Home | History | Annotate | Download | only in targets
      1 /*
      2  * CDDL HEADER START
      3  *
      4  * The contents of this file are subject to the terms of the
      5  * Common Development and Distribution License (the "License").
      6  * You may not use this file except in compliance with the License.
      7  *
      8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
      9  * or http://www.opensolaris.org/os/licensing.
     10  * See the License for the specific language governing permissions
     11  * and limitations under the License.
     12  *
     13  * When distributing Covered Code, include this CDDL HEADER in each
     14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
     15  * If applicable, add the following below this CDDL HEADER, with the
     16  * fields enclosed by brackets "[]" replaced with your own identifying
     17  * information: Portions Copyright [yyyy] [name of copyright owner]
     18  *
     19  * CDDL HEADER END
     20  */
     21 
     22 /*
     23  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
     24  * Use is subject to license terms.
     25  */
     26 
     27 
     28 /*
     29  * Direct Attached  disk driver for SPARC machines.
     30  */
     31 
     32 /*
     33  * Includes, Declarations and Local Data
     34  */
     35 #include <sys/dada/dada.h>
     36 #include <sys/dkbad.h>
     37 #include <sys/dklabel.h>
     38 #include <sys/dkio.h>
     39 #include <sys/cdio.h>
     40 #include <sys/vtoc.h>
     41 #include <sys/dada/targets/daddef.h>
     42 #include <sys/dada/targets/dadpriv.h>
     43 #include <sys/file.h>
     44 #include <sys/stat.h>
     45 #include <sys/kstat.h>
     46 #include <sys/vtrace.h>
     47 #include <sys/aio_req.h>
     48 #include <sys/note.h>
     49 #include <sys/cmlb.h>
     50 
     51 /*
     52  * Global Error Levels for Error Reporting
     53  */
     54 int dcd_error_level	= DCD_ERR_RETRYABLE;
     55 /*
     56  * Local Static Data
     57  */
     58 
     59 static int dcd_io_time		= DCD_IO_TIME;
     60 static int dcd_retry_count	= DCD_RETRY_COUNT;
     61 #ifndef lint
     62 static int dcd_report_pfa = 1;
     63 #endif
     64 static int dcd_rot_delay = 4;
     65 static int dcd_poll_busycnt = DCD_POLL_TIMEOUT;
     66 
     67 /*
     68  * Local Function Prototypes
     69  */
     70 
     71 static int dcdopen(dev_t *dev_p, int flag, int otyp, cred_t *cred_p);
     72 static int dcdclose(dev_t dev, int flag, int otyp, cred_t *cred_p);
     73 static int dcdstrategy(struct buf *bp);
     74 static int dcddump(dev_t dev, caddr_t addr, daddr_t blkno, int nblk);
     75 static int dcdioctl(dev_t, int, intptr_t, int, cred_t *, int *);
     76 static int dcdread(dev_t dev, struct uio *uio, cred_t *cred_p);
     77 static int dcdwrite(dev_t dev, struct uio *uio, cred_t *cred_p);
     78 static int dcd_prop_op(dev_t, dev_info_t *, ddi_prop_op_t, int,
     79     char *, caddr_t, int *);
     80 static int dcdaread(dev_t dev, struct aio_req *aio, cred_t *cred_p);
     81 static int dcdawrite(dev_t dev, struct aio_req *aio, cred_t *cred_p);
     82 
     83 
     84 static void dcd_free_softstate(struct dcd_disk *un, dev_info_t *devi);
     85 static int dcd_doattach(dev_info_t *devi, int (*f)());
     86 static int dcd_validate_geometry(struct dcd_disk *un);
     87 static ddi_devid_t dcd_get_devid(struct dcd_disk *un);
     88 static ddi_devid_t  dcd_create_devid(struct dcd_disk *un);
     89 static int dcd_make_devid_from_serial(struct dcd_disk *un);
     90 static void dcd_validate_model_serial(char *str, int *retlen, int totallen);
     91 static int dcd_read_deviceid(struct dcd_disk *un);
     92 static int dcd_write_deviceid(struct dcd_disk *un);
     93 static int dcd_poll(struct dcd_pkt *pkt);
     94 static char *dcd_rname(int reason);
     95 static void dcd_flush_cache(struct dcd_disk *un);
     96 
     97 static int dcd_compute_dk_capacity(struct dcd_device *devp,
     98     diskaddr_t *capacity);
     99 static int dcd_send_lb_rw_cmd(dev_info_t *devinfo, void *bufaddr,
    100     diskaddr_t start_block, size_t reqlength, uchar_t cmd);
    101 
    102 static void dcdmin(struct buf *bp);
    103 
    104 static int dcdioctl_cmd(dev_t, struct udcd_cmd *,
    105     enum uio_seg, enum uio_seg);
    106 
    107 static void dcdstart(struct dcd_disk *un);
    108 static void dcddone_and_mutex_exit(struct dcd_disk *un, struct buf *bp);
    109 static void make_dcd_cmd(struct dcd_disk *un, struct buf *bp, int (*f)());
    110 static void dcdudcdmin(struct buf *bp);
    111 
    112 static int dcdrunout(caddr_t);
    113 static int dcd_check_wp(dev_t dev);
    114 static int dcd_unit_ready(dev_t dev);
    115 static void dcd_handle_tran_busy(struct buf *bp, struct diskhd *dp,
    116     struct dcd_disk *un);
    117 static void dcdintr(struct dcd_pkt *pkt);
    118 static int dcd_handle_incomplete(struct dcd_disk *un, struct buf *bp);
    119 static void dcd_offline(struct dcd_disk *un, int bechatty);
    120 static int dcd_ready_and_valid(dev_t dev, struct dcd_disk *un);
    121 static void dcd_reset_disk(struct dcd_disk *un, struct dcd_pkt *pkt);
    122 static void dcd_translate(struct dadkio_status32 *statp, struct udcd_cmd *cmdp);
    123 static int dcdflushdone(struct buf *bp);
    124 
    125 /* Function prototypes for cmlb */
    126 
    127 static int dcd_lb_rdwr(dev_info_t *devi, uchar_t cmd, void *bufaddr,
    128     diskaddr_t start_block, size_t reqlength, void *tg_cookie);
    129 
    130 static int dcd_lb_getphygeom(dev_info_t *devi, cmlb_geom_t *phygeomp);
    131 static int dcd_lb_getinfo(dev_info_t *devi, int cmd, void *arg,
    132     void *tg_cookie);
    133 
    134 
    135 static cmlb_tg_ops_t dcd_lb_ops = {
    136 	TG_DK_OPS_VERSION_1,
    137 	dcd_lb_rdwr,
    138 	dcd_lb_getinfo
    139 };
    140 
    141 /*
    142  * Error and Logging Functions
    143  */
    144 #ifndef lint
    145 static void clean_print(dev_info_t *dev, char *label, uint_t level,
    146     char *title, char *data, int len);
    147 static void dcdrestart(void *arg);
    148 #endif /* lint */
    149 
    150 static int dcd_check_error(struct dcd_disk *un, struct buf *bp);
    151 
    152 /*
    153  * Error statistics create/update functions
    154  */
    155 static int dcd_create_errstats(struct dcd_disk *, int);
    156 
    157 
    158 
    159 /*PRINTFLIKE4*/
    160 extern void dcd_log(dev_info_t *, char *, uint_t, const char *, ...)
    161     __KPRINTFLIKE(4);
    162 extern void makecommand(struct dcd_pkt *, int, uchar_t, uint32_t,
    163     uchar_t, uint32_t, uchar_t, uchar_t);
    164 
    165 
    166 /*
    167  * Configuration Routines
    168  */
    169 static int dcdinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg,
    170     void **result);
    171 static int dcdprobe(dev_info_t *devi);
    172 static int dcdattach(dev_info_t *devi, ddi_attach_cmd_t cmd);
    173 static int dcddetach(dev_info_t *devi, ddi_detach_cmd_t cmd);
    174 static int dcdreset(dev_info_t *dip, ddi_reset_cmd_t cmd);
    175 static int dcd_dr_detach(dev_info_t *devi);
    176 static int dcdpower(dev_info_t *devi, int component, int level);
    177 
    178 static void *dcd_state;
    179 static int dcd_max_instance;
    180 static char *dcd_label = "dad";
    181 
    182 static char *diskokay = "disk okay\n";
    183 
    184 #if DEBUG || lint
    185 #define	DCDDEBUG
    186 #endif
    187 
    188 int dcd_test_flag = 0;
    189 /*
    190  * Debugging macros
    191  */
    192 #ifdef	DCDDEBUG
    193 static int dcddebug = 0;
    194 #define	DEBUGGING	(dcddebug > 1)
    195 #define	DAD_DEBUG	if (dcddebug == 1) dcd_log
    196 #define	DAD_DEBUG2	if (dcddebug > 1) dcd_log
    197 #else	/* DCDDEBUG */
    198 #define	dcddebug		(0)
    199 #define	DEBUGGING	(0)
    200 #define	DAD_DEBUG	if (0) dcd_log
    201 #define	DAD_DEBUG2	if (0) dcd_log
    202 #endif
    203 
    204 /*
    205  * we use pkt_private area for storing bp and retry_count
    206  * XXX: Really is this usefull.
    207  */
    208 struct dcd_pkt_private {
    209 	struct buf	*dcdpp_bp;
    210 	short		 dcdpp_retry_count;
    211 	short		 dcdpp_victim_retry_count;
    212 };
    213 
    214 
    215 _NOTE(SCHEME_PROTECTS_DATA("Unique per pkt", dcd_pkt_private buf))
    216 
    217 #define	PP_LEN	(sizeof (struct dcd_pkt_private))
    218 
    219 #define	PKT_SET_BP(pkt, bp)	\
    220 	((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_bp = bp
    221 #define	PKT_GET_BP(pkt) \
    222 	(((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_bp)
    223 
    224 
    225 #define	PKT_SET_RETRY_CNT(pkt, n) \
    226 	((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_retry_count = n
    227 
    228 #define	PKT_GET_RETRY_CNT(pkt) \
    229 	(((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_retry_count)
    230 
    231 #define	PKT_INCR_RETRY_CNT(pkt, n) \
    232 	((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_retry_count += n
    233 
    234 #define	PKT_SET_VICTIM_RETRY_CNT(pkt, n) \
    235 	((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_victim_retry_count \
    236 			= n
    237 
    238 #define	PKT_GET_VICTIM_RETRY_CNT(pkt) \
    239 	(((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_victim_retry_count)
    240 #define	PKT_INCR_VICTIM_RETRY_CNT(pkt, n) \
    241 	((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_victim_retry_count \
    242 			+= n
    243 
    244 #define	DISK_NOT_READY_RETRY_COUNT	(dcd_retry_count / 2)
    245 
    246 
    247 /*
    248  * Urk!
    249  */
    250 #define	SET_BP_ERROR(bp, err)	\
    251 	bioerror(bp, err);
    252 
    253 #define	IOSP			KSTAT_IO_PTR(un->un_stats)
    254 #define	IO_PARTITION_STATS	un->un_pstats[DCDPART(bp->b_edev)]
    255 #define	IOSP_PARTITION		KSTAT_IO_PTR(IO_PARTITION_STATS)
    256 
    257 #define	DCD_DO_KSTATS(un, kstat_function, bp) \
    258 	ASSERT(mutex_owned(DCD_MUTEX)); \
    259 	if (bp != un->un_sbufp) { \
    260 		if (un->un_stats) { \
    261 			kstat_function(IOSP); \
    262 		} \
    263 		if (IO_PARTITION_STATS) { \
    264 			kstat_function(IOSP_PARTITION); \
    265 		} \
    266 	}
    267 
    268 #define	DCD_DO_ERRSTATS(un, x) \
    269 	if (un->un_errstats) { \
    270 		struct dcd_errstats *dtp; \
    271 		dtp = (struct dcd_errstats *)un->un_errstats->ks_data; \
    272 		dtp->x.value.ui32++; \
    273 	}
    274 
    275 #define	GET_SOFT_STATE(dev)						\
    276 	struct dcd_disk *un;					\
    277 	int instance, part;					\
    278 	minor_t minor = getminor(dev);				\
    279 									\
    280 	part = minor & DCDPART_MASK;					\
    281 	instance = minor >> DCDUNIT_SHIFT;				\
    282 	if ((un = ddi_get_soft_state(dcd_state, instance)) == NULL)	\
    283 		return (ENXIO);
    284 
    285 #define	LOGICAL_BLOCK_ALIGN(blkno, blknoshift) \
    286 		(((blkno) & ((1 << (blknoshift)) - 1)) == 0)
    287 
    288 /*
    289  * After the following number of sectors, the cylinder number spills over
    290  * 0xFFFF if sectors = 63 and heads = 16.
    291  */
    292 #define	NUM_SECTORS_32G	0x3EFFC10
    293 
    294 /*
    295  * Configuration Data
    296  */
    297 
    298 /*
    299  * Device driver ops vector
    300  */
    301 
    302 static struct cb_ops dcd_cb_ops = {
    303 	dcdopen,		/* open */
    304 	dcdclose,		/* close */
    305 	dcdstrategy,		/* strategy */
    306 	nodev,			/* print */
    307 	dcddump,		/* dump */
    308 	dcdread,		/* read */
    309 	dcdwrite,		/* write */
    310 	dcdioctl,		/* ioctl */
    311 	nodev,			/* devmap */
    312 	nodev,			/* mmap */
    313 	nodev,			/* segmap */
    314 	nochpoll,		/* poll */
    315 	dcd_prop_op,		/* cb_prop_op */
    316 	0,			/* streamtab  */
    317 	D_64BIT | D_MP | D_NEW,	/* Driver compatibility flag */
    318 	CB_REV,			/* cb_rev */
    319 	dcdaread, 		/* async I/O read entry point */
    320 	dcdawrite		/* async I/O write entry point */
    321 };
    322 
    323 static struct dev_ops dcd_ops = {
    324 	DEVO_REV,		/* devo_rev, */
    325 	0,			/* refcnt  */
    326 	dcdinfo,		/* info */
    327 	nulldev,		/* identify */
    328 	dcdprobe,		/* probe */
    329 	dcdattach,		/* attach */
    330 	dcddetach,		/* detach */
    331 	dcdreset,		/* reset */
    332 	&dcd_cb_ops,		/* driver operations */
    333 	(struct bus_ops *)0,	/* bus operations */
    334 	dcdpower,		/* power */
    335 	ddi_quiesce_not_supported,	/* devo_quiesce */
    336 };
    337 
    338 
    339 /*
    340  * This is the loadable module wrapper.
    341  */
    342 #include <sys/modctl.h>
    343 
    344 static struct modldrv modldrv = {
    345 	&mod_driverops,		/* Type of module. This one is a driver */
    346 	"DAD Disk Driver",	/* Name of the module. */
    347 	&dcd_ops,	/* driver ops */
    348 };
    349 
    350 
    351 
    352 static struct modlinkage modlinkage = {
    353 	MODREV_1, &modldrv, NULL
    354 };
    355 
    356 /*
    357  * the dcd_attach_mutex only protects dcd_max_instance in multi-threaded
    358  * attach situations
    359  */
    360 static kmutex_t dcd_attach_mutex;
    361 
    362 int
    363 _init(void)
    364 {
    365 	int e;
    366 
    367 	if ((e = ddi_soft_state_init(&dcd_state, sizeof (struct dcd_disk),
    368 	    DCD_MAXUNIT)) != 0)
    369 		return (e);
    370 
    371 	mutex_init(&dcd_attach_mutex, NULL, MUTEX_DRIVER, NULL);
    372 	e = mod_install(&modlinkage);
    373 	if (e != 0) {
    374 		mutex_destroy(&dcd_attach_mutex);
    375 		ddi_soft_state_fini(&dcd_state);
    376 		return (e);
    377 	}
    378 
    379 	return (e);
    380 }
    381 
    382 int
    383 _fini(void)
    384 {
    385 	int e;
    386 
    387 	if ((e = mod_remove(&modlinkage)) != 0)
    388 		return (e);
    389 
    390 	ddi_soft_state_fini(&dcd_state);
    391 	mutex_destroy(&dcd_attach_mutex);
    392 
    393 	return (e);
    394 }
    395 
    396 int
    397 _info(struct modinfo *modinfop)
    398 {
    399 
    400 	return (mod_info(&modlinkage, modinfop));
    401 }
    402 
    403 static int
    404 dcdprobe(dev_info_t *devi)
    405 {
    406 	struct dcd_device *devp;
    407 	int rval = DDI_PROBE_PARTIAL;
    408 	int instance;
    409 
    410 	devp = ddi_get_driver_private(devi);
    411 	instance = ddi_get_instance(devi);
    412 
    413 	/*
    414 	 * Keep a count of how many disks (ie. highest instance no) we have
    415 	 * XXX currently not used but maybe useful later again
    416 	 */
    417 	mutex_enter(&dcd_attach_mutex);
    418 	if (instance > dcd_max_instance)
    419 		dcd_max_instance = instance;
    420 	mutex_exit(&dcd_attach_mutex);
    421 
    422 	DAD_DEBUG2(devp->dcd_dev, dcd_label, DCD_DEBUG, "dcdprobe:\n");
    423 
    424 	if (ddi_get_soft_state(dcd_state, instance) != NULL)
    425 		return (DDI_PROBE_PARTIAL);
    426 
    427 	/*
    428 	 * Turn around and call utility probe routine
    429 	 * to see whether we actually have a disk at
    430 	 */
    431 
    432 	DAD_DEBUG2(devp->dcd_dev, dcd_label, DCD_DEBUG,
    433 	    "dcdprobe: %x\n", dcd_probe(devp, NULL_FUNC));
    434 
    435 	switch (dcd_probe(devp, NULL_FUNC)) {
    436 	default:
    437 	case DCDPROBE_NORESP:
    438 	case DCDPROBE_NONCCS:
    439 	case DCDPROBE_NOMEM:
    440 	case DCDPROBE_FAILURE:
    441 	case DCDPROBE_BUSY:
    442 		break;
    443 
    444 	case DCDPROBE_EXISTS:
    445 		/*
    446 		 * Check whether it is a ATA device and then
    447 		 * return  SUCCESS.
    448 		 */
    449 		DAD_DEBUG2(devp->dcd_dev, dcd_label, DCD_DEBUG,
    450 		    "config %x\n", devp->dcd_ident->dcd_config);
    451 		if ((devp->dcd_ident->dcd_config & ATAPI_DEVICE) == 0) {
    452 			if (devp->dcd_ident->dcd_config & ATANON_REMOVABLE) {
    453 				rval = DDI_PROBE_SUCCESS;
    454 			} else
    455 				rval = DDI_PROBE_FAILURE;
    456 		} else {
    457 			rval = DDI_PROBE_FAILURE;
    458 		}
    459 		break;
    460 	}
    461 	dcd_unprobe(devp);
    462 
    463 	DAD_DEBUG2(devp->dcd_dev, dcd_label, DCD_DEBUG,
    464 	    "dcdprobe returns %x\n", rval);
    465 
    466 	return (rval);
    467 }
    468 
    469 
    470 /*ARGSUSED*/
    471 static int
    472 dcdattach(dev_info_t *devi, ddi_attach_cmd_t cmd)
    473 {
    474 	int instance, rval;
    475 	struct dcd_device *devp;
    476 	struct dcd_disk *un;
    477 	struct diskhd *dp;
    478 	char	*pm_comp[] =
    479 	    { "NAME=ide-disk", "0=standby", "1=idle", "2=active" };
    480 
    481 	/* CONSTCOND */
    482 	ASSERT(NO_COMPETING_THREADS);
    483 
    484 
    485 	devp = ddi_get_driver_private(devi);
    486 	instance = ddi_get_instance(devi);
    487 	DAD_DEBUG2(devp->dcd_dev, dcd_label, DCD_DEBUG, "Attach Started\n");
    488 
    489 	switch (cmd) {
    490 	case DDI_ATTACH:
    491 		break;
    492 
    493 	case DDI_RESUME:
    494 		if (!(un = ddi_get_soft_state(dcd_state, instance)))
    495 			return (DDI_FAILURE);
    496 		mutex_enter(DCD_MUTEX);
    497 		Restore_state(un);
    498 		/*
    499 		 * Restore the state which was saved to give the
    500 		 * the right state in un_last_state
    501 		 */
    502 		un->un_last_state = un->un_save_state;
    503 		un->un_throttle = 2;
    504 		cv_broadcast(&un->un_suspend_cv);
    505 		/*
    506 		 * Raise the power level of the device to active.
    507 		 */
    508 		mutex_exit(DCD_MUTEX);
    509 		(void) pm_raise_power(DCD_DEVINFO, 0, DCD_DEVICE_ACTIVE);
    510 		mutex_enter(DCD_MUTEX);
    511 
    512 		/*
    513 		 * start unit - if this is a low-activity device
    514 		 * commands in queue will have to wait until new
    515 		 * commands come in, which may take awhile.
    516 		 * Also, we specifically don't check un_ncmds
    517 		 * because we know that there really are no
    518 		 * commands in progress after the unit was suspended
    519 		 * and we could have reached the throttle level, been
    520 		 * suspended, and have no new commands coming in for
    521 		 * awhile.  Highly unlikely, but so is the low-
    522 		 * activity disk scenario.
    523 		 */
    524 		dp = &un->un_utab;
    525 		if (dp->b_actf && (dp->b_forw == NULL)) {
    526 			dcdstart(un);
    527 		}
    528 
    529 		mutex_exit(DCD_MUTEX);
    530 		return (DDI_SUCCESS);
    531 
    532 	default:
    533 		return (DDI_FAILURE);
    534 	}
    535 
    536 	if (dcd_doattach(devi, SLEEP_FUNC) == DDI_FAILURE) {
    537 		return (DDI_FAILURE);
    538 	}
    539 
    540 	if (!(un = (struct dcd_disk *)
    541 	    ddi_get_soft_state(dcd_state, instance))) {
    542 		return (DDI_FAILURE);
    543 	}
    544 	devp->dcd_private = (ataopaque_t)un;
    545 
    546 	/*
    547 	 * Add a zero-length attribute to tell the world we support
    548 	 * kernel ioctls (for layered drivers)
    549 	 */
    550 	(void) ddi_prop_create(DDI_DEV_T_NONE, devi, DDI_PROP_CANSLEEP,
    551 	    DDI_KERNEL_IOCTL, NULL, 0);
    552 
    553 	/*
    554 	 * Since the dad device does not have the 'reg' property,
    555 	 * cpr will not call its DDI_SUSPEND/DDI_RESUME entries.
    556 	 * The following code is to tell cpr that this device
    557 	 * does need to be suspended and resumed.
    558 	 */
    559 	(void) ddi_prop_update_string(DDI_DEV_T_NONE, devi,
    560 	    "pm-hardware-state", (caddr_t)"needs-suspend-resume");
    561 
    562 	/*
    563 	 * Initialize power management bookkeeping;
    564 	 * Create components - In IDE case there are 3 levels and one
    565 	 * component. The levels being - active, idle, standby.
    566 	 */
    567 
    568 	rval = ddi_prop_update_string_array(DDI_DEV_T_NONE,
    569 	    devi, "pm-components", pm_comp, 4);
    570 	if (rval == DDI_PROP_SUCCESS) {
    571 		/*
    572 		 * Ignore the return value of pm_raise_power
    573 		 * Even if we check the return values and
    574 		 * remove the property created above, PM
    575 		 * framework will not honour the change after
    576 		 * first call to pm_raise_power. Hence, the
    577 		 * removal of that property does not help if
    578 		 * pm_raise_power fails.
    579 		 */
    580 		(void) pm_raise_power(DCD_DEVINFO, 0, DCD_DEVICE_ACTIVE);
    581 	}
    582 
    583 	ddi_report_dev(devi);
    584 
    585 	cmlb_alloc_handle(&un->un_dklbhandle);
    586 
    587 	if (cmlb_attach(devi,
    588 	    &dcd_lb_ops,
    589 	    0,
    590 	    B_FALSE,
    591 	    B_FALSE,
    592 	    DDI_NT_BLOCK_CHAN,
    593 	    CMLB_FAKE_GEOM_LABEL_IOCTLS_VTOC8,
    594 	    un->un_dklbhandle,
    595 	    0) != 0) {
    596 		cmlb_free_handle(&un->un_dklbhandle);
    597 		dcd_free_softstate(un, devi);
    598 		return (DDI_FAILURE);
    599 	}
    600 
    601 	mutex_enter(DCD_MUTEX);
    602 	(void) dcd_validate_geometry(un);
    603 
    604 	/* Get devid; create a devid ONLY IF could not get ID */
    605 	if (dcd_get_devid(un) == NULL) {
    606 		/* Create the fab'd devid */
    607 		(void) dcd_create_devid(un);
    608 	}
    609 	mutex_exit(DCD_MUTEX);
    610 
    611 	return (DDI_SUCCESS);
    612 }
    613 
    614 static void
    615 dcd_free_softstate(struct dcd_disk *un, dev_info_t *devi)
    616 {
    617 	struct dcd_device		*devp;
    618 	int instance = ddi_get_instance(devi);
    619 
    620 	devp = ddi_get_driver_private(devi);
    621 
    622 	if (un) {
    623 		sema_destroy(&un->un_semoclose);
    624 		cv_destroy(&un->un_sbuf_cv);
    625 		cv_destroy(&un->un_state_cv);
    626 		cv_destroy(&un->un_disk_busy_cv);
    627 		cv_destroy(&un->un_suspend_cv);
    628 
    629 		/*
    630 		 * Deallocate command packet resources.
    631 		 */
    632 		if (un->un_sbufp)
    633 			freerbuf(un->un_sbufp);
    634 		if (un->un_dp) {
    635 			kmem_free((caddr_t)un->un_dp, sizeof (*un->un_dp));
    636 		}
    637 		/*
    638 		 * Unregister the devid and free devid resources allocated
    639 		 */
    640 		ddi_devid_unregister(DCD_DEVINFO);
    641 		if (un->un_devid) {
    642 			ddi_devid_free(un->un_devid);
    643 			un->un_devid = NULL;
    644 		}
    645 
    646 		/*
    647 		 * Delete kstats. Kstats for non CD devices are deleted
    648 		 * in dcdclose.
    649 		 */
    650 		if (un->un_stats) {
    651 			kstat_delete(un->un_stats);
    652 		}
    653 
    654 	}
    655 
    656 	/*
    657 	 * Cleanup scsi_device resources.
    658 	 */
    659 	ddi_soft_state_free(dcd_state, instance);
    660 	devp->dcd_private = (ataopaque_t)0;
    661 	/* unprobe scsi device */
    662 	dcd_unprobe(devp);
    663 
    664 	/* Remove properties created during attach */
    665 	ddi_prop_remove_all(devi);
    666 }
    667 
    668 static int
    669 dcddetach(dev_info_t *devi, ddi_detach_cmd_t cmd)
    670 {
    671 	int instance;
    672 	struct dcd_disk *un;
    673 	clock_t	wait_cmds_complete;
    674 	instance = ddi_get_instance(devi);
    675 
    676 	if (!(un = ddi_get_soft_state(dcd_state, instance)))
    677 		return (DDI_FAILURE);
    678 
    679 	switch (cmd) {
    680 	case DDI_DETACH:
    681 		return (dcd_dr_detach(devi));
    682 
    683 	case DDI_SUSPEND:
    684 		mutex_enter(DCD_MUTEX);
    685 		if (un->un_state == DCD_STATE_SUSPENDED) {
    686 			mutex_exit(DCD_MUTEX);
    687 			return (DDI_SUCCESS);
    688 		}
    689 		un->un_throttle = 0;
    690 		/*
    691 		 * Save the last state first
    692 		 */
    693 		un->un_save_state = un->un_last_state;
    694 
    695 		New_state(un, DCD_STATE_SUSPENDED);
    696 
    697 		/*
    698 		 * wait till current operation completed. If we are
    699 		 * in the resource wait state (with an intr outstanding)
    700 		 * then we need to wait till the intr completes and
    701 		 * starts the next cmd. We wait for
    702 		 * DCD_WAIT_CMDS_COMPLETE seconds before failing the
    703 		 * DDI_SUSPEND.
    704 		 */
    705 		wait_cmds_complete = ddi_get_lbolt();
    706 		wait_cmds_complete +=
    707 		    DCD_WAIT_CMDS_COMPLETE * drv_usectohz(1000000);
    708 
    709 		while (un->un_ncmds) {
    710 			if (cv_timedwait(&un->un_disk_busy_cv,
    711 			    DCD_MUTEX, wait_cmds_complete) == -1) {
    712 				/*
    713 				 * commands Didn't finish in the
    714 				 * specified time, fail the DDI_SUSPEND.
    715 				 */
    716 				DAD_DEBUG2(DCD_DEVINFO, dcd_label,
    717 				    DCD_DEBUG, "dcddetach: SUSPEND "
    718 				    "failed due to outstanding cmds\n");
    719 				Restore_state(un);
    720 				mutex_exit(DCD_MUTEX);
    721 				return (DDI_FAILURE);
    722 			}
    723 		}
    724 		mutex_exit(DCD_MUTEX);
    725 		return (DDI_SUCCESS);
    726 	}
    727 	return (DDI_FAILURE);
    728 }
    729 
    730 /*
    731  * The reset entry point gets invoked at the system shutdown time or through
    732  * CPR code at system suspend.
    733  * Will be flushing the cache and expect this to be last I/O operation to the
    734  * disk before system reset/power off.
    735  */
    736 /*ARGSUSED*/
    737 static int
    738 dcdreset(dev_info_t *dip, ddi_reset_cmd_t cmd)
    739 {
    740 	struct dcd_disk *un;
    741 	int instance;
    742 
    743 	instance = ddi_get_instance(dip);
    744 
    745 	if (!(un = ddi_get_soft_state(dcd_state, instance)))
    746 		return (DDI_FAILURE);
    747 
    748 	dcd_flush_cache(un);
    749 
    750 	return (DDI_SUCCESS);
    751 }
    752 
    753 
    754 static int
    755 dcd_dr_detach(dev_info_t *devi)
    756 {
    757 	struct dcd_device	*devp;
    758 	struct dcd_disk		*un;
    759 
    760 	/*
    761 	 * Get scsi_device structure for this instance.
    762 	 */
    763 	if ((devp = ddi_get_driver_private(devi)) == NULL)
    764 		return (DDI_FAILURE);
    765 
    766 	/*
    767 	 * Get dcd_disk structure containing target 'private' information
    768 	 */
    769 	un = (struct dcd_disk *)devp->dcd_private;
    770 
    771 	/*
    772 	 * Verify there are NO outstanding commands issued to this device.
    773 	 * ie, un_ncmds == 0.
    774 	 * It's possible to have outstanding commands through the physio
    775 	 * code path, even though everything's closed.
    776 	 */
    777 #ifndef lint
    778 	_NOTE(COMPETING_THREADS_NOW);
    779 #endif
    780 	mutex_enter(DCD_MUTEX);
    781 	if (un->un_ncmds) {
    782 		mutex_exit(DCD_MUTEX);
    783 		_NOTE(NO_COMPETING_THREADS_NOW);
    784 		return (DDI_FAILURE);
    785 	}
    786 
    787 	mutex_exit(DCD_MUTEX);
    788 
    789 	cmlb_detach(un->un_dklbhandle, 0);
    790 	cmlb_free_handle(&un->un_dklbhandle);
    791 
    792 
    793 	/*
    794 	 * Lower the power state of the device
    795 	 * i.e. the minimum power consumption state - sleep.
    796 	 */
    797 	(void) pm_lower_power(DCD_DEVINFO, 0, DCD_DEVICE_STANDBY);
    798 
    799 	_NOTE(NO_COMPETING_THREADS_NOW);
    800 
    801 	/*
    802 	 * at this point there are no competing threads anymore
    803 	 * release active MT locks and all device resources.
    804 	 */
    805 	dcd_free_softstate(un, devi);
    806 
    807 	return (DDI_SUCCESS);
    808 }
    809 
    810 static int
    811 dcdpower(dev_info_t *devi, int component, int level)
    812 {
    813 	struct dcd_pkt *pkt;
    814 	struct dcd_disk *un;
    815 	int	instance;
    816 	uchar_t	cmd;
    817 
    818 
    819 	instance = ddi_get_instance(devi);
    820 
    821 	if (!(un = ddi_get_soft_state(dcd_state, instance)) ||
    822 	    (DCD_DEVICE_STANDBY > level) || (level > DCD_DEVICE_ACTIVE) ||
    823 	    component != 0) {
    824 		return (DDI_FAILURE);
    825 	}
    826 
    827 	mutex_enter(DCD_MUTEX);
    828 	/*
    829 	 * if there are active commands for the device or device will be
    830 	 * active soon. At the same time there is request to lower power
    831 	 * return failure.
    832 	 */
    833 	if ((un->un_ncmds) && (level != DCD_DEVICE_ACTIVE)) {
    834 		mutex_exit(DCD_MUTEX);
    835 		return (DDI_FAILURE);
    836 	}
    837 
    838 	if ((un->un_state == DCD_STATE_OFFLINE) ||
    839 	    (un->un_state == DCD_STATE_FATAL)) {
    840 		mutex_exit(DCD_MUTEX);
    841 		return (DDI_FAILURE);
    842 	}
    843 
    844 	if (level == DCD_DEVICE_ACTIVE) {
    845 		/*
    846 		 * No need to fire any command, just set the state structure
    847 		 * to indicate previous state and set the level to active
    848 		 */
    849 		un->un_power_level = DCD_DEVICE_ACTIVE;
    850 		if (un->un_state == DCD_STATE_PM_SUSPENDED)
    851 			Restore_state(un);
    852 		mutex_exit(DCD_MUTEX);
    853 	} else {
    854 		pkt = dcd_init_pkt(ROUTE, (struct dcd_pkt *)NULL,
    855 		    NULL, (uint32_t)sizeof (struct dcd_cmd), 2, PP_LEN,
    856 		    PKT_CONSISTENT, NULL_FUNC, NULL);
    857 
    858 		if (pkt == (struct dcd_pkt *)NULL) {
    859 			mutex_exit(DCD_MUTEX);
    860 			return (DDI_FAILURE);
    861 		}
    862 
    863 		switch (level) {
    864 		case DCD_DEVICE_IDLE:
    865 			cmd = ATA_IDLE_IMMEDIATE;
    866 			break;
    867 
    868 		case DCD_DEVICE_STANDBY:
    869 			cmd = ATA_STANDBY_IMMEDIATE;
    870 			break;
    871 		}
    872 
    873 		makecommand(pkt, 0, cmd, 0, 0, 0, NO_DATA_XFER, 0);
    874 		mutex_exit(DCD_MUTEX);
    875 		/*
    876 		 * Issue the appropriate command
    877 		 */
    878 		if ((dcd_poll(pkt)) || (SCBP_C(pkt) != STATUS_GOOD)) {
    879 			dcd_destroy_pkt(pkt);
    880 			return (DDI_FAILURE);
    881 		}
    882 		dcd_destroy_pkt(pkt);
    883 		mutex_enter(DCD_MUTEX);
    884 		if (un->un_state != DCD_STATE_PM_SUSPENDED)
    885 			New_state(un, DCD_STATE_PM_SUSPENDED);
    886 		un->un_power_level = level;
    887 		mutex_exit(DCD_MUTEX);
    888 	}
    889 
    890 	return (DDI_SUCCESS);
    891 }
    892 
    893 static int
    894 dcd_doattach(dev_info_t *devi, int (*canwait)())
    895 {
    896 	struct dcd_device *devp;
    897 	struct dcd_disk *un = (struct dcd_disk *)0;
    898 	int instance;
    899 	int km_flags = (canwait != NULL_FUNC)? KM_SLEEP : KM_NOSLEEP;
    900 	int rval;
    901 	char *prop_template = "target%x-dcd-options";
    902 	int options;
    903 	char    prop_str[32];
    904 	int target;
    905 	diskaddr_t capacity;
    906 
    907 	devp = ddi_get_driver_private(devi);
    908 
    909 	/*
    910 	 * Call the routine scsi_probe to do some of the dirty work.
    911 	 * If the INQUIRY command succeeds, the field dcd_inq in the
    912 	 * device structure will be filled in. The dcd_sense structure
    913 	 * will also be allocated.
    914 	 */
    915 
    916 	switch (dcd_probe(devp, canwait)) {
    917 	default:
    918 		return (DDI_FAILURE);
    919 
    920 	case DCDPROBE_EXISTS:
    921 		if ((devp->dcd_ident->dcd_config & ATAPI_DEVICE) == 0) {
    922 			if (devp->dcd_ident->dcd_config & ATANON_REMOVABLE) {
    923 				rval = DDI_SUCCESS;
    924 			} else {
    925 				rval = DDI_FAILURE;
    926 				goto error;
    927 			}
    928 		} else {
    929 			rval = DDI_FAILURE;
    930 			goto error;
    931 		}
    932 	}
    933 
    934 
    935 	instance = ddi_get_instance(devp->dcd_dev);
    936 
    937 	if (ddi_soft_state_zalloc(dcd_state, instance) != DDI_SUCCESS) {
    938 		rval = DDI_FAILURE;
    939 		goto error;
    940 	}
    941 
    942 	un = ddi_get_soft_state(dcd_state, instance);
    943 
    944 	un->un_sbufp = getrbuf(km_flags);
    945 	if (un->un_sbufp == (struct buf *)NULL) {
    946 		rval = DDI_FAILURE;
    947 		goto error;
    948 	}
    949 
    950 
    951 	un->un_dcd = devp;
    952 	un->un_power_level = -1;
    953 	un->un_tgattribute.media_is_writable = 1;
    954 
    955 	sema_init(&un->un_semoclose, 1, NULL, SEMA_DRIVER, NULL);
    956 	cv_init(&un->un_sbuf_cv, NULL, CV_DRIVER, NULL);
    957 	cv_init(&un->un_state_cv, NULL, CV_DRIVER, NULL);
    958 	/* Initialize power management conditional variable */
    959 	cv_init(&un->un_disk_busy_cv, NULL, CV_DRIVER, NULL);
    960 	cv_init(&un->un_suspend_cv, NULL, CV_DRIVER, NULL);
    961 
    962 	if (un->un_dp == 0) {
    963 		/*
    964 		 * Assume CCS drive, assume parity, but call
    965 		 * it a CDROM if it is a RODIRECT device.
    966 		 */
    967 		un->un_dp = (struct dcd_drivetype *)
    968 		    kmem_zalloc(sizeof (struct dcd_drivetype), km_flags);
    969 		if (!un->un_dp) {
    970 			rval = DDI_FAILURE;
    971 			goto error;
    972 		}
    973 		if ((devp->dcd_ident->dcd_config & ATAPI_DEVICE) == 0) {
    974 			if (devp->dcd_ident->dcd_config & ATANON_REMOVABLE) {
    975 				un->un_dp->ctype = CTYPE_DISK;
    976 			}
    977 		} else  {
    978 			rval = DDI_FAILURE;
    979 			goto error;
    980 		}
    981 		un->un_dp->name = "CCS";
    982 		un->un_dp->options = 0;
    983 	}
    984 
    985 	/*
    986 	 * Allow I/O requests at un_secsize offset in multiple of un_secsize.
    987 	 */
    988 	un->un_secsize = DEV_BSIZE;
    989 
    990 	/*
    991 	 * If the device is not a removable media device, make sure that
    992 	 * that the device is ready, by issuing the another identify but
    993 	 * not needed. Get the capacity from identify data and store here.
    994 	 */
    995 	if (dcd_compute_dk_capacity(devp, &capacity) == 0) {
    996 		un->un_diskcapacity = capacity;
    997 		un->un_lbasize = DEV_BSIZE;
    998 	}
    999 
   1000 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "Geometry Data\n");
   1001 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "cyls %x, heads %x",
   1002 	    devp->dcd_ident->dcd_fixcyls,
   1003 	    devp->dcd_ident->dcd_heads);
   1004 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "sectors %x,",
   1005 	    devp->dcd_ident->dcd_sectors);
   1006 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "capacity %llx\n",
   1007 	    capacity);
   1008 
   1009 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1010 	    "dcdprobe: drive selected\n");
   1011 
   1012 	/*
   1013 	 * Check for the property target<n>-dcd-options to find the option
   1014 	 * set by the HBA driver for this target so that we can set the
   1015 	 * Unit structure variable so that we can send commands accordingly.
   1016 	 */
   1017 	target = devp->dcd_address->da_target;
   1018 	(void) sprintf(prop_str, prop_template, target);
   1019 	options = ddi_prop_get_int(DDI_DEV_T_ANY, devi, DDI_PROP_NOTPROM,
   1020 	    prop_str, -1);
   1021 	if (options < 0) {
   1022 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1023 		    "No per target properties");
   1024 	} else {
   1025 		if ((options & DCD_DMA_MODE) == DCD_DMA_MODE) {
   1026 			un->un_dp->options |= DMA_SUPPORTTED;
   1027 			un->un_dp->dma_mode = (options >> 3) & 0x03;
   1028 			DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1029 			    "mode %x\n", un->un_dp->dma_mode);
   1030 		} else {
   1031 			un->un_dp->options &= ~DMA_SUPPORTTED;
   1032 			un->un_dp->pio_mode = options & 0x7;
   1033 			if (options & DCD_BLOCK_MODE)
   1034 				un->un_dp->options |= BLOCK_MODE;
   1035 			DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1036 			    "mode %x\n", un->un_dp->pio_mode);
   1037 		}
   1038 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1039 		    "options %x,", un->un_dp->options);
   1040 	}
   1041 
   1042 	un->un_throttle = 2;
   1043 	/*
   1044 	 * set default max_xfer_size - This should depend on whether the
   1045 	 * Block mode is supported by the device or not.
   1046 	 */
   1047 	un->un_max_xfer_size = MAX_ATA_XFER_SIZE;
   1048 
   1049 	/*
   1050 	 * Set write cache enable softstate
   1051 	 *
   1052 	 * WCE is only supported in ATAPI-4 or higher; for
   1053 	 * lower rev devices, must assume write cache is
   1054 	 * enabled.
   1055 	 */
   1056 	mutex_enter(DCD_MUTEX);
   1057 	un->un_write_cache_enabled = (devp->dcd_ident->dcd_majvers == 0xffff) ||
   1058 	    ((devp->dcd_ident->dcd_majvers & IDENTIFY_80_ATAPI_4) == 0) ||
   1059 	    (devp->dcd_ident->dcd_features85 & IDENTIFY_85_WCE) != 0;
   1060 	mutex_exit(DCD_MUTEX);
   1061 
   1062 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1063 	    "dcd_doattach returns good\n");
   1064 
   1065 	return (rval);
   1066 
   1067 error:
   1068 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "dcd_doattach failed\n");
   1069 	dcd_free_softstate(un, devi);
   1070 	return (rval);
   1071 }
   1072 
   1073 #ifdef NOTNEEDED
   1074 /*
   1075  * This routine is used to set the block mode of operation by issuing the
   1076  * Set Block mode ata command with the maximum block mode possible
   1077  */
   1078 dcd_set_multiple(struct dcd_disk *un)
   1079 {
   1080 	int status;
   1081 	struct udcd_cmd ucmd;
   1082 	struct dcd_cmd cdb;
   1083 	dev_t	dev;
   1084 
   1085 
   1086 	/* Zero all the required structure */
   1087 	(void) bzero((caddr_t)&ucmd, sizeof (ucmd));
   1088 
   1089 	(void) bzero((caddr_t)&cdb, sizeof (struct dcd_cmd));
   1090 
   1091 	cdb.cmd = ATA_SET_MULTIPLE;
   1092 	/*
   1093 	 * Here we should pass what needs to go into sector count REGISTER.
   1094 	 * Eventhough this field indicates the number of bytes to read we
   1095 	 * need to specify the block factor in terms of bytes so that it
   1096 	 * will be programmed by the HBA driver into the sector count register.
   1097 	 */
   1098 	cdb.size = un->un_lbasize * un->un_dp->block_factor;
   1099 
   1100 	cdb.sector_num.lba_num = 0;
   1101 	cdb.address_mode = ADD_LBA_MODE;
   1102 	cdb.direction = NO_DATA_XFER;
   1103 
   1104 	ucmd.udcd_flags = 0;
   1105 	ucmd.udcd_cmd = &cdb;
   1106 	ucmd.udcd_bufaddr = NULL;
   1107 	ucmd.udcd_buflen = 0;
   1108 	ucmd.udcd_flags |= UDCD_SILENT;
   1109 
   1110 	dev = makedevice(ddi_driver_major(DCD_DEVINFO),
   1111 	    ddi_get_instance(DCD_DEVINFO) << DCDUNIT_SHIFT);
   1112 
   1113 
   1114 	status = dcdioctl_cmd(dev, &ucmd, UIO_SYSSPACE, UIO_SYSSPACE);
   1115 
   1116 	return (status);
   1117 }
   1118 /*
   1119  * The following routine is used only for setting the transfer mode
   1120  * and it is not designed for transferring any other features subcommand.
   1121  */
   1122 dcd_set_features(struct dcd_disk *un, uchar_t mode)
   1123 {
   1124 	int status;
   1125 	struct udcd_cmd ucmd;
   1126 	struct dcd_cmd cdb;
   1127 	dev_t	dev;
   1128 
   1129 
   1130 	/* Zero all the required structure */
   1131 	(void) bzero((caddr_t)&ucmd, sizeof (ucmd));
   1132 
   1133 	(void) bzero((caddr_t)&cdb, sizeof (struct dcd_cmd));
   1134 
   1135 	cdb.cmd = ATA_SET_FEATURES;
   1136 	/*
   1137 	 * Here we need to pass what needs to go into the sector count register
   1138 	 * But in the case of SET FEATURES command the value taken in the
   1139 	 * sector count register depends what type of subcommand is
   1140 	 * passed in the features register. Since we have defined the size to
   1141 	 * be the size in bytes in this context it does not indicate bytes
   1142 	 * instead it indicates the mode to be programmed.
   1143 	 */
   1144 	cdb.size = un->un_lbasize * mode;
   1145 
   1146 	cdb.sector_num.lba_num = 0;
   1147 	cdb.address_mode = ADD_LBA_MODE;
   1148 	cdb.direction = NO_DATA_XFER;
   1149 	cdb.features = ATA_FEATURE_SET_MODE;
   1150 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1151 	    "size %x, features %x, cmd %x\n",
   1152 	    cdb.size, cdb.features, cdb.cmd);
   1153 
   1154 	ucmd.udcd_flags = 0;
   1155 	ucmd.udcd_cmd = &cdb;
   1156 	ucmd.udcd_bufaddr = NULL;
   1157 	ucmd.udcd_buflen = 0;
   1158 	ucmd.udcd_flags |= UDCD_SILENT;
   1159 
   1160 	dev = makedevice(ddi_driver_major(DCD_DEVINFO),
   1161 	    ddi_get_instance(DCD_DEVINFO) << DCDUNIT_SHIFT);
   1162 
   1163 	status = dcdioctl_cmd(dev, &ucmd, UIO_SYSSPACE, UIO_SYSSPACE);
   1164 
   1165 	return (status);
   1166 }
   1167 #endif
   1168 
   1169 /*
   1170  * Validate the geometry for this disk, e.g.,
   1171  * see whether it has a valid label.
   1172  */
   1173 static int
   1174 dcd_validate_geometry(struct dcd_disk *un)
   1175 {
   1176 	int secsize = 0;
   1177 	struct  dcd_device *devp;
   1178 	int secdiv;
   1179 	int rval;
   1180 
   1181 	ASSERT(mutex_owned(DCD_MUTEX));
   1182 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1183 	    "dcd_validate_geometry: started \n");
   1184 
   1185 	if (un->un_lbasize < 0) {
   1186 		return (DCD_BAD_LABEL);
   1187 	}
   1188 
   1189 	if (un->un_state == DCD_STATE_PM_SUSPENDED) {
   1190 		mutex_exit(DCD_MUTEX);
   1191 		if (pm_raise_power(DCD_DEVINFO, 0, DCD_DEVICE_ACTIVE) !=
   1192 		    DDI_SUCCESS) {
   1193 			mutex_enter(DCD_MUTEX);
   1194 			return (DCD_BAD_LABEL);
   1195 		}
   1196 		mutex_enter(DCD_MUTEX);
   1197 	}
   1198 
   1199 	secsize = un->un_secsize;
   1200 
   1201 	/*
   1202 	 * take a log base 2 of sector size (sorry)
   1203 	 */
   1204 	for (secdiv = 0; secsize = secsize >> 1; secdiv++)
   1205 		;
   1206 	un->un_secdiv = secdiv;
   1207 
   1208 	/*
   1209 	 * Only DIRECT ACCESS devices will have Sun labels.
   1210 	 * CD's supposedly have a Sun label, too
   1211 	 */
   1212 
   1213 	devp = un->un_dcd;
   1214 
   1215 	if (((devp->dcd_ident->dcd_config & ATAPI_DEVICE) == 0) &&
   1216 	    (devp->dcd_ident->dcd_config & ATANON_REMOVABLE)) {
   1217 		mutex_exit(DCD_MUTEX);
   1218 		rval = cmlb_validate(un->un_dklbhandle, 0, 0);
   1219 		mutex_enter(DCD_MUTEX);
   1220 		if (rval == ENOMEM)
   1221 			return (DCD_NO_MEM_FOR_LABEL);
   1222 		else if (rval != 0)
   1223 			return (DCD_BAD_LABEL);
   1224 	} else {
   1225 		/* it should never get here. */
   1226 		return (DCD_BAD_LABEL);
   1227 	}
   1228 
   1229 	/*
   1230 	 * take a log base 2 of logical block size
   1231 	 */
   1232 	secsize = un->un_lbasize;
   1233 	for (secdiv = 0; secsize = secsize >> 1; secdiv++)
   1234 		;
   1235 	un->un_lbadiv = secdiv;
   1236 
   1237 	/*
   1238 	 * take a log base 2 of the multiple of DEV_BSIZE blocks that
   1239 	 * make up one logical block
   1240 	 */
   1241 	secsize = un->un_lbasize >> DEV_BSHIFT;
   1242 	for (secdiv = 0; secsize = secsize >> 1; secdiv++)
   1243 		;
   1244 	un->un_blknoshift = secdiv;
   1245 	return (0);
   1246 }
   1247 
   1248 /*
   1249  * Unix Entry Points
   1250  */
   1251 
   1252 /* ARGSUSED3 */
   1253 static int
   1254 dcdopen(dev_t *dev_p, int flag, int otyp, cred_t *cred_p)
   1255 {
   1256 	dev_t dev = *dev_p;
   1257 	int rval = EIO;
   1258 	int partmask;
   1259 	int nodelay = (flag & (FNDELAY | FNONBLOCK));
   1260 	int i;
   1261 	char kstatname[KSTAT_STRLEN];
   1262 	diskaddr_t lblocks;
   1263 	char *partname;
   1264 
   1265 	GET_SOFT_STATE(dev);
   1266 
   1267 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1268 	    "Inside Open flag %x, otyp %x\n", flag, otyp);
   1269 
   1270 	if (otyp >= OTYPCNT) {
   1271 		return (EINVAL);
   1272 	}
   1273 
   1274 	partmask = 1 << part;
   1275 
   1276 	/*
   1277 	 * We use a semaphore here in order to serialize
   1278 	 * open and close requests on the device.
   1279 	 */
   1280 	sema_p(&un->un_semoclose);
   1281 
   1282 	mutex_enter(DCD_MUTEX);
   1283 
   1284 	if ((un->un_state & DCD_STATE_FATAL) == DCD_STATE_FATAL) {
   1285 		rval = ENXIO;
   1286 		goto done;
   1287 	}
   1288 
   1289 	while (un->un_state == DCD_STATE_SUSPENDED) {
   1290 		cv_wait(&un->un_suspend_cv, DCD_MUTEX);
   1291 	}
   1292 
   1293 	if ((un->un_state == DCD_STATE_PM_SUSPENDED) && (!nodelay)) {
   1294 		mutex_exit(DCD_MUTEX);
   1295 		if (pm_raise_power(DCD_DEVINFO, 0, DCD_DEVICE_ACTIVE)
   1296 		    != DDI_SUCCESS) {
   1297 			mutex_enter(DCD_MUTEX);
   1298 			rval = EIO;
   1299 			goto done;
   1300 		}
   1301 		mutex_enter(DCD_MUTEX);
   1302 	}
   1303 
   1304 	/*
   1305 	 * set make_dcd_cmd() flags and stat_size here since these
   1306 	 * are unlikely to change
   1307 	 */
   1308 	un->un_cmd_flags = 0;
   1309 
   1310 	un->un_cmd_stat_size = 2;
   1311 
   1312 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG, "dcdopen un=0x%p\n",
   1313 	    (void *)un);
   1314 	/*
   1315 	 * check for previous exclusive open
   1316 	 */
   1317 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1318 	    "exclopen=%x, flag=%x, regopen=%x\n",
   1319 	    un->un_exclopen, flag, un->un_ocmap.regopen[otyp]);
   1320 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1321 	    "Exclusive open flag %x, partmask %x\n",
   1322 	    un->un_exclopen, partmask);
   1323 
   1324 	if (un->un_exclopen & (partmask)) {
   1325 failed_exclusive:
   1326 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1327 		    "exclusive open fails\n");
   1328 		rval = EBUSY;
   1329 		goto done;
   1330 	}
   1331 
   1332 	if (flag & FEXCL) {
   1333 		int i;
   1334 		if (un->un_ocmap.lyropen[part]) {
   1335 			goto failed_exclusive;
   1336 		}
   1337 		for (i = 0; i < (OTYPCNT - 1); i++) {
   1338 			if (un->un_ocmap.regopen[i] & (partmask)) {
   1339 				goto failed_exclusive;
   1340 			}
   1341 		}
   1342 	}
   1343 	if (flag & FWRITE) {
   1344 		mutex_exit(DCD_MUTEX);
   1345 		if (dcd_check_wp(dev)) {
   1346 			sema_v(&un->un_semoclose);
   1347 			return (EROFS);
   1348 		}
   1349 		mutex_enter(DCD_MUTEX);
   1350 	}
   1351 
   1352 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1353 	    "Check Write Protect handled\n");
   1354 
   1355 	if (!nodelay) {
   1356 		mutex_exit(DCD_MUTEX);
   1357 		if ((rval = dcd_ready_and_valid(dev, un)) != 0) {
   1358 			rval = EIO;
   1359 		}
   1360 		(void) pm_idle_component(DCD_DEVINFO, 0);
   1361 		/*
   1362 		 * Fail if device is not ready or if the number of disk
   1363 		 * blocks is zero or negative for non CD devices.
   1364 		 */
   1365 		if (rval || cmlb_partinfo(un->un_dklbhandle,
   1366 		    part, &lblocks, NULL, &partname, NULL, 0) ||
   1367 		    lblocks <= 0) {
   1368 			rval = EIO;
   1369 			mutex_enter(DCD_MUTEX);
   1370 			goto done;
   1371 		}
   1372 		mutex_enter(DCD_MUTEX);
   1373 	}
   1374 
   1375 	if (otyp == OTYP_LYR) {
   1376 		un->un_ocmap.lyropen[part]++;
   1377 	} else {
   1378 		un->un_ocmap.regopen[otyp] |= partmask;
   1379 	}
   1380 
   1381 	/*
   1382 	 * set up open and exclusive open flags
   1383 	 */
   1384 	if (flag & FEXCL) {
   1385 		un->un_exclopen |= (partmask);
   1386 	}
   1387 
   1388 
   1389 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1390 	    "open of part %d type %d\n",
   1391 	    part, otyp);
   1392 
   1393 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1394 	    "Kstats getting updated\n");
   1395 	/*
   1396 	 * only create kstats for disks, CD kstats created in dcdattach
   1397 	 */
   1398 	_NOTE(NO_COMPETING_THREADS_NOW);
   1399 	mutex_exit(DCD_MUTEX);
   1400 	if (un->un_stats == (kstat_t *)0) {
   1401 		un->un_stats = kstat_create("dad", instance,
   1402 		    NULL, "disk", KSTAT_TYPE_IO, 1,
   1403 		    KSTAT_FLAG_PERSISTENT);
   1404 		if (un->un_stats) {
   1405 			un->un_stats->ks_lock = DCD_MUTEX;
   1406 			kstat_install(un->un_stats);
   1407 		}
   1408 
   1409 		/*
   1410 		 * set up partition statistics for each partition
   1411 		 * with number of blocks > 0
   1412 		 */
   1413 		if (!nodelay) {
   1414 			for (i = 0; i < NDKMAP; i++) {
   1415 				if ((un->un_pstats[i] == (kstat_t *)0) &&
   1416 				    (cmlb_partinfo(un->un_dklbhandle,
   1417 				    i, &lblocks, NULL, &partname,
   1418 				    NULL, 0) == 0) && lblocks > 0) {
   1419 					(void) sprintf(kstatname, "dad%d,%s",
   1420 					    instance, partname);
   1421 					un->un_pstats[i] = kstat_create("dad",
   1422 					    instance,
   1423 					    kstatname,
   1424 					    "partition",
   1425 					    KSTAT_TYPE_IO,
   1426 					    1,
   1427 					    KSTAT_FLAG_PERSISTENT);
   1428 					if (un->un_pstats[i]) {
   1429 						un->un_pstats[i]->ks_lock =
   1430 						    DCD_MUTEX;
   1431 						kstat_install(un->un_pstats[i]);
   1432 					}
   1433 				}
   1434 			}
   1435 		}
   1436 		/*
   1437 		 * set up error kstats
   1438 		 */
   1439 		(void) dcd_create_errstats(un, instance);
   1440 	}
   1441 #ifndef lint
   1442 	_NOTE(COMPETING_THREADS_NOW);
   1443 #endif
   1444 
   1445 	sema_v(&un->un_semoclose);
   1446 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "Open success\n");
   1447 	return (0);
   1448 
   1449 done:
   1450 	mutex_exit(DCD_MUTEX);
   1451 	sema_v(&un->un_semoclose);
   1452 	return (rval);
   1453 
   1454 }
   1455 
   1456 /*
   1457  * Test if disk is ready and has a valid geometry.
   1458  */
   1459 static int
   1460 dcd_ready_and_valid(dev_t dev, struct dcd_disk *un)
   1461 {
   1462 	int rval = 1;
   1463 	int g_error = 0;
   1464 
   1465 	mutex_enter(DCD_MUTEX);
   1466 	/*
   1467 	 * cmds outstanding
   1468 	 */
   1469 	if (un->un_ncmds == 0) {
   1470 		(void) dcd_unit_ready(dev);
   1471 	}
   1472 
   1473 	/*
   1474 	 * If device is not yet ready here, inform it is offline
   1475 	 */
   1476 	if (un->un_state == DCD_STATE_NORMAL) {
   1477 		rval = dcd_unit_ready(dev);
   1478 		if (rval != 0 && rval != EACCES) {
   1479 			dcd_offline(un, 1);
   1480 			goto done;
   1481 		}
   1482 	}
   1483 
   1484 	if (un->un_format_in_progress == 0) {
   1485 		g_error = dcd_validate_geometry(un);
   1486 	}
   1487 
   1488 	/*
   1489 	 * check if geometry was valid. We don't check the validity of
   1490 	 * geometry for CDROMS.
   1491 	 */
   1492 
   1493 	if (g_error == DCD_BAD_LABEL) {
   1494 		rval = 1;
   1495 		goto done;
   1496 	}
   1497 
   1498 
   1499 	/*
   1500 	 * the state has changed; inform the media watch routines
   1501 	 */
   1502 	un->un_mediastate = DKIO_INSERTED;
   1503 	cv_broadcast(&un->un_state_cv);
   1504 	rval = 0;
   1505 
   1506 done:
   1507 	mutex_exit(DCD_MUTEX);
   1508 	return (rval);
   1509 }
   1510 
   1511 
   1512 /*ARGSUSED*/
   1513 static int
   1514 dcdclose(dev_t dev, int flag, int otyp, cred_t *cred_p)
   1515 {
   1516 	uchar_t *cp;
   1517 	int i;
   1518 
   1519 	GET_SOFT_STATE(dev);
   1520 
   1521 
   1522 	if (otyp >= OTYPCNT)
   1523 		return (ENXIO);
   1524 
   1525 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1526 	    "close of part %d type %d\n",
   1527 	    part, otyp);
   1528 	sema_p(&un->un_semoclose);
   1529 
   1530 	mutex_enter(DCD_MUTEX);
   1531 
   1532 	if (un->un_exclopen & (1<<part)) {
   1533 		un->un_exclopen &= ~(1<<part);
   1534 	}
   1535 
   1536 	if (otyp == OTYP_LYR) {
   1537 		un->un_ocmap.lyropen[part] -= 1;
   1538 	} else {
   1539 		un->un_ocmap.regopen[otyp] &= ~(1<<part);
   1540 	}
   1541 
   1542 	cp = &un->un_ocmap.chkd[0];
   1543 	while (cp < &un->un_ocmap.chkd[OCSIZE]) {
   1544 		if (*cp != (uchar_t)0) {
   1545 			break;
   1546 		}
   1547 		cp++;
   1548 	}
   1549 
   1550 	if (cp == &un->un_ocmap.chkd[OCSIZE]) {
   1551 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG, "last close\n");
   1552 		if (un->un_state == DCD_STATE_OFFLINE) {
   1553 			dcd_offline(un, 1);
   1554 		}
   1555 
   1556 		mutex_exit(DCD_MUTEX);
   1557 		(void) cmlb_close(un->un_dklbhandle, 0);
   1558 
   1559 		_NOTE(NO_COMPETING_THREADS_NOW);
   1560 		if (un->un_stats) {
   1561 			kstat_delete(un->un_stats);
   1562 			un->un_stats = 0;
   1563 		}
   1564 		for (i = 0; i < NDKMAP; i++) {
   1565 			if (un->un_pstats[i]) {
   1566 				kstat_delete(un->un_pstats[i]);
   1567 				un->un_pstats[i] = (kstat_t *)0;
   1568 			}
   1569 		}
   1570 
   1571 		if (un->un_errstats) {
   1572 			kstat_delete(un->un_errstats);
   1573 			un->un_errstats = (kstat_t *)0;
   1574 		}
   1575 		mutex_enter(DCD_MUTEX);
   1576 
   1577 #ifndef lint
   1578 		_NOTE(COMPETING_THREADS_NOW);
   1579 #endif
   1580 	}
   1581 
   1582 	mutex_exit(DCD_MUTEX);
   1583 	sema_v(&un->un_semoclose);
   1584 	return (0);
   1585 }
   1586 
   1587 static void
   1588 dcd_offline(struct dcd_disk *un, int bechatty)
   1589 {
   1590 	if (bechatty)
   1591 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN, "offline\n");
   1592 
   1593 	mutex_exit(DCD_MUTEX);
   1594 	cmlb_invalidate(un->un_dklbhandle, 0);
   1595 	mutex_enter(DCD_MUTEX);
   1596 }
   1597 
   1598 /*
   1599  * Given the device number return the devinfo pointer
   1600  * from the scsi_device structure.
   1601  */
   1602 /*ARGSUSED*/
   1603 static int
   1604 dcdinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result)
   1605 {
   1606 	dev_t dev;
   1607 	struct dcd_disk *un;
   1608 	int instance, error;
   1609 
   1610 
   1611 	switch (infocmd) {
   1612 	case DDI_INFO_DEVT2DEVINFO:
   1613 		dev = (dev_t)arg;
   1614 		instance = DCDUNIT(dev);
   1615 		if ((un = ddi_get_soft_state(dcd_state, instance)) == NULL)
   1616 			return (DDI_FAILURE);
   1617 		*result = (void *) DCD_DEVINFO;
   1618 		error = DDI_SUCCESS;
   1619 		break;
   1620 	case DDI_INFO_DEVT2INSTANCE:
   1621 		dev = (dev_t)arg;
   1622 		instance = DCDUNIT(dev);
   1623 		*result = (void *)(uintptr_t)instance;
   1624 		error = DDI_SUCCESS;
   1625 		break;
   1626 	default:
   1627 		error = DDI_FAILURE;
   1628 	}
   1629 	return (error);
   1630 }
   1631 
   1632 /*
   1633  * property operation routine.	return the number of blocks for the partition
   1634  * in question or forward the request to the propery facilities.
   1635  */
   1636 static int
   1637 dcd_prop_op(dev_t dev, dev_info_t *dip, ddi_prop_op_t prop_op, int mod_flags,
   1638     char *name, caddr_t valuep, int *lengthp)
   1639 {
   1640 	struct dcd_disk	*un;
   1641 
   1642 	if ((un = ddi_get_soft_state(dcd_state, ddi_get_instance(dip))) == NULL)
   1643 		return (ddi_prop_op(dev, dip, prop_op, mod_flags,
   1644 		    name, valuep, lengthp));
   1645 
   1646 	return (cmlb_prop_op(un->un_dklbhandle,
   1647 	    dev, dip, prop_op, mod_flags, name, valuep, lengthp,
   1648 	    DCDPART(dev), NULL));
   1649 }
   1650 
   1651 /*
   1652  * These routines perform raw i/o operations.
   1653  */
   1654 /*ARGSUSED*/
   1655 void
   1656 dcduscsimin(struct buf *bp)
   1657 {
   1658 
   1659 }
   1660 
   1661 
   1662 static void
   1663 dcdmin(struct buf *bp)
   1664 {
   1665 	struct dcd_disk *un;
   1666 	int instance;
   1667 	minor_t minor = getminor(bp->b_edev);
   1668 	instance = minor >> DCDUNIT_SHIFT;
   1669 	un = ddi_get_soft_state(dcd_state, instance);
   1670 
   1671 	if (bp->b_bcount > un->un_max_xfer_size)
   1672 		bp->b_bcount = un->un_max_xfer_size;
   1673 }
   1674 
   1675 
   1676 /* ARGSUSED2 */
   1677 static int
   1678 dcdread(dev_t dev, struct uio *uio, cred_t *cred_p)
   1679 {
   1680 	int secmask;
   1681 	GET_SOFT_STATE(dev);
   1682 #ifdef lint
   1683 	part = part;
   1684 #endif /* lint */
   1685 	secmask = un->un_secsize - 1;
   1686 
   1687 	if (uio->uio_loffset & ((offset_t)(secmask))) {
   1688 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1689 		    "file offset not modulo %d\n",
   1690 		    un->un_secsize);
   1691 		return (EINVAL);
   1692 	} else if (uio->uio_iov->iov_len & (secmask)) {
   1693 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1694 		    "transfer length not modulo %d\n", un->un_secsize);
   1695 		return (EINVAL);
   1696 	}
   1697 	return (physio(dcdstrategy, (struct buf *)0, dev, B_READ, dcdmin, uio));
   1698 }
   1699 
   1700 /* ARGSUSED2 */
   1701 static int
   1702 dcdaread(dev_t dev, struct aio_req *aio, cred_t *cred_p)
   1703 {
   1704 	int secmask;
   1705 	struct uio *uio = aio->aio_uio;
   1706 	GET_SOFT_STATE(dev);
   1707 #ifdef lint
   1708 	part = part;
   1709 #endif /* lint */
   1710 	secmask = un->un_secsize - 1;
   1711 
   1712 	if (uio->uio_loffset & ((offset_t)(secmask))) {
   1713 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1714 		    "file offset not modulo %d\n",
   1715 		    un->un_secsize);
   1716 		return (EINVAL);
   1717 	} else if (uio->uio_iov->iov_len & (secmask)) {
   1718 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1719 		    "transfer length not modulo %d\n", un->un_secsize);
   1720 		return (EINVAL);
   1721 	}
   1722 	return (aphysio(dcdstrategy, anocancel, dev, B_READ, dcdmin, aio));
   1723 }
   1724 
   1725 /* ARGSUSED2 */
   1726 static int
   1727 dcdwrite(dev_t dev, struct uio *uio, cred_t *cred_p)
   1728 {
   1729 	int secmask;
   1730 	GET_SOFT_STATE(dev);
   1731 #ifdef lint
   1732 	part = part;
   1733 #endif /* lint */
   1734 	secmask = un->un_secsize - 1;
   1735 
   1736 	if (uio->uio_loffset & ((offset_t)(secmask))) {
   1737 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1738 		    "file offset not modulo %d\n",
   1739 		    un->un_secsize);
   1740 		return (EINVAL);
   1741 	} else if (uio->uio_iov->iov_len & (secmask)) {
   1742 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1743 		    "transfer length not modulo %d\n", un->un_secsize);
   1744 		return (EINVAL);
   1745 	}
   1746 	return (physio(dcdstrategy, (struct buf *)0, dev, B_WRITE, dcdmin,
   1747 	    uio));
   1748 }
   1749 
   1750 /* ARGSUSED2 */
   1751 static int
   1752 dcdawrite(dev_t dev, struct aio_req *aio, cred_t *cred_p)
   1753 {
   1754 	int secmask;
   1755 	struct uio *uio = aio->aio_uio;
   1756 	GET_SOFT_STATE(dev);
   1757 #ifdef lint
   1758 	part = part;
   1759 #endif /* lint */
   1760 	secmask = un->un_secsize - 1;
   1761 
   1762 	if (uio->uio_loffset & ((offset_t)(secmask))) {
   1763 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1764 		    "file offset not modulo %d\n",
   1765 		    un->un_secsize);
   1766 		return (EINVAL);
   1767 	} else if (uio->uio_iov->iov_len & (secmask)) {
   1768 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1769 		    "transfer length not modulo %d\n", un->un_secsize);
   1770 		return (EINVAL);
   1771 	}
   1772 	return (aphysio(dcdstrategy, anocancel, dev, B_WRITE, dcdmin, aio));
   1773 }
   1774 
   1775 /*
   1776  * strategy routine
   1777  */
   1778 static int
   1779 dcdstrategy(struct buf *bp)
   1780 {
   1781 	struct dcd_disk *un;
   1782 	struct diskhd *dp;
   1783 	int i;
   1784 	minor_t minor = getminor(bp->b_edev);
   1785 	diskaddr_t p_lblksrt;
   1786 	diskaddr_t lblocks;
   1787 	diskaddr_t bn;
   1788 
   1789 	if ((un = ddi_get_soft_state(dcd_state,
   1790 	    minor >> DCDUNIT_SHIFT)) == NULL ||
   1791 	    un->un_state == DCD_STATE_DUMPING ||
   1792 	    ((un->un_state  & DCD_STATE_FATAL) == DCD_STATE_FATAL)) {
   1793 		SET_BP_ERROR(bp, ((un) ? ENXIO : EIO));
   1794 error:
   1795 		bp->b_resid = bp->b_bcount;
   1796 		biodone(bp);
   1797 		return (0);
   1798 	}
   1799 
   1800 	/*
   1801 	 * If the request size (buf->b_bcount)is greater than the size
   1802 	 * (un->un_max_xfer_size) supported by the target driver fail
   1803 	 * the request with EINVAL error code.
   1804 	 *
   1805 	 * We are not supposed to receive requests exceeding
   1806 	 * un->un_max_xfer_size size because the caller is expected to
   1807 	 * check what is the maximum size that is supported by this
   1808 	 * driver either through ioctl or dcdmin routine(which is private
   1809 	 * to this driver).
   1810 	 * But we have seen cases (like meta driver(md))where dcdstrategy
   1811 	 * called with more than supported size and cause data corruption.
   1812 	 */
   1813 
   1814 	if (bp->b_bcount > un->un_max_xfer_size) {
   1815 		SET_BP_ERROR(bp, EINVAL);
   1816 		goto error;
   1817 	}
   1818 
   1819 	TRACE_2(TR_FAC_DADA, TR_DCDSTRATEGY_START,
   1820 	    "dcdstrategy_start: bp 0x%p un 0x%p", bp, un);
   1821 
   1822 	/*
   1823 	 * Commands may sneak in while we released the mutex in
   1824 	 * DDI_SUSPEND, we should block new commands.
   1825 	 */
   1826 	mutex_enter(DCD_MUTEX);
   1827 	while (un->un_state == DCD_STATE_SUSPENDED) {
   1828 		cv_wait(&un->un_suspend_cv, DCD_MUTEX);
   1829 	}
   1830 
   1831 	if (un->un_state == DCD_STATE_PM_SUSPENDED) {
   1832 		mutex_exit(DCD_MUTEX);
   1833 		(void) pm_idle_component(DCD_DEVINFO, 0);
   1834 		if (pm_raise_power(DCD_DEVINFO, 0,
   1835 		    DCD_DEVICE_ACTIVE) !=  DDI_SUCCESS) {
   1836 			SET_BP_ERROR(bp, EIO);
   1837 			goto error;
   1838 		}
   1839 		mutex_enter(DCD_MUTEX);
   1840 	}
   1841 	mutex_exit(DCD_MUTEX);
   1842 
   1843 	/*
   1844 	 * Map-in the buffer in case starting address is not word aligned.
   1845 	 */
   1846 
   1847 	if (((uintptr_t)bp->b_un.b_addr) & 0x1)
   1848 		bp_mapin(bp);
   1849 
   1850 	bp->b_flags &= ~(B_DONE|B_ERROR);
   1851 	bp->b_resid = 0;
   1852 	bp->av_forw = 0;
   1853 
   1854 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1855 	    "bp->b_bcount %lx\n", bp->b_bcount);
   1856 
   1857 	if (bp != un->un_sbufp) {
   1858 validated:	if (cmlb_partinfo(un->un_dklbhandle,
   1859 		    minor & DCDPART_MASK,
   1860 		    &lblocks,
   1861 		    &p_lblksrt,
   1862 		    NULL,
   1863 		    NULL,
   1864 		    0) == 0) {
   1865 
   1866 			bn = dkblock(bp);
   1867 
   1868 			DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1869 			    "dkblock(bp) is %llu\n", bn);
   1870 
   1871 			i = 0;
   1872 			if (bn < 0) {
   1873 				i = -1;
   1874 			} else if (bn >= lblocks) {
   1875 				/*
   1876 				 * For proper comparison, file system block
   1877 				 * number has to be scaled to actual CD
   1878 				 * transfer size.
   1879 				 * Since all the CDROM operations
   1880 				 * that have Sun Labels are in the correct
   1881 				 * block size this will work for CD's.	This
   1882 				 * will have to change when we have different
   1883 				 * sector sizes.
   1884 				 *
   1885 				 * if bn == lblocks,
   1886 				 * Not an error, resid == count
   1887 				 */
   1888 				if (bn > lblocks) {
   1889 					i = -1;
   1890 				} else {
   1891 					i = 1;
   1892 				}
   1893 			} else if (bp->b_bcount & (un->un_secsize-1)) {
   1894 				/*
   1895 				 * This should really be:
   1896 				 *
   1897 				 * ... if (bp->b_bcount & (un->un_lbasize-1))
   1898 				 *
   1899 				 */
   1900 				i = -1;
   1901 			} else {
   1902 				if (!bp->b_bcount) {
   1903 					printf("Waring : Zero read or Write\n");
   1904 					goto error;
   1905 				}
   1906 				/*
   1907 				 * sort by absolute block number.
   1908 				 */
   1909 				bp->b_resid = bn;
   1910 				bp->b_resid += p_lblksrt;
   1911 				/*
   1912 				 * zero out av_back - this will be a signal
   1913 				 * to dcdstart to go and fetch the resources
   1914 				 */
   1915 				bp->av_back = NO_PKT_ALLOCATED;
   1916 			}
   1917 
   1918 			/*
   1919 			 * Check to see whether or not we are done
   1920 			 * (with or without errors).
   1921 			 */
   1922 
   1923 			if (i != 0) {
   1924 				if (i < 0) {
   1925 					bp->b_flags |= B_ERROR;
   1926 				}
   1927 				goto error;
   1928 			}
   1929 		} else {
   1930 			/*
   1931 			 * opened in NDELAY/NONBLOCK mode?
   1932 			 * Check if disk is ready and has a valid geometry
   1933 			 */
   1934 			if (dcd_ready_and_valid(bp->b_edev, un) == 0) {
   1935 				goto validated;
   1936 			} else {
   1937 				dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   1938 				    "i/o to invalid geometry\n");
   1939 				SET_BP_ERROR(bp, EIO);
   1940 				goto error;
   1941 			}
   1942 		}
   1943 	} else if (BP_HAS_NO_PKT(bp)) {
   1944 		struct udcd_cmd *tscmdp;
   1945 		struct dcd_cmd *tcmdp;
   1946 		/*
   1947 		 * This indicates that it is a special buffer
   1948 		 * This could be a udcd-cmd and hence call bp_mapin just
   1949 		 * in case that it could be a PIO command issued.
   1950 		 */
   1951 		tscmdp = (struct udcd_cmd *)bp->b_forw;
   1952 		tcmdp = tscmdp->udcd_cmd;
   1953 		if ((tcmdp->cmd != ATA_READ_DMA) && (tcmdp->cmd != 0xc9) &&
   1954 		    (tcmdp->cmd != ATA_WRITE_DMA) && (tcmdp->cmd != 0xcb) &&
   1955 		    (tcmdp->cmd != IDENTIFY_DMA) &&
   1956 		    (tcmdp->cmd != ATA_FLUSH_CACHE)) {
   1957 			bp_mapin(bp);
   1958 		}
   1959 	}
   1960 
   1961 	/*
   1962 	 * We are doing it a bit non-standard. That is, the
   1963 	 * head of the b_actf chain is *not* the active command-
   1964 	 * it is just the head of the wait queue. The reason
   1965 	 * we do this is that the head of the b_actf chain is
   1966 	 * guaranteed to not be moved by disksort(), so that
   1967 	 * our restart command (pointed to by
   1968 	 * b_forw) and the head of the wait queue (b_actf) can
   1969 	 * have resources granted without it getting lost in
   1970 	 * the queue at some later point (where we would have
   1971 	 * to go and look for it).
   1972 	 */
   1973 	mutex_enter(DCD_MUTEX);
   1974 
   1975 	DCD_DO_KSTATS(un, kstat_waitq_enter, bp);
   1976 
   1977 	dp = &un->un_utab;
   1978 
   1979 	if (dp->b_actf == NULL) {
   1980 		dp->b_actf = bp;
   1981 		dp->b_actl = bp;
   1982 	} else if ((un->un_state == DCD_STATE_SUSPENDED) &&
   1983 	    bp == un->un_sbufp) {
   1984 		bp->b_actf = dp->b_actf;
   1985 		dp->b_actf = bp;
   1986 	} else {
   1987 		TRACE_3(TR_FAC_DADA, TR_DCDSTRATEGY_DISKSORT_START,
   1988 		    "dcdstrategy_disksort_start: dp 0x%p bp 0x%p un 0x%p",
   1989 		    dp, bp, un);
   1990 		disksort(dp, bp);
   1991 		TRACE_0(TR_FAC_DADA, TR_DCDSTRATEGY_DISKSORT_END,
   1992 		    "dcdstrategy_disksort_end");
   1993 	}
   1994 
   1995 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   1996 	    "ncmd %x , throttle %x, forw 0x%p\n",
   1997 	    un->un_ncmds, un->un_throttle, (void *)dp->b_forw);
   1998 	ASSERT(un->un_ncmds >= 0);
   1999 	ASSERT(un->un_throttle >= 0);
   2000 	if ((un->un_ncmds < un->un_throttle) && (dp->b_forw == NULL)) {
   2001 		dcdstart(un);
   2002 	} else if (BP_HAS_NO_PKT(dp->b_actf)) {
   2003 		struct buf *cmd_bp;
   2004 
   2005 		cmd_bp = dp->b_actf;
   2006 		cmd_bp->av_back = ALLOCATING_PKT;
   2007 		mutex_exit(DCD_MUTEX);
   2008 		/*
   2009 		 * try and map this one
   2010 		 */
   2011 		TRACE_0(TR_FAC_DADA, TR_DCDSTRATEGY_SMALL_WINDOW_START,
   2012 		    "dcdstrategy_small_window_call (begin)");
   2013 
   2014 		make_dcd_cmd(un, cmd_bp, NULL_FUNC);
   2015 
   2016 		TRACE_0(TR_FAC_DADA, TR_DCDSTRATEGY_SMALL_WINDOW_END,
   2017 		    "dcdstrategy_small_window_call (end)");
   2018 
   2019 		/*
   2020 		 * there is a small window where the active cmd
   2021 		 * completes before make_dcd_cmd returns.
   2022 		 * consequently, this cmd never gets started so
   2023 		 * we start it from here
   2024 		 */
   2025 		mutex_enter(DCD_MUTEX);
   2026 		if ((un->un_ncmds < un->un_throttle) &&
   2027 		    (dp->b_forw == NULL)) {
   2028 			dcdstart(un);
   2029 		}
   2030 	}
   2031 	mutex_exit(DCD_MUTEX);
   2032 
   2033 done:
   2034 	TRACE_0(TR_FAC_DADA, TR_DCDSTRATEGY_END, "dcdstrategy_end");
   2035 	return (0);
   2036 }
   2037 
   2038 
   2039 /*
   2040  * Unit start and Completion
   2041  * NOTE: we assume that the caller has at least checked for:
   2042  *		(un->un_ncmds < un->un_throttle)
   2043  *	if not, there is no real harm done, dcd_transport() will
   2044  *	return BUSY
   2045  */
   2046 static void
   2047 dcdstart(struct dcd_disk *un)
   2048 {
   2049 	int status, sort_key;
   2050 	struct buf *bp;
   2051 	struct diskhd *dp;
   2052 	uchar_t state = un->un_last_state;
   2053 
   2054 	TRACE_1(TR_FAC_DADA, TR_DCDSTART_START, "dcdstart_start: un 0x%p", un);
   2055 
   2056 retry:
   2057 	ASSERT(mutex_owned(DCD_MUTEX));
   2058 
   2059 	dp = &un->un_utab;
   2060 	if (((bp = dp->b_actf) == NULL) || (bp->av_back == ALLOCATING_PKT) ||
   2061 	    (dp->b_forw != NULL)) {
   2062 		TRACE_0(TR_FAC_DADA, TR_DCDSTART_NO_WORK_END,
   2063 		    "dcdstart_end (no work)");
   2064 		return;
   2065 	}
   2066 
   2067 	/*
   2068 	 * remove from active queue
   2069 	 */
   2070 	dp->b_actf = bp->b_actf;
   2071 	bp->b_actf = 0;
   2072 
   2073 	/*
   2074 	 * increment ncmds before calling dcd_transport because dcdintr
   2075 	 * may be called before we return from dcd_transport!
   2076 	 */
   2077 	un->un_ncmds++;
   2078 
   2079 	/*
   2080 	 * If measuring stats, mark exit from wait queue and
   2081 	 * entrance into run 'queue' if and only if we are
   2082 	 * going to actually start a command.
   2083 	 * Normally the bp already has a packet at this point
   2084 	 */
   2085 	DCD_DO_KSTATS(un, kstat_waitq_to_runq, bp);
   2086 
   2087 	mutex_exit(DCD_MUTEX);
   2088 
   2089 	if (BP_HAS_NO_PKT(bp)) {
   2090 		make_dcd_cmd(un, bp, dcdrunout);
   2091 		if (BP_HAS_NO_PKT(bp) && !(bp->b_flags & B_ERROR)) {
   2092 			mutex_enter(DCD_MUTEX);
   2093 			DCD_DO_KSTATS(un, kstat_runq_back_to_waitq, bp);
   2094 
   2095 			bp->b_actf = dp->b_actf;
   2096 			dp->b_actf = bp;
   2097 			New_state(un, DCD_STATE_RWAIT);
   2098 			un->un_ncmds--;
   2099 			TRACE_0(TR_FAC_DADA, TR_DCDSTART_NO_RESOURCES_END,
   2100 			    "dcdstart_end (No Resources)");
   2101 			goto done;
   2102 
   2103 		} else if (bp->b_flags & B_ERROR) {
   2104 			mutex_enter(DCD_MUTEX);
   2105 			DCD_DO_KSTATS(un, kstat_runq_exit, bp);
   2106 
   2107 			un->un_ncmds--;
   2108 			bp->b_resid = bp->b_bcount;
   2109 			if (bp->b_error == 0) {
   2110 				SET_BP_ERROR(bp, EIO);
   2111 			}
   2112 
   2113 			/*
   2114 			 * restore old state
   2115 			 */
   2116 			un->un_state = un->un_last_state;
   2117 			un->un_last_state = state;
   2118 
   2119 			mutex_exit(DCD_MUTEX);
   2120 
   2121 			biodone(bp);
   2122 			mutex_enter(DCD_MUTEX);
   2123 			if (un->un_state == DCD_STATE_SUSPENDED) {
   2124 				cv_broadcast(&un->un_disk_busy_cv);
   2125 			}
   2126 
   2127 			if ((un->un_ncmds < un->un_throttle) &&
   2128 			    (dp->b_forw == NULL)) {
   2129 				goto retry;
   2130 			} else {
   2131 				goto done;
   2132 			}
   2133 		}
   2134 	}
   2135 
   2136 	/*
   2137 	 * Restore resid from the packet, b_resid had been the
   2138 	 * disksort key.
   2139 	 */
   2140 	sort_key = bp->b_resid;
   2141 	bp->b_resid = BP_PKT(bp)->pkt_resid;
   2142 	BP_PKT(bp)->pkt_resid = 0;
   2143 
   2144 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   2145 	    "bp->b_resid %lx, pkt_resid %lx\n",
   2146 	    bp->b_resid, BP_PKT(bp)->pkt_resid);
   2147 
   2148 	/*
   2149 	 * We used to check whether or not to try and link commands here.
   2150 	 * Since we have found that there is no performance improvement
   2151 	 * for linked commands, this has not made much sense.
   2152 	 */
   2153 	if ((status = dcd_transport((struct dcd_pkt *)BP_PKT(bp)))
   2154 	    != TRAN_ACCEPT) {
   2155 		mutex_enter(DCD_MUTEX);
   2156 		un->un_ncmds--;
   2157 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   2158 		    "transport returned %x\n", status);
   2159 		if (status == TRAN_BUSY) {
   2160 			DCD_DO_ERRSTATS(un, dcd_transerrs);
   2161 			DCD_DO_KSTATS(un, kstat_runq_back_to_waitq, bp);
   2162 			dcd_handle_tran_busy(bp, dp, un);
   2163 			if (un->un_ncmds > 0) {
   2164 				bp->b_resid = sort_key;
   2165 			}
   2166 		} else {
   2167 			DCD_DO_KSTATS(un, kstat_runq_exit, bp);
   2168 			mutex_exit(DCD_MUTEX);
   2169 
   2170 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2171 			    "transport rejected (%d)\n",
   2172 			    status);
   2173 			SET_BP_ERROR(bp, EIO);
   2174 			bp->b_resid = bp->b_bcount;
   2175 			if (bp != un->un_sbufp) {
   2176 				dcd_destroy_pkt(BP_PKT(bp));
   2177 			}
   2178 			biodone(bp);
   2179 
   2180 			mutex_enter(DCD_MUTEX);
   2181 			if (un->un_state == DCD_STATE_SUSPENDED) {
   2182 				cv_broadcast(&un->un_disk_busy_cv);
   2183 			}
   2184 			if ((un->un_ncmds < un->un_throttle) &&
   2185 			    (dp->b_forw == NULL)) {
   2186 					goto retry;
   2187 			}
   2188 		}
   2189 	} else {
   2190 		mutex_enter(DCD_MUTEX);
   2191 
   2192 		if (dp->b_actf && BP_HAS_NO_PKT(dp->b_actf)) {
   2193 			struct buf *cmd_bp;
   2194 
   2195 			cmd_bp = dp->b_actf;
   2196 			cmd_bp->av_back = ALLOCATING_PKT;
   2197 			mutex_exit(DCD_MUTEX);
   2198 			/*
   2199 			 * try and map this one
   2200 			 */
   2201 			TRACE_0(TR_FAC_DADA, TR_DCASTART_SMALL_WINDOW_START,
   2202 			    "dcdstart_small_window_start");
   2203 
   2204 			make_dcd_cmd(un, cmd_bp, NULL_FUNC);
   2205 
   2206 			TRACE_0(TR_FAC_DADA, TR_DCDSTART_SMALL_WINDOW_END,
   2207 			    "dcdstart_small_window_end");
   2208 			/*
   2209 			 * there is a small window where the active cmd
   2210 			 * completes before make_dcd_cmd returns.
   2211 			 * consequently, this cmd never gets started so
   2212 			 * we start it from here
   2213 			 */
   2214 			mutex_enter(DCD_MUTEX);
   2215 			if ((un->un_ncmds < un->un_throttle) &&
   2216 			    (dp->b_forw == NULL)) {
   2217 				goto retry;
   2218 			}
   2219 		}
   2220 	}
   2221 
   2222 done:
   2223 	ASSERT(mutex_owned(DCD_MUTEX));
   2224 	TRACE_0(TR_FAC_DADA, TR_DCDSTART_END, "dcdstart_end");
   2225 }
   2226 
   2227 /*
   2228  * make_dcd_cmd: create a pkt
   2229  */
   2230 static void
   2231 make_dcd_cmd(struct dcd_disk *un, struct buf *bp, int (*func)())
   2232 {
   2233 	auto int count, com, direction;
   2234 	struct dcd_pkt *pkt;
   2235 	int flags, tval;
   2236 
   2237 	_NOTE(DATA_READABLE_WITHOUT_LOCK(dcd_disk::un_dp))
   2238 	TRACE_3(TR_FAC_DADA, TR_MAKE_DCD_CMD_START,
   2239 	    "make_dcd_cmd_start: un 0x%p bp 0x%p un 0x%p", un, bp, un);
   2240 
   2241 
   2242 	flags = un->un_cmd_flags;
   2243 
   2244 	if (bp != un->un_sbufp) {
   2245 		int partition = DCDPART(bp->b_edev);
   2246 		diskaddr_t p_lblksrt;
   2247 		diskaddr_t lblocks;
   2248 		long secnt;
   2249 		uint32_t blkno;
   2250 		int dkl_nblk, delta;
   2251 		long resid;
   2252 
   2253 		if (cmlb_partinfo(un->un_dklbhandle,
   2254 		    partition,
   2255 		    &lblocks,
   2256 		    &p_lblksrt,
   2257 		    NULL,
   2258 		    NULL,
   2259 		    0) != NULL) {
   2260 			lblocks = 0;
   2261 			p_lblksrt = 0;
   2262 		}
   2263 
   2264 		dkl_nblk = (int)lblocks;
   2265 
   2266 		/*
   2267 		 * Make sure we don't run off the end of a partition.
   2268 		 *
   2269 		 * Put this test here so that we can adjust b_count
   2270 		 * to accurately reflect the actual amount we are
   2271 		 * goint to transfer.
   2272 		 */
   2273 
   2274 		/*
   2275 		 * First, compute partition-relative block number
   2276 		 */
   2277 		blkno = dkblock(bp);
   2278 		secnt = (bp->b_bcount + (un->un_secsize - 1)) >> un->un_secdiv;
   2279 		count = MIN(secnt, dkl_nblk - blkno);
   2280 		if (count != secnt) {
   2281 			/*
   2282 			 * We have an overrun
   2283 			 */
   2284 			resid = (secnt - count) << un->un_secdiv;
   2285 			DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   2286 			    "overrun by %ld sectors\n",
   2287 			    secnt - count);
   2288 			bp->b_bcount -= resid;
   2289 		} else {
   2290 			resid = 0;
   2291 		}
   2292 
   2293 		/*
   2294 		 * Adjust block number to absolute
   2295 		 */
   2296 		delta = (int)p_lblksrt;
   2297 		blkno += delta;
   2298 
   2299 		mutex_enter(DCD_MUTEX);
   2300 		/*
   2301 		 * This is for devices having block size different from
   2302 		 * from DEV_BSIZE (e.g. 2K CDROMs).
   2303 		 */
   2304 		if (un->un_lbasize != un->un_secsize) {
   2305 			blkno >>= un->un_blknoshift;
   2306 			count >>= un->un_blknoshift;
   2307 		}
   2308 		mutex_exit(DCD_MUTEX);
   2309 
   2310 		TRACE_0(TR_FAC_DADA, TR_MAKE_DCD_CMD_INIT_PKT_START,
   2311 		    "make_dcd_cmd_init_pkt_call (begin)");
   2312 		pkt = dcd_init_pkt(ROUTE, NULL, bp,
   2313 		    (uint32_t)sizeof (struct dcd_cmd),
   2314 		    un->un_cmd_stat_size, PP_LEN, PKT_CONSISTENT,
   2315 		    func, (caddr_t)un);
   2316 		TRACE_1(TR_FAC_DADA, TR_MAKE_DCD_CMD_INIT_PKT_END,
   2317 		    "make_dcd_cmd_init_pkt_call (end): pkt 0x%p", pkt);
   2318 		if (!pkt) {
   2319 			bp->b_bcount += resid;
   2320 			bp->av_back = NO_PKT_ALLOCATED;
   2321 			TRACE_0(TR_FAC_DADA,
   2322 			    TR_MAKE_DCD_CMD_NO_PKT_ALLOCATED1_END,
   2323 			    "make_dcd_cmd_end (NO_PKT_ALLOCATED1)");
   2324 			return;
   2325 		}
   2326 		if (bp->b_flags & B_READ) {
   2327 			if ((un->un_dp->options & DMA_SUPPORTTED) ==
   2328 			    DMA_SUPPORTTED) {
   2329 				com = ATA_READ_DMA;
   2330 			} else {
   2331 				if (un->un_dp->options & BLOCK_MODE)
   2332 					com = ATA_READ_MULTIPLE;
   2333 				else
   2334 					com = ATA_READ;
   2335 			}
   2336 			direction = DATA_READ;
   2337 		} else {
   2338 			if ((un->un_dp->options & DMA_SUPPORTTED) ==
   2339 			    DMA_SUPPORTTED) {
   2340 				com = ATA_WRITE_DMA;
   2341 			} else {
   2342 				if (un->un_dp->options & BLOCK_MODE)
   2343 					com = ATA_WRITE_MULTIPLE;
   2344 				else
   2345 					com = ATA_WRITE;
   2346 			}
   2347 			direction = DATA_WRITE;
   2348 		}
   2349 
   2350 		/*
   2351 		 * Save the resid in the packet, temporarily until
   2352 		 * we transport the command.
   2353 		 */
   2354 		pkt->pkt_resid = resid;
   2355 
   2356 		makecommand(pkt, flags, com, blkno, ADD_LBA_MODE,
   2357 		    bp->b_bcount, direction, 0);
   2358 		tval = dcd_io_time;
   2359 	} else {
   2360 
   2361 		struct udcd_cmd *scmd = (struct udcd_cmd *)bp->b_forw;
   2362 
   2363 		/*
   2364 		 * set options
   2365 		 */
   2366 		if ((scmd->udcd_flags & UDCD_SILENT) && !(DEBUGGING)) {
   2367 			flags |= FLAG_SILENT;
   2368 		}
   2369 		if (scmd->udcd_flags &  UDCD_DIAGNOSE)
   2370 			flags |= FLAG_DIAGNOSE;
   2371 
   2372 		if (scmd->udcd_flags & UDCD_NOINTR)
   2373 			flags |= FLAG_NOINTR;
   2374 
   2375 		pkt = dcd_init_pkt(ROUTE, (struct dcd_pkt *)NULL,
   2376 		    (bp->b_bcount)? bp: NULL,
   2377 		    (uint32_t)sizeof (struct dcd_cmd),
   2378 		    2, PP_LEN, PKT_CONSISTENT, func, (caddr_t)un);
   2379 
   2380 		if (!pkt) {
   2381 			bp->av_back = NO_PKT_ALLOCATED;
   2382 			return;
   2383 		}
   2384 
   2385 		makecommand(pkt, 0, scmd->udcd_cmd->cmd,
   2386 		    scmd->udcd_cmd->sector_num.lba_num,
   2387 		    scmd->udcd_cmd->address_mode,
   2388 		    scmd->udcd_cmd->size,
   2389 		    scmd->udcd_cmd->direction, scmd->udcd_cmd->features);
   2390 
   2391 		pkt->pkt_flags = flags;
   2392 		if (scmd->udcd_timeout == 0)
   2393 			tval = dcd_io_time;
   2394 		else
   2395 			tval = scmd->udcd_timeout;
   2396 		/* UDAD interface should be decided. */
   2397 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   2398 		    "udcd interface\n");
   2399 	}
   2400 
   2401 	pkt->pkt_comp = dcdintr;
   2402 	pkt->pkt_time = tval;
   2403 	PKT_SET_BP(pkt, bp);
   2404 	bp->av_back = (struct buf *)pkt;
   2405 
   2406 	TRACE_0(TR_FAC_DADA, TR_MAKE_DCD_CMD_END, "make_dcd_cmd_end");
   2407 }
   2408 
   2409 /*
   2410  * Command completion processing
   2411  */
   2412 static void
   2413 dcdintr(struct dcd_pkt *pkt)
   2414 {
   2415 	struct dcd_disk *un;
   2416 	struct buf *bp;
   2417 	int action;
   2418 	int status;
   2419 
   2420 	bp = PKT_GET_BP(pkt);
   2421 	un = ddi_get_soft_state(dcd_state, DCDUNIT(bp->b_edev));
   2422 
   2423 	TRACE_1(TR_FAC_DADA, TR_DCDINTR_START, "dcdintr_start: un 0x%p", un);
   2424 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "dcdintr\n");
   2425 
   2426 	mutex_enter(DCD_MUTEX);
   2427 	un->un_ncmds--;
   2428 	DCD_DO_KSTATS(un, kstat_runq_exit, bp);
   2429 	ASSERT(un->un_ncmds >= 0);
   2430 
   2431 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   2432 	    "reason %x and Status %x\n", pkt->pkt_reason, SCBP_C(pkt));
   2433 
   2434 	/*
   2435 	 * do most common case first
   2436 	 */
   2437 	if ((pkt->pkt_reason == CMD_CMPLT) && (SCBP_C(pkt) == 0)) {
   2438 		int com = GETATACMD((struct dcd_cmd *)pkt->pkt_cdbp);
   2439 
   2440 		if (un->un_state == DCD_STATE_OFFLINE) {
   2441 			un->un_state = un->un_last_state;
   2442 			dcd_log(DCD_DEVINFO, dcd_label, CE_NOTE,
   2443 			    (const char *) diskokay);
   2444 		}
   2445 		/*
   2446 		 * If the command is a read or a write, and we have
   2447 		 * a non-zero pkt_resid, that is an error. We should
   2448 		 * attempt to retry the operation if possible.
   2449 		 */
   2450 		action = COMMAND_DONE;
   2451 		if (pkt->pkt_resid && (com == ATA_READ || com == ATA_WRITE)) {
   2452 			DCD_DO_ERRSTATS(un, dcd_harderrs);
   2453 			if ((int)PKT_GET_RETRY_CNT(pkt) < dcd_retry_count) {
   2454 				PKT_INCR_RETRY_CNT(pkt, 1);
   2455 				action = QUE_COMMAND;
   2456 			} else {
   2457 				/*
   2458 				 * if we have exhausted retries
   2459 				 * a command with a residual is in error in
   2460 				 * this case.
   2461 				 */
   2462 				action = COMMAND_DONE_ERROR;
   2463 			}
   2464 			dcd_log(DCD_DEVINFO, dcd_label,
   2465 			    CE_WARN, "incomplete %s- %s\n",
   2466 			    (bp->b_flags & B_READ)? "read" : "write",
   2467 			    (action == QUE_COMMAND)? "retrying" :
   2468 			    "giving up");
   2469 		}
   2470 
   2471 		/*
   2472 		 * pkt_resid will reflect, at this point, a residual
   2473 		 * of how many bytes left to be transferred there were
   2474 		 * from the actual scsi command. Add this to b_resid i.e
   2475 		 * the amount this driver could not see to transfer,
   2476 		 * to get the total number of bytes not transfered.
   2477 		 */
   2478 		if (action != QUE_COMMAND) {
   2479 			bp->b_resid += pkt->pkt_resid;
   2480 		}
   2481 
   2482 	} else if (pkt->pkt_reason != CMD_CMPLT) {
   2483 		action = dcd_handle_incomplete(un, bp);
   2484 	}
   2485 
   2486 	/*
   2487 	 * If we are in the middle of syncing or dumping, we have got
   2488 	 * here because dcd_transport has called us explictly after
   2489 	 * completing the command in a polled mode. We don't want to
   2490 	 * have a recursive call into dcd_transport again.
   2491 	 */
   2492 	if (ddi_in_panic() && (action == QUE_COMMAND)) {
   2493 		action = COMMAND_DONE_ERROR;
   2494 	}
   2495 
   2496 	/*
   2497 	 * save pkt reason; consecutive failures are not reported unless
   2498 	 * fatal
   2499 	 * do not reset last_pkt_reason when the cmd was retried and
   2500 	 * succeeded because
   2501 	 * there maybe more commands comming back with last_pkt_reason
   2502 	 */
   2503 	if ((un->un_last_pkt_reason != pkt->pkt_reason) &&
   2504 	    ((pkt->pkt_reason != CMD_CMPLT) ||
   2505 	    (PKT_GET_RETRY_CNT(pkt) == 0))) {
   2506 		un->un_last_pkt_reason = pkt->pkt_reason;
   2507 	}
   2508 
   2509 	switch (action) {
   2510 	case COMMAND_DONE_ERROR:
   2511 error:
   2512 		if (bp->b_resid == 0) {
   2513 			bp->b_resid = bp->b_bcount;
   2514 		}
   2515 		if (bp->b_error == 0) {
   2516 			struct	dcd_cmd *cdbp = (struct dcd_cmd *)pkt->pkt_cdbp;
   2517 			if (cdbp->cmd == ATA_FLUSH_CACHE &&
   2518 			    (pkt->pkt_scbp[0] & STATUS_ATA_ERR) &&
   2519 			    (pkt->pkt_scbp[1] & ERR_ABORT)) {
   2520 				SET_BP_ERROR(bp, ENOTSUP);
   2521 				un->un_flush_not_supported = 1;
   2522 			} else {
   2523 				SET_BP_ERROR(bp, EIO);
   2524 			}
   2525 		}
   2526 		bp->b_flags |= B_ERROR;
   2527 		/*FALLTHROUGH*/
   2528 	case COMMAND_DONE:
   2529 		dcddone_and_mutex_exit(un, bp);
   2530 
   2531 		TRACE_0(TR_FAC_DADA, TR_DCDINTR_COMMAND_DONE_END,
   2532 		    "dcdintr_end (COMMAND_DONE)");
   2533 		return;
   2534 
   2535 	case QUE_COMMAND:
   2536 		if (un->un_ncmds >= un->un_throttle) {
   2537 			struct diskhd *dp = &un->un_utab;
   2538 
   2539 			bp->b_actf = dp->b_actf;
   2540 			dp->b_actf = bp;
   2541 
   2542 			DCD_DO_KSTATS(un, kstat_waitq_enter, bp);
   2543 
   2544 			mutex_exit(DCD_MUTEX);
   2545 			goto exit;
   2546 		}
   2547 
   2548 		un->un_ncmds++;
   2549 		/* reset the pkt reason again */
   2550 		pkt->pkt_reason = 0;
   2551 		DCD_DO_KSTATS(un, kstat_runq_enter, bp);
   2552 		mutex_exit(DCD_MUTEX);
   2553 		if ((status = dcd_transport(BP_PKT(bp))) != TRAN_ACCEPT) {
   2554 			struct diskhd *dp = &un->un_utab;
   2555 
   2556 			mutex_enter(DCD_MUTEX);
   2557 			un->un_ncmds--;
   2558 			if (status == TRAN_BUSY) {
   2559 				DCD_DO_KSTATS(un, kstat_runq_back_to_waitq, bp);
   2560 				dcd_handle_tran_busy(bp, dp, un);
   2561 				mutex_exit(DCD_MUTEX);
   2562 				goto exit;
   2563 			}
   2564 			DCD_DO_ERRSTATS(un, dcd_transerrs);
   2565 			DCD_DO_KSTATS(un, kstat_runq_exit, bp);
   2566 
   2567 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2568 			    "requeue of command fails (%x)\n", status);
   2569 			SET_BP_ERROR(bp, EIO);
   2570 			bp->b_resid = bp->b_bcount;
   2571 
   2572 			dcddone_and_mutex_exit(un, bp);
   2573 			goto exit;
   2574 		}
   2575 		break;
   2576 
   2577 	case JUST_RETURN:
   2578 	default:
   2579 		DCD_DO_KSTATS(un, kstat_waitq_enter, bp);
   2580 		mutex_exit(DCD_MUTEX);
   2581 		break;
   2582 	}
   2583 
   2584 exit:
   2585 	TRACE_0(TR_FAC_DADA, TR_DCDINTR_END, "dcdintr_end");
   2586 }
   2587 
   2588 
   2589 /*
   2590  * Done with a command.
   2591  */
   2592 static void
   2593 dcddone_and_mutex_exit(struct dcd_disk *un, register struct buf *bp)
   2594 {
   2595 	struct diskhd *dp;
   2596 
   2597 	TRACE_1(TR_FAC_DADA, TR_DCDONE_START, "dcddone_start: un 0x%p", un);
   2598 
   2599 	_NOTE(LOCK_RELEASED_AS_SIDE_EFFECT(&un->un_dcd->dcd_mutex));
   2600 
   2601 	dp = &un->un_utab;
   2602 	if (bp == dp->b_forw) {
   2603 		dp->b_forw = NULL;
   2604 	}
   2605 
   2606 	if (un->un_stats) {
   2607 		ulong_t n_done = bp->b_bcount - bp->b_resid;
   2608 		if (bp->b_flags & B_READ) {
   2609 			IOSP->reads++;
   2610 			IOSP->nread += n_done;
   2611 		} else {
   2612 			IOSP->writes++;
   2613 			IOSP->nwritten += n_done;
   2614 		}
   2615 	}
   2616 	if (IO_PARTITION_STATS) {
   2617 		ulong_t n_done = bp->b_bcount - bp->b_resid;
   2618 		if (bp->b_flags & B_READ) {
   2619 			IOSP_PARTITION->reads++;
   2620 			IOSP_PARTITION->nread += n_done;
   2621 		} else {
   2622 			IOSP_PARTITION->writes++;
   2623 			IOSP_PARTITION->nwritten += n_done;
   2624 		}
   2625 	}
   2626 
   2627 	/*
   2628 	 * Start the next one before releasing resources on this one
   2629 	 */
   2630 	if (un->un_state == DCD_STATE_SUSPENDED) {
   2631 		cv_broadcast(&un->un_disk_busy_cv);
   2632 	} else if (dp->b_actf && (un->un_ncmds < un->un_throttle) &&
   2633 	    (dp->b_forw == NULL && un->un_state != DCD_STATE_SUSPENDED)) {
   2634 		dcdstart(un);
   2635 	}
   2636 
   2637 	mutex_exit(DCD_MUTEX);
   2638 
   2639 	if (bp != un->un_sbufp) {
   2640 		dcd_destroy_pkt(BP_PKT(bp));
   2641 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   2642 		    "regular done: resid %ld\n", bp->b_resid);
   2643 	} else {
   2644 		ASSERT(un->un_sbuf_busy);
   2645 	}
   2646 	TRACE_0(TR_FAC_DADA, TR_DCDDONE_BIODONE_CALL, "dcddone_biodone_call");
   2647 
   2648 	biodone(bp);
   2649 
   2650 	(void) pm_idle_component(DCD_DEVINFO, 0);
   2651 
   2652 	TRACE_0(TR_FAC_DADA, TR_DCDDONE_END, "dcddone end");
   2653 }
   2654 
   2655 
   2656 /*
   2657  * reset the disk unless the transport layer has already
   2658  * cleared the problem
   2659  */
   2660 #define	C1	(STAT_ATA_BUS_RESET|STAT_ATA_DEV_RESET|STAT_ATA_ABORTED)
   2661 static void
   2662 dcd_reset_disk(struct dcd_disk *un, struct dcd_pkt *pkt)
   2663 {
   2664 
   2665 	if ((pkt->pkt_statistics & C1) == 0) {
   2666 		mutex_exit(DCD_MUTEX);
   2667 		if (!dcd_reset(ROUTE, RESET_ALL)) {
   2668 			DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   2669 			    "Reset failed");
   2670 		}
   2671 		mutex_enter(DCD_MUTEX);
   2672 	}
   2673 }
   2674 
   2675 static int
   2676 dcd_handle_incomplete(struct dcd_disk *un, struct buf *bp)
   2677 {
   2678 	static char *fail = "ATA transport failed: reason '%s': %s\n";
   2679 	static char *notresp = "disk not responding to selection\n";
   2680 	int rval = COMMAND_DONE_ERROR;
   2681 	int action = COMMAND_SOFT_ERROR;
   2682 	struct dcd_pkt *pkt = BP_PKT(bp);
   2683 	int be_chatty = (un->un_state != DCD_STATE_SUSPENDED) &&
   2684 	    (bp != un->un_sbufp || !(pkt->pkt_flags & FLAG_SILENT));
   2685 
   2686 	ASSERT(mutex_owned(DCD_MUTEX));
   2687 
   2688 	switch (pkt->pkt_reason) {
   2689 
   2690 	case CMD_TIMEOUT:
   2691 		/*
   2692 		 * This Indicates the already the HBA would  have reset
   2693 		 * so Just indicate to retry the command
   2694 		 */
   2695 		break;
   2696 
   2697 	case CMD_INCOMPLETE:
   2698 		action = dcd_check_error(un, bp);
   2699 		DCD_DO_ERRSTATS(un, dcd_transerrs);
   2700 		if (action == COMMAND_HARD_ERROR) {
   2701 			(void) dcd_reset_disk(un, pkt);
   2702 		}
   2703 		break;
   2704 
   2705 	case CMD_FATAL:
   2706 		/*
   2707 		 * Something drastic has gone wrong
   2708 		 */
   2709 		break;
   2710 	case CMD_DMA_DERR:
   2711 	case CMD_DATA_OVR:
   2712 		/* FALLTHROUGH */
   2713 
   2714 	default:
   2715 		/*
   2716 		 * the target may still be running the	command,
   2717 		 * so we should try and reset that target.
   2718 		 */
   2719 		DCD_DO_ERRSTATS(un, dcd_transerrs);
   2720 		if ((pkt->pkt_reason != CMD_RESET) &&
   2721 		    (pkt->pkt_reason != CMD_ABORTED)) {
   2722 			(void) dcd_reset_disk(un, pkt);
   2723 		}
   2724 		break;
   2725 	}
   2726 
   2727 	/*
   2728 	 * If pkt_reason is CMD_RESET/ABORTED, chances are that this pkt got
   2729 	 * reset/aborted because another disk on this bus caused it.
   2730 	 * The disk that caused it, should get CMD_TIMEOUT with pkt_statistics
   2731 	 * of STAT_TIMEOUT/STAT_DEV_RESET
   2732 	 */
   2733 	if ((pkt->pkt_reason == CMD_RESET) ||(pkt->pkt_reason == CMD_ABORTED)) {
   2734 		/* To be written : XXX */
   2735 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   2736 		    "Command aborted\n");
   2737 	}
   2738 
   2739 	if (bp == un->un_sbufp && (pkt->pkt_flags & FLAG_DIAGNOSE)) {
   2740 		rval = COMMAND_DONE_ERROR;
   2741 	} else {
   2742 		if ((rval == COMMAND_DONE_ERROR) &&
   2743 		    (action == COMMAND_SOFT_ERROR) &&
   2744 		    ((int)PKT_GET_RETRY_CNT(pkt) < dcd_retry_count)) {
   2745 			PKT_INCR_RETRY_CNT(pkt, 1);
   2746 			rval = QUE_COMMAND;
   2747 		}
   2748 	}
   2749 
   2750 	if (pkt->pkt_reason == CMD_INCOMPLETE && rval == COMMAND_DONE_ERROR) {
   2751 		/*
   2752 		 * Looks like someone turned off this shoebox.
   2753 		 */
   2754 		if (un->un_state != DCD_STATE_OFFLINE) {
   2755 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2756 			    (const char *) notresp);
   2757 			New_state(un, DCD_STATE_OFFLINE);
   2758 		}
   2759 	} else if (pkt->pkt_reason == CMD_FATAL) {
   2760 		/*
   2761 		 * Suppressing the following message for the time being
   2762 		 * dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2763 		 * (const char *) notresp);
   2764 		 */
   2765 		PKT_INCR_RETRY_CNT(pkt, 6);
   2766 		rval = COMMAND_DONE_ERROR;
   2767 		New_state(un, DCD_STATE_FATAL);
   2768 	} else if (be_chatty) {
   2769 		int in_panic = ddi_in_panic();
   2770 		if (!in_panic || (rval == COMMAND_DONE_ERROR)) {
   2771 			if (((pkt->pkt_reason != un->un_last_pkt_reason) &&
   2772 			    (pkt->pkt_reason != CMD_RESET)) ||
   2773 			    (rval == COMMAND_DONE_ERROR) ||
   2774 			    (dcd_error_level == DCD_ERR_ALL)) {
   2775 				dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2776 				    fail, dcd_rname(pkt->pkt_reason),
   2777 				    (rval == COMMAND_DONE_ERROR) ?
   2778 				    "giving up": "retrying command");
   2779 				DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   2780 				    "retrycount=%x\n",
   2781 				    PKT_GET_RETRY_CNT(pkt));
   2782 			}
   2783 		}
   2784 	}
   2785 error:
   2786 	return (rval);
   2787 }
   2788 
   2789 static int
   2790 dcd_check_error(struct dcd_disk *un, struct buf *bp)
   2791 {
   2792 	struct diskhd *dp = &un->un_utab;
   2793 	struct dcd_pkt *pkt = BP_PKT(bp);
   2794 	int rval = 0;
   2795 	unsigned char status;
   2796 	unsigned char error;
   2797 
   2798 	TRACE_0(TR_FAC_DADA, TR_DCD_CHECK_ERROR_START, "dcd_check_error_start");
   2799 	ASSERT(mutex_owned(DCD_MUTEX));
   2800 
   2801 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   2802 	    "Pkt: 0x%p dp: 0x%p\n", (void *)pkt, (void *)dp);
   2803 
   2804 	/*
   2805 	 * Here we need to check status first and then if error is indicated
   2806 	 * Then the error register.
   2807 	 */
   2808 
   2809 	status = (pkt->pkt_scbp)[0];
   2810 	if ((status & STATUS_ATA_DWF) == STATUS_ATA_DWF) {
   2811 		/*
   2812 		 * There has been a Device Fault  - reason for such error
   2813 		 * is vendor specific
   2814 		 * Action to be taken is - Indicate error and reset device.
   2815 		 */
   2816 
   2817 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN, "Device Fault\n");
   2818 		rval = COMMAND_HARD_ERROR;
   2819 	} else if ((status & STATUS_ATA_CORR) == STATUS_ATA_CORR) {
   2820 
   2821 		/*
   2822 		 * The sector read or written is marginal and hence ECC
   2823 		 * Correction has been applied. Indicate to repair
   2824 		 * Here we need to probably re-assign based on the badblock
   2825 		 * mapping.
   2826 		 */
   2827 
   2828 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2829 		    "Soft Error on block %x\n",
   2830 		    ((struct dcd_cmd *)pkt->pkt_cdbp)->sector_num.lba_num);
   2831 		rval = COMMAND_SOFT_ERROR;
   2832 	} else if ((status & STATUS_ATA_ERR) == STATUS_ATA_ERR) {
   2833 		error = pkt->pkt_scbp[1];
   2834 
   2835 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2836 		    "Command:0x%x,Error:0x%x,Status:0x%x\n",
   2837 		    GETATACMD((struct dcd_cmd *)pkt->pkt_cdbp),
   2838 		    error, status);
   2839 		if ((error &  ERR_AMNF) == ERR_AMNF) {
   2840 			/* Address make not found */
   2841 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2842 			    "Address Mark Not Found");
   2843 		} else if ((error & ERR_TKONF) == ERR_TKONF) {
   2844 			/* Track 0 Not found */
   2845 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2846 			    "Track 0 Not found \n");
   2847 		} else if ((error & ERR_IDNF) == ERR_IDNF) {
   2848 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2849 			    " ID not found \n");
   2850 		} else if ((error &  ERR_UNC) == ERR_UNC) {
   2851 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2852 			    "Uncorrectable data Error: Block %x\n",
   2853 			    ((struct dcd_cmd *)pkt->pkt_cdbp)->
   2854 			    sector_num.lba_num);
   2855 		} else if ((error & ERR_BBK) == ERR_BBK) {
   2856 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2857 			    "Bad block detected: Block %x\n",
   2858 			    ((struct dcd_cmd *)pkt->pkt_cdbp)->
   2859 			    sector_num.lba_num);
   2860 		} else if ((error & ERR_ABORT) == ERR_ABORT) {
   2861 			/* Aborted Command */
   2862 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2863 			    " Aborted Command \n");
   2864 		}
   2865 		/*
   2866 		 * Return the soft error so that the command
   2867 		 * will be retried.
   2868 		 */
   2869 		rval = COMMAND_SOFT_ERROR;
   2870 	}
   2871 
   2872 	TRACE_0(TR_FAC_DADA, TR_DCD_CHECK_ERROR_END, "dcd_check_error_end");
   2873 	return (rval);
   2874 }
   2875 
   2876 
   2877 /*
   2878  *	System Crash Dump routine
   2879  */
   2880 
   2881 #define	NDUMP_RETRIES	5
   2882 
   2883 static int
   2884 dcddump(dev_t dev, caddr_t addr, daddr_t blkno, int nblk)
   2885 {
   2886 	struct dcd_pkt *pkt;
   2887 	int i;
   2888 	struct buf local, *bp;
   2889 	int err;
   2890 	unsigned char com;
   2891 	diskaddr_t p_lblksrt;
   2892 	diskaddr_t lblocks;
   2893 
   2894 	GET_SOFT_STATE(dev);
   2895 #ifdef lint
   2896 	part = part;
   2897 #endif /* lint */
   2898 
   2899 	_NOTE(NOW_INVISIBLE_TO_OTHER_THREADS(*un))
   2900 
   2901 	if ((un->un_state & DCD_STATE_FATAL) == DCD_STATE_FATAL)
   2902 		return (ENXIO);
   2903 
   2904 	if (cmlb_partinfo(un->un_dklbhandle, DCDPART(dev),
   2905 	    &lblocks, &p_lblksrt, NULL, NULL, 0))
   2906 		return (ENXIO);
   2907 
   2908 	if (blkno+nblk > lblocks) {
   2909 		return (EINVAL);
   2910 	}
   2911 
   2912 
   2913 	if ((un->un_state == DCD_STATE_SUSPENDED) ||
   2914 	    (un->un_state == DCD_STATE_PM_SUSPENDED)) {
   2915 		if (pm_raise_power(DCD_DEVINFO, 0,
   2916 		    DCD_DEVICE_ACTIVE) != DDI_SUCCESS) {
   2917 			return (EIO);
   2918 		}
   2919 	}
   2920 
   2921 	/*
   2922 	 * When cpr calls dcddump, we know that dad is in a
   2923 	 * a good state, so no bus reset is required
   2924 	 */
   2925 	un->un_throttle = 0;
   2926 
   2927 	if ((un->un_state != DCD_STATE_SUSPENDED) &&
   2928 	    (un->un_state != DCD_STATE_DUMPING)) {
   2929 
   2930 		New_state(un, DCD_STATE_DUMPING);
   2931 
   2932 		/*
   2933 		 * Reset the bus. I'd like to not have to do this,
   2934 		 * but this is the safest thing to do...
   2935 		 */
   2936 
   2937 		if (dcd_reset(ROUTE, RESET_ALL) == 0) {
   2938 			return (EIO);
   2939 		}
   2940 
   2941 	}
   2942 
   2943 	blkno += p_lblksrt;
   2944 
   2945 	/*
   2946 	 * It should be safe to call the allocator here without
   2947 	 * worrying about being locked for DVMA mapping because
   2948 	 * the address we're passed is already a DVMA mapping
   2949 	 *
   2950 	 * We are also not going to worry about semaphore ownership
   2951 	 * in the dump buffer. Dumping is single threaded at present.
   2952 	 */
   2953 
   2954 	bp = &local;
   2955 	bzero((caddr_t)bp, sizeof (*bp));
   2956 	bp->b_flags = B_BUSY;
   2957 	bp->b_un.b_addr = addr;
   2958 	bp->b_bcount = nblk << DEV_BSHIFT;
   2959 	bp->b_resid = 0;
   2960 
   2961 	for (i = 0; i < NDUMP_RETRIES; i++) {
   2962 		bp->b_flags &= ~B_ERROR;
   2963 		if ((pkt = dcd_init_pkt(ROUTE, NULL, bp,
   2964 		    (uint32_t)sizeof (struct dcd_cmd), 2, PP_LEN,
   2965 		    PKT_CONSISTENT, NULL_FUNC, NULL)) != NULL) {
   2966 			break;
   2967 		}
   2968 		if (i == 0) {
   2969 			if (bp->b_flags & B_ERROR) {
   2970 				dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2971 				    "no resources for dumping; "
   2972 				    "error code: 0x%x, retrying",
   2973 				    geterror(bp));
   2974 			} else {
   2975 				dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   2976 				    "no resources for dumping; retrying");
   2977 			}
   2978 		} else if (i != (NDUMP_RETRIES - 1)) {
   2979 			if (bp->b_flags & B_ERROR) {
   2980 				dcd_log(DCD_DEVINFO, dcd_label, CE_CONT, "no "
   2981 				    "resources for dumping; error code: 0x%x, "
   2982 				    "retrying\n", geterror(bp));
   2983 			}
   2984 		} else {
   2985 			if (bp->b_flags & B_ERROR) {
   2986 				dcd_log(DCD_DEVINFO, dcd_label, CE_CONT,
   2987 				    "no resources for dumping; "
   2988 				    "error code: 0x%x, retries failed, "
   2989 				    "giving up.\n", geterror(bp));
   2990 			} else {
   2991 				dcd_log(DCD_DEVINFO, dcd_label, CE_CONT,
   2992 				    "no resources for dumping; "
   2993 				    "retries failed, giving up.\n");
   2994 			}
   2995 			return (EIO);
   2996 		}
   2997 		delay(10);
   2998 	}
   2999 	if ((un->un_dp->options & DMA_SUPPORTTED) == DMA_SUPPORTTED) {
   3000 		com = ATA_WRITE_DMA;
   3001 	} else {
   3002 		if (un->un_dp->options & BLOCK_MODE)
   3003 			com = ATA_WRITE_MULTIPLE;
   3004 		else
   3005 			com = ATA_WRITE;
   3006 	}
   3007 
   3008 	makecommand(pkt, 0, com, blkno, ADD_LBA_MODE,
   3009 	    (int)nblk*un->un_secsize, DATA_WRITE, 0);
   3010 
   3011 	for (err = EIO, i = 0; i < NDUMP_RETRIES && err == EIO; i++) {
   3012 
   3013 		if (dcd_poll(pkt) == 0) {
   3014 			switch (SCBP_C(pkt)) {
   3015 			case STATUS_GOOD:
   3016 				if (pkt->pkt_resid == 0) {
   3017 					err = 0;
   3018 				}
   3019 				break;
   3020 			case STATUS_ATA_BUSY:
   3021 				(void) dcd_reset(ROUTE, RESET_TARGET);
   3022 				break;
   3023 			default:
   3024 				mutex_enter(DCD_MUTEX);
   3025 				(void) dcd_reset_disk(un, pkt);
   3026 				mutex_exit(DCD_MUTEX);
   3027 				break;
   3028 			}
   3029 		} else if (i > NDUMP_RETRIES/2) {
   3030 			(void) dcd_reset(ROUTE, RESET_ALL);
   3031 		}
   3032 
   3033 	}
   3034 	dcd_destroy_pkt(pkt);
   3035 	return (err);
   3036 }
   3037 
   3038 /*
   3039  * This routine implements the ioctl calls.  It is called
   3040  * from the device switch at normal priority.
   3041  */
   3042 /* ARGSUSED3 */
   3043 static int
   3044 dcdioctl(dev_t dev, int cmd, intptr_t arg, int flag,
   3045 	cred_t *cred_p, int *rval_p)
   3046 {
   3047 	auto int32_t data[512 / (sizeof (int32_t))];
   3048 	struct dk_cinfo *info;
   3049 	struct dk_minfo media_info;
   3050 	struct udcd_cmd *scmd;
   3051 	int i, err;
   3052 	enum uio_seg uioseg = 0;
   3053 	enum dkio_state state = 0;
   3054 #ifdef _MULTI_DATAMODEL
   3055 	struct dadkio_rwcmd rwcmd;
   3056 #endif
   3057 	struct dadkio_rwcmd32 rwcmd32;
   3058 	struct dcd_cmd dcdcmd;
   3059 
   3060 	GET_SOFT_STATE(dev);
   3061 #ifdef lint
   3062 	part = part;
   3063 	state = state;
   3064 	uioseg = uioseg;
   3065 #endif  /* lint */
   3066 
   3067 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   3068 	    "dcd_ioctl : cmd %x, arg %lx\n", cmd, arg);
   3069 
   3070 	bzero((caddr_t)data, sizeof (data));
   3071 
   3072 	switch (cmd) {
   3073 
   3074 #ifdef DCDDEBUG
   3075 /*
   3076  * Following ioctl are for testing RESET/ABORTS
   3077  */
   3078 #define	DKIOCRESET	(DKIOC|14)
   3079 #define	DKIOCABORT	(DKIOC|15)
   3080 
   3081 	case DKIOCRESET:
   3082 		if (ddi_copyin((caddr_t)arg, (caddr_t)data, 4, flag))
   3083 			return (EFAULT);
   3084 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   3085 		    "DKIOCRESET: data = 0x%x\n", data[0]);
   3086 		if (dcd_reset(ROUTE, data[0])) {
   3087 			return (0);
   3088 		} else {
   3089 			return (EIO);
   3090 		}
   3091 	case DKIOCABORT:
   3092 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   3093 		    "DKIOCABORT:\n");
   3094 		if (dcd_abort(ROUTE, (struct dcd_pkt *)0)) {
   3095 			return (0);
   3096 		} else {
   3097 			return (EIO);
   3098 		}
   3099 #endif
   3100 
   3101 	case DKIOCINFO:
   3102 		/*
   3103 		 * Controller Information
   3104 		 */
   3105 		info = (struct dk_cinfo *)data;
   3106 
   3107 		mutex_enter(DCD_MUTEX);
   3108 		switch (un->un_dp->ctype) {
   3109 		default:
   3110 			info->dki_ctype = DKC_DIRECT;
   3111 			break;
   3112 		}
   3113 		mutex_exit(DCD_MUTEX);
   3114 		info->dki_cnum = ddi_get_instance(ddi_get_parent(DCD_DEVINFO));
   3115 		(void) strcpy(info->dki_cname,
   3116 		    ddi_get_name(ddi_get_parent(DCD_DEVINFO)));
   3117 		/*
   3118 		 * Unit Information
   3119 		 */
   3120 		info->dki_unit = ddi_get_instance(DCD_DEVINFO);
   3121 		info->dki_slave = (Tgt(DCD_DCD_DEVP)<<3);
   3122 		(void) strcpy(info->dki_dname, ddi_driver_name(DCD_DEVINFO));
   3123 		info->dki_flags = DKI_FMTVOL;
   3124 		info->dki_partition = DCDPART(dev);
   3125 
   3126 		/*
   3127 		 * Max Transfer size of this device in blocks
   3128 		 */
   3129 		info->dki_maxtransfer = un->un_max_xfer_size / DEV_BSIZE;
   3130 
   3131 		/*
   3132 		 * We can't get from here to there yet
   3133 		 */
   3134 		info->dki_addr = 0;
   3135 		info->dki_space = 0;
   3136 		info->dki_prio = 0;
   3137 		info->dki_vec = 0;
   3138 
   3139 		i = sizeof (struct dk_cinfo);
   3140 		if (ddi_copyout((caddr_t)data, (caddr_t)arg, i, flag))
   3141 			return (EFAULT);
   3142 		else
   3143 			return (0);
   3144 
   3145 	case DKIOCGMEDIAINFO:
   3146 		/*
   3147 		 * As dad target driver is used for IDE disks only
   3148 		 * Can keep the return value hardcoded to FIXED_DISK
   3149 		 */
   3150 		media_info.dki_media_type = DK_FIXED_DISK;
   3151 
   3152 		mutex_enter(DCD_MUTEX);
   3153 		media_info.dki_lbsize = un->un_lbasize;
   3154 		media_info.dki_capacity = un->un_diskcapacity;
   3155 		mutex_exit(DCD_MUTEX);
   3156 
   3157 		if (ddi_copyout(&media_info, (caddr_t)arg,
   3158 		    sizeof (struct dk_minfo), flag))
   3159 			return (EFAULT);
   3160 		else
   3161 			return (0);
   3162 
   3163 	case DKIOCGGEOM:
   3164 	case DKIOCGVTOC:
   3165 	case DKIOCGETEFI:
   3166 
   3167 		mutex_enter(DCD_MUTEX);
   3168 		if (un->un_ncmds == 0) {
   3169 			if ((err = dcd_unit_ready(dev)) != 0) {
   3170 				mutex_exit(DCD_MUTEX);
   3171 				return (err);
   3172 			}
   3173 		}
   3174 
   3175 		mutex_exit(DCD_MUTEX);
   3176 		err = cmlb_ioctl(un->un_dklbhandle, dev, cmd,
   3177 		    arg, flag, cred_p, rval_p, 0);
   3178 		return (err);
   3179 
   3180 	case DKIOCGAPART:
   3181 	case DKIOCSAPART:
   3182 	case DKIOCSGEOM:
   3183 	case DKIOCSVTOC:
   3184 	case DKIOCSETEFI:
   3185 	case DKIOCPARTITION:
   3186 	case DKIOCPARTINFO:
   3187 	case DKIOCGMBOOT:
   3188 	case DKIOCSMBOOT:
   3189 
   3190 		err = cmlb_ioctl(un->un_dklbhandle, dev, cmd,
   3191 		    arg, flag, cred_p, rval_p, 0);
   3192 		return (err);
   3193 
   3194 	case DIOCTL_RWCMD:
   3195 		if (drv_priv(cred_p) != 0) {
   3196 			return (EPERM);
   3197 		}
   3198 
   3199 #ifdef _MULTI_DATAMODEL
   3200 		switch (ddi_model_convert_from(flag & FMODELS)) {
   3201 		case DDI_MODEL_NONE:
   3202 			if (ddi_copyin((caddr_t)arg, (caddr_t)&rwcmd,
   3203 			    sizeof (struct dadkio_rwcmd), flag)) {
   3204 				return (EFAULT);
   3205 			}
   3206 			rwcmd32.cmd = rwcmd.cmd;
   3207 			rwcmd32.flags = rwcmd.flags;
   3208 			rwcmd32.blkaddr = rwcmd.blkaddr;
   3209 			rwcmd32.buflen = rwcmd.buflen;
   3210 			rwcmd32.bufaddr = (caddr32_t)(uintptr_t)rwcmd.bufaddr;
   3211 			break;
   3212 		case DDI_MODEL_ILP32:
   3213 			if (ddi_copyin((caddr_t)arg, (caddr_t)&rwcmd32,
   3214 			    sizeof (struct dadkio_rwcmd32), flag)) {
   3215 				return (EFAULT);
   3216 			}
   3217 			break;
   3218 		}
   3219 #else
   3220 		if (ddi_copyin((caddr_t)arg, (caddr_t)&rwcmd32,
   3221 		    sizeof (struct dadkio_rwcmd32), flag)) {
   3222 			return (EFAULT);
   3223 		}
   3224 #endif
   3225 		mutex_enter(DCD_MUTEX);
   3226 
   3227 		uioseg  = UIO_SYSSPACE;
   3228 		scmd = (struct udcd_cmd *)data;
   3229 		scmd->udcd_cmd = &dcdcmd;
   3230 		/*
   3231 		 * Convert the dadkio_rwcmd structure to udcd_cmd so that
   3232 		 * it can take the normal path to get the io done
   3233 		 */
   3234 		if (rwcmd32.cmd == DADKIO_RWCMD_READ) {
   3235 			if ((un->un_dp->options & DMA_SUPPORTTED) ==
   3236 			    DMA_SUPPORTTED)
   3237 				scmd->udcd_cmd->cmd = ATA_READ_DMA;
   3238 			else
   3239 				scmd->udcd_cmd->cmd = ATA_READ;
   3240 			scmd->udcd_cmd->address_mode = ADD_LBA_MODE;
   3241 			scmd->udcd_cmd->direction = DATA_READ;
   3242 			scmd->udcd_flags |= UDCD_READ|UDCD_SILENT;
   3243 		} else if (rwcmd32.cmd == DADKIO_RWCMD_WRITE) {
   3244 			if ((un->un_dp->options & DMA_SUPPORTTED) ==
   3245 			    DMA_SUPPORTTED)
   3246 				scmd->udcd_cmd->cmd = ATA_WRITE_DMA;
   3247 			else
   3248 				scmd->udcd_cmd->cmd = ATA_WRITE;
   3249 			scmd->udcd_cmd->direction = DATA_WRITE;
   3250 			scmd->udcd_flags |= UDCD_WRITE|UDCD_SILENT;
   3251 		} else {
   3252 			mutex_exit(DCD_MUTEX);
   3253 			return (EINVAL);
   3254 		}
   3255 
   3256 		scmd->udcd_cmd->address_mode = ADD_LBA_MODE;
   3257 		scmd->udcd_cmd->features = 0;
   3258 		scmd->udcd_cmd->size = rwcmd32.buflen;
   3259 		scmd->udcd_cmd->sector_num.lba_num = rwcmd32.blkaddr;
   3260 		scmd->udcd_bufaddr = (caddr_t)(uintptr_t)rwcmd32.bufaddr;
   3261 		scmd->udcd_buflen = rwcmd32.buflen;
   3262 		scmd->udcd_timeout = (ushort_t)dcd_io_time;
   3263 		scmd->udcd_resid = 0ULL;
   3264 		scmd->udcd_status = 0;
   3265 		scmd->udcd_error_reg = 0;
   3266 		scmd->udcd_status_reg = 0;
   3267 
   3268 		mutex_exit(DCD_MUTEX);
   3269 
   3270 		i = dcdioctl_cmd(dev, scmd, UIO_SYSSPACE, UIO_USERSPACE);
   3271 		mutex_enter(DCD_MUTEX);
   3272 		/*
   3273 		 * After return convert the status from scmd to
   3274 		 * dadkio_status
   3275 		 */
   3276 		(void) dcd_translate(&(rwcmd32.status), scmd);
   3277 		rwcmd32.status.resid = scmd->udcd_resid;
   3278 		mutex_exit(DCD_MUTEX);
   3279 
   3280 #ifdef _MULTI_DATAMODEL
   3281 		switch (ddi_model_convert_from(flag & FMODELS)) {
   3282 		case DDI_MODEL_NONE: {
   3283 			int counter;
   3284 			rwcmd.status.status = rwcmd32.status.status;
   3285 			rwcmd.status.resid  = rwcmd32.status.resid;
   3286 			rwcmd.status.failed_blk_is_valid =
   3287 			    rwcmd32.status.failed_blk_is_valid;
   3288 			rwcmd.status.failed_blk = rwcmd32.status.failed_blk;
   3289 			rwcmd.status.fru_code_is_valid =
   3290 			    rwcmd32.status.fru_code_is_valid;
   3291 			rwcmd.status.fru_code = rwcmd32.status.fru_code;
   3292 			for (counter = 0;
   3293 			    counter < DADKIO_ERROR_INFO_LEN; counter++)
   3294 				rwcmd.status.add_error_info[counter] =
   3295 				    rwcmd32.status.add_error_info[counter];
   3296 			}
   3297 			/* Copy out the result back to the user program */
   3298 			if (ddi_copyout((caddr_t)&rwcmd, (caddr_t)arg,
   3299 			    sizeof (struct dadkio_rwcmd), flag)) {
   3300 				if (i != 0) {
   3301 					i = EFAULT;
   3302 				}
   3303 			}
   3304 			break;
   3305 		case DDI_MODEL_ILP32:
   3306 			/* Copy out the result back to the user program */
   3307 			if (ddi_copyout((caddr_t)&rwcmd32, (caddr_t)arg,
   3308 			    sizeof (struct dadkio_rwcmd32), flag)) {
   3309 				if (i != 0) {
   3310 					i = EFAULT;
   3311 				}
   3312 			}
   3313 			break;
   3314 		}
   3315 #else
   3316 		/* Copy out the result back to the user program  */
   3317 		if (ddi_copyout((caddr_t)&rwcmd32, (caddr_t)arg,
   3318 		    sizeof (struct dadkio_rwcmd32), flag)) {
   3319 			if (i != 0)
   3320 				i = EFAULT;
   3321 		}
   3322 #endif
   3323 		return (i);
   3324 
   3325 	case UDCDCMD:	{
   3326 #ifdef	_MULTI_DATAMODEL
   3327 		/*
   3328 		 * For use when a 32 bit app makes a call into a
   3329 		 * 64 bit ioctl
   3330 		 */
   3331 		struct udcd_cmd32	udcd_cmd_32_for_64;
   3332 		struct udcd_cmd32	*ucmd32 = &udcd_cmd_32_for_64;
   3333 		model_t			model;
   3334 #endif /* _MULTI_DATAMODEL */
   3335 
   3336 		if (drv_priv(cred_p) != 0) {
   3337 			return (EPERM);
   3338 		}
   3339 
   3340 		scmd = (struct udcd_cmd *)data;
   3341 
   3342 #ifdef _MULTI_DATAMODEL
   3343 		switch (model = ddi_model_convert_from(flag & FMODELS)) {
   3344 		case DDI_MODEL_ILP32:
   3345 			if (ddi_copyin((caddr_t)arg, ucmd32,
   3346 			    sizeof (struct udcd_cmd32), flag)) {
   3347 				return (EFAULT);
   3348 			}
   3349 			/*
   3350 			 * Convert the ILP32 uscsi data from the
   3351 			 * application to LP64 for internal use.
   3352 			 */
   3353 			udcd_cmd32toudcd_cmd(ucmd32, scmd);
   3354 			break;
   3355 		case DDI_MODEL_NONE:
   3356 			if (ddi_copyin((caddr_t)arg, scmd, sizeof (*scmd),
   3357 			    flag)) {
   3358 				return (EFAULT);
   3359 			}
   3360 			break;
   3361 		}
   3362 #else /* ! _MULTI_DATAMODEL */
   3363 		if (ddi_copyin((caddr_t)arg, (caddr_t)scmd,
   3364 		    sizeof (*scmd), flag)) {
   3365 			return (EFAULT);
   3366 		}
   3367 #endif /* ! _MULTI_DATAMODEL */
   3368 
   3369 		scmd->udcd_flags &= ~UDCD_NOINTR;
   3370 		uioseg = (flag & FKIOCTL)? UIO_SYSSPACE: UIO_USERSPACE;
   3371 
   3372 		i = dcdioctl_cmd(dev, scmd, uioseg, uioseg);
   3373 #ifdef _MULTI_DATAMODEL
   3374 		switch (model) {
   3375 		case DDI_MODEL_ILP32:
   3376 			/*
   3377 			 * Convert back to ILP32 before copyout to the
   3378 			 * application
   3379 			 */
   3380 			udcd_cmdtoudcd_cmd32(scmd, ucmd32);
   3381 			if (ddi_copyout(ucmd32, (caddr_t)arg,
   3382 			    sizeof (*ucmd32), flag)) {
   3383 				if (i != 0)
   3384 					i = EFAULT;
   3385 			}
   3386 			break;
   3387 		case DDI_MODEL_NONE:
   3388 			if (ddi_copyout(scmd, (caddr_t)arg, sizeof (*scmd),
   3389 			    flag)) {
   3390 				if (i != 0)
   3391 					i = EFAULT;
   3392 			}
   3393 			break;
   3394 		}
   3395 #else /* ! _MULTI_DATAMODE */
   3396 		if (ddi_copyout((caddr_t)scmd, (caddr_t)arg,
   3397 		    sizeof (*scmd), flag)) {
   3398 			if (i != 0)
   3399 				i = EFAULT;
   3400 		}
   3401 #endif
   3402 		return (i);
   3403 	}
   3404 	case DKIOCFLUSHWRITECACHE:	{
   3405 		struct dk_callback *dkc = (struct dk_callback *)arg;
   3406 		struct dcd_pkt *pkt;
   3407 		struct buf *bp;
   3408 		int is_sync = 1;
   3409 
   3410 		mutex_enter(DCD_MUTEX);
   3411 		if (un->un_flush_not_supported ||
   3412 		    ! un->un_write_cache_enabled) {
   3413 			i = un->un_flush_not_supported ? ENOTSUP : 0;
   3414 			mutex_exit(DCD_MUTEX);
   3415 			/*
   3416 			 * If a callback was requested: a callback will
   3417 			 * always be done if the caller saw the
   3418 			 * DKIOCFLUSHWRITECACHE ioctl return 0, and
   3419 			 * never done if the caller saw the ioctl return
   3420 			 * an error.
   3421 			 */
   3422 			if ((flag & FKIOCTL) && dkc != NULL &&
   3423 			    dkc->dkc_callback != NULL) {
   3424 				(*dkc->dkc_callback)(dkc->dkc_cookie, i);
   3425 				/*
   3426 				 * Did callback and reported error.
   3427 				 * Since we did a callback, ioctl
   3428 				 * should return 0.
   3429 				 */
   3430 				i = 0;
   3431 			}
   3432 			return (i);
   3433 		}
   3434 
   3435 		/*
   3436 		 * Get the special buffer
   3437 		 */
   3438 		while (un->un_sbuf_busy) {
   3439 			cv_wait(&un->un_sbuf_cv, DCD_MUTEX);
   3440 		}
   3441 		un->un_sbuf_busy = 1;
   3442 		bp  = un->un_sbufp;
   3443 		mutex_exit(DCD_MUTEX);
   3444 
   3445 		pkt = dcd_init_pkt(ROUTE, (struct dcd_pkt *)NULL,
   3446 		    NULL, (uint32_t)sizeof (struct dcd_cmd),
   3447 		    2, PP_LEN, PKT_CONSISTENT, SLEEP_FUNC, (caddr_t)un);
   3448 		ASSERT(pkt != NULL);
   3449 
   3450 		makecommand(pkt, un->un_cmd_flags | FLAG_SILENT,
   3451 		    ATA_FLUSH_CACHE, 0, ADD_LBA_MODE, 0, NO_DATA_XFER, 0);
   3452 
   3453 		pkt->pkt_comp = dcdintr;
   3454 		pkt->pkt_time = DCD_FLUSH_TIME;
   3455 		PKT_SET_BP(pkt, bp);
   3456 
   3457 		bp->av_back = (struct buf *)pkt;
   3458 		bp->b_forw = NULL;
   3459 		bp->b_flags = B_BUSY;
   3460 		bp->b_error = 0;
   3461 		bp->b_edev = dev;
   3462 		bp->b_dev = cmpdev(dev);
   3463 		bp->b_bcount = 0;
   3464 		bp->b_blkno = 0;
   3465 		bp->b_un.b_addr = 0;
   3466 		bp->b_iodone = NULL;
   3467 		bp->b_list = NULL;
   3468 
   3469 		if ((flag & FKIOCTL) && dkc != NULL &&
   3470 		    dkc->dkc_callback != NULL) {
   3471 			struct dk_callback *dkc2 = (struct dk_callback *)
   3472 			    kmem_zalloc(sizeof (*dkc2), KM_SLEEP);
   3473 			bcopy(dkc, dkc2, sizeof (*dkc2));
   3474 
   3475 			bp->b_list = (struct buf *)dkc2;
   3476 			bp->b_iodone = dcdflushdone;
   3477 			is_sync = 0;
   3478 		}
   3479 
   3480 		(void) dcdstrategy(bp);
   3481 
   3482 		i = 0;
   3483 		if (is_sync) {
   3484 			i = biowait(bp);
   3485 			(void) dcdflushdone(bp);
   3486 		}
   3487 
   3488 		return (i);
   3489 	}
   3490 	default:
   3491 		break;
   3492 	}
   3493 	return (ENOTTY);
   3494 }
   3495 
   3496 
   3497 static int
   3498 dcdflushdone(struct buf *bp)
   3499 {
   3500 	struct dcd_disk *un = ddi_get_soft_state(dcd_state,
   3501 	    DCDUNIT(bp->b_edev));
   3502 	struct dcd_pkt *pkt = BP_PKT(bp);
   3503 	struct dk_callback *dkc = (struct dk_callback *)bp->b_list;
   3504 
   3505 	ASSERT(un != NULL);
   3506 	ASSERT(bp == un->un_sbufp);
   3507 	ASSERT(pkt != NULL);
   3508 
   3509 	dcd_destroy_pkt(pkt);
   3510 	bp->av_back = NO_PKT_ALLOCATED;
   3511 
   3512 	if (dkc != NULL) {
   3513 		ASSERT(bp->b_iodone != NULL);
   3514 		(*dkc->dkc_callback)(dkc->dkc_cookie, geterror(bp));
   3515 		kmem_free(dkc, sizeof (*dkc));
   3516 		bp->b_iodone = NULL;
   3517 		bp->b_list = NULL;
   3518 	}
   3519 
   3520 	/*
   3521 	 * Tell anybody who cares that the buffer is now free
   3522 	 */
   3523 	mutex_enter(DCD_MUTEX);
   3524 	un->un_sbuf_busy = 0;
   3525 	cv_signal(&un->un_sbuf_cv);
   3526 	mutex_exit(DCD_MUTEX);
   3527 	return (0);
   3528 }
   3529 
   3530 /*
   3531  * dcdrunout:
   3532  *	the callback function for resource allocation
   3533  *
   3534  * XXX it would be preferable that dcdrunout() scans the whole
   3535  *	list for possible candidates for dcdstart(); this avoids
   3536  *	that a bp at the head of the list whose request cannot be
   3537  *	satisfied is retried again and again
   3538  */
   3539 /*ARGSUSED*/
   3540 static int
   3541 dcdrunout(caddr_t arg)
   3542 {
   3543 	int serviced;
   3544 	struct dcd_disk *un;
   3545 	struct diskhd *dp;
   3546 
   3547 	TRACE_1(TR_FAC_DADA, TR_DCDRUNOUT_START, "dcdrunout_start: arg 0x%p",
   3548 	    arg);
   3549 	serviced = 1;
   3550 
   3551 	un = (struct dcd_disk *)arg;
   3552 	dp = &un->un_utab;
   3553 
   3554 	/*
   3555 	 * We now support passing a structure to the callback
   3556 	 * routine.
   3557 	 */
   3558 	ASSERT(un != NULL);
   3559 	mutex_enter(DCD_MUTEX);
   3560 	if ((un->un_ncmds < un->un_throttle) && (dp->b_forw == NULL)) {
   3561 		dcdstart(un);
   3562 	}
   3563 	if (un->un_state == DCD_STATE_RWAIT) {
   3564 		serviced = 0;
   3565 	}
   3566 	mutex_exit(DCD_MUTEX);
   3567 	TRACE_1(TR_FAC_DADA, TR_DCDRUNOUT_END,
   3568 	    "dcdrunout_end: serviced %d", serviced);
   3569 	return (serviced);
   3570 }
   3571 
   3572 
   3573 /*
   3574  * This routine called to see whether unit is (still) there. Must not
   3575  * be called when un->un_sbufp is in use, and must not be called with
   3576  * an unattached disk. Soft state of disk is restored to what it was
   3577  * upon entry- up to caller to set the correct state.
   3578  *
   3579  * We enter with the disk mutex held.
   3580  */
   3581 
   3582 /* ARGSUSED0 */
   3583 static int
   3584 dcd_unit_ready(dev_t dev)
   3585 {
   3586 #ifndef lint
   3587 	auto struct udcd_cmd dcmd, *com = &dcmd;
   3588 	auto struct dcd_cmd cmdblk;
   3589 #endif
   3590 	int error;
   3591 #ifndef lint
   3592 	GET_SOFT_STATE(dev);
   3593 #endif
   3594 
   3595 	/*
   3596 	 * Now that we protect the special buffer with
   3597 	 * a mutex, we could probably do a mutex_tryenter
   3598 	 * on it here and return failure if it were held...
   3599 	 */
   3600 
   3601 	error = 0;
   3602 	return (error);
   3603 }
   3604 
   3605 /* ARGSUSED0 */
   3606 int
   3607 dcdioctl_cmd(dev_t devp, struct udcd_cmd *in, enum uio_seg cdbspace,
   3608     enum uio_seg dataspace)
   3609 {
   3610 
   3611 	struct buf *bp;
   3612 	struct	udcd_cmd *scmd;
   3613 	struct dcd_pkt *pkt;
   3614 	int	err, rw;
   3615 	caddr_t	cdb;
   3616 	int	flags = 0;
   3617 
   3618 	GET_SOFT_STATE(devp);
   3619 
   3620 #ifdef lint
   3621 	part = part;
   3622 #endif
   3623 
   3624 	/*
   3625 	 * Is this a request to reset the bus?
   3626 	 * if so, we need to do reseting.
   3627 	 */
   3628 
   3629 	if (in->udcd_flags & UDCD_RESET) {
   3630 		int flag = RESET_TARGET;
   3631 		err = dcd_reset(ROUTE, flag) ? 0: EIO;
   3632 		return (err);
   3633 	}
   3634 
   3635 	scmd = in;
   3636 
   3637 
   3638 	/* Do some sanity checks */
   3639 	if (scmd->udcd_buflen <= 0) {
   3640 		if (scmd->udcd_flags & (UDCD_READ | UDCD_WRITE)) {
   3641 			return (EINVAL);
   3642 		} else {
   3643 			scmd->udcd_buflen = 0;
   3644 		}
   3645 	}
   3646 
   3647 	/* Make a copy of the dcd_cmd passed  */
   3648 	cdb = kmem_zalloc(sizeof (struct dcd_cmd), KM_SLEEP);
   3649 	if (cdbspace == UIO_SYSSPACE) {
   3650 		flags |= FKIOCTL;
   3651 	}
   3652 
   3653 	if (ddi_copyin((void *)scmd->udcd_cmd, cdb, sizeof (struct dcd_cmd),
   3654 	    flags)) {
   3655 		kmem_free(cdb, sizeof (struct dcd_cmd));
   3656 		return (EFAULT);
   3657 	}
   3658 	scmd = (struct udcd_cmd *)kmem_alloc(sizeof (*scmd), KM_SLEEP);
   3659 	bcopy((caddr_t)in, (caddr_t)scmd, sizeof (*scmd));
   3660 	scmd->udcd_cmd = (struct dcd_cmd *)cdb;
   3661 	rw = (scmd->udcd_flags & UDCD_READ) ? B_READ: B_WRITE;
   3662 
   3663 
   3664 	/*
   3665 	 * Get the special buffer
   3666 	 */
   3667 
   3668 	mutex_enter(DCD_MUTEX);
   3669 	while (un->un_sbuf_busy) {
   3670 		if (cv_wait_sig(&un->un_sbuf_cv, DCD_MUTEX) == 0) {
   3671 			kmem_free(scmd->udcd_cmd, sizeof (struct dcd_cmd));
   3672 			kmem_free((caddr_t)scmd, sizeof (*scmd));
   3673 			mutex_exit(DCD_MUTEX);
   3674 			return (EINTR);
   3675 		}
   3676 	}
   3677 
   3678 	un->un_sbuf_busy = 1;
   3679 	bp  = un->un_sbufp;
   3680 	mutex_exit(DCD_MUTEX);
   3681 
   3682 
   3683 	/*
   3684 	 * If we are going to do actual I/O, let physio do all the
   3685 	 * things
   3686 	 */
   3687 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   3688 	    "dcdioctl_cmd : buflen %x\n", scmd->udcd_buflen);
   3689 
   3690 	if (scmd->udcd_buflen) {
   3691 		auto struct iovec aiov;
   3692 		auto struct uio auio;
   3693 		struct uio *uio = &auio;
   3694 
   3695 		bzero((caddr_t)&auio, sizeof (struct uio));
   3696 		bzero((caddr_t)&aiov, sizeof (struct iovec));
   3697 
   3698 		aiov.iov_base = scmd->udcd_bufaddr;
   3699 		aiov.iov_len = scmd->udcd_buflen;
   3700 
   3701 		uio->uio_iov = &aiov;
   3702 		uio->uio_iovcnt = 1;
   3703 		uio->uio_resid = scmd->udcd_buflen;
   3704 		uio->uio_segflg = dataspace;
   3705 
   3706 		/*
   3707 		 * Let physio do the rest...
   3708 		 */
   3709 		bp->av_back = NO_PKT_ALLOCATED;
   3710 		bp->b_forw = (struct buf *)scmd;
   3711 		err = physio(dcdstrategy, bp, devp, rw, dcdudcdmin, uio);
   3712 	} else {
   3713 		/*
   3714 		 * We have to mimic what physio would do here.
   3715 		 */
   3716 		bp->av_back = NO_PKT_ALLOCATED;
   3717 		bp->b_forw = (struct buf *)scmd;
   3718 		bp->b_flags = B_BUSY | rw;
   3719 		bp->b_edev = devp;
   3720 		bp->b_dev = cmpdev(devp);
   3721 		bp->b_bcount = bp->b_blkno = 0;
   3722 		(void) dcdstrategy(bp);
   3723 		err = biowait(bp);
   3724 	}
   3725 
   3726 done:
   3727 	if ((pkt = BP_PKT(bp)) != NULL) {
   3728 		bp->av_back = NO_PKT_ALLOCATED;
   3729 		/* we need to update the completion status of udcd command */
   3730 		in->udcd_resid = bp->b_resid;
   3731 		in->udcd_status_reg = SCBP_C(pkt);
   3732 		/* XXX: we need to give error_reg also */
   3733 		dcd_destroy_pkt(pkt);
   3734 	}
   3735 	/*
   3736 	 * Tell anybody who cares that the buffer is now free
   3737 	 */
   3738 	mutex_enter(DCD_MUTEX);
   3739 	un->un_sbuf_busy = 0;
   3740 	cv_signal(&un->un_sbuf_cv);
   3741 	mutex_exit(DCD_MUTEX);
   3742 
   3743 	kmem_free(scmd->udcd_cmd, sizeof (struct dcd_cmd));
   3744 	kmem_free((caddr_t)scmd, sizeof (*scmd));
   3745 	return (err);
   3746 }
   3747 
   3748 static void
   3749 dcdudcdmin(struct buf *bp)
   3750 {
   3751 
   3752 #ifdef lint
   3753 	bp = bp;
   3754 #endif
   3755 
   3756 }
   3757 
   3758 /*
   3759  * restart a cmd from timeout() context
   3760  *
   3761  * the cmd is expected to be in un_utab.b_forw. If this pointer is non-zero
   3762  * a restart timeout request has been issued and no new timeouts should
   3763  * be requested. b_forw is reset when the cmd eventually completes in
   3764  * dcddone_and_mutex_exit()
   3765  */
   3766 void
   3767 dcdrestart(void *arg)
   3768 {
   3769 	struct dcd_disk *un = (struct dcd_disk *)arg;
   3770 	struct buf *bp;
   3771 	int status;
   3772 
   3773 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG, "dcdrestart\n");
   3774 
   3775 	mutex_enter(DCD_MUTEX);
   3776 	bp = un->un_utab.b_forw;
   3777 	if (bp) {
   3778 		un->un_ncmds++;
   3779 		DCD_DO_KSTATS(un, kstat_waitq_to_runq, bp);
   3780 	}
   3781 
   3782 
   3783 	if (bp) {
   3784 		struct dcd_pkt *pkt = BP_PKT(bp);
   3785 
   3786 		mutex_exit(DCD_MUTEX);
   3787 
   3788 		pkt->pkt_flags = 0;
   3789 
   3790 		if ((status = dcd_transport(pkt)) != TRAN_ACCEPT) {
   3791 			mutex_enter(DCD_MUTEX);
   3792 			DCD_DO_KSTATS(un, kstat_runq_back_to_waitq, bp);
   3793 			un->un_ncmds--;
   3794 			if (status == TRAN_BUSY) {
   3795 				/* XXX : To be checked */
   3796 				/*
   3797 				 * if (un->un_throttle > 1) {
   3798 				 *	ASSERT(un->un_ncmds >= 0);
   3799 				 *	un->un_throttle = un->un_ncmds;
   3800 				 * }
   3801 				 */
   3802 				un->un_reissued_timeid =
   3803 				    timeout(dcdrestart, (caddr_t)un,
   3804 				    DCD_BSY_TIMEOUT/500);
   3805 				mutex_exit(DCD_MUTEX);
   3806 				return;
   3807 			}
   3808 			DCD_DO_ERRSTATS(un, dcd_transerrs);
   3809 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   3810 			    "dcdrestart transport failed (%x)\n", status);
   3811 			bp->b_resid = bp->b_bcount;
   3812 			SET_BP_ERROR(bp, EIO);
   3813 
   3814 			DCD_DO_KSTATS(un, kstat_waitq_exit, bp);
   3815 			un->un_reissued_timeid = 0L;
   3816 			dcddone_and_mutex_exit(un, bp);
   3817 			return;
   3818 		}
   3819 		mutex_enter(DCD_MUTEX);
   3820 	}
   3821 	un->un_reissued_timeid = 0L;
   3822 	mutex_exit(DCD_MUTEX);
   3823 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG, "dcdrestart done\n");
   3824 }
   3825 
   3826 /*
   3827  * This routine gets called to reset the throttle to its saved
   3828  * value wheneven we lower the throttle.
   3829  */
   3830 void
   3831 dcd_reset_throttle(caddr_t arg)
   3832 {
   3833 	struct dcd_disk *un = (struct dcd_disk *)arg;
   3834 	struct diskhd *dp;
   3835 
   3836 	mutex_enter(DCD_MUTEX);
   3837 	dp = &un->un_utab;
   3838 
   3839 	/*
   3840 	 * start any commands that didn't start while throttling.
   3841 	 */
   3842 	if (dp->b_actf && (un->un_ncmds < un->un_throttle) &&
   3843 	    (dp->b_forw == NULL)) {
   3844 		dcdstart(un);
   3845 	}
   3846 	mutex_exit(DCD_MUTEX);
   3847 }
   3848 
   3849 
   3850 /*
   3851  * This routine handles the case when a TRAN_BUSY is
   3852  * returned by HBA.
   3853  *
   3854  * If there are some commands already in the transport, the
   3855  * bp can be put back on queue and it will
   3856  * be retried when the queue is emptied after command
   3857  * completes. But if there is no command in the tranport
   3858  * and it still return busy, we have to retry the command
   3859  * after some time like 10ms.
   3860  */
   3861 /* ARGSUSED0 */
   3862 static void
   3863 dcd_handle_tran_busy(struct buf *bp, struct diskhd *dp, struct dcd_disk *un)
   3864 {
   3865 	ASSERT(mutex_owned(DCD_MUTEX));
   3866 
   3867 
   3868 	if (dp->b_forw == NULL || dp->b_forw == bp) {
   3869 		dp->b_forw = bp;
   3870 	} else if (dp->b_forw != bp) {
   3871 		bp->b_actf = dp->b_actf;
   3872 		dp->b_actf = bp;
   3873 
   3874 	}
   3875 	if (!un->un_reissued_timeid) {
   3876 		un->un_reissued_timeid =
   3877 		    timeout(dcdrestart, (caddr_t)un, DCD_BSY_TIMEOUT/500);
   3878 	}
   3879 }
   3880 
   3881 static int
   3882 dcd_write_deviceid(struct dcd_disk *un)
   3883 {
   3884 
   3885 	int 	status;
   3886 	diskaddr_t blk;
   3887 	struct udcd_cmd ucmd;
   3888 	struct dcd_cmd cdb;
   3889 	struct dk_devid	*dkdevid;
   3890 	uint_t *ip, chksum;
   3891 	int	i;
   3892 	dev_t	dev;
   3893 
   3894 	mutex_exit(DCD_MUTEX);
   3895 	if (cmlb_get_devid_block(un->un_dklbhandle, &blk, 0)) {
   3896 		mutex_enter(DCD_MUTEX);
   3897 		return (EINVAL);
   3898 	}
   3899 	mutex_enter(DCD_MUTEX);
   3900 
   3901 	/* Allocate the buffer */
   3902 	dkdevid = kmem_zalloc(un->un_secsize, KM_SLEEP);
   3903 
   3904 	/* Fill in the revision */
   3905 	dkdevid->dkd_rev_hi = DK_DEVID_REV_MSB;
   3906 	dkdevid->dkd_rev_lo = DK_DEVID_REV_LSB;
   3907 
   3908 	/* Copy in the device id */
   3909 	bcopy(un->un_devid, &dkdevid->dkd_devid,
   3910 	    ddi_devid_sizeof(un->un_devid));
   3911 
   3912 	/* Calculate the chksum */
   3913 	chksum = 0;
   3914 	ip = (uint_t *)dkdevid;
   3915 	for (i = 0; i < ((un->un_secsize - sizeof (int))/sizeof (int)); i++)
   3916 		chksum ^= ip[i];
   3917 
   3918 	/* Fill in the checksum */
   3919 	DKD_FORMCHKSUM(chksum, dkdevid);
   3920 
   3921 	(void) bzero((caddr_t)&ucmd, sizeof (ucmd));
   3922 	(void) bzero((caddr_t)&cdb, sizeof (struct dcd_cmd));
   3923 
   3924 	if ((un->un_dp->options & DMA_SUPPORTTED) == DMA_SUPPORTTED) {
   3925 		cdb.cmd = ATA_WRITE_DMA;
   3926 	} else {
   3927 		if (un->un_dp->options & BLOCK_MODE)
   3928 			cdb.cmd = ATA_WRITE_MULTIPLE;
   3929 		else
   3930 			cdb.cmd = ATA_WRITE;
   3931 	}
   3932 	cdb.size = un->un_secsize;
   3933 	cdb.sector_num.lba_num = blk;
   3934 	cdb.address_mode = ADD_LBA_MODE;
   3935 	cdb.direction = DATA_WRITE;
   3936 
   3937 	ucmd.udcd_flags = UDCD_WRITE;
   3938 	ucmd.udcd_cmd =  &cdb;
   3939 	ucmd.udcd_bufaddr = (caddr_t)dkdevid;
   3940 	ucmd.udcd_buflen = un->un_secsize;
   3941 	ucmd.udcd_flags |= UDCD_SILENT;
   3942 	dev = makedevice(ddi_driver_major(DCD_DEVINFO),
   3943 	    ddi_get_instance(DCD_DEVINFO) << DCDUNIT_SHIFT);
   3944 	mutex_exit(DCD_MUTEX);
   3945 	status = dcdioctl_cmd(dev, &ucmd, UIO_SYSSPACE, UIO_SYSSPACE);
   3946 	mutex_enter(DCD_MUTEX);
   3947 
   3948 	kmem_free(dkdevid, un->un_secsize);
   3949 	return (status);
   3950 }
   3951 
   3952 static int
   3953 dcd_read_deviceid(struct dcd_disk *un)
   3954 {
   3955 	int status;
   3956 	diskaddr_t blk;
   3957 	struct udcd_cmd ucmd;
   3958 	struct dcd_cmd cdb;
   3959 	struct dk_devid *dkdevid;
   3960 	uint_t *ip;
   3961 	int chksum;
   3962 	int i, sz;
   3963 	dev_t dev;
   3964 
   3965 	mutex_exit(DCD_MUTEX);
   3966 	if (cmlb_get_devid_block(un->un_dklbhandle, &blk, 0)) {
   3967 		mutex_enter(DCD_MUTEX);
   3968 		return (EINVAL);
   3969 	}
   3970 	mutex_enter(DCD_MUTEX);
   3971 
   3972 	dkdevid = kmem_alloc(un->un_secsize, KM_SLEEP);
   3973 
   3974 	(void) bzero((caddr_t)&ucmd, sizeof (ucmd));
   3975 	(void) bzero((caddr_t)&cdb, sizeof (cdb));
   3976 
   3977 	if ((un->un_dp->options & DMA_SUPPORTTED) == DMA_SUPPORTTED) {
   3978 		cdb.cmd = ATA_READ_DMA;
   3979 	} else {
   3980 		if (un->un_dp->options & BLOCK_MODE)
   3981 			cdb.cmd = ATA_READ_MULTIPLE;
   3982 		else
   3983 			cdb.cmd = ATA_READ;
   3984 	}
   3985 	cdb.size = un->un_secsize;
   3986 	cdb.sector_num.lba_num = blk;
   3987 	cdb.address_mode = ADD_LBA_MODE;
   3988 	cdb.direction = DATA_READ;
   3989 
   3990 	ucmd.udcd_flags = UDCD_READ;
   3991 	ucmd.udcd_cmd =  &cdb;
   3992 	ucmd.udcd_bufaddr = (caddr_t)dkdevid;
   3993 	ucmd.udcd_buflen = un->un_secsize;
   3994 	ucmd.udcd_flags |= UDCD_SILENT;
   3995 	dev = makedevice(ddi_driver_major(DCD_DEVINFO),
   3996 	    ddi_get_instance(DCD_DEVINFO) << DCDUNIT_SHIFT);
   3997 	mutex_exit(DCD_MUTEX);
   3998 	status = dcdioctl_cmd(dev, &ucmd, UIO_SYSSPACE, UIO_SYSSPACE);
   3999 	mutex_enter(DCD_MUTEX);
   4000 
   4001 	if (status != 0) {
   4002 		kmem_free((caddr_t)dkdevid, un->un_secsize);
   4003 		return (status);
   4004 	}
   4005 
   4006 	/* Validate the revision */
   4007 
   4008 	if ((dkdevid->dkd_rev_hi != DK_DEVID_REV_MSB) ||
   4009 	    (dkdevid->dkd_rev_lo != DK_DEVID_REV_LSB)) {
   4010 		kmem_free((caddr_t)dkdevid, un->un_secsize);
   4011 		return (EINVAL);
   4012 	}
   4013 
   4014 	/* Calculate the checksum */
   4015 	chksum = 0;
   4016 	ip = (uint_t *)dkdevid;
   4017 	for (i = 0; i < ((un->un_secsize - sizeof (int))/sizeof (int)); i++)
   4018 		chksum ^= ip[i];
   4019 
   4020 	/* Compare the checksums */
   4021 
   4022 	if (DKD_GETCHKSUM(dkdevid) != chksum) {
   4023 		kmem_free((caddr_t)dkdevid, un->un_secsize);
   4024 		return (EINVAL);
   4025 	}
   4026 
   4027 	/* VAlidate the device id */
   4028 	if (ddi_devid_valid((ddi_devid_t)&dkdevid->dkd_devid) != DDI_SUCCESS) {
   4029 		kmem_free((caddr_t)dkdevid, un->un_secsize);
   4030 		return (EINVAL);
   4031 	}
   4032 
   4033 	/* return a copy of the device id */
   4034 	sz = ddi_devid_sizeof((ddi_devid_t)&dkdevid->dkd_devid);
   4035 	un->un_devid = (ddi_devid_t)kmem_alloc(sz, KM_SLEEP);
   4036 	bcopy(&dkdevid->dkd_devid, un->un_devid, sz);
   4037 	kmem_free((caddr_t)dkdevid, un->un_secsize);
   4038 
   4039 	return (0);
   4040 }
   4041 
   4042 /*
   4043  * Return the device id for the device.
   4044  * 1. If the device ID exists then just return it - nothing to do in that case.
   4045  * 2. Build one from the drives model number and serial number.
   4046  * 3. If there is a problem in building it from serial/model #, then try
   4047  * to read it from the acyl region of the disk.
   4048  * Note: If this function is unable to return a valid ID then the calling
   4049  * point will invoke the routine to create a fabricated ID ans stor it on the
   4050  * acyl region of the disk.
   4051  */
   4052 static ddi_devid_t
   4053 dcd_get_devid(struct dcd_disk *un)
   4054 {
   4055 	int		rc;
   4056 
   4057 	/* If already registered, return that value */
   4058 	if (un->un_devid != NULL)
   4059 		return (un->un_devid);
   4060 
   4061 	/* Build a devid from model and serial number, if present */
   4062 	rc = dcd_make_devid_from_serial(un);
   4063 
   4064 	if (rc != DDI_SUCCESS) {
   4065 		/* Read the devid from the disk. */
   4066 		if (dcd_read_deviceid(un))
   4067 			return (NULL);
   4068 	}
   4069 
   4070 	(void) ddi_devid_register(DCD_DEVINFO, un->un_devid);
   4071 	return (un->un_devid);
   4072 }
   4073 
   4074 
   4075 static ddi_devid_t
   4076 dcd_create_devid(struct dcd_disk *un)
   4077 {
   4078 	if (ddi_devid_init(DCD_DEVINFO, DEVID_FAB, 0, NULL, (ddi_devid_t *)
   4079 	    &un->un_devid) == DDI_FAILURE)
   4080 		return (NULL);
   4081 
   4082 	if (dcd_write_deviceid(un)) {
   4083 		ddi_devid_free(un->un_devid);
   4084 		un->un_devid = NULL;
   4085 		return (NULL);
   4086 	}
   4087 
   4088 	(void) ddi_devid_register(DCD_DEVINFO, un->un_devid);
   4089 	return (un->un_devid);
   4090 }
   4091 
   4092 /*
   4093  * Build a devid from the model and serial number, if present
   4094  * Return DDI_SUCCESS or DDI_FAILURE.
   4095  */
   4096 static int
   4097 dcd_make_devid_from_serial(struct dcd_disk *un)
   4098 {
   4099 	int	rc = DDI_SUCCESS;
   4100 	char	*hwid;
   4101 	char	*model;
   4102 	int	model_len;
   4103 	char	*serno;
   4104 	int	serno_len;
   4105 	int	total_len;
   4106 
   4107 	/* initialize the model and serial number information */
   4108 	model = un->un_dcd->dcd_ident->dcd_model;
   4109 	model_len = DCD_MODEL_NUMBER_LENGTH;
   4110 	serno = un->un_dcd->dcd_ident->dcd_drvser;
   4111 	serno_len = DCD_SERIAL_NUMBER_LENGTH;
   4112 
   4113 	/* Verify the model and serial number */
   4114 	dcd_validate_model_serial(model, &model_len, model_len);
   4115 	if (model_len == 0) {
   4116 		rc = DDI_FAILURE;
   4117 		goto out;
   4118 	}
   4119 	dcd_validate_model_serial(serno, &serno_len, serno_len);
   4120 	if (serno_len == 0) {
   4121 		rc = DDI_FAILURE;
   4122 		goto out;
   4123 	}
   4124 
   4125 	/*
   4126 	 * The device ID will be concatenation of the model number,
   4127 	 * the '=' separator, the serial number. Allocate
   4128 	 * the string and concatenate the components.
   4129 	 */
   4130 	total_len = model_len + 1 + serno_len;
   4131 	hwid = kmem_alloc(total_len, KM_SLEEP);
   4132 	bcopy((caddr_t)model, (caddr_t)hwid, model_len);
   4133 	bcopy((caddr_t)"=", (caddr_t)&hwid[model_len], 1);
   4134 	bcopy((caddr_t)serno, (caddr_t)&hwid[model_len + 1], serno_len);
   4135 
   4136 	/* Initialize the device ID, trailing NULL not included */
   4137 	rc = ddi_devid_init(DCD_DEVINFO, DEVID_ATA_SERIAL, total_len,
   4138 	    hwid, (ddi_devid_t *)&un->un_devid);
   4139 
   4140 	/* Free the allocated string */
   4141 	kmem_free(hwid, total_len);
   4142 
   4143 out:	return (rc);
   4144 }
   4145 
   4146 /*
   4147  * Test for a valid model or serial number. Assume that a valid representation
   4148  * contains at least one character that is neither a space, 0 digit, or NULL.
   4149  * Trim trailing blanks and NULLS from returned length.
   4150  */
   4151 static void
   4152 dcd_validate_model_serial(char *str, int *retlen, int totallen)
   4153 {
   4154 	char		ch;
   4155 	boolean_t	ret = B_FALSE;
   4156 	int		i;
   4157 	int		tb;
   4158 
   4159 	for (i = 0, tb = 0; i < totallen; i++) {
   4160 		ch = *str++;
   4161 		if ((ch != ' ') && (ch != '\0') && (ch != '0'))
   4162 			ret = B_TRUE;
   4163 		if ((ch == ' ') || (ch == '\0'))
   4164 			tb++;
   4165 		else
   4166 			tb = 0;
   4167 	}
   4168 
   4169 	if (ret == B_TRUE) {
   4170 		/* Atleast one non 0 or blank character. */
   4171 		*retlen = totallen - tb;
   4172 	} else {
   4173 		*retlen = 0;
   4174 	}
   4175 }
   4176 
   4177 #ifndef lint
   4178 void
   4179 clean_print(dev_info_t *dev, char *label, uint_t level,
   4180 	char *title, char *data, int len)
   4181 {
   4182 	int	i;
   4183 	char	buf[256];
   4184 
   4185 	(void) sprintf(buf, "%s:", title);
   4186 	for (i = 0; i < len; i++) {
   4187 		(void) sprintf(&buf[strlen(buf)], "0x%x ", (data[i] & 0xff));
   4188 	}
   4189 	(void) sprintf(&buf[strlen(buf)], "\n");
   4190 
   4191 	dcd_log(dev, label, level, "%s", buf);
   4192 }
   4193 #endif /* Not lint */
   4194 
   4195 #ifndef lint
   4196 /*
   4197  * Print a piece of inquiry data- cleaned up for non-printable characters
   4198  * and stopping at the first space character after the beginning of the
   4199  * passed string;
   4200  */
   4201 
   4202 void
   4203 inq_fill(char *p, int l, char *s)
   4204 {
   4205 	unsigned i = 0;
   4206 	char c;
   4207 
   4208 	while (i++ < l) {
   4209 		if ((c = *p++) < ' ' || c >= 0177) {
   4210 			c = '*';
   4211 		} else if (i != 1 && c == ' ') {
   4212 			break;
   4213 		}
   4214 		*s++ = c;
   4215 	}
   4216 	*s++ = 0;
   4217 }
   4218 #endif /* Not lint */
   4219 
   4220 char *
   4221 dcd_sname(uchar_t status)
   4222 {
   4223 	switch (status & STATUS_ATA_MASK) {
   4224 	case STATUS_GOOD:
   4225 		return ("good status");
   4226 
   4227 	case STATUS_ATA_BUSY:
   4228 		return ("busy");
   4229 
   4230 	default:
   4231 		return ("<unknown status>");
   4232 	}
   4233 }
   4234 
   4235 /* ARGSUSED0 */
   4236 char *
   4237 dcd_rname(int reason)
   4238 {
   4239 	static char *rnames[] = {
   4240 		"cmplt",
   4241 		"incomplete",
   4242 		"dma_derr",
   4243 		"tran_err",
   4244 		"reset",
   4245 		"aborted",
   4246 		"timeout",
   4247 		"data_ovr",
   4248 	};
   4249 	if (reason > CMD_DATA_OVR) {
   4250 		return ("<unknown reason>");
   4251 	} else {
   4252 		return (rnames[reason]);
   4253 	}
   4254 }
   4255 
   4256 
   4257 
   4258 /* ARGSUSED0 */
   4259 int
   4260 dcd_check_wp(dev_t dev)
   4261 {
   4262 
   4263 	return (0);
   4264 }
   4265 
   4266 /*
   4267  * Create device error kstats
   4268  */
   4269 static int
   4270 dcd_create_errstats(struct dcd_disk *un, int instance)
   4271 {
   4272 
   4273 	char kstatname[KSTAT_STRLEN];
   4274 
   4275 	if (un->un_errstats == (kstat_t *)0) {
   4276 		(void) sprintf(kstatname, "dad%d,error", instance);
   4277 		un->un_errstats = kstat_create("daderror", instance, kstatname,
   4278 		    "device_error", KSTAT_TYPE_NAMED,
   4279 		    sizeof (struct dcd_errstats)/ sizeof (kstat_named_t),
   4280 		    KSTAT_FLAG_PERSISTENT);
   4281 
   4282 		if (un->un_errstats) {
   4283 			struct dcd_errstats *dtp;
   4284 
   4285 			dtp = (struct dcd_errstats *)un->un_errstats->ks_data;
   4286 			kstat_named_init(&dtp->dcd_softerrs, "Soft Errors",
   4287 			    KSTAT_DATA_UINT32);
   4288 			kstat_named_init(&dtp->dcd_harderrs, "Hard Errors",
   4289 			    KSTAT_DATA_UINT32);
   4290 			kstat_named_init(&dtp->dcd_transerrs,
   4291 			    "Transport Errors", KSTAT_DATA_UINT32);
   4292 			kstat_named_init(&dtp->dcd_model, "Model",
   4293 			    KSTAT_DATA_CHAR);
   4294 			kstat_named_init(&dtp->dcd_revision, "Revision",
   4295 			    KSTAT_DATA_CHAR);
   4296 			kstat_named_init(&dtp->dcd_serial, "Serial No",
   4297 			    KSTAT_DATA_CHAR);
   4298 			kstat_named_init(&dtp->dcd_capacity, "Size",
   4299 			    KSTAT_DATA_ULONGLONG);
   4300 			kstat_named_init(&dtp->dcd_rq_media_err, "Media Error",
   4301 			    KSTAT_DATA_UINT32);
   4302 			kstat_named_init(&dtp->dcd_rq_ntrdy_err,
   4303 			    "Device Not Ready", KSTAT_DATA_UINT32);
   4304 			kstat_named_init(&dtp->dcd_rq_nodev_err, " No Device",
   4305 			    KSTAT_DATA_UINT32);
   4306 			kstat_named_init(&dtp->dcd_rq_recov_err, "Recoverable",
   4307 			    KSTAT_DATA_UINT32);
   4308 			kstat_named_init(&dtp->dcd_rq_illrq_err,
   4309 			    "Illegal Request", KSTAT_DATA_UINT32);
   4310 
   4311 			un->un_errstats->ks_private = un;
   4312 			un->un_errstats->ks_update = nulldev;
   4313 			kstat_install(un->un_errstats);
   4314 
   4315 			(void) strncpy(&dtp->dcd_model.value.c[0],
   4316 			    un->un_dcd->dcd_ident->dcd_model, 16);
   4317 			(void) strncpy(&dtp->dcd_serial.value.c[0],
   4318 			    un->un_dcd->dcd_ident->dcd_drvser, 16);
   4319 			(void) strncpy(&dtp->dcd_revision.value.c[0],
   4320 			    un->un_dcd->dcd_ident->dcd_fw, 8);
   4321 			dtp->dcd_capacity.value.ui64 =
   4322 			    (uint64_t)((uint64_t)un->un_diskcapacity *
   4323 			    (uint64_t)un->un_lbasize);
   4324 		}
   4325 	}
   4326 	return (0);
   4327 }
   4328 
   4329 
   4330 /*
   4331  * This has been moved from DADA layer as this does not do anything other than
   4332  * retrying the command when it is busy or it does not complete
   4333  */
   4334 int
   4335 dcd_poll(struct dcd_pkt *pkt)
   4336 {
   4337 	int	busy_count, rval = -1, savef;
   4338 	clock_t	savet;
   4339 	void	(*savec)();
   4340 
   4341 
   4342 	/*
   4343 	 * Save old flags
   4344 	 */
   4345 	savef = pkt->pkt_flags;
   4346 	savec = pkt->pkt_comp;
   4347 	savet = pkt->pkt_time;
   4348 
   4349 	pkt->pkt_flags |= FLAG_NOINTR;
   4350 
   4351 
   4352 	/*
   4353 	 * Set the Pkt_comp to NULL
   4354 	 */
   4355 
   4356 	pkt->pkt_comp = 0;
   4357 
   4358 	/*
   4359 	 * Set the Pkt time for the polled command
   4360 	 */
   4361 	if (pkt->pkt_time == 0) {
   4362 		pkt->pkt_time = DCD_POLL_TIMEOUT;
   4363 	}
   4364 
   4365 
   4366 	/* Now transport the command */
   4367 	for (busy_count = 0; busy_count < dcd_poll_busycnt; busy_count++) {
   4368 		if ((rval = dcd_transport(pkt)) == TRAN_ACCEPT) {
   4369 			if (pkt->pkt_reason == CMD_INCOMPLETE &&
   4370 			    pkt->pkt_state == 0) {
   4371 				delay(100);
   4372 			} else if (pkt->pkt_reason  == CMD_CMPLT) {
   4373 				rval = 0;
   4374 				break;
   4375 			}
   4376 		}
   4377 		if (rval == TRAN_BUSY)  {
   4378 			delay(100);
   4379 			continue;
   4380 		}
   4381 	}
   4382 
   4383 	pkt->pkt_flags = savef;
   4384 	pkt->pkt_comp = savec;
   4385 	pkt->pkt_time = savet;
   4386 	return (rval);
   4387 }
   4388 
   4389 
   4390 void
   4391 dcd_translate(struct dadkio_status32 *statp, struct udcd_cmd *cmdp)
   4392 {
   4393 	if (cmdp->udcd_status_reg & STATUS_ATA_BUSY)
   4394 		statp->status = DADKIO_STAT_NOT_READY;
   4395 	else if (cmdp->udcd_status_reg & STATUS_ATA_DWF)
   4396 		statp->status = DADKIO_STAT_HARDWARE_ERROR;
   4397 	else if (cmdp->udcd_status_reg & STATUS_ATA_CORR)
   4398 		statp->status = DADKIO_STAT_SOFT_ERROR;
   4399 	else if (cmdp->udcd_status_reg & STATUS_ATA_ERR) {
   4400 		/*
   4401 		 * The error register is valid only when BSY and DRQ not set
   4402 		 * Assumed that HBA has checked this before it gives the data
   4403 		 */
   4404 		if (cmdp->udcd_error_reg & ERR_AMNF)
   4405 			statp->status = DADKIO_STAT_NOT_FORMATTED;
   4406 		else if (cmdp->udcd_error_reg & ERR_TKONF)
   4407 			statp->status = DADKIO_STAT_NOT_FORMATTED;
   4408 		else if (cmdp->udcd_error_reg & ERR_ABORT)
   4409 			statp->status = DADKIO_STAT_ILLEGAL_REQUEST;
   4410 		else if (cmdp->udcd_error_reg & ERR_IDNF)
   4411 			statp->status = DADKIO_STAT_NOT_FORMATTED;
   4412 		else if (cmdp->udcd_error_reg & ERR_UNC)
   4413 			statp->status = DADKIO_STAT_BUS_ERROR;
   4414 		else if (cmdp->udcd_error_reg & ERR_BBK)
   4415 			statp->status = DADKIO_STAT_MEDIUM_ERROR;
   4416 	} else
   4417 		statp->status = DADKIO_STAT_NO_ERROR;
   4418 }
   4419 
   4420 static void
   4421 dcd_flush_cache(struct dcd_disk *un)
   4422 {
   4423 	struct dcd_pkt *pkt;
   4424 	int retry_count;
   4425 
   4426 
   4427 	if ((pkt = dcd_init_pkt(ROUTE, NULL, NULL,
   4428 	    (uint32_t)sizeof (struct dcd_cmd), 2, PP_LEN,
   4429 	    PKT_CONSISTENT, NULL_FUNC, NULL)) == NULL) {
   4430 		return;
   4431 	}
   4432 
   4433 	makecommand(pkt, 0, ATA_FLUSH_CACHE, 0, ADD_LBA_MODE, 0,
   4434 	    NO_DATA_XFER, 0);
   4435 
   4436 	/*
   4437 	 * Send the command. There are chances it might fail on some
   4438 	 * disks since it is not a mandatory command as per ata-4. Try
   4439 	 * 3 times if it fails. The retry count has been randomly selected.
   4440 	 * There is a need for retry since as per the spec FLUSH CACHE can fail
   4441 	 * as a result of unrecoverable error encountered during execution
   4442 	 * of writing data and subsequent command should continue flushing
   4443 	 * cache.
   4444 	 */
   4445 	for (retry_count = 0; retry_count < 3; retry_count++) {
   4446 		/*
   4447 		 * Set the packet fields.
   4448 		 */
   4449 		pkt->pkt_comp = 0;
   4450 		pkt->pkt_time = DCD_POLL_TIMEOUT;
   4451 		pkt->pkt_flags |= FLAG_FORCENOINTR;
   4452 		pkt->pkt_flags |= FLAG_NOINTR;
   4453 		if (dcd_transport(pkt) == TRAN_ACCEPT) {
   4454 			if (pkt->pkt_reason  == CMD_CMPLT) {
   4455 				break;
   4456 			}
   4457 		}
   4458 		/*
   4459 		 * Note the wait time value of 100ms is same as in the
   4460 		 * dcd_poll routine.
   4461 		 */
   4462 		drv_usecwait(1000000);
   4463 	}
   4464 	(void) dcd_destroy_pkt(pkt);
   4465 }
   4466 
   4467 static int
   4468 dcd_send_lb_rw_cmd(dev_info_t *devi, void *bufaddr,
   4469     diskaddr_t start_block, size_t reqlength, uchar_t cmd)
   4470 {
   4471 	struct dcd_pkt *pkt;
   4472 	struct buf *bp;
   4473 	diskaddr_t real_addr = start_block;
   4474 	size_t buffer_size = reqlength;
   4475 	uchar_t command, tmp;
   4476 	int i, rval = 0;
   4477 	struct dcd_disk *un;
   4478 
   4479 	un = ddi_get_soft_state(dcd_state, ddi_get_instance(devi));
   4480 	if (un == NULL)
   4481 		return (ENXIO);
   4482 
   4483 	bp = dcd_alloc_consistent_buf(ROUTE, (struct buf *)NULL,
   4484 	    buffer_size, B_READ, NULL_FUNC, NULL);
   4485 	if (!bp) {
   4486 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   4487 		    "no bp for disk label\n");
   4488 		return (ENOMEM);
   4489 	}
   4490 
   4491 	pkt = dcd_init_pkt(ROUTE, (struct dcd_pkt *)NULL,
   4492 	    bp, (uint32_t)sizeof (struct dcd_cmd), 2, PP_LEN,
   4493 	    PKT_CONSISTENT, NULL_FUNC, NULL);
   4494 
   4495 	if (!pkt) {
   4496 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   4497 		    "no memory for disk label\n");
   4498 		dcd_free_consistent_buf(bp);
   4499 		return (ENOMEM);
   4500 	}
   4501 
   4502 	if (cmd == TG_READ) {
   4503 		bzero(bp->b_un.b_addr, buffer_size);
   4504 		tmp = DATA_READ;
   4505 	} else {
   4506 		bcopy((caddr_t)bufaddr, bp->b_un.b_addr, buffer_size);
   4507 		tmp = DATA_WRITE;
   4508 	}
   4509 
   4510 	mutex_enter(DCD_MUTEX);
   4511 	if ((un->un_dp->options & DMA_SUPPORTTED) == DMA_SUPPORTTED) {
   4512 		if (cmd == TG_READ) {
   4513 			command = ATA_READ_DMA;
   4514 		} else {
   4515 			command = ATA_WRITE_DMA;
   4516 		}
   4517 	} else {
   4518 		if (cmd == TG_READ) {
   4519 			if (un->un_dp->options & BLOCK_MODE)
   4520 				command = ATA_READ_MULTIPLE;
   4521 			else
   4522 				command = ATA_READ;
   4523 		} else {
   4524 			if (un->un_dp->options & BLOCK_MODE)
   4525 				command = ATA_READ_MULTIPLE;
   4526 			else
   4527 				command = ATA_WRITE;
   4528 		}
   4529 	}
   4530 	mutex_exit(DCD_MUTEX);
   4531 	(void) makecommand(pkt, 0, command, real_addr, ADD_LBA_MODE,
   4532 	    buffer_size, tmp, 0);
   4533 
   4534 	for (i = 0; i < 3; i++) {
   4535 		if (dcd_poll(pkt) || SCBP_C(pkt) != STATUS_GOOD ||
   4536 		    (pkt->pkt_state & STATE_XFERRED_DATA) == 0 ||
   4537 		    (pkt->pkt_resid != 0)) {
   4538 			DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   4539 			    "Status %x, state %x, resid %lx\n",
   4540 			    SCBP_C(pkt), pkt->pkt_state, pkt->pkt_resid);
   4541 			rval = EIO;
   4542 		} else {
   4543 			break;
   4544 		}
   4545 	}
   4546 
   4547 	if (rval != 0) {
   4548 		dcd_destroy_pkt(pkt);
   4549 		dcd_free_consistent_buf(bp);
   4550 		return (EIO);
   4551 	}
   4552 
   4553 	if (cmd == TG_READ) {
   4554 		bcopy(bp->b_un.b_addr, bufaddr, reqlength);
   4555 		rval = 0;
   4556 	}
   4557 
   4558 	dcd_destroy_pkt(pkt);
   4559 	dcd_free_consistent_buf(bp);
   4560 	return (rval);
   4561 }
   4562 
   4563 static int dcd_compute_dk_capacity(struct dcd_device *devp,
   4564     diskaddr_t *capacity)
   4565 {
   4566 	diskaddr_t cap;
   4567 	diskaddr_t no_of_lbasec;
   4568 
   4569 	cap = devp->dcd_ident->dcd_fixcyls *
   4570 	    devp->dcd_ident->dcd_heads *
   4571 	    devp->dcd_ident->dcd_sectors;
   4572 	no_of_lbasec = devp->dcd_ident->dcd_addrsec[1];
   4573 	no_of_lbasec = no_of_lbasec << 16;
   4574 	no_of_lbasec = no_of_lbasec | devp->dcd_ident->dcd_addrsec[0];
   4575 
   4576 	if (no_of_lbasec > cap) {
   4577 		cap = no_of_lbasec;
   4578 	}
   4579 
   4580 	if (cap != ((uint32_t)-1))
   4581 		*capacity = cap;
   4582 	else
   4583 		return (EINVAL);
   4584 	return (0);
   4585 }
   4586 
   4587 /*ARGSUSED5*/
   4588 static int
   4589 dcd_lb_rdwr(dev_info_t *devi, uchar_t cmd, void *bufaddr,
   4590     diskaddr_t start_block, size_t reqlength, void *tg_cookie)
   4591 {
   4592 	if (cmd != TG_READ && cmd != TG_WRITE)
   4593 		return (EINVAL);
   4594 
   4595 	return (dcd_send_lb_rw_cmd(devi, bufaddr, start_block,
   4596 	    reqlength, cmd));
   4597 }
   4598 
   4599 static int
   4600 dcd_lb_getphygeom(dev_info_t *devi, cmlb_geom_t *phygeomp)
   4601 {
   4602 	struct dcd_device *devp;
   4603 	uint32_t no_of_lbasec, capacity, calculated_cylinders;
   4604 
   4605 	devp = ddi_get_driver_private(devi);
   4606 
   4607 	if ((devp->dcd_ident->dcd_config & ATAPI_DEVICE) == 0) {
   4608 		if (devp->dcd_ident->dcd_config & ATANON_REMOVABLE) {
   4609 			phygeomp->g_ncyl = devp->dcd_ident->dcd_fixcyls - 2;
   4610 			phygeomp->g_acyl = 2;
   4611 			phygeomp->g_nhead = devp->dcd_ident->dcd_heads;
   4612 			phygeomp->g_nsect = devp->dcd_ident->dcd_sectors;
   4613 
   4614 			no_of_lbasec = devp->dcd_ident->dcd_addrsec[1];
   4615 			no_of_lbasec = no_of_lbasec << 16;
   4616 			no_of_lbasec = no_of_lbasec |
   4617 			    devp->dcd_ident->dcd_addrsec[0];
   4618 			capacity = devp->dcd_ident->dcd_fixcyls *
   4619 			    devp->dcd_ident->dcd_heads *
   4620 			    devp->dcd_ident->dcd_sectors;
   4621 			if (no_of_lbasec > capacity) {
   4622 				capacity = no_of_lbasec;
   4623 				if (capacity > NUM_SECTORS_32G) {
   4624 					/*
   4625 					 * if the capacity is greater than 32G,
   4626 					 * then 255 is the sectors per track.
   4627 					 * This should be good until 128G disk
   4628 					 * capacity, which is the current ATA-4
   4629 					 * limitation.
   4630 					 */
   4631 					phygeomp->g_nsect = 255;
   4632 				}
   4633 
   4634 				/*
   4635 				 * If the disk capacity is >= 128GB then no. of
   4636 				 * addressable sectors will be set to 0xfffffff
   4637 				 * in the IDENTIFY info. In that case set the
   4638 				 *  no. of pcyl to the Max. 16bit value.
   4639 				 */
   4640 
   4641 				calculated_cylinders = (capacity) /
   4642 				    (phygeomp->g_nhead * phygeomp->g_nsect);
   4643 				if (calculated_cylinders >= USHRT_MAX) {
   4644 					phygeomp->g_ncyl = USHRT_MAX - 2;
   4645 				} else {
   4646 					phygeomp->g_ncyl =
   4647 					    calculated_cylinders - 2;
   4648 				}
   4649 			}
   4650 
   4651 			phygeomp->g_capacity = capacity;
   4652 			phygeomp->g_intrlv = 0;
   4653 			phygeomp->g_rpm = 5400;
   4654 			phygeomp->g_secsize = devp->dcd_ident->dcd_secsiz;
   4655 
   4656 			return (0);
   4657 		} else
   4658 			return (ENOTSUP);
   4659 	} else {
   4660 		return (EINVAL);
   4661 	}
   4662 }
   4663 
   4664 
   4665 /*ARGSUSED3*/
   4666 static int
   4667 dcd_lb_getinfo(dev_info_t *devi, int cmd,  void *arg, void *tg_cookie)
   4668 {
   4669 	struct dcd_disk *un;
   4670 
   4671 	un = ddi_get_soft_state(dcd_state, ddi_get_instance(devi));
   4672 
   4673 	if (un == NULL)
   4674 		return (ENXIO);
   4675 
   4676 	switch (cmd) {
   4677 	case TG_GETPHYGEOM:
   4678 		return (dcd_lb_getphygeom(devi, (cmlb_geom_t *)arg));
   4679 
   4680 	case TG_GETVIRTGEOM:
   4681 		return (-1);
   4682 
   4683 	case TG_GETCAPACITY:
   4684 	case TG_GETBLOCKSIZE:
   4685 		mutex_enter(DCD_MUTEX);
   4686 		if (un->un_diskcapacity <= 0) {
   4687 			mutex_exit(DCD_MUTEX);
   4688 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
   4689 			    "invalid disk capacity\n");
   4690 			return (EIO);
   4691 		}
   4692 		if (cmd == TG_GETCAPACITY)
   4693 			*(diskaddr_t *)arg = un->un_diskcapacity;
   4694 		else
   4695 			*(uint32_t *)arg = DEV_BSIZE;
   4696 
   4697 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "capacity %x\n",
   4698 		    un->un_diskcapacity);
   4699 		mutex_exit(DCD_MUTEX);
   4700 		return (0);
   4701 
   4702 	case TG_GETATTR:
   4703 		mutex_enter(DCD_MUTEX);
   4704 		*(tg_attribute_t *)arg = un->un_tgattribute;
   4705 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
   4706 		    "media_is_writable %x\n",
   4707 		    un->un_tgattribute.media_is_writable);
   4708 		mutex_exit(DCD_MUTEX);
   4709 		return (0);
   4710 	default:
   4711 		return (ENOTTY);
   4712 	}
   4713 }
   4714