_dist, pcb_p); 1134 goto teardown; 1135 } 1136 intr_dist_add(pcmu_pbm_intr_dist, pcbm_p); 1137 pcmu_ib_intr_enable(pcmu_p, pcmu_p->pcmu_inos[CBNINTR_PBM]); 1138 1139 intr_dist_add_weighted(pcmu_ib_intr_dist_all, pcmu_p->pcmu_ib_p); 1140 return (DDI_SUCCESS); 1141 teardown: 1142 pcmu_intr_teardown(pcmu_p); 1143 return (i); 1144 } 1145 1146 /* 1147 * pcmu_fix_ranges - fixes the config space entry of the "ranges" 1148 * property on CMU-CH platforms 1149 */ 1150 void 1151 pcmu_fix_ranges(pcmu_ranges_t *rng_p, int rng_entries) 1152 { 1153 int i; 1154 for (i = 0; i < rng_entries; i++, rng_p++) { 1155 if ((rng_p->child_high & PCI_REG_ADDR_M) == PCI_ADDR_CONFIG) 1156 rng_p->parent_low |= rng_p->child_high; 1157 } 1158 } 1159 1160 /* 1161 * map_pcmu_registers 1162 * 1163 * This function is called from the attach routine to map the registers 1164 * accessed by this driver. 1165 * 1166 * used by: pcmu_attach() 1167 * 1168 * return value: DDI_FAILURE on failure 1169 */ 1170 static int 1171 map_pcmu_registers(pcmu_t *pcmu_p, dev_info_t *dip) 1172 { 1173 ddi_device_acc_attr_t attr; 1174 1175 attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; 1176 attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; 1177 1178 attr.devacc_attr_endian_flags = DDI_NEVERSWAP_ACC; 1179 if (ddi_regs_map_setup(dip, 0, &pcmu_p->pcmu_address[0], 0, 0, 1180 &attr, &pcmu_p->pcmu_ac[0]) != DDI_SUCCESS) { 1181 cmn_err(CE_WARN, "%s%d: unable to map reg entry 0\n", 1182 ddi_driver_name(dip), ddi_get_instance(dip)); 1183 return (DDI_FAILURE); 1184 } 1185 1186 /* 1187 * We still use pcmu_address[2] 1188 */ 1189 if (ddi_regs_map_setup(dip, 2, &pcmu_p->pcmu_address[2], 0, 0, 1190 &attr, &pcmu_p->pcmu_ac[2]) != DDI_SUCCESS) { 1191 cmn_err(CE_WARN, "%s%d: unable to map reg entry 2\n", 1192 ddi_driver_name(dip), ddi_get_instance(dip)); 1193 ddi_regs_map_free(&pcmu_p->pcmu_ac[0]); 1194 return (DDI_FAILURE); 1195 } 1196 1197 /* 1198 * The second register set contains the bridge's configuration 1199 * header. This header is at the very beginning of the bridge's 1200 * configuration space. This space has litte-endian byte order. 1201 */ 1202 attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC; 1203 if (ddi_regs_map_setup(dip, 1, &pcmu_p->pcmu_address[1], 0, 1204 PCI_CONF_HDR_SIZE, &attr, &pcmu_p->pcmu_ac[1]) != DDI_SUCCESS) { 1205 1206 cmn_err(CE_WARN, "%s%d: unable to map reg entry 1\n", 1207 ddi_driver_name(dip), ddi_get_instance(dip)); 1208 ddi_regs_map_free(&pcmu_p->pcmu_ac[0]); 1209 return (DDI_FAILURE); 1210 } 1211 PCMU_DBG2(PCMU_DBG_ATTACH, dip, "address (%p,%p)\n", 1212 pcmu_p->pcmu_address[0], pcmu_p->pcmu_address[1]); 1213 return (DDI_SUCCESS); 1214 } 1215 1216 /* 1217 * unmap_pcmu_registers: 1218 * 1219 * This routine unmap the registers mapped by map_pcmu_registers. 1220 * 1221 * used by: pcmu_detach() 1222 * 1223 * return value: none 1224 */ 1225 static void 1226 unmap_pcmu_registers(pcmu_t *pcmu_p) 1227 { 1228 ddi_regs_map_free(&pcmu_p->pcmu_ac[0]); 1229 ddi_regs_map_free(&pcmu_p->pcmu_ac[1]); 1230 ddi_regs_map_free(&pcmu_p->pcmu_ac[2]); 1231 } 1232 1233 /* 1234 * These convenience wrappers relies on map_pcmu_registers() to setup 1235 * pcmu_address[0-2] correctly at first. 1236 */ 1237 static uintptr_t 1238 get_reg_base(pcmu_t *pcmu_p) 1239 { 1240 return ((uintptr_t)pcmu_p->pcmu_address[2]); 1241 } 1242 1243 /* The CMU-CH config reg base is always the 2nd reg entry */ 1244 static uintptr_t 1245 get_config_reg_base(pcmu_t *pcmu_p) 1246 { 1247 return ((uintptr_t)(pcmu_p->pcmu_address[1])); 1248 } 1249 1250 uint64_t 1251 ib_get_map_reg(pcmu_ib_mondo_t mondo, uint32_t cpu_id) 1252 { 1253 return ((mondo) | (cpu_id << PCMU_INTR_MAP_REG_TID_SHIFT) | 1254 PCMU_INTR_MAP_REG_VALID); 1255 1256 } 1257 1258 uint32_t 1259 ib_map_reg_get_cpu(volatile uint64_t reg) 1260 { 1261 return ((reg & PCMU_INTR_MAP_REG_TID) >> 1262 PCMU_INTR_MAP_REG_TID_SHIFT); 1263 } 1264 1265 uint64_t * 1266 ib_intr_map_reg_addr(pcmu_ib_t *pib_p, pcmu_ib_ino_t ino) 1267 { 1268 uint64_t *addr; 1269 1270 ASSERT(ino & 0x20); 1271 addr = (uint64_t *)(pib_p->pib_obio_intr_map_regs + 1272 (((uint_t)ino & 0x1f) << 3)); 1273 return (addr); 1274 } 1275 1276 uint64_t * 1277 ib_clear_intr_reg_addr(pcmu_ib_t *pib_p, pcmu_ib_ino_t ino) 1278 { 1279 uint64_t *addr; 1280 1281 ASSERT(ino & 0x20); 1282 addr = (uint64_t *)(pib_p->pib_obio_clear_intr_regs + 1283 (((uint_t)ino & 0x1f) << 3)); 1284 return (addr); 1285 } 1286 1287 uintptr_t 1288 pcmu_ib_setup(pcmu_ib_t *pib_p) 1289 { 1290 pcmu_t *pcmu_p = pib_p->pib_pcmu_p; 1291 uintptr_t a = get_reg_base(pcmu_p); 1292 1293 pib_p->pib_ign = PCMU_ID_TO_IGN(pcmu_p->pcmu_id); 1294 pib_p->pib_max_ino = PCMU_MAX_INO; 1295 pib_p->pib_obio_intr_map_regs = a + PCMU_IB_OBIO_INTR_MAP_REG_OFFSET; 1296 pib_p->pib_obio_clear_intr_regs = 1297 a + PCMU_IB_OBIO_CLEAR_INTR_REG_OFFSET; 1298 return (a); 1299 } 1300 1301 /* 1302 * Return the cpuid to to be used for an ino. 1303 * 1304 * On multi-function pci devices, functions have separate devinfo nodes and 1305 * interrupts. 1306 * 1307 * This function determines if there is already an established slot-oriented 1308 * interrupt-to-cpu binding established, if there is then it returns that 1309 * cpu. Otherwise a new cpu is selected by intr_dist_cpuid(). 1310 * 1311 * The devinfo node we are trying to associate a cpu with is 1312 * ino_p->pino_ih_head->ih_dip. 1313 */ 1314 uint32_t 1315 pcmu_intr_dist_cpuid(pcmu_ib_t *pib_p, pcmu_ib_ino_info_t *ino_p) 1316 { 1317 dev_info_t *rdip = ino_p->pino_ih_head->ih_dip; 1318 dev_info_t *prdip = ddi_get_parent(rdip); 1319 pcmu_ib_ino_info_t *sino_p; 1320 dev_info_t *sdip; 1321 dev_info_t *psdip; 1322 char *buf1 = NULL, *buf2 = NULL; 1323 char *s1, *s2, *s3; 1324 int l2; 1325 int cpu_id; 1326 1327 /* must be CMU-CH driver parent (not ebus) */ 1328 if (strcmp(ddi_driver_name(prdip), "pcicmu") != 0) 1329 goto newcpu; 1330 1331 /* 1332 * From PCI 1275 binding: 2.2.1.3 Unit Address representation: 1333 * Since the "unit-number" is the address that appears in on Open 1334 * Firmware 'device path', it follows that only the DD and DD,FF 1335 * forms of the text representation can appear in a 'device path'. 1336 * 1337 * The rdip unit address is of the form "DD[,FF]". Define two 1338 * unit address strings that represent same-slot use: "DD" and "DD,". 1339 * The first compare uses strcmp, the second uses strncmp. 1340 */ 1341 s1 = ddi_get_name_addr(rdip); 1342 if (s1 == NULL) { 1343 goto newcpu; 1344 } 1345 1346 buf1 = kmem_alloc(MAXNAMELEN, KM_SLEEP); /* strcmp */ 1347 buf2 = kmem_alloc(MAXNAMELEN, KM_SLEEP); /* strncmp */ 1348 s1 = strcpy(buf1, s1); 1349 s2 = strcpy(buf2, s1); 1350 1351 s1 = strrchr(s1, ','); 1352 if (s1) { 1353 *s1 = '\0'; /* have "DD,FF" */ 1354 s1 = buf1; /* search via strcmp "DD" */ 1355 1356 s2 = strrchr(s2, ','); 1357 *(s2 + 1) = '\0'; 1358 s2 = buf2; 1359 l2 = strlen(s2); /* search via strncmp "DD," */ 1360 } else { 1361 (void) strcat(s2, ","); /* have "DD" */ 1362 l2 = strlen(s2); /* search via strncmp "DD," */ 1363 } 1364 1365 /* 1366 * Search the established ino list for devinfo nodes bound 1367 * to an ino that matches one of the slot use strings. 1368 */ 1369 ASSERT(MUTEX_HELD(&pib_p->pib_ino_lst_mutex)); 1370 for (sino_p = pib_p->pib_ino_lst; sino_p; sino_p = sino_p->pino_next) { 1371 /* skip self and non-established */ 1372 if ((sino_p == ino_p) || (sino_p->pino_established == 0)) 1373 continue; 1374 1375 /* skip non-siblings */ 1376 sdip = sino_p->pino_ih_head->ih_dip; 1377 psdip = ddi_get_parent(sdip); 1378 if (psdip != prdip) 1379 continue; 1380 1381 /* must be CMU-CH driver parent (not ebus) */ 1382 if (strcmp(ddi_driver_name(psdip), "pcicmu") != 0) 1383 continue; 1384 1385 s3 = ddi_get_name_addr(sdip); 1386 if ((s1 && (strcmp(s1, s3) == 0)) || 1387 (strncmp(s2, s3, l2) == 0)) { 1388 extern int intr_dist_debug; 1389 1390 if (intr_dist_debug) { 1391 cmn_err(CE_CONT, "intr_dist: " 1392 "pcicmu`pcmu_intr_dist_cpuid " 1393 "%s#%d %s: cpu %d established " 1394 "by %s#%d %s\n", ddi_driver_name(rdip), 1395 ddi_get_instance(rdip), 1396 ddi_deviname(rdip, buf1), 1397 sino_p->pino_cpuid, 1398 ddi_driver_name(sdip), 1399 ddi_get_instance(sdip), 1400 ddi_deviname(sdip, buf2)); 1401 } 1402 break; 1403 } 1404 } 1405 1406 /* If a slot use match is found then use established cpu */ 1407 if (sino_p) { 1408 cpu_id = sino_p->pino_cpuid; /* target established cpu */ 1409 goto out; 1410 } 1411 1412 newcpu: cpu_id = intr_dist_cpuid(); /* target new cpu */ 1413 1414 out: if (buf1) 1415 kmem_free(buf1, MAXNAMELEN); 1416 if (buf2) 1417 kmem_free(buf2, MAXNAMELEN); 1418 return (cpu_id); 1419 } 1420 1421 void 1422 pcmu_cb_teardown(pcmu_t *pcmu_p) 1423 { 1424 pcmu_cb_t *pcb_p = pcmu_p->pcmu_cb_p; 1425 1426 u2u_ittrans_uninit((u2u_ittrans_data_t *)pcb_p->pcb_ittrans_cookie); 1427 } 1428 1429 int 1430 pcmu_ecc_add_intr(pcmu_t *pcmu_p, int inum, pcmu_ecc_intr_info_t *eii_p) 1431 { 1432 uint32_t mondo; 1433 1434 mondo = ((pcmu_p->pcmu_cb_p->pcb_ign << PCMU_INO_BITS) | 1435 pcmu_p->pcmu_inos[inum]); 1436 1437 VERIFY(add_ivintr(mondo, pcmu_pil[inum], (intrfunc)pcmu_ecc_intr, 1438 (caddr_t)eii_p, NULL, NULL) == 0); 1439 1440 return (PCMU_ATTACH_RETCODE(PCMU_ECC_OBJ, 1441 PCMU_OBJ_INTR_ADD, DDI_SUCCESS)); 1442 } 1443 1444 /* ARGSUSED */ 1445 void 1446 pcmu_ecc_rem_intr(pcmu_t *pcmu_p, int inum, pcmu_ecc_intr_info_t *eii_p) 1447 { 1448 uint32_t mondo; 1449 1450 mondo = ((pcmu_p->pcmu_cb_p->pcb_ign << PCMU_INO_BITS) | 1451 pcmu_p->pcmu_inos[inum]); 1452 1453 VERIFY(rem_ivintr(mondo, pcmu_pil[inum]) == 0); 1454 } 1455 1456 void 1457 pcmu_pbm_configure(pcmu_pbm_t *pcbm_p) 1458 { 1459 pcmu_t *pcmu_p = pcbm_p->pcbm_pcmu_p; 1460 dev_info_t *dip = pcmu_p->pcmu_dip; 1461 1462 #define pbm_err ((PCMU_PCI_AFSR_E_MASK << PCMU_PCI_AFSR_PE_SHIFT) | \ 1463 (PCMU_PCI_AFSR_E_MASK << PCMU_PCI_AFSR_SE_SHIFT)) 1464 #define csr_err (PCI_STAT_PERROR | PCI_STAT_S_PERROR | \ 1465 PCI_STAT_R_MAST_AB | PCI_STAT_R_TARG_AB | \ 1466 PCI_STAT_S_TARG_AB | PCI_STAT_S_PERROR) 1467 1468 /* 1469 * Clear any PBM errors. 1470 */ 1471 *pcbm_p->pcbm_async_flt_status_reg = pbm_err; 1472 1473 /* 1474 * Clear error bits in configuration status register. 1475 */ 1476 PCMU_DBG1(PCMU_DBG_ATTACH, dip, 1477 "pcmu_pbm_configure: conf status reg=%x\n", csr_err); 1478 1479 pcbm_p->pcbm_config_header->ch_status_reg = csr_err; 1480 1481 PCMU_DBG1(PCMU_DBG_ATTACH, dip, 1482 "pcmu_pbm_configure: conf status reg==%x\n", 1483 pcbm_p->pcbm_config_header->ch_status_reg); 1484 1485 (void) ndi_prop_update_int(DDI_DEV_T_ANY, dip, "latency-timer", 1486 (int)pcbm_p->pcbm_config_header->ch_latency_timer_reg); 1487 #undef pbm_err 1488 #undef csr_err 1489 } 1490 1491 uint_t 1492 pcmu_pbm_disable_errors(pcmu_pbm_t *pcbm_p) 1493 { 1494 pcmu_t *pcmu_p = pcbm_p->pcbm_pcmu_p; 1495 pcmu_ib_t *pib_p = pcmu_p->pcmu_ib_p; 1496 1497 /* 1498 * Disable error and streaming byte hole interrupts via the 1499 * PBM control register. 1500 */ 1501 *pcbm_p->pcbm_ctrl_reg &= ~PCMU_PCI_CTRL_ERR_INT_EN; 1502 1503 /* 1504 * Disable error interrupts via the interrupt mapping register. 1505 */ 1506 pcmu_ib_intr_disable(pib_p, 1507 pcmu_p->pcmu_inos[CBNINTR_PBM], PCMU_IB_INTR_NOWAIT); 1508 return (BF_NONE); 1509 } 1510 1511 void 1512 pcmu_cb_setup(pcmu_t *pcmu_p) 1513 { 1514 uint64_t csr, csr_pa, pa; 1515 pcmu_cb_t *pcb_p = pcmu_p->pcmu_cb_p; 1516 1517 pcb_p->pcb_ign = PCMU_ID_TO_IGN(pcmu_p->pcmu_id); 1518 pa = (uint64_t)hat_getpfnum(kas.a_hat, pcmu_p->pcmu_address[0]); 1519 pcb_p->pcb_base_pa = pa = pa >> (32 - MMU_PAGESHIFT) << 32; 1520 pcb_p->pcb_map_pa = pa + PCMU_IB_OBIO_INTR_MAP_REG_OFFSET; 1521 pcb_p->pcb_clr_pa = pa + PCMU_IB_OBIO_CLEAR_INTR_REG_OFFSET; 1522 pcb_p->pcb_obsta_pa = pa + PCMU_IB_OBIO_INTR_STATE_DIAG_REG; 1523 1524 csr_pa = pa + PCMU_CB_CONTROL_STATUS_REG_OFFSET; 1525 csr = lddphysio(csr_pa); 1526 1527 /* 1528 * Clear any pending address parity errors. 1529 */ 1530 if (csr & PCMU_CB_CONTROL_STATUS_APERR) { 1531 csr |= PCMU_CB_CONTROL_STATUS_APERR; 1532 cmn_err(CE_WARN, "clearing UPA address parity error\n"); 1533 } 1534 csr |= PCMU_CB_CONTROL_STATUS_APCKEN; 1535 csr &= ~PCMU_CB_CONTROL_STATUS_IAP; 1536 stdphysio(csr_pa, csr); 1537 1538 u2u_ittrans_init(pcmu_p, 1539 (u2u_ittrans_data_t **)&pcb_p->pcb_ittrans_cookie); 1540 } 1541 1542 void 1543 pcmu_ecc_setup(pcmu_ecc_t *pecc_p) 1544 { 1545 pecc_p->pecc_ue.pecc_errpndg_mask = 0; 1546 pecc_p->pecc_ue.pecc_offset_mask = PCMU_ECC_UE_AFSR_DW_OFFSET; 1547 pecc_p->pecc_ue.pecc_offset_shift = PCMU_ECC_UE_AFSR_DW_OFFSET_SHIFT; 1548 pecc_p->pecc_ue.pecc_size_log2 = 3; 1549 } 1550 1551 static uintptr_t 1552 get_pbm_reg_base(pcmu_t *pcmu_p) 1553 { 1554 return ((uintptr_t)(pcmu_p->pcmu_address[0])); 1555 } 1556 1557 void 1558 pcmu_pbm_setup(pcmu_pbm_t *pcbm_p) 1559 { 1560 pcmu_t *pcmu_p = pcbm_p->pcbm_pcmu_p; 1561 1562 /* 1563 * Get the base virtual address for the PBM control block. 1564 */ 1565 uintptr_t a = get_pbm_reg_base(pcmu_p); 1566 1567 /* 1568 * Get the virtual address of the PCI configuration header. 1569 * This should be mapped little-endian. 1570 */ 1571 pcbm_p->pcbm_config_header = 1572 (config_header_t *)get_config_reg_base(pcmu_p); 1573 1574 /* 1575 * Get the virtual addresses for control, error and diag 1576 * registers. 1577 */ 1578 pcbm_p->pcbm_ctrl_reg = (uint64_t *)(a + PCMU_PCI_CTRL_REG_OFFSET); 1579 pcbm_p->pcbm_diag_reg = (uint64_t *)(a + PCMU_PCI_DIAG_REG_OFFSET); 1580 pcbm_p->pcbm_async_flt_status_reg = 1581 (uint64_t *)(a + PCMU_PCI_ASYNC_FLT_STATUS_REG_OFFSET); 1582 pcbm_p->pcbm_async_flt_addr_reg = 1583 (uint64_t *)(a + PCMU_PCI_ASYNC_FLT_ADDR_REG_OFFSET); 1584 } 1585 1586 /*ARGSUSED*/ 1587 void 1588 pcmu_pbm_teardown(pcmu_pbm_t *pcbm_p) 1589 { 1590 } 1591 1592 int 1593 pcmu_get_numproxy(dev_info_t *dip) 1594 { 1595 return (ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 1596 "#upa-interrupt-proxies", 1)); 1597 } 1598 1599 int 1600 pcmu_get_portid(dev_info_t *dip) 1601 { 1602 return (ddi_getprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 1603 "portid", -1)); 1604 } 1605 1606 /* 1607 * CMU-CH Performance Events. 1608 */ 1609 static pcmu_kev_mask_t 1610 pcicmu_pcmu_events[] = { 1611 {"pio_cycles_b", 0xf}, {"interrupts", 0x11}, 1612 {"upa_inter_nack", 0x12}, {"pio_reads", 0x13}, 1613 {"pio_writes", 0x14}, 1614 {"clear_pic", 0x1f} 1615 }; 1616 1617 /* 1618 * Create the picN kstat's. 1619 */ 1620 void 1621 pcmu_kstat_init() 1622 { 1623 pcmu_name_kstat = (pcmu_ksinfo_t *)kmem_alloc(sizeof (pcmu_ksinfo_t), 1624 KM_NOSLEEP); 1625 1626 if (pcmu_name_kstat == NULL) { 1627 cmn_err(CE_WARN, "pcicmu : no space for kstat\n"); 1628 } else { 1629 pcmu_name_kstat->pic_no_evs = 1630 sizeof (pcicmu_pcmu_events) / sizeof (pcmu_kev_mask_t); 1631 pcmu_name_kstat->pic_shift[0] = PCMU_SHIFT_PIC0; 1632 pcmu_name_kstat->pic_shift[1] = PCMU_SHIFT_PIC1; 1633 pcmu_create_name_kstat("pcmup", 1634 pcmu_name_kstat, pcicmu_pcmu_events); 1635 } 1636 } 1637 1638 /* 1639 * Called from _fini() 1640 */ 1641 void 1642 pcmu_kstat_fini() 1643 { 1644 if (pcmu_name_kstat != NULL) { 1645 pcmu_delete_name_kstat(pcmu_name_kstat); 1646 kmem_free(pcmu_name_kstat, sizeof (pcmu_ksinfo_t)); 1647 pcmu_name_kstat = NULL; 1648 } 1649 } 1650 1651 /* 1652 * Create the performance 'counters' kstat. 1653 */ 1654 void 1655 pcmu_add_upstream_kstat(pcmu_t *pcmu_p) 1656 { 1657 pcmu_cntr_pa_t *cntr_pa_p = &pcmu_p->pcmu_uks_pa; 1658 uint64_t regbase = va_to_pa((void *)get_reg_base(pcmu_p)); 1659 1660 cntr_pa_p->pcr_pa = regbase + PCMU_PERF_PCR_OFFSET; 1661 cntr_pa_p->pic_pa = regbase + PCMU_PERF_PIC_OFFSET; 1662 pcmu_p->pcmu_uksp = pcmu_create_cntr_kstat(pcmu_p, "pcmup", 1663 NUM_OF_PICS, pcmu_cntr_kstat_pa_update, cntr_pa_p); 1664 } 1665 1666 /* 1667 * u2u_ittrans_init() is caled from in pci.c's pcmu_cb_setup() per CMU. 1668 * Second argument "ittrans_cookie" is address of pcb_ittrans_cookie in 1669 * pcb_p member. allocated interrupt block is returned in it. 1670 */ 1671 static void 1672 u2u_ittrans_init(pcmu_t *pcmu_p, u2u_ittrans_data_t **ittrans_cookie) 1673 { 1674 1675 u2u_ittrans_data_t *u2u_trans_p; 1676 ddi_device_acc_attr_t attr; 1677 int ret; 1678 int board; 1679 1680 /* 1681 * Allocate the data structure to support U2U's 1682 * interrupt target translations. 1683 */ 1684 u2u_trans_p = (u2u_ittrans_data_t *) 1685 kmem_zalloc(sizeof (u2u_ittrans_data_t), KM_SLEEP); 1686 1687 /* 1688 * Get other properties, "board#" 1689 */ 1690 board = ddi_getprop(DDI_DEV_T_ANY, pcmu_p->pcmu_dip, 1691 DDI_PROP_DONTPASS, "board#", -1); 1692 1693 u2u_trans_p->u2u_board = board; 1694 1695 if (board == -1) { 1696 /* this cannot happen on production systems */ 1697 cmn_err(CE_PANIC, "u2u:Invalid property;board = %d", board); 1698 } 1699 1700 /* 1701 * Initialize interrupt target translations mutex. 1702 */ 1703 mutex_init(&(u2u_trans_p->u2u_ittrans_lock), "u2u_ittrans_lock", 1704 MUTEX_DEFAULT, NULL); 1705 1706 /* 1707 * Get U2U's registers space by ddi_regs_map_setup(9F) 1708 */ 1709 attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; 1710 attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; 1711 attr.devacc_attr_endian_flags = DDI_NEVERSWAP_ACC; 1712 1713 ret = ddi_regs_map_setup(pcmu_p->pcmu_dip, 1714 REGS_INDEX_OF_U2U, (caddr_t *)(&(u2u_trans_p->u2u_regs_base)), 1715 0, 0, &attr, &(u2u_trans_p->u2u_acc)); 1716 1717 /* 1718 * check result of ddi_regs_map_setup(). 1719 */ 1720 if (ret != DDI_SUCCESS) { 1721 cmn_err(CE_PANIC, "u2u%d: registers map setup failed", board); 1722 } 1723 1724 /* 1725 * Read Port-id(1 byte) in u2u 1726 */ 1727 u2u_trans_p->u2u_port_id = *(volatile int32_t *) 1728 (u2u_trans_p->u2u_regs_base + U2U_PID_REGISTER_OFFSET); 1729 1730 if (pcmu_p->pcmu_id != u2u_trans_p->u2u_port_id) { 1731 cmn_err(CE_PANIC, "u2u%d: Invalid Port-ID", board); 1732 } 1733 1734 *ittrans_cookie = u2u_trans_p; 1735 } 1736 1737 /* 1738 * u2u_ittras_resume() is called from pcmu_obj_resume() at DDI_RESUME entry. 1739 */ 1740 static void 1741 u2u_ittrans_resume(u2u_ittrans_data_t **ittrans_cookie) 1742 { 1743 1744 u2u_ittrans_data_t *u2u_trans_p; 1745 u2u_ittrans_id_t *ittrans_id_p; 1746 uintptr_t data_reg_addr; 1747 int ix; 1748 1749 u2u_trans_p = *ittrans_cookie; 1750 1751 /* 1752 * Set U2U Data Register 1753 */ 1754 for (ix = 0; ix < U2U_DATA_NUM; ix++) { 1755 ittrans_id_p = &(u2u_trans_p->u2u_ittrans_id[ix]); 1756 data_reg_addr = u2u_trans_p->u2u_regs_base + 1757 U2U_DATA_REGISTER_OFFSET + (ix * sizeof (uint64_t)); 1758 if (ittrans_id_p->u2u_ino_map_reg == NULL) { 1759 /* This index was not set */ 1760 continue; 1761 } 1762 *(volatile uint32_t *) (data_reg_addr) = 1763 (uint32_t)ittrans_id_p->u2u_tgt_cpu_id; 1764 1765 } 1766 } 1767 1768 /* 1769 * u2u_ittras_uninit() is called from ib_destroy() at detach, 1770 * or occuring error in attach. 1771 */ 1772 static void 1773 u2u_ittrans_uninit(u2u_ittrans_data_t *ittrans_cookie) 1774 { 1775 1776 if (ittrans_cookie == NULL) { 1777 return; /* not support */ 1778 } 1779 1780 if (ittrans_cookie == (u2u_ittrans_data_t *)(-1)) { 1781 return; /* illeagal case */ 1782 } 1783 1784 ddi_regs_map_free(&(ittrans_cookie->u2u_acc)); 1785 mutex_destroy(&(ittrans_cookie->u2u_ittrans_lock)); 1786 kmem_free((void *)ittrans_cookie, sizeof (u2u_ittrans_data_t)); 1787 } 1788 1789 /* 1790 * This routine,u2u_translate_tgtid(, , cpu_id, pino_map_reg), 1791 * searches index having same value of pino_map_reg, or empty. 1792 * Then, stores cpu_id in a U2U Data Register as this index, 1793 * and return this index. 1794 */ 1795 int 1796 u2u_translate_tgtid(pcmu_t *pcmu_p, uint_t cpu_id, 1797 volatile uint64_t *pino_map_reg) 1798 { 1799 1800 int index = -1; 1801 int ix; 1802 int err_level; /* severity level for cmn_err */ 1803 u2u_ittrans_id_t *ittrans_id_p; 1804 uintptr_t data_reg_addr; 1805 u2u_ittrans_data_t *ittrans_cookie; 1806 1807 ittrans_cookie = 1808 (u2u_ittrans_data_t *)(pcmu_p->pcmu_cb_p->pcb_ittrans_cookie); 1809 1810 if (ittrans_cookie == NULL) { 1811 return (cpu_id); 1812 } 1813 1814 if (ittrans_cookie == (u2u_ittrans_data_t *)(-1)) { 1815 return (-1); /* illeagal case */ 1816 } 1817 1818 mutex_enter(&(ittrans_cookie->u2u_ittrans_lock)); 1819 1820 /* 1821 * Decide index No. of U2U Data registers in either 1822 * already used by same pino_map_reg, or empty. 1823 */ 1824 for (ix = 0; ix < U2U_DATA_NUM; ix++) { 1825 ittrans_id_p = &(ittrans_cookie->u2u_ittrans_id[ix]); 1826 if (ittrans_id_p->u2u_ino_map_reg == pino_map_reg) { 1827 /* already used this pino_map_reg */ 1828 index = ix; 1829 break; 1830 } 1831 if (index == -1 && 1832 ittrans_id_p->u2u_ino_map_reg == NULL) { 1833 index = ix; 1834 } 1835 } 1836 1837 if (index == -1) { 1838 if (panicstr) { 1839 err_level = CE_WARN; 1840 } else { 1841 err_level = CE_PANIC; 1842 } 1843 cmn_err(err_level, "u2u%d:No more U2U-Data regs!!", 1844 ittrans_cookie->u2u_board); 1845 return (cpu_id); 1846 } 1847 1848 /* 1849 * For U2U 1850 * set cpu_id into u2u_data_reg by index. 1851 * ((uint64_t)(u2u_regs_base 1852 * + U2U_DATA_REGISTER_OFFSET))[index] = cpu_id; 1853 */ 1854 1855 data_reg_addr = ittrans_cookie->u2u_regs_base 1856 + U2U_DATA_REGISTER_OFFSET 1857 + (index * sizeof (uint64_t)); 1858 1859 /* 1860 * Set cpu_id into U2U Data register[index] 1861 */ 1862 *(volatile uint32_t *) (data_reg_addr) = (uint32_t)cpu_id; 1863 1864 /* 1865 * Setup for software, excepting at panicing. 1866 * and rebooting, etc...? 1867 */ 1868 if (!panicstr) { 1869 ittrans_id_p = &(ittrans_cookie->u2u_ittrans_id[index]); 1870 ittrans_id_p->u2u_tgt_cpu_id = cpu_id; 1871 ittrans_id_p->u2u_ino_map_reg = pino_map_reg; 1872 } 1873 1874 mutex_exit(&(ittrans_cookie->u2u_ittrans_lock)); 1875 1876 return (index); 1877 } 1878 1879 /* 1880 * u2u_ittrans_cleanup() is called from common_pcmu_ib_intr_disable() 1881 * after called intr_rem_cpu(mondo). 1882 */ 1883 void 1884 u2u_ittrans_cleanup(u2u_ittrans_data_t *ittrans_cookie, 1885 volatile uint64_t *pino_map_reg) 1886 { 1887 1888 int ix; 1889 u2u_ittrans_id_t *ittrans_id_p; 1890 1891 if (ittrans_cookie == NULL) { 1892 return; 1893 } 1894 1895 if (ittrans_cookie == (u2u_ittrans_data_t *)(-1)) { 1896 return; /* illeagal case */ 1897 } 1898 1899 mutex_enter(&(ittrans_cookie->u2u_ittrans_lock)); 1900 1901 for (ix = 0; ix < U2U_DATA_NUM; ix++) { 1902 ittrans_id_p = &(ittrans_cookie->u2u_ittrans_id[ix]); 1903 if (ittrans_id_p->u2u_ino_map_reg == pino_map_reg) { 1904 ittrans_id_p->u2u_ino_map_reg = NULL; 1905 break; 1906 } 1907 } 1908 1909 mutex_exit(&(ittrans_cookie->u2u_ittrans_lock)); 1910 } 1911 1912 /* 1913 * pcmu_ecc_classify, called by ecc_handler to classify ecc errors 1914 * and determine if we should panic or not. 1915 */ 1916 void 1917 pcmu_ecc_classify(uint64_t err, pcmu_ecc_errstate_t *ecc_err_p) 1918 { 1919 struct async_flt *ecc = &ecc_err_p->ecc_aflt; 1920 /* LINTED */ 1921 pcmu_t *pcmu_p = ecc_err_p->ecc_ii_p.pecc_p->pecc_pcmu_p; 1922 1923 ASSERT(MUTEX_HELD(&pcmu_p->pcmu_err_mutex)); 1924 1925 ecc_err_p->ecc_bridge_type = PCI_OPLCMU; /* RAGS */ 1926 /* 1927 * Get the parent bus id that caused the error. 1928 */ 1929 ecc_err_p->ecc_dev_id = (ecc_err_p->ecc_afsr & PCMU_ECC_UE_AFSR_ID) 1930 >> PCMU_ECC_UE_AFSR_ID_SHIFT; 1931 /* 1932 * Determine the doubleword offset of the error. 1933 */ 1934 ecc_err_p->ecc_dw_offset = (ecc_err_p->ecc_afsr & 1935 PCMU_ECC_UE_AFSR_DW_OFFSET) >> PCMU_ECC_UE_AFSR_DW_OFFSET_SHIFT; 1936 /* 1937 * Determine the primary error type. 1938 */ 1939 switch (err) { 1940 case PCMU_ECC_UE_AFSR_E_PIO: 1941 if (ecc_err_p->pecc_pri) { 1942 ecc->flt_erpt_class = PCI_ECC_PIO_UE; 1943 } else { 1944 ecc->flt_erpt_class = PCI_ECC_SEC_PIO_UE; 1945 } 1946 /* For CMU-CH, a UE is always fatal. */ 1947 ecc->flt_panic = 1; 1948 break; 1949 1950 default: 1951 return; 1952 } 1953 } 1954 1955 /* 1956 * pcmu_pbm_classify, called by pcmu_pbm_afsr_report to classify piow afsr. 1957 */ 1958 int 1959 pcmu_pbm_classify(pcmu_pbm_errstate_t *pbm_err_p) 1960 { 1961 uint32_t e; 1962 int nerr = 0; 1963 char **tmp_class; 1964 1965 if (pbm_err_p->pcbm_pri) { 1966 tmp_class = &pbm_err_p->pcbm_pci.pcmu_err_class; 1967 e = PBM_AFSR_TO_PRIERR(pbm_err_p->pbm_afsr); 1968 pbm_err_p->pbm_log = FM_LOG_PCI; 1969 } else { 1970 tmp_class = &pbm_err_p->pbm_err_class; 1971 e = PBM_AFSR_TO_SECERR(pbm_err_p->pbm_afsr); 1972 pbm_err_p->pbm_log = FM_LOG_PBM; 1973 } 1974 1975 if (e & PCMU_PCI_AFSR_E_MA) { 1976 *tmp_class = pbm_err_p->pcbm_pri ? PCI_MA : PCI_SEC_MA; 1977 nerr++; 1978 } 1979 return (nerr); 1980 } 1981 1982 /* 1983 * Function used to clear PBM/PCI/IOMMU error state after error handling 1984 * is complete. Only clearing error bits which have been logged. Called by 1985 * pcmu_pbm_err_handler and pcmu_bus_exit. 1986 */ 1987 static void 1988 pcmu_clear_error(pcmu_t *pcmu_p, pcmu_pbm_errstate_t *pbm_err_p) 1989 { 1990 pcmu_pbm_t *pcbm_p = pcmu_p->pcmu_pcbm_p; 1991 1992 ASSERT(MUTEX_HELD(&pcbm_p->pcbm_pcmu_p->pcmu_err_mutex)); 1993 1994 *pcbm_p->pcbm_ctrl_reg = pbm_err_p->pbm_ctl_stat; 1995 *pcbm_p->pcbm_async_flt_status_reg = pbm_err_p->pbm_afsr; 1996 pcbm_p->pcbm_config_header->ch_status_reg = 1997 pbm_err_p->pcbm_pci.pcmu_cfg_stat; 1998 } 1999 2000 /*ARGSUSED*/ 2001 int 2002 pcmu_pbm_err_handler(dev_info_t *dip, ddi_fm_error_t *derr, 2003 const void *impl_data, int caller) 2004 { 2005 int fatal = 0; 2006 int nonfatal = 0; 2007 int unknown = 0; 2008 uint32_t prierr, secerr; 2009 pcmu_pbm_errstate_t pbm_err; 2010 pcmu_t *pcmu_p = (pcmu_t *)impl_data; 2011 int ret = 0; 2012 2013 ASSERT(MUTEX_HELD(&pcmu_p->pcmu_err_mutex)); 2014 pcmu_pbm_errstate_get(pcmu_p, &pbm_err); 2015 2016 derr->fme_ena = derr->fme_ena ? derr->fme_ena : 2017 fm_ena_generate(0, FM_ENA_FMT1); 2018 2019 prierr = PBM_AFSR_TO_PRIERR(pbm_err.pbm_afsr); 2020 secerr = PBM_AFSR_TO_SECERR(pbm_err.pbm_afsr); 2021 2022 if (derr->fme_flag == DDI_FM_ERR_PEEK) { 2023 /* 2024 * For ddi_peek treat all events as nonfatal. We only 2025 * really call this function so that pcmu_clear_error() 2026 * and ndi_fm_handler_dispatch() will get called. 2027 */ 2028 nonfatal++; 2029 goto done; 2030 } else if (derr->fme_flag == DDI_FM_ERR_POKE) { 2031 /* 2032 * For ddi_poke we can treat as nonfatal if the 2033 * following conditions are met : 2034 * 1. Make sure only primary error is MA/TA 2035 * 2. Make sure no secondary error 2036 * 3. check pci config header stat reg to see MA/TA is 2037 * logged. We cannot verify only MA/TA is recorded 2038 * since it gets much more complicated when a 2039 * PCI-to-PCI bridge is present. 2040 */ 2041 if ((prierr == PCMU_PCI_AFSR_E_MA) && !secerr && 2042 (pbm_err.pcbm_pci.pcmu_cfg_stat & PCI_STAT_R_MAST_AB)) { 2043 nonfatal++; 2044 goto done; 2045 } 2046 } 2047 2048 if (prierr || secerr) { 2049 ret = pcmu_pbm_afsr_report(dip, derr->fme_ena, &pbm_err); 2050 if (ret == DDI_FM_FATAL) { 2051 fatal++; 2052 } else { 2053 nonfatal++; 2054 } 2055 } 2056 2057 ret = pcmu_cfg_report(dip, derr, &pbm_err.pcbm_pci, caller, prierr); 2058 if (ret == DDI_FM_FATAL) { 2059 fatal++; 2060 } else if (ret == DDI_FM_NONFATAL) { 2061 nonfatal++; 2062 } 2063 2064 done: 2065 if (ret == DDI_FM_FATAL) { 2066 fatal++; 2067 } else if (ret == DDI_FM_NONFATAL) { 2068 nonfatal++; 2069 } else if (ret == DDI_FM_UNKNOWN) { 2070 unknown++; 2071 } 2072 2073 /* Cleanup and reset error bits */ 2074 pcmu_clear_error(pcmu_p, &pbm_err); 2075 2076 return (fatal ? DDI_FM_FATAL : (nonfatal ? DDI_FM_NONFATAL : 2077 (unknown ? DDI_FM_UNKNOWN : DDI_FM_OK))); 2078 } 2079 2080 int 2081 pcmu_check_error(pcmu_t *pcmu_p) 2082 { 2083 pcmu_pbm_t *pcbm_p = pcmu_p->pcmu_pcbm_p; 2084 uint16_t pcmu_cfg_stat; 2085 uint64_t pbm_afsr; 2086 2087 ASSERT(MUTEX_HELD(&pcmu_p->pcmu_err_mutex)); 2088 2089 pcmu_cfg_stat = pcbm_p->pcbm_config_header->ch_status_reg; 2090 pbm_afsr = *pcbm_p->pcbm_async_flt_status_reg; 2091 2092 if ((pcmu_cfg_stat & (PCI_STAT_S_PERROR | PCI_STAT_S_TARG_AB | 2093 PCI_STAT_R_TARG_AB | PCI_STAT_R_MAST_AB | 2094 PCI_STAT_S_SYSERR | PCI_STAT_PERROR)) || 2095 (PBM_AFSR_TO_PRIERR(pbm_afsr))) { 2096 return (1); 2097 } 2098 return (0); 2099 2100 } 2101 2102 /* 2103 * Function used to gather PBM/PCI error state for the 2104 * pcmu_pbm_err_handler. This function must be called while pcmu_err_mutex 2105 * is held. 2106 */ 2107 static void 2108 pcmu_pbm_errstate_get(pcmu_t *pcmu_p, pcmu_pbm_errstate_t *pbm_err_p) 2109 { 2110 pcmu_pbm_t *pcbm_p = pcmu_p->pcmu_pcbm_p; 2111 2112 ASSERT(MUTEX_HELD(&pcmu_p->pcmu_err_mutex)); 2113 bzero(pbm_err_p, sizeof (pcmu_pbm_errstate_t)); 2114 2115 /* 2116 * Capture all pbm error state for later logging 2117 */ 2118 pbm_err_p->pbm_bridge_type = PCI_OPLCMU; /* RAGS */ 2119 pbm_err_p->pcbm_pci.pcmu_cfg_stat = 2120 pcbm_p->pcbm_config_header->ch_status_reg; 2121 pbm_err_p->pbm_ctl_stat = *pcbm_p->pcbm_ctrl_reg; 2122 pbm_err_p->pcbm_pci.pcmu_cfg_comm = 2123 pcbm_p->pcbm_config_header->ch_command_reg; 2124 pbm_err_p->pbm_afsr = *pcbm_p->pcbm_async_flt_status_reg; 2125 pbm_err_p->pbm_afar = *pcbm_p->pcbm_async_flt_addr_reg; 2126 pbm_err_p->pcbm_pci.pcmu_pa = *pcbm_p->pcbm_async_flt_addr_reg; 2127 } 2128 2129 static void 2130 pcmu_pbm_clear_error(pcmu_pbm_t *pcbm_p) 2131 { 2132 uint64_t pbm_afsr; 2133 2134 /* 2135 * for poke() support - called from POKE_FLUSH. Spin waiting 2136 * for MA, TA or SERR to be cleared by a pcmu_pbm_error_intr(). 2137 * We have to wait for SERR too in case the device is beyond 2138 * a pci-pci bridge. 2139 */ 2140 pbm_afsr = *pcbm_p->pcbm_async_flt_status_reg; 2141 while (((pbm_afsr >> PCMU_PCI_AFSR_PE_SHIFT) & 2142 (PCMU_PCI_AFSR_E_MA | PCMU_PCI_AFSR_E_TA))) { 2143 pbm_afsr = *pcbm_p->pcbm_async_flt_status_reg; 2144 } 2145 } 2146 2147 void 2148 pcmu_err_create(pcmu_t *pcmu_p) 2149 { 2150 /* 2151 * PCI detected ECC errorq, to schedule async handling 2152 * of ECC errors and logging. 2153 * The errorq is created here but destroyed when _fini is called 2154 * for the pci module. 2155 */ 2156 if (pcmu_ecc_queue == NULL) { 2157 pcmu_ecc_queue = errorq_create("pcmu_ecc_queue", 2158 (errorq_func_t)pcmu_ecc_err_drain, 2159 (void *)NULL, 2160 ECC_MAX_ERRS, sizeof (pcmu_ecc_errstate_t), 2161 PIL_2, ERRORQ_VITAL); 2162 if (pcmu_ecc_queue == NULL) 2163 panic("failed to create required system error queue"); 2164 } 2165 2166 /* 2167 * Initialize error handling mutex. 2168 */ 2169 mutex_init(&pcmu_p->pcmu_err_mutex, NULL, MUTEX_DRIVER, 2170 (void *)pcmu_p->pcmu_fm_ibc); 2171 } 2172 2173 void 2174 pcmu_err_destroy(pcmu_t *pcmu_p) 2175 { 2176 mutex_destroy(&pcmu_p->pcmu_err_mutex); 2177 } 2178 2179 /* 2180 * Function used to post PCI block module specific ereports. 2181 */ 2182 void 2183 pcmu_pbm_ereport_post(dev_info_t *dip, uint64_t ena, 2184 pcmu_pbm_errstate_t *pbm_err) 2185 { 2186 char *aux_msg; 2187 uint32_t prierr, secerr; 2188 pcmu_t *pcmu_p; 2189 int instance = ddi_get_instance(dip); 2190 2191 ena = ena ? ena : fm_ena_generate(0, FM_ENA_FMT1); 2192 2193 pcmu_p = get_pcmu_soft_state(instance); 2194 prierr = PBM_AFSR_TO_PRIERR(pbm_err->pbm_afsr); 2195 secerr = PBM_AFSR_TO_SECERR(pbm_err->pbm_afsr); 2196 if (prierr) 2197 aux_msg = "PCI primary error: Master Abort"; 2198 else if (secerr) 2199 aux_msg = "PCI secondary error: Master Abort"; 2200 else 2201 aux_msg = ""; 2202 cmn_err(CE_WARN, "%s %s: %s %s=0x%lx, %s=0x%lx, %s=0x%lx %s=0x%x", 2203 (pcmu_p->pcmu_pcbm_p)->pcbm_nameinst_str, 2204 (pcmu_p->pcmu_pcbm_p)->pcbm_nameaddr_str, 2205 aux_msg, 2206 PCI_PBM_AFAR, pbm_err->pbm_afar, 2207 PCI_PBM_AFSR, pbm_err->pbm_afsr, 2208 PCI_PBM_CSR, pbm_err->pbm_ctl_stat, 2209 "portid", pcmu_p->pcmu_id); 2210 } 2211
Indexes created Wed Feb 10 08:45:31 UTC 2010
Terms of Use |
Privacy |
Trademarks |
Copyright Policy |
Site Guidelines |
Site Map |
Help
Your use of this web site or any of its content or software indicates your agreement to be bound by these Terms of Use.
© 2010, Oracle Corporation and/or its affiliates
