1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2010 Emulex. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 28 #define DEF_ICFG 1 29 30 #include <emlxs.h> 31 #include <emlxs_version.h> 32 33 34 char emlxs_revision[] = EMLXS_REVISION; 35 char emlxs_version[] = EMLXS_VERSION; 36 char emlxs_name[] = EMLXS_NAME; 37 char emlxs_label[] = EMLXS_LABEL; 38 39 /* Required for EMLXS_CONTEXT in EMLXS_MSGF calls */ 40 EMLXS_MSG_DEF(EMLXS_SOLARIS_C); 41 42 #ifdef MENLO_SUPPORT 43 static int32_t emlxs_send_menlo(emlxs_port_t *port, emlxs_buf_t *sbp); 44 #endif /* MENLO_SUPPORT */ 45 46 static void emlxs_fca_attach(emlxs_hba_t *hba); 47 static void emlxs_fca_detach(emlxs_hba_t *hba); 48 static void emlxs_drv_banner(emlxs_hba_t *hba); 49 50 static int32_t emlxs_get_props(emlxs_hba_t *hba); 51 static int32_t emlxs_send_fcp_cmd(emlxs_port_t *port, emlxs_buf_t *sbp); 52 static int32_t emlxs_send_fct_status(emlxs_port_t *port, emlxs_buf_t *sbp); 53 static int32_t emlxs_send_fct_abort(emlxs_port_t *port, emlxs_buf_t *sbp); 54 static int32_t emlxs_send_ip(emlxs_port_t *port, emlxs_buf_t *sbp); 55 static int32_t emlxs_send_els(emlxs_port_t *port, emlxs_buf_t *sbp); 56 static int32_t emlxs_send_els_rsp(emlxs_port_t *port, emlxs_buf_t *sbp); 57 static int32_t emlxs_send_ct(emlxs_port_t *port, emlxs_buf_t *sbp); 58 static int32_t emlxs_send_ct_rsp(emlxs_port_t *port, emlxs_buf_t *sbp); 59 static uint32_t emlxs_add_instance(int32_t ddiinst); 60 static void emlxs_iodone(emlxs_buf_t *sbp); 61 static int emlxs_pm_lower_power(dev_info_t *dip); 62 static int emlxs_pm_raise_power(dev_info_t *dip); 63 static void emlxs_driver_remove(dev_info_t *dip, uint32_t init_flag, 64 uint32_t failed); 65 static void emlxs_iodone_server(void *arg1, void *arg2, void *arg3); 66 static uint32_t emlxs_integrity_check(emlxs_hba_t *hba); 67 static uint32_t emlxs_test(emlxs_hba_t *hba, uint32_t test_code, 68 uint32_t args, uint32_t *arg); 69 70 static void emlxs_read_vport_prop(emlxs_hba_t *hba); 71 72 73 74 /* 75 * Driver Entry Routines. 76 */ 77 static int32_t emlxs_detach(dev_info_t *, ddi_detach_cmd_t); 78 static int32_t emlxs_attach(dev_info_t *, ddi_attach_cmd_t); 79 static int32_t emlxs_open(dev_t *, int32_t, int32_t, cred_t *); 80 static int32_t emlxs_close(dev_t, int32_t, int32_t, cred_t *); 81 static int32_t emlxs_ioctl(dev_t, int32_t, intptr_t, int32_t, 82 cred_t *, int32_t *); 83 static int32_t emlxs_info(dev_info_t *, ddi_info_cmd_t, void *, void **); 84 85 86 /* 87 * FC_AL Transport Functions. 88 */ 89 static opaque_t emlxs_bind_port(dev_info_t *, fc_fca_port_info_t *, 90 fc_fca_bind_info_t *); 91 static void emlxs_unbind_port(opaque_t); 92 static void emlxs_initialize_pkt(emlxs_port_t *, emlxs_buf_t *); 93 static int32_t emlxs_get_cap(opaque_t, char *, void *); 94 static int32_t emlxs_set_cap(opaque_t, char *, void *); 95 static int32_t emlxs_get_map(opaque_t, fc_lilpmap_t *); 96 static int32_t emlxs_ub_alloc(opaque_t, uint64_t *, uint32_t, 97 uint32_t *, uint32_t); 98 static int32_t emlxs_ub_free(opaque_t, uint32_t, uint64_t *); 99 100 static opaque_t emlxs_get_device(opaque_t, fc_portid_t); 101 static int32_t emlxs_notify(opaque_t, uint32_t); 102 static void emlxs_ub_els_reject(emlxs_port_t *, fc_unsol_buf_t *); 103 104 /* 105 * Driver Internal Functions. 106 */ 107 108 static void emlxs_poll(emlxs_port_t *, emlxs_buf_t *); 109 static int32_t emlxs_power(dev_info_t *, int32_t, int32_t); 110 #ifdef EMLXS_I386 111 #ifdef S11 112 static int32_t emlxs_quiesce(dev_info_t *); 113 #endif 114 #endif 115 static int32_t emlxs_hba_resume(dev_info_t *); 116 static int32_t emlxs_hba_suspend(dev_info_t *); 117 static int32_t emlxs_hba_detach(dev_info_t *); 118 static int32_t emlxs_hba_attach(dev_info_t *); 119 static void emlxs_lock_destroy(emlxs_hba_t *); 120 static void emlxs_lock_init(emlxs_hba_t *); 121 static ULP_BDE64 *emlxs_pkt_to_bpl(ULP_BDE64 *, fc_packet_t *, 122 uint32_t, uint8_t); 123 124 char *emlxs_pm_components[] = { 125 "NAME=emlxx000", 126 "0=Device D3 State", 127 "1=Device D0 State" 128 }; 129 130 131 /* 132 * Default emlx dma limits 133 */ 134 ddi_dma_lim_t emlxs_dma_lim = { 135 (uint32_t)0, /* dlim_addr_lo */ 136 (uint32_t)0xffffffff, /* dlim_addr_hi */ 137 (uint_t)0x00ffffff, /* dlim_cntr_max */ 138 DEFAULT_BURSTSIZE | BURST32 | BURST64, /* dlim_burstsizes */ 139 1, /* dlim_minxfer */ 140 0x00ffffff /* dlim_dmaspeed */ 141 }; 142 143 /* 144 * Be careful when using these attributes; the defaults listed below are 145 * (almost) the most general case, permitting allocation in almost any 146 * way supported by the LightPulse family. The sole exception is the 147 * alignment specified as requiring memory allocation on a 4-byte boundary; 148 * the Lightpulse can DMA memory on any byte boundary. 149 * 150 * The LightPulse family currently is limited to 16M transfers; 151 * this restriction affects the dma_attr_count_max and dma_attr_maxxfer fields. 152 */ 153 ddi_dma_attr_t emlxs_dma_attr = { 154 DMA_ATTR_V0, /* dma_attr_version */ 155 (uint64_t)0, /* dma_attr_addr_lo */ 156 (uint64_t)0xffffffffffffffff, /* dma_attr_addr_hi */ 157 (uint64_t)0x00ffffff, /* dma_attr_count_max */ 158 1, /* dma_attr_align */ 159 DEFAULT_BURSTSIZE | BURST32 | BURST64, /* dma_attr_burstsizes */ 160 1, /* dma_attr_minxfer */ 161 (uint64_t)0x00ffffff, /* dma_attr_maxxfer */ 162 (uint64_t)0xffffffff, /* dma_attr_seg */ 163 EMLXS_SGLLEN, /* dma_attr_sgllen */ 164 1, /* dma_attr_granular */ 165 0 /* dma_attr_flags */ 166 }; 167 168 ddi_dma_attr_t emlxs_dma_attr_ro = { 169 DMA_ATTR_V0, /* dma_attr_version */ 170 (uint64_t)0, /* dma_attr_addr_lo */ 171 (uint64_t)0xffffffffffffffff, /* dma_attr_addr_hi */ 172 (uint64_t)0x00ffffff, /* dma_attr_count_max */ 173 1, /* dma_attr_align */ 174 DEFAULT_BURSTSIZE | BURST32 | BURST64, /* dma_attr_burstsizes */ 175 1, /* dma_attr_minxfer */ 176 (uint64_t)0x00ffffff, /* dma_attr_maxxfer */ 177 (uint64_t)0xffffffff, /* dma_attr_seg */ 178 EMLXS_SGLLEN, /* dma_attr_sgllen */ 179 1, /* dma_attr_granular */ 180 DDI_DMA_RELAXED_ORDERING /* dma_attr_flags */ 181 }; 182 183 ddi_dma_attr_t emlxs_dma_attr_1sg = { 184 DMA_ATTR_V0, /* dma_attr_version */ 185 (uint64_t)0, /* dma_attr_addr_lo */ 186 (uint64_t)0xffffffffffffffff, /* dma_attr_addr_hi */ 187 (uint64_t)0x00ffffff, /* dma_attr_count_max */ 188 1, /* dma_attr_align */ 189 DEFAULT_BURSTSIZE | BURST32 | BURST64, /* dma_attr_burstsizes */ 190 1, /* dma_attr_minxfer */ 191 (uint64_t)0x00ffffff, /* dma_attr_maxxfer */ 192 (uint64_t)0xffffffff, /* dma_attr_seg */ 193 1, /* dma_attr_sgllen */ 194 1, /* dma_attr_granular */ 195 0 /* dma_attr_flags */ 196 }; 197 198 #if (EMLXS_MODREV >= EMLXS_MODREV3) 199 ddi_dma_attr_t emlxs_dma_attr_fcip_rsp = { 200 DMA_ATTR_V0, /* dma_attr_version */ 201 (uint64_t)0, /* dma_attr_addr_lo */ 202 (uint64_t)0xffffffffffffffff, /* dma_attr_addr_hi */ 203 (uint64_t)0x00ffffff, /* dma_attr_count_max */ 204 1, /* dma_attr_align */ 205 DEFAULT_BURSTSIZE | BURST32 | BURST64, /* dma_attr_burstsizes */ 206 1, /* dma_attr_minxfer */ 207 (uint64_t)0x00ffffff, /* dma_attr_maxxfer */ 208 (uint64_t)0xffffffff, /* dma_attr_seg */ 209 EMLXS_SGLLEN, /* dma_attr_sgllen */ 210 1, /* dma_attr_granular */ 211 0 /* dma_attr_flags */ 212 }; 213 #endif /* >= EMLXS_MODREV3 */ 214 215 /* 216 * DDI access attributes for device 217 */ 218 ddi_device_acc_attr_t emlxs_dev_acc_attr = { 219 DDI_DEVICE_ATTR_V1, /* devacc_attr_version */ 220 DDI_STRUCTURE_LE_ACC, /* PCI is Little Endian */ 221 DDI_STRICTORDER_ACC, /* devacc_attr_dataorder */ 222 DDI_DEFAULT_ACC /* devacc_attr_access */ 223 }; 224 225 /* 226 * DDI access attributes for data 227 */ 228 ddi_device_acc_attr_t emlxs_data_acc_attr = { 229 DDI_DEVICE_ATTR_V1, /* devacc_attr_version */ 230 DDI_NEVERSWAP_ACC, /* don't swap for Data */ 231 DDI_STRICTORDER_ACC, /* devacc_attr_dataorder */ 232 DDI_DEFAULT_ACC /* devacc_attr_access */ 233 }; 234 235 /* 236 * Fill in the FC Transport structure, 237 * as defined in the Fibre Channel Transport Programmming Guide. 238 */ 239 #if (EMLXS_MODREV == EMLXS_MODREV5) 240 static fc_fca_tran_t emlxs_fca_tran = { 241 FCTL_FCA_MODREV_5, /* fca_version, with SUN NPIV support */ 242 MAX_VPORTS, /* fca numerb of ports */ 243 sizeof (emlxs_buf_t), /* fca pkt size */ 244 2048, /* fca cmd max */ 245 &emlxs_dma_lim, /* fca dma limits */ 246 0, /* fca iblock, to be filled in later */ 247 &emlxs_dma_attr, /* fca dma attributes */ 248 &emlxs_dma_attr_1sg, /* fca dma fcp cmd attributes */ 249 &emlxs_dma_attr_1sg, /* fca dma fcp rsp attributes */ 250 &emlxs_dma_attr_ro, /* fca dma fcp data attributes */ 251 &emlxs_dma_attr_1sg, /* fca dma fcip cmd attributes */ 252 &emlxs_dma_attr_fcip_rsp, /* fca dma fcip rsp attributes */ 253 &emlxs_dma_attr_1sg, /* fca dma fcsm cmd attributes */ 254 &emlxs_dma_attr, /* fca dma fcsm rsp attributes */ 255 &emlxs_data_acc_attr, /* fca access atributes */ 256 0, /* fca_num_npivports */ 257 {0, 0, 0, 0, 0, 0, 0, 0}, /* Physical port WWPN */ 258 emlxs_bind_port, 259 emlxs_unbind_port, 260 emlxs_pkt_init, 261 emlxs_pkt_uninit, 262 emlxs_transport, 263 emlxs_get_cap, 264 emlxs_set_cap, 265 emlxs_get_map, 266 emlxs_transport, 267 emlxs_ub_alloc, 268 emlxs_ub_free, 269 emlxs_ub_release, 270 emlxs_pkt_abort, 271 emlxs_reset, 272 emlxs_port_manage, 273 emlxs_get_device, 274 emlxs_notify 275 }; 276 #endif /* EMLXS_MODREV5 */ 277 278 279 #if (EMLXS_MODREV == EMLXS_MODREV4) 280 static fc_fca_tran_t emlxs_fca_tran = { 281 FCTL_FCA_MODREV_4, /* fca_version */ 282 MAX_VPORTS, /* fca numerb of ports */ 283 sizeof (emlxs_buf_t), /* fca pkt size */ 284 2048, /* fca cmd max */ 285 &emlxs_dma_lim, /* fca dma limits */ 286 0, /* fca iblock, to be filled in later */ 287 &emlxs_dma_attr, /* fca dma attributes */ 288 &emlxs_dma_attr_1sg, /* fca dma fcp cmd attributes */ 289 &emlxs_dma_attr_1sg, /* fca dma fcp rsp attributes */ 290 &emlxs_dma_attr_ro, /* fca dma fcp data attributes */ 291 &emlxs_dma_attr_1sg, /* fca dma fcip cmd attributes */ 292 &emlxs_dma_attr_fcip_rsp, /* fca dma fcip rsp attributes */ 293 &emlxs_dma_attr_1sg, /* fca dma fcsm cmd attributes */ 294 &emlxs_dma_attr, /* fca dma fcsm rsp attributes */ 295 &emlxs_data_acc_attr, /* fca access atributes */ 296 emlxs_bind_port, 297 emlxs_unbind_port, 298 emlxs_pkt_init, 299 emlxs_pkt_uninit, 300 emlxs_transport, 301 emlxs_get_cap, 302 emlxs_set_cap, 303 emlxs_get_map, 304 emlxs_transport, 305 emlxs_ub_alloc, 306 emlxs_ub_free, 307 emlxs_ub_release, 308 emlxs_pkt_abort, 309 emlxs_reset, 310 emlxs_port_manage, 311 emlxs_get_device, 312 emlxs_notify 313 }; 314 #endif /* EMLXS_MODEREV4 */ 315 316 317 #if (EMLXS_MODREV == EMLXS_MODREV3) 318 static fc_fca_tran_t emlxs_fca_tran = { 319 FCTL_FCA_MODREV_3, /* fca_version */ 320 MAX_VPORTS, /* fca numerb of ports */ 321 sizeof (emlxs_buf_t), /* fca pkt size */ 322 2048, /* fca cmd max */ 323 &emlxs_dma_lim, /* fca dma limits */ 324 0, /* fca iblock, to be filled in later */ 325 &emlxs_dma_attr, /* fca dma attributes */ 326 &emlxs_dma_attr_1sg, /* fca dma fcp cmd attributes */ 327 &emlxs_dma_attr_1sg, /* fca dma fcp rsp attributes */ 328 &emlxs_dma_attr_ro, /* fca dma fcp data attributes */ 329 &emlxs_dma_attr_1sg, /* fca dma fcip cmd attributes */ 330 &emlxs_dma_attr_fcip_rsp, /* fca dma fcip rsp attributes */ 331 &emlxs_dma_attr_1sg, /* fca dma fcsm cmd attributes */ 332 &emlxs_dma_attr, /* fca dma fcsm rsp attributes */ 333 &emlxs_data_acc_attr, /* fca access atributes */ 334 emlxs_bind_port, 335 emlxs_unbind_port, 336 emlxs_pkt_init, 337 emlxs_pkt_uninit, 338 emlxs_transport, 339 emlxs_get_cap, 340 emlxs_set_cap, 341 emlxs_get_map, 342 emlxs_transport, 343 emlxs_ub_alloc, 344 emlxs_ub_free, 345 emlxs_ub_release, 346 emlxs_pkt_abort, 347 emlxs_reset, 348 emlxs_port_manage, 349 emlxs_get_device, 350 emlxs_notify 351 }; 352 #endif /* EMLXS_MODREV3 */ 353 354 355 #if (EMLXS_MODREV == EMLXS_MODREV2) 356 static fc_fca_tran_t emlxs_fca_tran = { 357 FCTL_FCA_MODREV_2, /* fca_version */ 358 MAX_VPORTS, /* number of ports */ 359 sizeof (emlxs_buf_t), /* pkt size */ 360 2048, /* max cmds */ 361 &emlxs_dma_lim, /* DMA limits */ 362 0, /* iblock, to be filled in later */ 363 &emlxs_dma_attr, /* dma attributes */ 364 &emlxs_data_acc_attr, /* access atributes */ 365 emlxs_bind_port, 366 emlxs_unbind_port, 367 emlxs_pkt_init, 368 emlxs_pkt_uninit, 369 emlxs_transport, 370 emlxs_get_cap, 371 emlxs_set_cap, 372 emlxs_get_map, 373 emlxs_transport, 374 emlxs_ub_alloc, 375 emlxs_ub_free, 376 emlxs_ub_release, 377 emlxs_pkt_abort, 378 emlxs_reset, 379 emlxs_port_manage, 380 emlxs_get_device, 381 emlxs_notify 382 }; 383 #endif /* EMLXS_MODREV2 */ 384 385 /* 386 * This is needed when the module gets loaded by the kernel 387 * so ddi library calls get resolved. 388 */ 389 #ifndef MODSYM_SUPPORT 390 char _depends_on[] = "misc/fctl"; 391 #endif /* MODSYM_SUPPORT */ 392 393 /* 394 * state pointer which the implementation uses as a place to 395 * hang a set of per-driver structures; 396 * 397 */ 398 void *emlxs_soft_state = NULL; 399 400 /* 401 * Driver Global variables. 402 */ 403 int32_t emlxs_scsi_reset_delay = 3000; /* milliseconds */ 404 405 emlxs_device_t emlxs_device; 406 407 uint32_t emlxs_instance[MAX_FC_BRDS]; /* uses emlxs_device.lock */ 408 uint32_t emlxs_instance_count = 0; /* uses emlxs_device.lock */ 409 410 411 /* 412 * Single private "global" lock used to gain access to 413 * the hba_list and/or any other case where we want need to be 414 * single-threaded. 415 */ 416 uint32_t emlxs_diag_state; 417 418 /* 419 * CB ops vector. Used for administration only. 420 */ 421 static struct cb_ops emlxs_cb_ops = { 422 emlxs_open, /* cb_open */ 423 emlxs_close, /* cb_close */ 424 nodev, /* cb_strategy */ 425 nodev, /* cb_print */ 426 nodev, /* cb_dump */ 427 nodev, /* cb_read */ 428 nodev, /* cb_write */ 429 emlxs_ioctl, /* cb_ioctl */ 430 nodev, /* cb_devmap */ 431 nodev, /* cb_mmap */ 432 nodev, /* cb_segmap */ 433 nochpoll, /* cb_chpoll */ 434 ddi_prop_op, /* cb_prop_op */ 435 0, /* cb_stream */ 436 #ifdef _LP64 437 D_64BIT | D_HOTPLUG | D_MP | D_NEW, /* cb_flag */ 438 #else 439 D_HOTPLUG | D_MP | D_NEW, /* cb_flag */ 440 #endif 441 CB_REV, /* rev */ 442 nodev, /* cb_aread */ 443 nodev /* cb_awrite */ 444 }; 445 446 static struct dev_ops emlxs_ops = { 447 DEVO_REV, /* rev */ 448 0, /* refcnt */ 449 emlxs_info, /* getinfo */ 450 nulldev, /* identify */ 451 nulldev, /* probe */ 452 emlxs_attach, /* attach */ 453 emlxs_detach, /* detach */ 454 nodev, /* reset */ 455 &emlxs_cb_ops, /* devo_cb_ops */ 456 NULL, /* devo_bus_ops */ 457 emlxs_power, /* power ops */ 458 #ifdef EMLXS_I386 459 #ifdef S11 460 emlxs_quiesce, /* quiesce */ 461 #endif 462 #endif 463 }; 464 465 #include <sys/modctl.h> 466 extern struct mod_ops mod_driverops; 467 468 #ifdef SAN_DIAG_SUPPORT 469 extern kmutex_t sd_bucket_mutex; 470 extern sd_bucket_info_t sd_bucket; 471 #endif /* SAN_DIAG_SUPPORT */ 472 473 /* 474 * Module linkage information for the kernel. 475 */ 476 static struct modldrv emlxs_modldrv = { 477 &mod_driverops, /* module type - driver */ 478 emlxs_name, /* module name */ 479 &emlxs_ops, /* driver ops */ 480 }; 481 482 483 /* 484 * Driver module linkage structure 485 */ 486 static struct modlinkage emlxs_modlinkage = { 487 MODREV_1, /* ml_rev - must be MODREV_1 */ 488 &emlxs_modldrv, /* ml_linkage */ 489 NULL /* end of driver linkage */ 490 }; 491 492 493 /* We only need to add entries for non-default return codes. */ 494 /* Entries do not need to be in order. */ 495 /* Default: FC_PKT_TRAN_ERROR, FC_REASON_ABORTED, */ 496 /* FC_EXPLN_NONE, FC_ACTION_RETRYABLE */ 497 498 emlxs_xlat_err_t emlxs_iostat_tbl[] = { 499 /* {f/w code, pkt_state, pkt_reason, */ 500 /* pkt_expln, pkt_action} */ 501 502 /* 0x00 - Do not remove */ 503 {IOSTAT_SUCCESS, FC_PKT_SUCCESS, FC_REASON_NONE, 504 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 505 506 /* 0x01 - Do not remove */ 507 {IOSTAT_FCP_RSP_ERROR, FC_PKT_SUCCESS, FC_REASON_NONE, 508 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 509 510 /* 0x02 */ 511 {IOSTAT_REMOTE_STOP, FC_PKT_REMOTE_STOP, FC_REASON_ABTS, 512 FC_EXPLN_NONE, FC_ACTION_NON_RETRYABLE}, 513 514 /* 515 * This is a default entry. 516 * The real codes are written dynamically in emlxs_els.c 517 */ 518 /* 0x09 */ 519 {IOSTAT_LS_RJT, FC_PKT_LS_RJT, FC_REASON_CMD_UNABLE, 520 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 521 522 /* Special error code */ 523 /* 0x10 */ 524 {IOSTAT_DATA_OVERRUN, FC_PKT_TRAN_ERROR, FC_REASON_OVERRUN, 525 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 526 527 /* Special error code */ 528 /* 0x11 */ 529 {IOSTAT_DATA_UNDERRUN, FC_PKT_TRAN_ERROR, FC_REASON_ABORTED, 530 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 531 532 /* CLASS 2 only */ 533 /* 0x04 */ 534 {IOSTAT_NPORT_RJT, FC_PKT_NPORT_RJT, FC_REASON_PROTOCOL_ERROR, 535 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 536 537 /* CLASS 2 only */ 538 /* 0x05 */ 539 {IOSTAT_FABRIC_RJT, FC_PKT_FABRIC_RJT, FC_REASON_PROTOCOL_ERROR, 540 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 541 542 /* CLASS 2 only */ 543 /* 0x06 */ 544 {IOSTAT_NPORT_BSY, FC_PKT_NPORT_BSY, FC_REASON_PHYSICAL_BUSY, 545 FC_EXPLN_NONE, FC_ACTION_SEQ_TERM_RETRY}, 546 547 /* CLASS 2 only */ 548 /* 0x07 */ 549 {IOSTAT_FABRIC_BSY, FC_PKT_FABRIC_BSY, FC_REASON_FABRIC_BSY, 550 FC_EXPLN_NONE, FC_ACTION_SEQ_TERM_RETRY}, 551 }; 552 553 #define IOSTAT_MAX (sizeof (emlxs_iostat_tbl)/sizeof (emlxs_xlat_err_t)) 554 555 556 /* We only need to add entries for non-default return codes. */ 557 /* Entries do not need to be in order. */ 558 /* Default: FC_PKT_TRAN_ERROR, FC_REASON_ABORTED, */ 559 /* FC_EXPLN_NONE, FC_ACTION_RETRYABLE} */ 560 561 emlxs_xlat_err_t emlxs_ioerr_tbl[] = { 562 /* {f/w code, pkt_state, pkt_reason, */ 563 /* pkt_expln, pkt_action} */ 564 565 /* 0x01 */ 566 {IOERR_MISSING_CONTINUE, FC_PKT_TRAN_ERROR, FC_REASON_OVERRUN, 567 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 568 569 /* 0x02 */ 570 {IOERR_SEQUENCE_TIMEOUT, FC_PKT_TIMEOUT, FC_REASON_SEQ_TIMEOUT, 571 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 572 573 /* 0x04 */ 574 {IOERR_INVALID_RPI, FC_PKT_PORT_OFFLINE, FC_REASON_OFFLINE, 575 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 576 577 /* 0x05 */ 578 {IOERR_NO_XRI, FC_PKT_LOCAL_RJT, FC_REASON_XCHG_DROPPED, 579 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 580 581 /* 0x06 */ 582 {IOERR_ILLEGAL_COMMAND, FC_PKT_LOCAL_RJT, FC_REASON_ILLEGAL_REQ, 583 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 584 585 /* 0x07 */ 586 {IOERR_XCHG_DROPPED, FC_PKT_LOCAL_RJT, FC_REASON_XCHG_DROPPED, 587 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 588 589 /* 0x08 */ 590 {IOERR_ILLEGAL_FIELD, FC_PKT_LOCAL_RJT, FC_REASON_ILLEGAL_REQ, 591 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 592 593 /* 0x0B */ 594 {IOERR_RCV_BUFFER_WAITING, FC_PKT_LOCAL_RJT, FC_REASON_NOMEM, 595 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 596 597 /* 0x0D */ 598 {IOERR_TX_DMA_FAILED, FC_PKT_LOCAL_RJT, FC_REASON_DMA_ERROR, 599 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 600 601 /* 0x0E */ 602 {IOERR_RX_DMA_FAILED, FC_PKT_LOCAL_RJT, FC_REASON_DMA_ERROR, 603 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 604 605 /* 0x0F */ 606 {IOERR_ILLEGAL_FRAME, FC_PKT_LOCAL_RJT, FC_REASON_ILLEGAL_FRAME, 607 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 608 609 /* 0x11 */ 610 {IOERR_NO_RESOURCES, FC_PKT_LOCAL_RJT, FC_REASON_NOMEM, 611 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 612 613 /* 0x13 */ 614 {IOERR_ILLEGAL_LENGTH, FC_PKT_LOCAL_RJT, FC_REASON_ILLEGAL_LENGTH, 615 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 616 617 /* 0x14 */ 618 {IOERR_UNSUPPORTED_FEATURE, FC_PKT_LOCAL_RJT, FC_REASON_UNSUPPORTED, 619 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 620 621 /* 0x15 */ 622 {IOERR_ABORT_IN_PROGRESS, FC_PKT_LOCAL_RJT, FC_REASON_ABORTED, 623 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 624 625 /* 0x16 */ 626 {IOERR_ABORT_REQUESTED, FC_PKT_LOCAL_RJT, FC_REASON_ABORTED, 627 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 628 629 /* 0x17 */ 630 {IOERR_RCV_BUFFER_TIMEOUT, FC_PKT_LOCAL_RJT, FC_REASON_RX_BUF_TIMEOUT, 631 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 632 633 /* 0x18 */ 634 {IOERR_LOOP_OPEN_FAILURE, FC_PKT_LOCAL_RJT, FC_REASON_FCAL_OPN_FAIL, 635 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 636 637 /* 0x1A */ 638 {IOERR_LINK_DOWN, FC_PKT_PORT_OFFLINE, FC_REASON_OFFLINE, 639 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 640 641 /* 0x21 */ 642 {IOERR_BAD_HOST_ADDRESS, FC_PKT_LOCAL_RJT, FC_REASON_BAD_SID, 643 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 644 645 /* Occurs at link down */ 646 /* 0x28 */ 647 {IOERR_BUFFER_SHORTAGE, FC_PKT_PORT_OFFLINE, FC_REASON_OFFLINE, 648 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 649 650 /* 0xF0 */ 651 {IOERR_ABORT_TIMEOUT, FC_PKT_TIMEOUT, FC_REASON_SEQ_TIMEOUT, 652 FC_EXPLN_NONE, FC_ACTION_RETRYABLE}, 653 }; 654 655 #define IOERR_MAX (sizeof (emlxs_ioerr_tbl)/sizeof (emlxs_xlat_err_t)) 656 657 658 659 emlxs_table_t emlxs_error_table[] = { 660 {IOERR_SUCCESS, "No error."}, 661 {IOERR_MISSING_CONTINUE, "Missing continue."}, 662 {IOERR_SEQUENCE_TIMEOUT, "Sequence timeout."}, 663 {IOERR_INTERNAL_ERROR, "Internal error."}, 664 {IOERR_INVALID_RPI, "Invalid RPI."}, 665 {IOERR_NO_XRI, "No XRI."}, 666 {IOERR_ILLEGAL_COMMAND, "Illegal command."}, 667 {IOERR_XCHG_DROPPED, "Exchange dropped."}, 668 {IOERR_ILLEGAL_FIELD, "Illegal field."}, 669 {IOERR_RCV_BUFFER_WAITING, "RX buffer waiting."}, 670 {IOERR_TX_DMA_FAILED, "TX DMA failed."}, 671 {IOERR_RX_DMA_FAILED, "RX DMA failed."}, 672 {IOERR_ILLEGAL_FRAME, "Illegal frame."}, 673 {IOERR_NO_RESOURCES, "No resources."}, 674 {IOERR_ILLEGAL_LENGTH, "Illegal length."}, 675 {IOERR_UNSUPPORTED_FEATURE, "Unsupported feature."}, 676 {IOERR_ABORT_IN_PROGRESS, "Abort in progess."}, 677 {IOERR_ABORT_REQUESTED, "Abort requested."}, 678 {IOERR_RCV_BUFFER_TIMEOUT, "RX buffer timeout."}, 679 {IOERR_LOOP_OPEN_FAILURE, "Loop open failed."}, 680 {IOERR_RING_RESET, "Ring reset."}, 681 {IOERR_LINK_DOWN, "Link down."}, 682 {IOERR_CORRUPTED_DATA, "Corrupted data."}, 683 {IOERR_CORRUPTED_RPI, "Corrupted RPI."}, 684 {IOERR_OUT_OF_ORDER_DATA, "Out-of-order data."}, 685 {IOERR_OUT_OF_ORDER_ACK, "Out-of-order ack."}, 686 {IOERR_DUP_FRAME, "Duplicate frame."}, 687 {IOERR_LINK_CONTROL_FRAME, "Link control frame."}, 688 {IOERR_BAD_HOST_ADDRESS, "Bad host address."}, 689 {IOERR_RCV_HDRBUF_WAITING, "RX header buffer waiting."}, 690 {IOERR_MISSING_HDR_BUFFER, "Missing header buffer."}, 691 {IOERR_MSEQ_CHAIN_CORRUPTED, "MSEQ chain corrupted."}, 692 {IOERR_ABORTMULT_REQUESTED, "Abort multiple requested."}, 693 {IOERR_BUFFER_SHORTAGE, "Buffer shortage."}, 694 {IOERR_XRIBUF_WAITING, "XRI buffer shortage"}, 695 {IOERR_XRIBUF_MISSING, "XRI buffer missing"}, 696 {IOERR_ROFFSET_INVAL, "Relative offset invalid."}, 697 {IOERR_ROFFSET_MISSING, "Relative offset missing."}, 698 {IOERR_INSUF_BUFFER, "Buffer too small."}, 699 {IOERR_MISSING_SI, "ELS frame missing SI"}, 700 {IOERR_MISSING_ES, "Exhausted burst without ES"}, 701 {IOERR_INCOMP_XFER, "Transfer incomplete."}, 702 {IOERR_ABORT_TIMEOUT, "Abort timeout."} 703 704 }; /* emlxs_error_table */ 705 706 707 emlxs_table_t emlxs_state_table[] = { 708 {IOSTAT_SUCCESS, "Success."}, 709 {IOSTAT_FCP_RSP_ERROR, "FCP response error."}, 710 {IOSTAT_REMOTE_STOP, "Remote stop."}, 711 {IOSTAT_LOCAL_REJECT, "Local reject."}, 712 {IOSTAT_NPORT_RJT, "NPort reject."}, 713 {IOSTAT_FABRIC_RJT, "Fabric reject."}, 714 {IOSTAT_NPORT_BSY, "Nport busy."}, 715 {IOSTAT_FABRIC_BSY, "Fabric busy."}, 716 {IOSTAT_INTERMED_RSP, "Intermediate response."}, 717 {IOSTAT_LS_RJT, "LS reject."}, 718 {IOSTAT_CMD_REJECT, "Cmd reject."}, 719 {IOSTAT_FCP_TGT_LENCHK, "TGT length check."}, 720 {IOSTAT_NEED_BUFF_ENTRY, "Need buffer entry."}, 721 {IOSTAT_DATA_UNDERRUN, "Data underrun."}, 722 {IOSTAT_DATA_OVERRUN, "Data overrun."}, 723 724 }; /* emlxs_state_table */ 725 726 727 #ifdef MENLO_SUPPORT 728 emlxs_table_t emlxs_menlo_cmd_table[] = { 729 {MENLO_CMD_INITIALIZE, "MENLO_INIT"}, 730 {MENLO_CMD_FW_DOWNLOAD, "MENLO_FW_DOWNLOAD"}, 731 {MENLO_CMD_READ_MEMORY, "MENLO_READ_MEM"}, 732 {MENLO_CMD_WRITE_MEMORY, "MENLO_WRITE_MEM"}, 733 {MENLO_CMD_FTE_INSERT, "MENLO_FTE_INSERT"}, 734 {MENLO_CMD_FTE_DELETE, "MENLO_FTE_DELETE"}, 735 736 {MENLO_CMD_GET_INIT, "MENLO_GET_INIT"}, 737 {MENLO_CMD_GET_CONFIG, "MENLO_GET_CONFIG"}, 738 {MENLO_CMD_GET_PORT_STATS, "MENLO_GET_PORT_STATS"}, 739 {MENLO_CMD_GET_LIF_STATS, "MENLO_GET_LIF_STATS"}, 740 {MENLO_CMD_GET_ASIC_STATS, "MENLO_GET_ASIC_STATS"}, 741 {MENLO_CMD_GET_LOG_CONFIG, "MENLO_GET_LOG_CFG"}, 742 {MENLO_CMD_GET_LOG_DATA, "MENLO_GET_LOG_DATA"}, 743 {MENLO_CMD_GET_PANIC_LOG, "MENLO_GET_PANIC_LOG"}, 744 {MENLO_CMD_GET_LB_MODE, "MENLO_GET_LB_MODE"}, 745 746 {MENLO_CMD_SET_PAUSE, "MENLO_SET_PAUSE"}, 747 {MENLO_CMD_SET_FCOE_COS, "MENLO_SET_FCOE_COS"}, 748 {MENLO_CMD_SET_UIF_PORT_TYPE, "MENLO_SET_UIF_TYPE"}, 749 750 {MENLO_CMD_DIAGNOSTICS, "MENLO_DIAGNOSTICS"}, 751 {MENLO_CMD_LOOPBACK, "MENLO_LOOPBACK"}, 752 753 {MENLO_CMD_RESET, "MENLO_RESET"}, 754 {MENLO_CMD_SET_MODE, "MENLO_SET_MODE"} 755 756 }; /* emlxs_menlo_cmd_table */ 757 758 emlxs_table_t emlxs_menlo_rsp_table[] = { 759 {MENLO_RSP_SUCCESS, "SUCCESS"}, 760 {MENLO_ERR_FAILED, "FAILED"}, 761 {MENLO_ERR_INVALID_CMD, "INVALID_CMD"}, 762 {MENLO_ERR_INVALID_CREDIT, "INVALID_CREDIT"}, 763 {MENLO_ERR_INVALID_SIZE, "INVALID_SIZE"}, 764 {MENLO_ERR_INVALID_ADDRESS, "INVALID_ADDRESS"}, 765 {MENLO_ERR_INVALID_CONTEXT, "INVALID_CONTEXT"}, 766 {MENLO_ERR_INVALID_LENGTH, "INVALID_LENGTH"}, 767 {MENLO_ERR_INVALID_TYPE, "INVALID_TYPE"}, 768 {MENLO_ERR_INVALID_DATA, "INVALID_DATA"}, 769 {MENLO_ERR_INVALID_VALUE1, "INVALID_VALUE1"}, 770 {MENLO_ERR_INVALID_VALUE2, "INVALID_VALUE2"}, 771 {MENLO_ERR_INVALID_MASK, "INVALID_MASK"}, 772 {MENLO_ERR_CHECKSUM, "CHECKSUM_ERROR"}, 773 {MENLO_ERR_UNKNOWN_FCID, "UNKNOWN_FCID"}, 774 {MENLO_ERR_UNKNOWN_WWN, "UNKNOWN_WWN"}, 775 {MENLO_ERR_BUSY, "BUSY"}, 776 777 }; /* emlxs_menlo_rsp_table */ 778 779 #endif /* MENLO_SUPPORT */ 780 781 782 emlxs_table_t emlxs_mscmd_table[] = { 783 {SLI_CT_RESPONSE_FS_ACC, "CT_ACC"}, 784 {SLI_CT_RESPONSE_FS_RJT, "CT_RJT"}, 785 {MS_GTIN, "MS_GTIN"}, 786 {MS_GIEL, "MS_GIEL"}, 787 {MS_GIET, "MS_GIET"}, 788 {MS_GDID, "MS_GDID"}, 789 {MS_GMID, "MS_GMID"}, 790 {MS_GFN, "MS_GFN"}, 791 {MS_GIELN, "MS_GIELN"}, 792 {MS_GMAL, "MS_GMAL"}, 793 {MS_GIEIL, "MS_GIEIL"}, 794 {MS_GPL, "MS_GPL"}, 795 {MS_GPT, "MS_GPT"}, 796 {MS_GPPN, "MS_GPPN"}, 797 {MS_GAPNL, "MS_GAPNL"}, 798 {MS_GPS, "MS_GPS"}, 799 {MS_GPSC, "MS_GPSC"}, 800 {MS_GATIN, "MS_GATIN"}, 801 {MS_GSES, "MS_GSES"}, 802 {MS_GPLNL, "MS_GPLNL"}, 803 {MS_GPLT, "MS_GPLT"}, 804 {MS_GPLML, "MS_GPLML"}, 805 {MS_GPAB, "MS_GPAB"}, 806 {MS_GNPL, "MS_GNPL"}, 807 {MS_GPNL, "MS_GPNL"}, 808 {MS_GPFCP, "MS_GPFCP"}, 809 {MS_GPLI, "MS_GPLI"}, 810 {MS_GNID, "MS_GNID"}, 811 {MS_RIELN, "MS_RIELN"}, 812 {MS_RPL, "MS_RPL"}, 813 {MS_RPLN, "MS_RPLN"}, 814 {MS_RPLT, "MS_RPLT"}, 815 {MS_RPLM, "MS_RPLM"}, 816 {MS_RPAB, "MS_RPAB"}, 817 {MS_RPFCP, "MS_RPFCP"}, 818 {MS_RPLI, "MS_RPLI"}, 819 {MS_DPL, "MS_DPL"}, 820 {MS_DPLN, "MS_DPLN"}, 821 {MS_DPLM, "MS_DPLM"}, 822 {MS_DPLML, "MS_DPLML"}, 823 {MS_DPLI, "MS_DPLI"}, 824 {MS_DPAB, "MS_DPAB"}, 825 {MS_DPALL, "MS_DPALL"} 826 827 }; /* emlxs_mscmd_table */ 828 829 830 emlxs_table_t emlxs_ctcmd_table[] = { 831 {SLI_CT_RESPONSE_FS_ACC, "CT_ACC"}, 832 {SLI_CT_RESPONSE_FS_RJT, "CT_RJT"}, 833 {SLI_CTNS_GA_NXT, "GA_NXT"}, 834 {SLI_CTNS_GPN_ID, "GPN_ID"}, 835 {SLI_CTNS_GNN_ID, "GNN_ID"}, 836 {SLI_CTNS_GCS_ID, "GCS_ID"}, 837 {SLI_CTNS_GFT_ID, "GFT_ID"}, 838 {SLI_CTNS_GSPN_ID, "GSPN_ID"}, 839 {SLI_CTNS_GPT_ID, "GPT_ID"}, 840 {SLI_CTNS_GID_PN, "GID_PN"}, 841 {SLI_CTNS_GID_NN, "GID_NN"}, 842 {SLI_CTNS_GIP_NN, "GIP_NN"}, 843 {SLI_CTNS_GIPA_NN, "GIPA_NN"}, 844 {SLI_CTNS_GSNN_NN, "GSNN_NN"}, 845 {SLI_CTNS_GNN_IP, "GNN_IP"}, 846 {SLI_CTNS_GIPA_IP, "GIPA_IP"}, 847 {SLI_CTNS_GID_FT, "GID_FT"}, 848 {SLI_CTNS_GID_PT, "GID_PT"}, 849 {SLI_CTNS_RPN_ID, "RPN_ID"}, 850 {SLI_CTNS_RNN_ID, "RNN_ID"}, 851 {SLI_CTNS_RCS_ID, "RCS_ID"}, 852 {SLI_CTNS_RFT_ID, "RFT_ID"}, 853 {SLI_CTNS_RSPN_ID, "RSPN_ID"}, 854 {SLI_CTNS_RPT_ID, "RPT_ID"}, 855 {SLI_CTNS_RIP_NN, "RIP_NN"}, 856 {SLI_CTNS_RIPA_NN, "RIPA_NN"}, 857 {SLI_CTNS_RSNN_NN, "RSNN_NN"}, 858 {SLI_CTNS_DA_ID, "DA_ID"}, 859 {SLI_CT_LOOPBACK, "LOOPBACK"} /* Driver special */ 860 861 }; /* emlxs_ctcmd_table */ 862 863 864 865 emlxs_table_t emlxs_rmcmd_table[] = { 866 {SLI_CT_RESPONSE_FS_ACC, "CT_ACC"}, 867 {SLI_CT_RESPONSE_FS_RJT, "CT_RJT"}, 868 {CT_OP_GSAT, "RM_GSAT"}, 869 {CT_OP_GHAT, "RM_GHAT"}, 870 {CT_OP_GPAT, "RM_GPAT"}, 871 {CT_OP_GDAT, "RM_GDAT"}, 872 {CT_OP_GPST, "RM_GPST"}, 873 {CT_OP_GDP, "RM_GDP"}, 874 {CT_OP_GDPG, "RM_GDPG"}, 875 {CT_OP_GEPS, "RM_GEPS"}, 876 {CT_OP_GLAT, "RM_GLAT"}, 877 {CT_OP_SSAT, "RM_SSAT"}, 878 {CT_OP_SHAT, "RM_SHAT"}, 879 {CT_OP_SPAT, "RM_SPAT"}, 880 {CT_OP_SDAT, "RM_SDAT"}, 881 {CT_OP_SDP, "RM_SDP"}, 882 {CT_OP_SBBS, "RM_SBBS"}, 883 {CT_OP_RPST, "RM_RPST"}, 884 {CT_OP_VFW, "RM_VFW"}, 885 {CT_OP_DFW, "RM_DFW"}, 886 {CT_OP_RES, "RM_RES"}, 887 {CT_OP_RHD, "RM_RHD"}, 888 {CT_OP_UFW, "RM_UFW"}, 889 {CT_OP_RDP, "RM_RDP"}, 890 {CT_OP_GHDR, "RM_GHDR"}, 891 {CT_OP_CHD, "RM_CHD"}, 892 {CT_OP_SSR, "RM_SSR"}, 893 {CT_OP_RSAT, "RM_RSAT"}, 894 {CT_OP_WSAT, "RM_WSAT"}, 895 {CT_OP_RSAH, "RM_RSAH"}, 896 {CT_OP_WSAH, "RM_WSAH"}, 897 {CT_OP_RACT, "RM_RACT"}, 898 {CT_OP_WACT, "RM_WACT"}, 899 {CT_OP_RKT, "RM_RKT"}, 900 {CT_OP_WKT, "RM_WKT"}, 901 {CT_OP_SSC, "RM_SSC"}, 902 {CT_OP_QHBA, "RM_QHBA"}, 903 {CT_OP_GST, "RM_GST"}, 904 {CT_OP_GFTM, "RM_GFTM"}, 905 {CT_OP_SRL, "RM_SRL"}, 906 {CT_OP_SI, "RM_SI"}, 907 {CT_OP_SRC, "RM_SRC"}, 908 {CT_OP_GPB, "RM_GPB"}, 909 {CT_OP_SPB, "RM_SPB"}, 910 {CT_OP_RPB, "RM_RPB"}, 911 {CT_OP_RAPB, "RM_RAPB"}, 912 {CT_OP_GBC, "RM_GBC"}, 913 {CT_OP_GBS, "RM_GBS"}, 914 {CT_OP_SBS, "RM_SBS"}, 915 {CT_OP_GANI, "RM_GANI"}, 916 {CT_OP_GRV, "RM_GRV"}, 917 {CT_OP_GAPBS, "RM_GAPBS"}, 918 {CT_OP_APBC, "RM_APBC"}, 919 {CT_OP_GDT, "RM_GDT"}, 920 {CT_OP_GDLMI, "RM_GDLMI"}, 921 {CT_OP_GANA, "RM_GANA"}, 922 {CT_OP_GDLV, "RM_GDLV"}, 923 {CT_OP_GWUP, "RM_GWUP"}, 924 {CT_OP_GLM, "RM_GLM"}, 925 {CT_OP_GABS, "RM_GABS"}, 926 {CT_OP_SABS, "RM_SABS"}, 927 {CT_OP_RPR, "RM_RPR"}, 928 {SLI_CT_LOOPBACK, "LOOPBACK"} /* Driver special */ 929 930 }; /* emlxs_rmcmd_table */ 931 932 933 emlxs_table_t emlxs_elscmd_table[] = { 934 {ELS_CMD_ACC, "ACC"}, 935 {ELS_CMD_LS_RJT, "LS_RJT"}, 936 {ELS_CMD_PLOGI, "PLOGI"}, 937 {ELS_CMD_FLOGI, "FLOGI"}, 938 {ELS_CMD_LOGO, "LOGO"}, 939 {ELS_CMD_ABTX, "ABTX"}, 940 {ELS_CMD_RCS, "RCS"}, 941 {ELS_CMD_RES, "RES"}, 942 {ELS_CMD_RSS, "RSS"}, 943 {ELS_CMD_RSI, "RSI"}, 944 {ELS_CMD_ESTS, "ESTS"}, 945 {ELS_CMD_ESTC, "ESTC"}, 946 {ELS_CMD_ADVC, "ADVC"}, 947 {ELS_CMD_RTV, "RTV"}, 948 {ELS_CMD_RLS, "RLS"}, 949 {ELS_CMD_ECHO, "ECHO"}, 950 {ELS_CMD_TEST, "TEST"}, 951 {ELS_CMD_RRQ, "RRQ"}, 952 {ELS_CMD_PRLI, "PRLI"}, 953 {ELS_CMD_PRLO, "PRLO"}, 954 {ELS_CMD_SCN, "SCN"}, 955 {ELS_CMD_TPLS, "TPLS"}, 956 {ELS_CMD_GPRLO, "GPRLO"}, 957 {ELS_CMD_GAID, "GAID"}, 958 {ELS_CMD_FACT, "FACT"}, 959 {ELS_CMD_FDACT, "FDACT"}, 960 {ELS_CMD_NACT, "NACT"}, 961 {ELS_CMD_NDACT, "NDACT"}, 962 {ELS_CMD_QoSR, "QoSR"}, 963 {ELS_CMD_RVCS, "RVCS"}, 964 {ELS_CMD_PDISC, "PDISC"}, 965 {ELS_CMD_FDISC, "FDISC"}, 966 {ELS_CMD_ADISC, "ADISC"}, 967 {ELS_CMD_FARP, "FARP"}, 968 {ELS_CMD_FARPR, "FARPR"}, 969 {ELS_CMD_FAN, "FAN"}, 970 {ELS_CMD_RSCN, "RSCN"}, 971 {ELS_CMD_SCR, "SCR"}, 972 {ELS_CMD_LINIT, "LINIT"}, 973 {ELS_CMD_RNID, "RNID"}, 974 {ELS_CMD_AUTH, "AUTH"} 975 976 }; /* emlxs_elscmd_table */ 977 978 979 /* 980 * 981 * Device Driver Entry Routines 982 * 983 */ 984 985 #ifdef MODSYM_SUPPORT 986 static void emlxs_fca_modclose(); 987 static int emlxs_fca_modopen(); 988 emlxs_modsym_t emlxs_modsym; /* uses emlxs_device.lock */ 989 990 static int 991 emlxs_fca_modopen() 992 { 993 int err; 994 995 if (emlxs_modsym.mod_fctl) { 996 return (0); 997 } 998 999 /* Leadville (fctl) */ 1000 err = 0; 1001 emlxs_modsym.mod_fctl = 1002 ddi_modopen("misc/fctl", KRTLD_MODE_FIRST, &err); 1003 if (!emlxs_modsym.mod_fctl) { 1004 cmn_err(CE_WARN, 1005 "?%s: misc/fctl: ddi_modopen misc/fctl failed: error=%d", 1006 DRIVER_NAME, err); 1007 1008 goto failed; 1009 } 1010 1011 err = 0; 1012 /* Check if the fctl fc_fca_attach is present */ 1013 emlxs_modsym.fc_fca_attach = 1014 (int (*)())ddi_modsym(emlxs_modsym.mod_fctl, "fc_fca_attach", 1015 &err); 1016 if ((void *)emlxs_modsym.fc_fca_attach == NULL) { 1017 cmn_err(CE_WARN, 1018 "?%s: misc/fctl: fc_fca_attach not present", DRIVER_NAME); 1019 goto failed; 1020 } 1021 1022 err = 0; 1023 /* Check if the fctl fc_fca_detach is present */ 1024 emlxs_modsym.fc_fca_detach = 1025 (int (*)())ddi_modsym(emlxs_modsym.mod_fctl, "fc_fca_detach", 1026 &err); 1027 if ((void *)emlxs_modsym.fc_fca_detach == NULL) { 1028 cmn_err(CE_WARN, 1029 "?%s: misc/fctl: fc_fca_detach not present", DRIVER_NAME); 1030 goto failed; 1031 } 1032 1033 err = 0; 1034 /* Check if the fctl fc_fca_init is present */ 1035 emlxs_modsym.fc_fca_init = 1036 (int (*)())ddi_modsym(emlxs_modsym.mod_fctl, "fc_fca_init", &err); 1037 if ((void *)emlxs_modsym.fc_fca_init == NULL) { 1038 cmn_err(CE_WARN, 1039 "?%s: misc/fctl: fc_fca_init not present", DRIVER_NAME); 1040 goto failed; 1041 } 1042 1043 return (0); 1044 1045 failed: 1046 1047 emlxs_fca_modclose(); 1048 1049 return (1); 1050 1051 1052 } /* emlxs_fca_modopen() */ 1053 1054 1055 static void 1056 emlxs_fca_modclose() 1057 { 1058 if (emlxs_modsym.mod_fctl) { 1059 (void) ddi_modclose(emlxs_modsym.mod_fctl); 1060 emlxs_modsym.mod_fctl = 0; 1061 } 1062 1063 emlxs_modsym.fc_fca_attach = NULL; 1064 emlxs_modsym.fc_fca_detach = NULL; 1065 emlxs_modsym.fc_fca_init = NULL; 1066 1067 return; 1068 1069 } /* emlxs_fca_modclose() */ 1070 1071 #endif /* MODSYM_SUPPORT */ 1072 1073 1074 1075 /* 1076 * Global driver initialization, called once when driver is loaded 1077 */ 1078 int 1079 _init(void) 1080 { 1081 int ret; 1082 char buf[64]; 1083 1084 /* 1085 * First init call for this driver, 1086 * so initialize the emlxs_dev_ctl structure. 1087 */ 1088 bzero(&emlxs_device, sizeof (emlxs_device)); 1089 1090 #ifdef MODSYM_SUPPORT 1091 bzero(&emlxs_modsym, sizeof (emlxs_modsym_t)); 1092 #endif /* MODSYM_SUPPORT */ 1093 1094 (void) sprintf(buf, "%s_device mutex", DRIVER_NAME); 1095 mutex_init(&emlxs_device.lock, buf, MUTEX_DRIVER, NULL); 1096 1097 (void) drv_getparm(LBOLT, &emlxs_device.log_timestamp); 1098 emlxs_device.drv_timestamp = ddi_get_time(); 1099 1100 for (ret = 0; ret < MAX_FC_BRDS; ret++) { 1101 emlxs_instance[ret] = (uint32_t)-1; 1102 } 1103 1104 /* 1105 * Provide for one ddiinst of the emlxs_dev_ctl structure 1106 * for each possible board in the system. 1107 */ 1108 if ((ret = ddi_soft_state_init(&emlxs_soft_state, 1109 sizeof (emlxs_hba_t), MAX_FC_BRDS)) != 0) { 1110 cmn_err(CE_WARN, 1111 "?%s: _init: ddi_soft_state_init failed. rval=%x", 1112 DRIVER_NAME, ret); 1113 1114 return (ret); 1115 } 1116 1117 #ifdef MODSYM_SUPPORT 1118 /* Open SFS */ 1119 (void) emlxs_fca_modopen(); 1120 #endif /* MODSYM_SUPPORT */ 1121 1122 /* Setup devops for SFS */ 1123 MODSYM(fc_fca_init)(&emlxs_ops); 1124 1125 if ((ret = mod_install(&emlxs_modlinkage)) != 0) { 1126 (void) ddi_soft_state_fini(&emlxs_soft_state); 1127 #ifdef MODSYM_SUPPORT 1128 /* Close SFS */ 1129 emlxs_fca_modclose(); 1130 #endif /* MODSYM_SUPPORT */ 1131 1132 return (ret); 1133 } 1134 1135 #ifdef SAN_DIAG_SUPPORT 1136 (void) sprintf(buf, "%s_sd_bucket mutex", DRIVER_NAME); 1137 mutex_init(&sd_bucket_mutex, buf, MUTEX_DRIVER, NULL); 1138 #endif /* SAN_DIAG_SUPPORT */ 1139 1140 return (ret); 1141 1142 } /* _init() */ 1143 1144 1145 /* 1146 * Called when driver is unloaded. 1147 */ 1148 int 1149 _fini(void) 1150 { 1151 int ret; 1152 1153 if ((ret = mod_remove(&emlxs_modlinkage)) != 0) { 1154 return (ret); 1155 } 1156 #ifdef MODSYM_SUPPORT 1157 /* Close SFS */ 1158 emlxs_fca_modclose(); 1159 #endif /* MODSYM_SUPPORT */ 1160 1161 /* 1162 * Destroy the soft state structure 1163 */ 1164 (void) ddi_soft_state_fini(&emlxs_soft_state); 1165 1166 /* Destroy the global device lock */ 1167 mutex_destroy(&emlxs_device.lock); 1168 1169 #ifdef SAN_DIAG_SUPPORT 1170 mutex_destroy(&sd_bucket_mutex); 1171 #endif /* SAN_DIAG_SUPPORT */ 1172 1173 return (ret); 1174 1175 } /* _fini() */ 1176 1177 1178 1179 int 1180 _info(struct modinfo *modinfop) 1181 { 1182 1183 return (mod_info(&emlxs_modlinkage, modinfop)); 1184 1185 } /* _info() */ 1186 1187 1188 /* 1189 * Attach an ddiinst of an emlx host adapter. 1190 * Allocate data structures, initialize the adapter and we're ready to fly. 1191 */ 1192 static int 1193 emlxs_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) 1194 { 1195 emlxs_hba_t *hba; 1196 int ddiinst; 1197 int emlxinst; 1198 int rval; 1199 1200 switch (cmd) { 1201 case DDI_ATTACH: 1202 /* If successful this will set EMLXS_PM_IN_ATTACH */ 1203 rval = emlxs_hba_attach(dip); 1204 break; 1205 1206 case DDI_PM_RESUME: 1207 /* This will resume the driver */ 1208 rval = emlxs_pm_raise_power(dip); 1209 break; 1210 1211 case DDI_RESUME: 1212 /* This will resume the driver */ 1213 rval = emlxs_hba_resume(dip); 1214 break; 1215 1216 default: 1217 rval = DDI_FAILURE; 1218 } 1219 1220 if (rval == DDI_SUCCESS) { 1221 ddiinst = ddi_get_instance(dip); 1222 emlxinst = emlxs_get_instance(ddiinst); 1223 hba = emlxs_device.hba[emlxinst]; 1224 1225 if ((hba != NULL) && (hba != (emlxs_hba_t *)-1)) { 1226 1227 /* Enable driver dump feature */ 1228 mutex_enter(&EMLXS_PORT_LOCK); 1229 hba->flag |= FC_DUMP_SAFE; 1230 mutex_exit(&EMLXS_PORT_LOCK); 1231 } 1232 } 1233 1234 return (rval); 1235 1236 } /* emlxs_attach() */ 1237 1238 1239 /* 1240 * Detach/prepare driver to unload (see detach(9E)). 1241 */ 1242 static int 1243 emlxs_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) 1244 { 1245 emlxs_hba_t *hba; 1246 emlxs_port_t *port; 1247 int ddiinst; 1248 int emlxinst; 1249 int rval; 1250 1251 ddiinst = ddi_get_instance(dip); 1252 emlxinst = emlxs_get_instance(ddiinst); 1253 hba = emlxs_device.hba[emlxinst]; 1254 1255 if (hba == NULL) { 1256 cmn_err(CE_WARN, "?%s: Detach: NULL device.", DRIVER_NAME); 1257 1258 return (DDI_FAILURE); 1259 } 1260 1261 if (hba == (emlxs_hba_t *)-1) { 1262 cmn_err(CE_WARN, "?%s: Detach: Device attach failed.", 1263 DRIVER_NAME); 1264 1265 return (DDI_FAILURE); 1266 } 1267 1268 port = &PPORT; 1269 rval = DDI_SUCCESS; 1270 1271 /* Check driver dump */ 1272 mutex_enter(&EMLXS_PORT_LOCK); 1273 1274 if (hba->flag & FC_DUMP_ACTIVE) { 1275 mutex_exit(&EMLXS_PORT_LOCK); 1276 1277 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg, 1278 "emlxs_detach: Driver busy. Driver dump active."); 1279 1280 return (DDI_FAILURE); 1281 } 1282 1283 #ifdef SFCT_SUPPORT 1284 if (port->tgt_mode && ((port->fct_flags & FCT_STATE_PORT_ONLINE) || 1285 (port->fct_flags & FCT_STATE_NOT_ACKED))) { 1286 mutex_exit(&EMLXS_PORT_LOCK); 1287 1288 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg, 1289 "emlxs_detach: Driver busy. Target mode active."); 1290 1291 return (DDI_FAILURE); 1292 } 1293 #endif /* SFCT_SUPPORT */ 1294 1295 if (port->ini_mode && (port->flag & EMLXS_PORT_BOUND)) { 1296 mutex_exit(&EMLXS_PORT_LOCK); 1297 1298 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg, 1299 "emlxs_detach: Driver busy. Initiator mode active."); 1300 1301 return (DDI_FAILURE); 1302 } 1303 1304 hba->flag &= ~FC_DUMP_SAFE; 1305 1306 mutex_exit(&EMLXS_PORT_LOCK); 1307 1308 switch (cmd) { 1309 case DDI_DETACH: 1310 1311 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_debug_msg, 1312 "DDI_DETACH"); 1313 1314 rval = emlxs_hba_detach(dip); 1315 1316 if (rval != DDI_SUCCESS) { 1317 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg, 1318 "Unable to detach."); 1319 } 1320 break; 1321 1322 1323 case DDI_PM_SUSPEND: 1324 1325 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_debug_msg, 1326 "DDI_PM_SUSPEND"); 1327 1328 /* This will suspend the driver */ 1329 rval = emlxs_pm_lower_power(dip); 1330 1331 if (rval != DDI_SUCCESS) { 1332 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg, 1333 "Unable to lower power."); 1334 } 1335 1336 break; 1337 1338 1339 case DDI_SUSPEND: 1340 1341 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_debug_msg, 1342 "DDI_SUSPEND"); 1343 1344 /* Suspend the driver */ 1345 rval = emlxs_hba_suspend(dip); 1346 1347 if (rval != DDI_SUCCESS) { 1348 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg, 1349 "Unable to suspend driver."); 1350 } 1351 break; 1352 1353 1354 default: 1355 cmn_err(CE_WARN, "?%s: Detach: Unknown cmd received. cmd=%x", 1356 DRIVER_NAME, cmd); 1357 rval = DDI_FAILURE; 1358 } 1359 1360 if (rval == DDI_FAILURE) { 1361 /* Re-Enable driver dump feature */ 1362 mutex_enter(&EMLXS_PORT_LOCK); 1363 hba->flag |= FC_DUMP_SAFE; 1364 mutex_exit(&EMLXS_PORT_LOCK); 1365 } 1366 1367 return (rval); 1368 1369 } /* emlxs_detach() */ 1370 1371 1372 /* EMLXS_PORT_LOCK must be held when calling this */ 1373 extern void 1374 emlxs_port_init(emlxs_port_t *port) 1375 { 1376 emlxs_hba_t *hba = HBA; 1377 1378 /* Initialize the base node */ 1379 bzero((caddr_t)&port->node_base, sizeof (NODELIST)); 1380 port->node_base.nlp_Rpi = 0; 1381 port->node_base.nlp_DID = 0xffffff; 1382 port->node_base.nlp_list_next = NULL; 1383 port->node_base.nlp_list_prev = NULL; 1384 port->node_base.nlp_active = 1; 1385 port->node_base.nlp_base = 1; 1386 port->node_count = 0; 1387 1388 if (!(port->flag & EMLXS_PORT_ENABLE)) { 1389 uint8_t dummy_wwn[8] = 1390 { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; 1391 1392 bcopy((caddr_t)dummy_wwn, (caddr_t)&port->wwnn, 1393 sizeof (NAME_TYPE)); 1394 bcopy((caddr_t)dummy_wwn, (caddr_t)&port->wwpn, 1395 sizeof (NAME_TYPE)); 1396 } 1397 1398 if (!(port->flag & EMLXS_PORT_CONFIG)) { 1399 (void) strncpy((caddr_t)port->snn, (caddr_t)hba->snn, 256); 1400 (void) strncpy((caddr_t)port->spn, (caddr_t)hba->spn, 256); 1401 } 1402 1403 bcopy((caddr_t)&hba->sparam, (caddr_t)&port->sparam, 1404 sizeof (SERV_PARM)); 1405 bcopy((caddr_t)&port->wwnn, (caddr_t)&port->sparam.nodeName, 1406 sizeof (NAME_TYPE)); 1407 bcopy((caddr_t)&port->wwpn, (caddr_t)&port->sparam.portName, 1408 sizeof (NAME_TYPE)); 1409 1410 return; 1411 1412 } /* emlxs_port_init() */ 1413 1414 1415 void 1416 emlxs_disable_pcie_ce_err(emlxs_hba_t *hba) 1417 { 1418 #define NXT_PTR_OFF PCI_BYTE 1419 #define PCIE_DEVCTL_OFF 0x8 1420 #define PCIE_CAP_ID 0x10 1421 1422 uint8_t cap_ptr; 1423 uint8_t cap_id; 1424 uint16_t tmp16; 1425 1426 cap_ptr = ddi_get8(hba->pci_acc_handle, 1427 (uint8_t *)(hba->pci_addr + PCI_CAP_POINTER)); 1428 1429 while (cap_ptr) { 1430 cap_id = ddi_get8(hba->pci_acc_handle, 1431 (uint8_t *)(hba->pci_addr + cap_ptr)); 1432 1433 if (cap_id == PCIE_CAP_ID) { 1434 break; 1435 } 1436 cap_ptr = ddi_get8(hba->pci_acc_handle, 1437 (uint8_t *)(hba->pci_addr + cap_ptr + NXT_PTR_OFF)); 1438 } 1439 1440 /* PCI Express Capability Register Set */ 1441 /* Turn off the Correctable Error Reporting */ 1442 /* (the Device Control Register, bit 0). */ 1443 1444 if (cap_id == PCIE_CAP_ID) { 1445 tmp16 = ddi_get16(hba->pci_acc_handle, 1446 (uint16_t *)(hba->pci_addr + cap_ptr + PCIE_DEVCTL_OFF)); 1447 tmp16 &= ~1; 1448 (void) ddi_put16(hba->pci_acc_handle, 1449 (uint16_t *)(hba->pci_addr + cap_ptr + PCIE_DEVCTL_OFF), 1450 tmp16); 1451 } 1452 } 1453 1454 /* 1455 * emlxs_bind_port 1456 * 1457 * Arguments: 1458 * 1459 * dip: the dev_info pointer for the ddiinst 1460 * port_info: pointer to info handed back to the transport 1461 * bind_info: pointer to info from the transport 1462 * 1463 * Return values: a port handle for this port, NULL for failure 1464 * 1465 */ 1466 static opaque_t 1467 emlxs_bind_port(dev_info_t *dip, fc_fca_port_info_t *port_info, 1468 fc_fca_bind_info_t *bind_info) 1469 { 1470 emlxs_hba_t *hba; 1471 emlxs_port_t *port; 1472 emlxs_port_t *vport; 1473 int ddiinst; 1474 emlxs_vpd_t *vpd; 1475 emlxs_config_t *cfg; 1476 char *dptr; 1477 char buffer[16]; 1478 uint32_t length; 1479 uint32_t len; 1480 char topology[32]; 1481 char linkspeed[32]; 1482 1483 ddiinst = ddi_get_instance(dip); 1484 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 1485 port = &PPORT; 1486 1487 ddiinst = hba->ddiinst; 1488 vpd = &VPD; 1489 cfg = &CFG; 1490 1491 mutex_enter(&EMLXS_PORT_LOCK); 1492 1493 if (bind_info->port_num > 0) { 1494 #if (EMLXS_MODREV >= EMLXS_MODREV5) 1495 if (!(hba->flag & FC_NPIV_ENABLED) || 1496 !(bind_info->port_npiv) || 1497 (bind_info->port_num > hba->vpi_max)) 1498 #elif (EMLXS_MODREV >= EMLXS_MODREV3) 1499 if (!(hba->flag & FC_NPIV_ENABLED) || 1500 (bind_info->port_num > hba->vpi_high)) 1501 #endif 1502 { 1503 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 1504 "emlxs_port_bind: Port %d not supported.", 1505 bind_info->port_num); 1506 1507 mutex_exit(&EMLXS_PORT_LOCK); 1508 1509 port_info->pi_error = FC_OUTOFBOUNDS; 1510 return (NULL); 1511 } 1512 } 1513 1514 /* Get true port pointer */ 1515 port = &VPORT(bind_info->port_num); 1516 1517 if (port->tgt_mode) { 1518 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 1519 "emlxs_port_bind: Port %d is in target mode.", 1520 bind_info->port_num); 1521 1522 mutex_exit(&EMLXS_PORT_LOCK); 1523 1524 port_info->pi_error = FC_OUTOFBOUNDS; 1525 return (NULL); 1526 } 1527 1528 if (!port->ini_mode) { 1529 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 1530 "emlxs_port_bind: Port %d is not in initiator mode.", 1531 bind_info->port_num); 1532 1533 mutex_exit(&EMLXS_PORT_LOCK); 1534 1535 port_info->pi_error = FC_OUTOFBOUNDS; 1536 return (NULL); 1537 } 1538 1539 /* Make sure the port is not already bound to the transport */ 1540 if (port->flag & EMLXS_PORT_BOUND) { 1541 1542 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 1543 "emlxs_port_bind: Port %d already bound. flag=%x", 1544 bind_info->port_num, port->flag); 1545 1546 mutex_exit(&EMLXS_PORT_LOCK); 1547 1548 port_info->pi_error = FC_ALREADY; 1549 return (NULL); 1550 } 1551 1552 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 1553 "fca_bind_port: Port %d: port_info=%p bind_info=%p", 1554 bind_info->port_num, port_info, bind_info); 1555 1556 #if (EMLXS_MODREV >= EMLXS_MODREV5) 1557 if (bind_info->port_npiv) { 1558 bcopy((caddr_t)&bind_info->port_nwwn, (caddr_t)&port->wwnn, 1559 sizeof (NAME_TYPE)); 1560 bcopy((caddr_t)&bind_info->port_pwwn, (caddr_t)&port->wwpn, 1561 sizeof (NAME_TYPE)); 1562 if (port->snn[0] == 0) { 1563 (void) strncpy((caddr_t)port->snn, (caddr_t)hba->snn, 1564 256); 1565 } 1566 1567 if (port->spn[0] == 0) { 1568 (void) sprintf((caddr_t)port->spn, "%s VPort-%d", 1569 (caddr_t)hba->spn, port->vpi); 1570 } 1571 port->flag |= (EMLXS_PORT_CONFIG | EMLXS_PORT_ENABLE); 1572 } 1573 #endif /* >= EMLXS_MODREV5 */ 1574 1575 /* 1576 * Restricted login should apply both physical and 1577 * virtual ports. 1578 */ 1579 if (cfg[CFG_VPORT_RESTRICTED].current) { 1580 port->flag |= EMLXS_PORT_RESTRICTED; 1581 } 1582 1583 /* Perform generic port initialization */ 1584 emlxs_port_init(port); 1585 1586 /* Perform SFS specific initialization */ 1587 port->ulp_handle = bind_info->port_handle; 1588 port->ulp_statec_cb = bind_info->port_statec_cb; 1589 port->ulp_unsol_cb = bind_info->port_unsol_cb; 1590 port->ub_count = EMLXS_UB_TOKEN_OFFSET; 1591 port->ub_pool = NULL; 1592 1593 /* Update the port info structure */ 1594 1595 /* Set the topology and state */ 1596 if ((hba->state < FC_LINK_UP) || 1597 ((port->vpi > 0) && (!(port->flag & EMLXS_PORT_ENABLE) || 1598 !(hba->flag & FC_NPIV_SUPPORTED)))) { 1599 port_info->pi_port_state = FC_STATE_OFFLINE; 1600 port_info->pi_topology = FC_TOP_UNKNOWN; 1601 } 1602 #ifdef MENLO_SUPPORT 1603 else if (hba->flag & FC_MENLO_MODE) { 1604 port_info->pi_port_state = FC_STATE_OFFLINE; 1605 port_info->pi_topology = FC_TOP_UNKNOWN; 1606 } 1607 #endif /* MENLO_SUPPORT */ 1608 else { 1609 /* Check for loop topology */ 1610 if (hba->topology == TOPOLOGY_LOOP) { 1611 port_info->pi_port_state = FC_STATE_LOOP; 1612 (void) strcpy(topology, ", loop"); 1613 1614 if (hba->flag & FC_FABRIC_ATTACHED) { 1615 port_info->pi_topology = FC_TOP_PUBLIC_LOOP; 1616 } else { 1617 port_info->pi_topology = FC_TOP_PRIVATE_LOOP; 1618 } 1619 } else { 1620 port_info->pi_topology = FC_TOP_FABRIC; 1621 port_info->pi_port_state = FC_STATE_ONLINE; 1622 (void) strcpy(topology, ", fabric"); 1623 } 1624 1625 /* Set the link speed */ 1626 switch (hba->linkspeed) { 1627 case 0: 1628 (void) strcpy(linkspeed, "Gb"); 1629 port_info->pi_port_state |= FC_STATE_1GBIT_SPEED; 1630 break; 1631 1632 case LA_1GHZ_LINK: 1633 (void) strcpy(linkspeed, "1Gb"); 1634 port_info->pi_port_state |= FC_STATE_1GBIT_SPEED; 1635 break; 1636 case LA_2GHZ_LINK: 1637 (void) strcpy(linkspeed, "2Gb"); 1638 port_info->pi_port_state |= FC_STATE_2GBIT_SPEED; 1639 break; 1640 case LA_4GHZ_LINK: 1641 (void) strcpy(linkspeed, "4Gb"); 1642 port_info->pi_port_state |= FC_STATE_4GBIT_SPEED; 1643 break; 1644 case LA_8GHZ_LINK: 1645 (void) strcpy(linkspeed, "8Gb"); 1646 port_info->pi_port_state |= FC_STATE_8GBIT_SPEED; 1647 break; 1648 case LA_10GHZ_LINK: 1649 (void) strcpy(linkspeed, "10Gb"); 1650 port_info->pi_port_state |= FC_STATE_10GBIT_SPEED; 1651 break; 1652 default: 1653 (void) sprintf(linkspeed, "unknown(0x%x)", 1654 hba->linkspeed); 1655 break; 1656 } 1657 1658 /* Adjusting port context for link up messages */ 1659 vport = port; 1660 port = &PPORT; 1661 if (vport->vpi == 0) { 1662 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_link_up_msg, "%s%s", 1663 linkspeed, topology); 1664 } else if (!(hba->flag & FC_NPIV_LINKUP)) { 1665 hba->flag |= FC_NPIV_LINKUP; 1666 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_npiv_link_up_msg, 1667 "%s%s", linkspeed, topology); 1668 } 1669 port = vport; 1670 1671 } 1672 1673 /* PCIE Correctable Error Reporting workaround */ 1674 if ((hba->model_info.chip == EMLXS_BE_CHIP) && 1675 (bind_info->port_num == 0)) { 1676 emlxs_disable_pcie_ce_err(hba); 1677 } 1678 1679 /* Save initial state */ 1680 port->ulp_statec = port_info->pi_port_state; 1681 1682 /* 1683 * The transport needs a copy of the common service parameters 1684 * for this port. The transport can get any updates through 1685 * the getcap entry point. 1686 */ 1687 bcopy((void *) &port->sparam, 1688 (void *) &port_info->pi_login_params.common_service, 1689 sizeof (SERV_PARM)); 1690 1691 #if (EMLXS_MODREVX == EMLXS_MODREV2X) 1692 /* Swap the service parameters for ULP */ 1693 emlxs_swap_service_params((SERV_PARM *)&port_info->pi_login_params. 1694 common_service); 1695 #endif /* EMLXS_MODREV2X */ 1696 1697 port_info->pi_login_params.common_service.btob_credit = 0xffff; 1698 1699 bcopy((void *) &port->wwnn, 1700 (void *) &port_info->pi_login_params.node_ww_name, 1701 sizeof (NAME_TYPE)); 1702 1703 bcopy((void *) &port->wwpn, 1704 (void *) &port_info->pi_login_params.nport_ww_name, 1705 sizeof (NAME_TYPE)); 1706 1707 /* 1708 * We need to turn off CLASS2 support. 1709 * Otherwise, FC transport will use CLASS2 as default class 1710 * and never try with CLASS3. 1711 */ 1712 #if (EMLXS_MODREV >= EMLXS_MODREV3) 1713 #if (EMLXS_MODREVX >= EMLXS_MODREV3X) 1714 if ((port_info->pi_login_params.class_1.class_opt) & 0x0080) { 1715 port_info->pi_login_params.class_1.class_opt &= ~0x0080; 1716 } 1717 1718 if ((port_info->pi_login_params.class_2.class_opt) & 0x0080) { 1719 port_info->pi_login_params.class_2.class_opt &= ~0x0080; 1720 } 1721 #else /* EMLXS_SPARC or EMLXS_MODREV2X */ 1722 if ((port_info->pi_login_params.class_1.class_opt) & 0x8000) { 1723 port_info->pi_login_params.class_1.class_opt &= ~0x8000; 1724 } 1725 1726 if ((port_info->pi_login_params.class_2.class_opt) & 0x8000) { 1727 port_info->pi_login_params.class_2.class_opt &= ~0x8000; 1728 } 1729 #endif /* >= EMLXS_MODREV3X */ 1730 #endif /* >= EMLXS_MODREV3 */ 1731 1732 1733 #if (EMLXS_MODREV <= EMLXS_MODREV2) 1734 if ((port_info->pi_login_params.class_1.data[0]) & 0x80) { 1735 port_info->pi_login_params.class_1.data[0] &= ~0x80; 1736 } 1737 1738 if ((port_info->pi_login_params.class_2.data[0]) & 0x80) { 1739 port_info->pi_login_params.class_2.data[0] &= ~0x80; 1740 } 1741 #endif /* <= EMLXS_MODREV2 */ 1742 1743 /* Additional parameters */ 1744 port_info->pi_s_id.port_id = port->did; 1745 port_info->pi_s_id.priv_lilp_posit = 0; 1746 port_info->pi_hard_addr.hard_addr = cfg[CFG_ASSIGN_ALPA].current; 1747 1748 /* Initialize the RNID parameters */ 1749 bzero(&port_info->pi_rnid_params, sizeof (port_info->pi_rnid_params)); 1750 1751 (void) sprintf((char *)port_info->pi_rnid_params.params.global_id, 1752 "%01x%01x%02x%02x%02x%02x%02x%02x%02x", hba->wwpn.nameType, 1753 hba->wwpn.IEEEextMsn, hba->wwpn.IEEEextLsb, hba->wwpn.IEEE[0], 1754 hba->wwpn.IEEE[1], hba->wwpn.IEEE[2], hba->wwpn.IEEE[3], 1755 hba->wwpn.IEEE[4], hba->wwpn.IEEE[5]); 1756 1757 port_info->pi_rnid_params.params.unit_type = RNID_HBA; 1758 port_info->pi_rnid_params.params.port_id = port->did; 1759 port_info->pi_rnid_params.params.ip_version = RNID_IPV4; 1760 1761 /* Initialize the port attributes */ 1762 bzero(&port_info->pi_attrs, sizeof (port_info->pi_attrs)); 1763 1764 (void) strcpy(port_info->pi_attrs.manufacturer, "Emulex"); 1765 1766 port_info->pi_rnid_params.status = FC_SUCCESS; 1767 1768 (void) strcpy(port_info->pi_attrs.serial_number, vpd->serial_num); 1769 1770 (void) sprintf(port_info->pi_attrs.firmware_version, "%s (%s)", 1771 vpd->fw_version, vpd->fw_label); 1772 1773 #ifdef EMLXS_I386 1774 (void) sprintf(port_info->pi_attrs.option_rom_version, 1775 "Boot:%s", vpd->boot_version); 1776 #else /* EMLXS_SPARC */ 1777 (void) sprintf(port_info->pi_attrs.option_rom_version, 1778 "Boot:%s Fcode:%s", vpd->boot_version, vpd->fcode_version); 1779 #endif /* EMLXS_I386 */ 1780 1781 1782 (void) sprintf(port_info->pi_attrs.driver_version, "%s (%s)", 1783 emlxs_version, emlxs_revision); 1784 1785 (void) strcpy(port_info->pi_attrs.driver_name, DRIVER_NAME); 1786 1787 port_info->pi_attrs.vendor_specific_id = 1788 ((hba->model_info.device_id << 16) | PCI_VENDOR_ID_EMULEX); 1789 1790 port_info->pi_attrs.supported_cos = LE_SWAP32(FC_NS_CLASS3); 1791 1792 port_info->pi_attrs.max_frame_size = FF_FRAME_SIZE; 1793 1794 #if (EMLXS_MODREV >= EMLXS_MODREV5) 1795 1796 port_info->pi_rnid_params.params.num_attached = 0; 1797 1798 /* 1799 * Copy the serial number string (right most 16 chars) into the right 1800 * justified local buffer 1801 */ 1802 bzero(buffer, sizeof (buffer)); 1803 length = strlen(vpd->serial_num); 1804 len = (length > 16) ? 16 : length; 1805 bcopy(&vpd->serial_num[(length - len)], 1806 &buffer[(sizeof (buffer) - len)], len); 1807 1808 port_info->pi_attrs.hba_fru_details.port_index = vpd->port_index; 1809 1810 #endif /* >= EMLXS_MODREV5 */ 1811 1812 #if ((EMLXS_MODREV == EMLXS_MODREV3) || (EMLX_MODREV == EMLXS_MODREV4)) 1813 1814 port_info->pi_rnid_params.params.num_attached = 0; 1815 1816 if (hba->flag & FC_NPIV_ENABLED) { 1817 uint8_t byte; 1818 uint8_t *wwpn; 1819 uint32_t i; 1820 uint32_t j; 1821 1822 /* Copy the WWPN as a string into the local buffer */ 1823 wwpn = (uint8_t *)&hba->wwpn; 1824 for (i = 0; i < 16; i++) { 1825 byte = *wwpn++; 1826 j = ((byte & 0xf0) >> 4); 1827 if (j <= 9) { 1828 buffer[i] = 1829 (char)((uint8_t)'0' + (uint8_t)j); 1830 } else { 1831 buffer[i] = 1832 (char)((uint8_t)'A' + (uint8_t)(j - 1833 10)); 1834 } 1835 1836 i++; 1837 j = (byte & 0xf); 1838 if (j <= 9) { 1839 buffer[i] = 1840 (char)((uint8_t)'0' + (uint8_t)j); 1841 } else { 1842 buffer[i] = 1843 (char)((uint8_t)'A' + (uint8_t)(j - 1844 10)); 1845 } 1846 } 1847 1848 port_info->pi_attrs.hba_fru_details.port_index = port->vpi; 1849 } else { 1850 /* Copy the serial number string (right most 16 chars) */ 1851 /* into the right justified local buffer */ 1852 bzero(buffer, sizeof (buffer)); 1853 length = strlen(vpd->serial_num); 1854 len = (length > 16) ? 16 : length; 1855 bcopy(&vpd->serial_num[(length - len)], 1856 &buffer[(sizeof (buffer) - len)], len); 1857 1858 port_info->pi_attrs.hba_fru_details.port_index = 1859 vpd->port_index; 1860 } 1861 1862 #endif /* == EMLXS_MODREV3 || EMLXS_MODREV4 */ 1863 1864 #if (EMLXS_MODREV >= EMLXS_MODREV3) 1865 1866 dptr = (char *)&port_info->pi_attrs.hba_fru_details.high; 1867 dptr[0] = buffer[0]; 1868 dptr[1] = buffer[1]; 1869 dptr[2] = buffer[2]; 1870 dptr[3] = buffer[3]; 1871 dptr[4] = buffer[4]; 1872 dptr[5] = buffer[5]; 1873 dptr[6] = buffer[6]; 1874 dptr[7] = buffer[7]; 1875 port_info->pi_attrs.hba_fru_details.high = 1876 LE_SWAP64(port_info->pi_attrs.hba_fru_details.high); 1877 1878 dptr = (char *)&port_info->pi_attrs.hba_fru_details.low; 1879 dptr[0] = buffer[8]; 1880 dptr[1] = buffer[9]; 1881 dptr[2] = buffer[10]; 1882 dptr[3] = buffer[11]; 1883 dptr[4] = buffer[12]; 1884 dptr[5] = buffer[13]; 1885 dptr[6] = buffer[14]; 1886 dptr[7] = buffer[15]; 1887 port_info->pi_attrs.hba_fru_details.low = 1888 LE_SWAP64(port_info->pi_attrs.hba_fru_details.low); 1889 1890 #endif /* >= EMLXS_MODREV3 */ 1891 1892 #if (EMLXS_MODREV >= EMLXS_MODREV4) 1893 (void) strncpy((caddr_t)port_info->pi_attrs.sym_node_name, 1894 (caddr_t)port->snn, FCHBA_SYMB_NAME_LEN); 1895 (void) strncpy((caddr_t)port_info->pi_attrs.sym_port_name, 1896 (caddr_t)port->spn, FCHBA_SYMB_NAME_LEN); 1897 #endif /* >= EMLXS_MODREV4 */ 1898 1899 (void) sprintf(port_info->pi_attrs.hardware_version, "%x", vpd->biuRev); 1900 1901 /* Set the hba speed limit */ 1902 if (vpd->link_speed & LMT_10GB_CAPABLE) { 1903 port_info->pi_attrs.supported_speed |= 1904 FC_HBA_PORTSPEED_10GBIT; 1905 } 1906 if (vpd->link_speed & LMT_8GB_CAPABLE) { 1907 port_info->pi_attrs.supported_speed |= FC_HBA_PORTSPEED_8GBIT; 1908 } 1909 if (vpd->link_speed & LMT_4GB_CAPABLE) { 1910 port_info->pi_attrs.supported_speed |= FC_HBA_PORTSPEED_4GBIT; 1911 } 1912 if (vpd->link_speed & LMT_2GB_CAPABLE) { 1913 port_info->pi_attrs.supported_speed |= FC_HBA_PORTSPEED_2GBIT; 1914 } 1915 if (vpd->link_speed & LMT_1GB_CAPABLE) { 1916 port_info->pi_attrs.supported_speed |= FC_HBA_PORTSPEED_1GBIT; 1917 } 1918 1919 /* Set the hba model info */ 1920 (void) strcpy(port_info->pi_attrs.model, hba->model_info.model); 1921 (void) strcpy(port_info->pi_attrs.model_description, 1922 hba->model_info.model_desc); 1923 1924 1925 /* Log information */ 1926 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1927 "Bind info: port_num = %d", bind_info->port_num); 1928 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1929 "Bind info: port_handle = %p", bind_info->port_handle); 1930 1931 #if (EMLXS_MODREV >= EMLXS_MODREV5) 1932 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1933 "Bind info: port_npiv = %d", bind_info->port_npiv); 1934 #endif /* >= EMLXS_MODREV5 */ 1935 1936 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1937 "Port info: pi_topology = %x", port_info->pi_topology); 1938 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1939 "Port info: pi_error = %x", port_info->pi_error); 1940 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1941 "Port info: pi_port_state = %x", port_info->pi_port_state); 1942 1943 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1944 "Port info: port_id = %x", port_info->pi_s_id.port_id); 1945 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1946 "Port info: priv_lilp_posit = %x", 1947 port_info->pi_s_id.priv_lilp_posit); 1948 1949 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1950 "Port info: hard_addr = %x", 1951 port_info->pi_hard_addr.hard_addr); 1952 1953 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1954 "Port info: rnid.status = %x", 1955 port_info->pi_rnid_params.status); 1956 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1957 "Port info: rnid.global_id = %16s", 1958 port_info->pi_rnid_params.params.global_id); 1959 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1960 "Port info: rnid.unit_type = %x", 1961 port_info->pi_rnid_params.params.unit_type); 1962 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1963 "Port info: rnid.port_id = %x", 1964 port_info->pi_rnid_params.params.port_id); 1965 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1966 "Port info: rnid.num_attached = %x", 1967 port_info->pi_rnid_params.params.num_attached); 1968 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1969 "Port info: rnid.ip_version = %x", 1970 port_info->pi_rnid_params.params.ip_version); 1971 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1972 "Port info: rnid.udp_port = %x", 1973 port_info->pi_rnid_params.params.udp_port); 1974 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1975 "Port info: rnid.ip_addr = %16s", 1976 port_info->pi_rnid_params.params.ip_addr); 1977 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1978 "Port info: rnid.spec_id_resv = %x", 1979 port_info->pi_rnid_params.params.specific_id_resv); 1980 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1981 "Port info: rnid.topo_flags = %x", 1982 port_info->pi_rnid_params.params.topo_flags); 1983 1984 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1985 "Port info: manufacturer = %s", 1986 port_info->pi_attrs.manufacturer); 1987 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1988 "Port info: serial_num = %s", 1989 port_info->pi_attrs.serial_number); 1990 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1991 "Port info: model = %s", port_info->pi_attrs.model); 1992 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1993 "Port info: model_description = %s", 1994 port_info->pi_attrs.model_description); 1995 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1996 "Port info: hardware_version = %s", 1997 port_info->pi_attrs.hardware_version); 1998 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 1999 "Port info: driver_version = %s", 2000 port_info->pi_attrs.driver_version); 2001 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2002 "Port info: option_rom_version = %s", 2003 port_info->pi_attrs.option_rom_version); 2004 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2005 "Port info: firmware_version = %s", 2006 port_info->pi_attrs.firmware_version); 2007 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2008 "Port info: driver_name = %s", 2009 port_info->pi_attrs.driver_name); 2010 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2011 "Port info: vendor_specific_id = %x", 2012 port_info->pi_attrs.vendor_specific_id); 2013 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2014 "Port info: supported_cos = %x", 2015 port_info->pi_attrs.supported_cos); 2016 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2017 "Port info: supported_speed = %x", 2018 port_info->pi_attrs.supported_speed); 2019 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2020 "Port info: max_frame_size = %x", 2021 port_info->pi_attrs.max_frame_size); 2022 2023 #if (EMLXS_MODREV >= EMLXS_MODREV3) 2024 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2025 "Port info: fru_port_index = %x", 2026 port_info->pi_attrs.hba_fru_details.port_index); 2027 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2028 "Port info: fru_high = %llx", 2029 port_info->pi_attrs.hba_fru_details.high); 2030 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2031 "Port info: fru_low = %llx", 2032 port_info->pi_attrs.hba_fru_details.low); 2033 #endif /* >= EMLXS_MODREV3 */ 2034 2035 #if (EMLXS_MODREV >= EMLXS_MODREV4) 2036 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2037 "Port info: sym_node_name = %s", 2038 port_info->pi_attrs.sym_node_name); 2039 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 2040 "Port info: sym_port_name = %s", 2041 port_info->pi_attrs.sym_port_name); 2042 #endif /* >= EMLXS_MODREV4 */ 2043 2044 /* Set the bound flag */ 2045 port->flag |= EMLXS_PORT_BOUND; 2046 hba->num_of_ports++; 2047 2048 mutex_exit(&EMLXS_PORT_LOCK); 2049 2050 return ((opaque_t)port); 2051 2052 } /* emlxs_bind_port() */ 2053 2054 2055 static void 2056 emlxs_unbind_port(opaque_t fca_port_handle) 2057 { 2058 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 2059 emlxs_hba_t *hba = HBA; 2060 2061 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2062 "fca_unbind_port: port=%p", port); 2063 2064 /* Destroy & flush all port nodes, if they exist */ 2065 if (port->node_count) { 2066 if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) { 2067 (void) emlxs_sli4_unreg_all_rpi_by_port(port); 2068 } else { 2069 (void) emlxs_mb_unreg_rpi(port, 0xffff, 0, 0, 0); 2070 } 2071 } 2072 2073 #if (EMLXS_MODREV >= EMLXS_MODREV5) 2074 if ((hba->flag & FC_NPIV_ENABLED) && 2075 (port->flag & (EMLXS_PORT_CONFIG | EMLXS_PORT_ENABLE))) { 2076 (void) emlxs_mb_unreg_vpi(port); 2077 } 2078 #endif 2079 2080 mutex_enter(&EMLXS_PORT_LOCK); 2081 2082 if (!(port->flag & EMLXS_PORT_BOUND)) { 2083 mutex_exit(&EMLXS_PORT_LOCK); 2084 return; 2085 } 2086 2087 port->flag &= ~EMLXS_PORT_BOUND; 2088 hba->num_of_ports--; 2089 2090 port->ulp_handle = 0; 2091 port->ulp_statec = FC_STATE_OFFLINE; 2092 port->ulp_statec_cb = NULL; 2093 port->ulp_unsol_cb = NULL; 2094 2095 mutex_exit(&EMLXS_PORT_LOCK); 2096 2097 return; 2098 2099 } /* emlxs_unbind_port() */ 2100 2101 2102 /*ARGSUSED*/ 2103 extern int 2104 emlxs_pkt_init(opaque_t fca_port_handle, fc_packet_t *pkt, int32_t sleep) 2105 { 2106 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 2107 emlxs_hba_t *hba = HBA; 2108 emlxs_buf_t *sbp = (emlxs_buf_t *)pkt->pkt_fca_private; 2109 2110 if (!sbp) { 2111 return (FC_FAILURE); 2112 } 2113 bzero((void *)sbp, sizeof (emlxs_buf_t)); 2114 2115 mutex_init(&sbp->mtx, NULL, MUTEX_DRIVER, (void *)hba->intr_arg); 2116 sbp->pkt_flags = 2117 PACKET_VALID | PACKET_ULP_OWNED; 2118 sbp->port = port; 2119 sbp->pkt = pkt; 2120 sbp->iocbq.sbp = sbp; 2121 2122 return (FC_SUCCESS); 2123 2124 } /* emlxs_pkt_init() */ 2125 2126 2127 2128 static void 2129 emlxs_initialize_pkt(emlxs_port_t *port, emlxs_buf_t *sbp) 2130 { 2131 emlxs_hba_t *hba = HBA; 2132 emlxs_config_t *cfg = &CFG; 2133 fc_packet_t *pkt = PRIV2PKT(sbp); 2134 uint32_t *iptr; 2135 2136 mutex_enter(&sbp->mtx); 2137 2138 /* Reinitialize */ 2139 sbp->pkt = pkt; 2140 sbp->port = port; 2141 sbp->bmp = NULL; 2142 sbp->pkt_flags &= (PACKET_VALID | PACKET_ALLOCATED); 2143 sbp->iotag = 0; 2144 sbp->ticks = 0; 2145 sbp->abort_attempts = 0; 2146 sbp->fpkt = NULL; 2147 sbp->flush_count = 0; 2148 sbp->next = NULL; 2149 2150 if (!port->tgt_mode) { 2151 sbp->node = NULL; 2152 sbp->did = 0; 2153 sbp->lun = 0; 2154 sbp->class = 0; 2155 sbp->class = 0; 2156 sbp->channel = NULL; 2157 } 2158 2159 bzero((void *)&sbp->iocbq, sizeof (IOCBQ)); 2160 sbp->iocbq.sbp = sbp; 2161 2162 if ((pkt->pkt_tran_flags & FC_TRAN_NO_INTR) || !pkt->pkt_comp || 2163 ddi_in_panic()) { 2164 sbp->pkt_flags |= PACKET_POLLED; 2165 } 2166 2167 /* Prepare the fc packet */ 2168 pkt->pkt_state = FC_PKT_SUCCESS; 2169 pkt->pkt_reason = 0; 2170 pkt->pkt_action = 0; 2171 pkt->pkt_expln = 0; 2172 pkt->pkt_data_resid = 0; 2173 pkt->pkt_resp_resid = 0; 2174 2175 /* Make sure all pkt's have a proper timeout */ 2176 if (!cfg[CFG_TIMEOUT_ENABLE].current) { 2177 /* This disables all IOCB on chip timeouts */ 2178 pkt->pkt_timeout = 0x80000000; 2179 } else if (pkt->pkt_timeout == 0 || pkt->pkt_timeout == 0xffffffff) { 2180 pkt->pkt_timeout = 60; 2181 } 2182 2183 /* Clear the response buffer */ 2184 if (pkt->pkt_rsplen) { 2185 /* Check for FCP commands */ 2186 if ((pkt->pkt_tran_type == FC_PKT_FCP_READ) || 2187 (pkt->pkt_tran_type == FC_PKT_FCP_WRITE)) { 2188 iptr = (uint32_t *)pkt->pkt_resp; 2189 iptr[2] = 0; 2190 iptr[3] = 0; 2191 } else { 2192 bzero(pkt->pkt_resp, pkt->pkt_rsplen); 2193 } 2194 } 2195 2196 mutex_exit(&sbp->mtx); 2197 2198 return; 2199 2200 } /* emlxs_initialize_pkt() */ 2201 2202 2203 2204 /* 2205 * We may not need this routine 2206 */ 2207 /*ARGSUSED*/ 2208 extern int 2209 emlxs_pkt_uninit(opaque_t fca_port_handle, fc_packet_t *pkt) 2210 { 2211 emlxs_buf_t *sbp = PKT2PRIV(pkt); 2212 2213 if (!sbp) { 2214 return (FC_FAILURE); 2215 } 2216 2217 if (!(sbp->pkt_flags & PACKET_VALID)) { 2218 return (FC_FAILURE); 2219 } 2220 sbp->pkt_flags &= ~PACKET_VALID; 2221 mutex_destroy(&sbp->mtx); 2222 2223 return (FC_SUCCESS); 2224 2225 } /* emlxs_pkt_uninit() */ 2226 2227 2228 static int 2229 emlxs_get_cap(opaque_t fca_port_handle, char *cap, void *ptr) 2230 { 2231 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 2232 emlxs_hba_t *hba = HBA; 2233 int32_t rval; 2234 2235 if (!(port->flag & EMLXS_PORT_BOUND)) { 2236 return (FC_CAP_ERROR); 2237 } 2238 2239 if (strcmp(cap, FC_NODE_WWN) == 0) { 2240 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2241 "fca_get_cap: FC_NODE_WWN"); 2242 2243 bcopy((void *)&hba->wwnn, (void *)ptr, sizeof (NAME_TYPE)); 2244 rval = FC_CAP_FOUND; 2245 2246 } else if (strcmp(cap, FC_LOGIN_PARAMS) == 0) { 2247 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2248 "fca_get_cap: FC_LOGIN_PARAMS"); 2249 2250 /* 2251 * We need to turn off CLASS2 support. 2252 * Otherwise, FC transport will use CLASS2 as default class 2253 * and never try with CLASS3. 2254 */ 2255 hba->sparam.cls2.classValid = 0; 2256 2257 bcopy((void *)&hba->sparam, (void *)ptr, sizeof (SERV_PARM)); 2258 2259 rval = FC_CAP_FOUND; 2260 2261 } else if (strcmp(cap, FC_CAP_UNSOL_BUF) == 0) { 2262 int32_t *num_bufs; 2263 emlxs_config_t *cfg = &CFG; 2264 2265 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2266 "fca_get_cap: FC_CAP_UNSOL_BUF (%d)", 2267 cfg[CFG_UB_BUFS].current); 2268 2269 num_bufs = (int32_t *)ptr; 2270 2271 /* We multiply by MAX_VPORTS because ULP uses a */ 2272 /* formula to calculate ub bufs from this */ 2273 *num_bufs = (cfg[CFG_UB_BUFS].current * MAX_VPORTS); 2274 2275 rval = FC_CAP_FOUND; 2276 2277 } else if (strcmp(cap, FC_CAP_PAYLOAD_SIZE) == 0) { 2278 int32_t *size; 2279 2280 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2281 "fca_get_cap: FC_CAP_PAYLOAD_SIZE"); 2282 2283 size = (int32_t *)ptr; 2284 *size = -1; 2285 rval = FC_CAP_FOUND; 2286 2287 } else if (strcmp(cap, FC_CAP_POST_RESET_BEHAVIOR) == 0) { 2288 fc_reset_action_t *action; 2289 2290 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2291 "fca_get_cap: FC_CAP_POST_RESET_BEHAVIOR"); 2292 2293 action = (fc_reset_action_t *)ptr; 2294 *action = FC_RESET_RETURN_ALL; 2295 rval = FC_CAP_FOUND; 2296 2297 } else if (strcmp(cap, FC_CAP_NOSTREAM_ON_UNALIGN_BUF) == 0) { 2298 fc_dma_behavior_t *behavior; 2299 2300 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2301 "fca_get_cap: FC_CAP_NOSTREAM_ON_UNALIGN_BUF"); 2302 2303 behavior = (fc_dma_behavior_t *)ptr; 2304 *behavior = FC_ALLOW_STREAMING; 2305 rval = FC_CAP_FOUND; 2306 2307 } else if (strcmp(cap, FC_CAP_FCP_DMA) == 0) { 2308 fc_fcp_dma_t *fcp_dma; 2309 2310 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2311 "fca_get_cap: FC_CAP_FCP_DMA"); 2312 2313 fcp_dma = (fc_fcp_dma_t *)ptr; 2314 *fcp_dma = FC_DVMA_SPACE; 2315 rval = FC_CAP_FOUND; 2316 2317 } else { 2318 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2319 "fca_get_cap: Unknown capability. [%s]", cap); 2320 2321 rval = FC_CAP_ERROR; 2322 2323 } 2324 2325 return (rval); 2326 2327 } /* emlxs_get_cap() */ 2328 2329 2330 2331 static int 2332 emlxs_set_cap(opaque_t fca_port_handle, char *cap, void *ptr) 2333 { 2334 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 2335 2336 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2337 "fca_set_cap: cap=[%s] arg=%p", cap, ptr); 2338 2339 return (FC_CAP_ERROR); 2340 2341 } /* emlxs_set_cap() */ 2342 2343 2344 static opaque_t 2345 emlxs_get_device(opaque_t fca_port_handle, fc_portid_t d_id) 2346 { 2347 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 2348 2349 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2350 "fca_get_device: did=%x", d_id.port_id); 2351 2352 return (NULL); 2353 2354 } /* emlxs_get_device() */ 2355 2356 2357 static int32_t 2358 emlxs_notify(opaque_t fca_port_handle, uint32_t cmd) 2359 { 2360 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 2361 2362 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, "fca_notify: cmd=%x", 2363 cmd); 2364 2365 return (FC_SUCCESS); 2366 2367 } /* emlxs_notify */ 2368 2369 2370 2371 static int 2372 emlxs_get_map(opaque_t fca_port_handle, fc_lilpmap_t *mapbuf) 2373 { 2374 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 2375 emlxs_hba_t *hba = HBA; 2376 uint32_t lilp_length; 2377 2378 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2379 "fca_get_map: mapbuf=%p length=%d (%X,%X,%X,%X)", mapbuf, 2380 port->alpa_map[0], port->alpa_map[1], port->alpa_map[2], 2381 port->alpa_map[3], port->alpa_map[4]); 2382 2383 if (!(port->flag & EMLXS_PORT_BOUND)) { 2384 return (FC_NOMAP); 2385 } 2386 2387 if (hba->topology != TOPOLOGY_LOOP) { 2388 return (FC_NOMAP); 2389 } 2390 2391 /* Check if alpa map is available */ 2392 if (port->alpa_map[0] != 0) { 2393 mapbuf->lilp_magic = MAGIC_LILP; 2394 } else { /* No LILP map available */ 2395 2396 /* Set lilp_magic to MAGIC_LISA and this will */ 2397 /* trigger an ALPA scan in ULP */ 2398 mapbuf->lilp_magic = MAGIC_LISA; 2399 } 2400 2401 mapbuf->lilp_myalpa = port->did; 2402 2403 /* The first byte of the alpa_map is the lilp map length */ 2404 /* Add one to include the lilp length byte itself */ 2405 lilp_length = (uint32_t)port->alpa_map[0] + 1; 2406 2407 /* Make sure the max transfer is 128 bytes */ 2408 if (lilp_length > 128) { 2409 lilp_length = 128; 2410 } 2411 2412 /* We start copying from the lilp_length field */ 2413 /* in order to get a word aligned address */ 2414 bcopy((void *)&port->alpa_map, (void *)&mapbuf->lilp_length, 2415 lilp_length); 2416 2417 return (FC_SUCCESS); 2418 2419 } /* emlxs_get_map() */ 2420 2421 2422 2423 extern int 2424 emlxs_transport(opaque_t fca_port_handle, fc_packet_t *pkt) 2425 { 2426 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 2427 emlxs_hba_t *hba = HBA; 2428 emlxs_buf_t *sbp; 2429 uint32_t rval; 2430 uint32_t pkt_flags; 2431 2432 /* Make sure adapter is online */ 2433 if (!(hba->flag & FC_ONLINE_MODE)) { 2434 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_failed_msg, 2435 "Adapter offline."); 2436 2437 return (FC_OFFLINE); 2438 } 2439 2440 /* Validate packet */ 2441 sbp = PKT2PRIV(pkt); 2442 2443 /* Make sure ULP was told that the port was online */ 2444 if ((port->ulp_statec == FC_STATE_OFFLINE) && 2445 !(sbp->pkt_flags & PACKET_ALLOCATED)) { 2446 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg, 2447 "Port offline."); 2448 2449 return (FC_OFFLINE); 2450 } 2451 2452 if (sbp->port != port) { 2453 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_error_msg, 2454 "Invalid port handle. sbp=%p port=%p flags=%x", sbp, 2455 sbp->port, sbp->pkt_flags); 2456 return (FC_BADPACKET); 2457 } 2458 2459 if (!(sbp->pkt_flags & (PACKET_VALID | PACKET_ULP_OWNED))) { 2460 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_error_msg, 2461 "Invalid packet flags. sbp=%p port=%p flags=%x", sbp, 2462 sbp->port, sbp->pkt_flags); 2463 return (FC_BADPACKET); 2464 } 2465 #ifdef SFCT_SUPPORT 2466 if (port->tgt_mode && !sbp->fct_cmd && 2467 !(sbp->pkt_flags & PACKET_ALLOCATED)) { 2468 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_error_msg, 2469 "Packet blocked. Target mode."); 2470 return (FC_TRANSPORT_ERROR); 2471 } 2472 #endif /* SFCT_SUPPORT */ 2473 2474 #ifdef IDLE_TIMER 2475 emlxs_pm_busy_component(hba); 2476 #endif /* IDLE_TIMER */ 2477 2478 /* Prepare the packet for transport */ 2479 emlxs_initialize_pkt(port, sbp); 2480 2481 /* Save a copy of the pkt flags. */ 2482 /* We will check the polling flag later */ 2483 pkt_flags = sbp->pkt_flags; 2484 2485 /* Send the packet */ 2486 switch (pkt->pkt_tran_type) { 2487 case FC_PKT_FCP_READ: 2488 case FC_PKT_FCP_WRITE: 2489 rval = emlxs_send_fcp_cmd(port, sbp); 2490 break; 2491 2492 case FC_PKT_IP_WRITE: 2493 case FC_PKT_BROADCAST: 2494 rval = emlxs_send_ip(port, sbp); 2495 break; 2496 2497 case FC_PKT_EXCHANGE: 2498 switch (pkt->pkt_cmd_fhdr.type) { 2499 case FC_TYPE_SCSI_FCP: 2500 rval = emlxs_send_fcp_cmd(port, sbp); 2501 break; 2502 2503 case FC_TYPE_FC_SERVICES: 2504 rval = emlxs_send_ct(port, sbp); 2505 break; 2506 2507 #ifdef MENLO_SUPPORT 2508 case EMLXS_MENLO_TYPE: 2509 rval = emlxs_send_menlo(port, sbp); 2510 break; 2511 #endif /* MENLO_SUPPORT */ 2512 2513 default: 2514 rval = emlxs_send_els(port, sbp); 2515 } 2516 break; 2517 2518 case FC_PKT_OUTBOUND: 2519 switch (pkt->pkt_cmd_fhdr.type) { 2520 #ifdef SFCT_SUPPORT 2521 case FC_TYPE_SCSI_FCP: 2522 rval = emlxs_send_fct_status(port, sbp); 2523 break; 2524 2525 case FC_TYPE_BASIC_LS: 2526 rval = emlxs_send_fct_abort(port, sbp); 2527 break; 2528 #endif /* SFCT_SUPPORT */ 2529 2530 case FC_TYPE_FC_SERVICES: 2531 rval = emlxs_send_ct_rsp(port, sbp); 2532 break; 2533 #ifdef MENLO_SUPPORT 2534 case EMLXS_MENLO_TYPE: 2535 rval = emlxs_send_menlo(port, sbp); 2536 break; 2537 #endif /* MENLO_SUPPORT */ 2538 2539 default: 2540 rval = emlxs_send_els_rsp(port, sbp); 2541 } 2542 break; 2543 2544 default: 2545 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_error_msg, 2546 "Unsupported pkt_tran_type. type=%x", pkt->pkt_tran_type); 2547 rval = FC_TRANSPORT_ERROR; 2548 break; 2549 } 2550 2551 /* Check if send was not successful */ 2552 if (rval != FC_SUCCESS) { 2553 /* Return packet to ULP */ 2554 mutex_enter(&sbp->mtx); 2555 sbp->pkt_flags |= PACKET_ULP_OWNED; 2556 mutex_exit(&sbp->mtx); 2557 2558 return (rval); 2559 } 2560 2561 /* Check if this packet should be polled for completion before */ 2562 /* returning. This check must be done with a saved copy of the */ 2563 /* pkt_flags because the packet itself could already be freed from */ 2564 /* memory if it was not polled. */ 2565 if (pkt_flags & PACKET_POLLED) { 2566 emlxs_poll(port, sbp); 2567 } 2568 2569 return (FC_SUCCESS); 2570 2571 } /* emlxs_transport() */ 2572 2573 2574 2575 static void 2576 emlxs_poll(emlxs_port_t *port, emlxs_buf_t *sbp) 2577 { 2578 emlxs_hba_t *hba = HBA; 2579 fc_packet_t *pkt = PRIV2PKT(sbp); 2580 clock_t timeout; 2581 clock_t time; 2582 uint32_t att_bit; 2583 CHANNEL *cp; 2584 int in_panic = 0; 2585 2586 mutex_enter(&EMLXS_PORT_LOCK); 2587 hba->io_poll_count++; 2588 mutex_exit(&EMLXS_PORT_LOCK); 2589 2590 /* Check for panic situation */ 2591 cp = (CHANNEL *)sbp->channel; 2592 2593 if (ddi_in_panic()) { 2594 in_panic = 1; 2595 /* 2596 * In panic situations there will be one thread with 2597 * no interrrupts (hard or soft) and no timers 2598 */ 2599 2600 /* 2601 * We must manually poll everything in this thread 2602 * to keep the driver going. 2603 */ 2604 if (hba->sli_mode == EMLXS_HBA_SLI3_MODE) { 2605 switch (cp->channelno) { 2606 case FC_FCP_RING: 2607 att_bit = HA_R0ATT; 2608 break; 2609 2610 case FC_IP_RING: 2611 att_bit = HA_R1ATT; 2612 break; 2613 2614 case FC_ELS_RING: 2615 att_bit = HA_R2ATT; 2616 break; 2617 2618 case FC_CT_RING: 2619 att_bit = HA_R3ATT; 2620 break; 2621 } 2622 } 2623 2624 /* Keep polling the chip until our IO is completed */ 2625 /* Driver's timer will not function during panics. */ 2626 /* Therefore, timer checks must be performed manually. */ 2627 (void) drv_getparm(LBOLT, &time); 2628 timeout = time + drv_usectohz(1000000); 2629 while (!(sbp->pkt_flags & PACKET_COMPLETED)) { 2630 if (hba->sli_mode == EMLXS_HBA_SLI3_MODE) { 2631 EMLXS_SLI_POLL_INTR(hba, att_bit); 2632 } else { 2633 EMLXS_SLI_POLL_INTR(hba, 0); 2634 } 2635 (void) drv_getparm(LBOLT, &time); 2636 2637 /* Trigger timer checks periodically */ 2638 if (time >= timeout) { 2639 emlxs_timer_checks(hba); 2640 timeout = time + drv_usectohz(1000000); 2641 } 2642 } 2643 } else { 2644 /* Wait for IO completion */ 2645 /* The driver's timer will detect */ 2646 /* any timeout and abort the I/O. */ 2647 mutex_enter(&EMLXS_PKT_LOCK); 2648 while (!(sbp->pkt_flags & PACKET_COMPLETED)) { 2649 cv_wait(&EMLXS_PKT_CV, &EMLXS_PKT_LOCK); 2650 } 2651 mutex_exit(&EMLXS_PKT_LOCK); 2652 } 2653 2654 /* Check for fcp reset pkt */ 2655 if (sbp->pkt_flags & PACKET_FCP_RESET) { 2656 if (sbp->pkt_flags & PACKET_FCP_TGT_RESET) { 2657 /* Flush the IO's on the chipq */ 2658 (void) emlxs_chipq_node_flush(port, 2659 &hba->chan[hba->channel_fcp], 2660 sbp->node, sbp); 2661 } else { 2662 /* Flush the IO's on the chipq for this lun */ 2663 (void) emlxs_chipq_lun_flush(port, 2664 sbp->node, sbp->lun, sbp); 2665 } 2666 2667 if (sbp->flush_count == 0) { 2668 emlxs_node_open(port, sbp->node, hba->channel_fcp); 2669 goto done; 2670 } 2671 2672 /* Set the timeout so the flush has time to complete */ 2673 timeout = emlxs_timeout(hba, 60); 2674 (void) drv_getparm(LBOLT, &time); 2675 while ((time < timeout) && sbp->flush_count > 0) { 2676 delay(drv_usectohz(500000)); 2677 (void) drv_getparm(LBOLT, &time); 2678 } 2679 2680 if (sbp->flush_count == 0) { 2681 emlxs_node_open(port, sbp->node, hba->channel_fcp); 2682 goto done; 2683 } 2684 2685 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_flush_timeout_msg, 2686 "sbp=%p flush_count=%d. Waiting...", sbp, 2687 sbp->flush_count); 2688 2689 /* Let's try this one more time */ 2690 2691 if (sbp->pkt_flags & PACKET_FCP_TGT_RESET) { 2692 /* Flush the IO's on the chipq */ 2693 (void) emlxs_chipq_node_flush(port, 2694 &hba->chan[hba->channel_fcp], 2695 sbp->node, sbp); 2696 } else { 2697 /* Flush the IO's on the chipq for this lun */ 2698 (void) emlxs_chipq_lun_flush(port, 2699 sbp->node, sbp->lun, sbp); 2700 } 2701 2702 /* Reset the timeout so the flush has time to complete */ 2703 timeout = emlxs_timeout(hba, 60); 2704 (void) drv_getparm(LBOLT, &time); 2705 while ((time < timeout) && sbp->flush_count > 0) { 2706 delay(drv_usectohz(500000)); 2707 (void) drv_getparm(LBOLT, &time); 2708 } 2709 2710 if (sbp->flush_count == 0) { 2711 emlxs_node_open(port, sbp->node, hba->channel_fcp); 2712 goto done; 2713 } 2714 2715 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_flush_timeout_msg, 2716 "sbp=%p flush_count=%d. Resetting link.", sbp, 2717 sbp->flush_count); 2718 2719 /* Let's first try to reset the link */ 2720 (void) emlxs_reset(port, FC_FCA_LINK_RESET); 2721 2722 if (sbp->flush_count == 0) { 2723 goto done; 2724 } 2725 2726 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_flush_timeout_msg, 2727 "sbp=%p flush_count=%d. Resetting HBA.", sbp, 2728 sbp->flush_count); 2729 2730 /* If that doesn't work, reset the adapter */ 2731 (void) emlxs_reset(port, FC_FCA_RESET); 2732 2733 if (sbp->flush_count != 0) { 2734 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_flush_timeout_msg, 2735 "sbp=%p flush_count=%d. Giving up.", sbp, 2736 sbp->flush_count); 2737 } 2738 2739 } 2740 /* PACKET_FCP_RESET */ 2741 done: 2742 2743 /* Packet has been declared completed and is now ready to be returned */ 2744 2745 #if (EMLXS_MODREVX == EMLXS_MODREV2X) 2746 emlxs_unswap_pkt(sbp); 2747 #endif /* EMLXS_MODREV2X */ 2748 2749 mutex_enter(&sbp->mtx); 2750 sbp->pkt_flags |= PACKET_ULP_OWNED; 2751 mutex_exit(&sbp->mtx); 2752 2753 mutex_enter(&EMLXS_PORT_LOCK); 2754 hba->io_poll_count--; 2755 mutex_exit(&EMLXS_PORT_LOCK); 2756 2757 #ifdef FMA_SUPPORT 2758 if (!in_panic) { 2759 emlxs_check_dma(hba, sbp); 2760 } 2761 #endif 2762 2763 /* Make ULP completion callback if required */ 2764 if (pkt->pkt_comp) { 2765 cp->ulpCmplCmd++; 2766 (*pkt->pkt_comp) (pkt); 2767 } 2768 2769 #ifdef FMA_SUPPORT 2770 if (hba->flag & FC_DMA_CHECK_ERROR) { 2771 emlxs_thread_spawn(hba, emlxs_restart_thread, 2772 NULL, NULL); 2773 } 2774 #endif 2775 2776 return; 2777 2778 } /* emlxs_poll() */ 2779 2780 2781 static int 2782 emlxs_ub_alloc(opaque_t fca_port_handle, uint64_t tokens[], uint32_t size, 2783 uint32_t *count, uint32_t type) 2784 { 2785 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 2786 emlxs_hba_t *hba = HBA; 2787 2788 char *err = NULL; 2789 emlxs_unsol_buf_t *pool; 2790 emlxs_unsol_buf_t *new_pool; 2791 int32_t i; 2792 int result; 2793 uint32_t free_resv; 2794 uint32_t free; 2795 emlxs_config_t *cfg = &CFG; 2796 fc_unsol_buf_t *ubp; 2797 emlxs_ub_priv_t *ub_priv; 2798 int rc; 2799 2800 if (port->tgt_mode) { 2801 if (tokens && count) { 2802 bzero(tokens, (sizeof (uint64_t) * (*count))); 2803 } 2804 return (FC_SUCCESS); 2805 } 2806 2807 if (!(port->flag & EMLXS_PORT_BOUND)) { 2808 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2809 "ub_alloc failed: Port not bound! size=%x count=%d " 2810 "type=%x", size, *count, type); 2811 2812 return (FC_FAILURE); 2813 } 2814 2815 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2816 "ub_alloc: size=%x count=%d type=%x", size, *count, type); 2817 2818 if (count && (*count > EMLXS_MAX_UBUFS)) { 2819 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, 2820 "ub_alloc failed: Too many unsolicted buffers requested. " 2821 "count=%x", *count); 2822 2823 return (FC_FAILURE); 2824 2825 } 2826 2827 if (tokens == NULL) { 2828 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, 2829 "ub_alloc failed: Token array is NULL."); 2830 2831 return (FC_FAILURE); 2832 } 2833 2834 /* Clear the token array */ 2835 bzero(tokens, (sizeof (uint64_t) * (*count))); 2836 2837 free_resv = 0; 2838 free = *count; 2839 switch (type) { 2840 case FC_TYPE_BASIC_LS: 2841 err = "BASIC_LS"; 2842 break; 2843 case FC_TYPE_EXTENDED_LS: 2844 err = "EXTENDED_LS"; 2845 free = *count / 2; /* Hold 50% for normal use */ 2846 free_resv = *count - free; /* Reserve 50% for RSCN use */ 2847 break; 2848 case FC_TYPE_IS8802: 2849 err = "IS8802"; 2850 break; 2851 case FC_TYPE_IS8802_SNAP: 2852 err = "IS8802_SNAP"; 2853 2854 if (cfg[CFG_NETWORK_ON].current == 0) { 2855 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 2856 "ub_alloc failed: IP support is disabled."); 2857 2858 return (FC_FAILURE); 2859 } 2860 break; 2861 case FC_TYPE_SCSI_FCP: 2862 err = "SCSI_FCP"; 2863 break; 2864 case FC_TYPE_SCSI_GPP: 2865 err = "SCSI_GPP"; 2866 break; 2867 case FC_TYPE_HIPP_FP: 2868 err = "HIPP_FP"; 2869 break; 2870 case FC_TYPE_IPI3_MASTER: 2871 err = "IPI3_MASTER"; 2872 break; 2873 case FC_TYPE_IPI3_SLAVE: 2874 err = "IPI3_SLAVE"; 2875 break; 2876 case FC_TYPE_IPI3_PEER: 2877 err = "IPI3_PEER"; 2878 break; 2879 case FC_TYPE_FC_SERVICES: 2880 err = "FC_SERVICES"; 2881 break; 2882 } 2883 2884 mutex_enter(&EMLXS_UB_LOCK); 2885 2886 /* 2887 * Walk through the list of the unsolicited buffers 2888 * for this ddiinst of emlx. 2889 */ 2890 2891 pool = port->ub_pool; 2892 2893 /* 2894 * The emlxs_ub_alloc() can be called more than once with different 2895 * size. We will reject the call if there are 2896 * duplicate size with the same FC-4 type. 2897 */ 2898 while (pool) { 2899 if ((pool->pool_type == type) && 2900 (pool->pool_buf_size == size)) { 2901 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, 2902 "ub_alloc failed: Unsolicited buffer pool for %s " 2903 "of size 0x%x bytes already exists.", err, size); 2904 2905 result = FC_FAILURE; 2906 goto fail; 2907 } 2908 2909 pool = pool->pool_next; 2910 } 2911 2912 mutex_exit(&EMLXS_UB_LOCK); 2913 2914 new_pool = (emlxs_unsol_buf_t *)kmem_zalloc(sizeof (emlxs_unsol_buf_t), 2915 KM_SLEEP); 2916 2917 new_pool->pool_next = NULL; 2918 new_pool->pool_type = type; 2919 new_pool->pool_buf_size = size; 2920 new_pool->pool_nentries = *count; 2921 new_pool->pool_available = new_pool->pool_nentries; 2922 new_pool->pool_free = free; 2923 new_pool->pool_free_resv = free_resv; 2924 new_pool->fc_ubufs = 2925 kmem_zalloc((sizeof (fc_unsol_buf_t) * (*count)), KM_SLEEP); 2926 2927 new_pool->pool_first_token = port->ub_count; 2928 new_pool->pool_last_token = port->ub_count + new_pool->pool_nentries; 2929 2930 for (i = 0; i < new_pool->pool_nentries; i++) { 2931 ubp = (fc_unsol_buf_t *)&new_pool->fc_ubufs[i]; 2932 ubp->ub_port_handle = port->ulp_handle; 2933 ubp->ub_token = (uint64_t)((unsigned long)ubp); 2934 ubp->ub_bufsize = size; 2935 ubp->ub_class = FC_TRAN_CLASS3; 2936 ubp->ub_port_private = NULL; 2937 ubp->ub_fca_private = 2938 (emlxs_ub_priv_t *)kmem_zalloc(sizeof (emlxs_ub_priv_t), 2939 KM_SLEEP); 2940 2941 /* 2942 * Initialize emlxs_ub_priv_t 2943 */ 2944 ub_priv = ubp->ub_fca_private; 2945 ub_priv->ubp = ubp; 2946 ub_priv->port = port; 2947 ub_priv->flags = EMLXS_UB_FREE; 2948 ub_priv->available = 1; 2949 ub_priv->pool = new_pool; 2950 ub_priv->time = 0; 2951 ub_priv->timeout = 0; 2952 ub_priv->token = port->ub_count; 2953 ub_priv->cmd = 0; 2954 2955 /* Allocate the actual buffer */ 2956 ubp->ub_buffer = (caddr_t)kmem_zalloc(size, KM_SLEEP); 2957 2958 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_detail_msg, 2959 "ub_alloc: buffer=%p token=%x size=%x type=%x ", ubp, 2960 ub_priv->token, ubp->ub_bufsize, type); 2961 2962 tokens[i] = (uint64_t)((unsigned long)ubp); 2963 port->ub_count++; 2964 } 2965 2966 mutex_enter(&EMLXS_UB_LOCK); 2967 2968 /* Add the pool to the top of the pool list */ 2969 new_pool->pool_prev = NULL; 2970 new_pool->pool_next = port->ub_pool; 2971 2972 if (port->ub_pool) { 2973 port->ub_pool->pool_prev = new_pool; 2974 } 2975 port->ub_pool = new_pool; 2976 2977 /* Set the post counts */ 2978 if (type == FC_TYPE_IS8802_SNAP) { 2979 MAILBOXQ *mbox; 2980 2981 port->ub_post[hba->channel_ip] += new_pool->pool_nentries; 2982 2983 if ((mbox = (MAILBOXQ *)emlxs_mem_get(hba, 2984 MEM_MBOX, 1))) { 2985 emlxs_mb_config_farp(hba, mbox); 2986 rc = EMLXS_SLI_ISSUE_MBOX_CMD(hba, 2987 mbox, MBX_NOWAIT, 0); 2988 if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) { 2989 (void) emlxs_mem_put(hba, MEM_MBOX, 2990 (uint8_t *)mbox); 2991 } 2992 } 2993 port->flag |= EMLXS_PORT_IP_UP; 2994 } else if (type == FC_TYPE_EXTENDED_LS) { 2995 port->ub_post[hba->channel_els] += new_pool->pool_nentries; 2996 } else if (type == FC_TYPE_FC_SERVICES) { 2997 port->ub_post[hba->channel_ct] += new_pool->pool_nentries; 2998 } 2999 3000 mutex_exit(&EMLXS_UB_LOCK); 3001 3002 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 3003 "%d unsolicited buffers allocated for %s of size 0x%x bytes.", 3004 *count, err, size); 3005 3006 return (FC_SUCCESS); 3007 3008 fail: 3009 3010 /* Clean the pool */ 3011 for (i = 0; tokens[i] != NULL; i++) { 3012 /* Get the buffer object */ 3013 ubp = (fc_unsol_buf_t *)((unsigned long)tokens[i]); 3014 ub_priv = (emlxs_ub_priv_t *)ubp->ub_fca_private; 3015 3016 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_detail_msg, 3017 "ub_alloc failed: Freed buffer=%p token=%x size=%x " 3018 "type=%x ", ubp, ub_priv->token, ubp->ub_bufsize, type); 3019 3020 /* Free the actual buffer */ 3021 kmem_free(ubp->ub_buffer, ubp->ub_bufsize); 3022 3023 /* Free the private area of the buffer object */ 3024 kmem_free(ubp->ub_fca_private, sizeof (emlxs_ub_priv_t)); 3025 3026 tokens[i] = 0; 3027 port->ub_count--; 3028 } 3029 3030 /* Free the array of buffer objects in the pool */ 3031 kmem_free((caddr_t)new_pool->fc_ubufs, 3032 (sizeof (fc_unsol_buf_t) * new_pool->pool_nentries)); 3033 3034 /* Free the pool object */ 3035 kmem_free((caddr_t)new_pool, sizeof (emlxs_unsol_buf_t)); 3036 3037 mutex_exit(&EMLXS_UB_LOCK); 3038 3039 return (result); 3040 3041 } /* emlxs_ub_alloc() */ 3042 3043 3044 static void 3045 emlxs_ub_els_reject(emlxs_port_t *port, fc_unsol_buf_t *ubp) 3046 { 3047 emlxs_hba_t *hba = HBA; 3048 emlxs_ub_priv_t *ub_priv; 3049 fc_packet_t *pkt; 3050 ELS_PKT *els; 3051 uint32_t sid; 3052 3053 ub_priv = (emlxs_ub_priv_t *)ubp->ub_fca_private; 3054 3055 if (hba->state <= FC_LINK_DOWN) { 3056 return; 3057 } 3058 3059 if (!(pkt = emlxs_pkt_alloc(port, sizeof (uint32_t) + 3060 sizeof (LS_RJT), 0, 0, KM_NOSLEEP))) { 3061 return; 3062 } 3063 3064 sid = LE_SWAP24_LO(ubp->ub_frame.s_id); 3065 3066 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_unsol_els_msg, 3067 "%s dropped: sid=%x. Rejecting.", 3068 emlxs_elscmd_xlate(ub_priv->cmd), sid); 3069 3070 pkt->pkt_tran_type = FC_PKT_OUTBOUND; 3071 pkt->pkt_timeout = (2 * hba->fc_ratov); 3072 3073 if ((uint32_t)ubp->ub_class == FC_TRAN_CLASS2) { 3074 pkt->pkt_tran_flags &= ~FC_TRAN_CLASS3; 3075 pkt->pkt_tran_flags |= FC_TRAN_CLASS2; 3076 } 3077 3078 /* Build the fc header */ 3079 pkt->pkt_cmd_fhdr.d_id = ubp->ub_frame.s_id; 3080 pkt->pkt_cmd_fhdr.r_ctl = 3081 R_CTL_EXTENDED_SVC | R_CTL_SOLICITED_CONTROL; 3082 pkt->pkt_cmd_fhdr.s_id = LE_SWAP24_LO(port->did); 3083 pkt->pkt_cmd_fhdr.type = FC_TYPE_EXTENDED_LS; 3084 pkt->pkt_cmd_fhdr.f_ctl = 3085 F_CTL_XCHG_CONTEXT | F_CTL_LAST_SEQ | F_CTL_END_SEQ; 3086 pkt->pkt_cmd_fhdr.seq_id = 0; 3087 pkt->pkt_cmd_fhdr.df_ctl = 0; 3088 pkt->pkt_cmd_fhdr.seq_cnt = 0; 3089 pkt->pkt_cmd_fhdr.ox_id = (ub_priv->cmd >> ELS_CMD_SHIFT) & 0xff; 3090 pkt->pkt_cmd_fhdr.rx_id = ubp->ub_frame.rx_id; 3091 pkt->pkt_cmd_fhdr.ro = 0; 3092 3093 /* Build the command */ 3094 els = (ELS_PKT *) pkt->pkt_cmd; 3095 els->elsCode = 0x01; 3096 els->un.lsRjt.un.b.lsRjtRsvd0 = 0; 3097 els->un.lsRjt.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; 3098 els->un.lsRjt.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE; 3099 els->un.lsRjt.un.b.vendorUnique = 0x02; 3100 3101 /* Send the pkt later in another thread */ 3102 (void) emlxs_pkt_send(pkt, 0); 3103 3104 return; 3105 3106 } /* emlxs_ub_els_reject() */ 3107 3108 extern int 3109 emlxs_ub_release(opaque_t fca_port_handle, uint32_t count, uint64_t tokens[]) 3110 { 3111 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 3112 emlxs_hba_t *hba = HBA; 3113 fc_unsol_buf_t *ubp; 3114 emlxs_ub_priv_t *ub_priv; 3115 uint32_t i; 3116 uint32_t time; 3117 emlxs_unsol_buf_t *pool; 3118 3119 if (count == 0) { 3120 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3121 "ub_release: Nothing to do. count=%d", count); 3122 3123 return (FC_SUCCESS); 3124 } 3125 3126 if (!(port->flag & EMLXS_PORT_BOUND)) { 3127 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3128 "ub_release failed: Port not bound. count=%d token[0]=%p", 3129 count, tokens[0]); 3130 3131 return (FC_UNBOUND); 3132 } 3133 3134 mutex_enter(&EMLXS_UB_LOCK); 3135 3136 if (!port->ub_pool) { 3137 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3138 "ub_release failed: No pools! count=%d token[0]=%p", 3139 count, tokens[0]); 3140 3141 mutex_exit(&EMLXS_UB_LOCK); 3142 return (FC_UB_BADTOKEN); 3143 } 3144 3145 for (i = 0; i < count; i++) { 3146 ubp = (fc_unsol_buf_t *)((unsigned long)tokens[i]); 3147 3148 if (!ubp) { 3149 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3150 "ub_release failed: count=%d tokens[%d]=0", count, 3151 i); 3152 3153 mutex_exit(&EMLXS_UB_LOCK); 3154 return (FC_UB_BADTOKEN); 3155 } 3156 3157 ub_priv = (emlxs_ub_priv_t *)ubp->ub_fca_private; 3158 3159 if (!ub_priv || (ub_priv == (emlxs_ub_priv_t *)DEAD_PTR)) { 3160 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3161 "ub_release failed: Dead buffer found. ubp=%p", 3162 ubp); 3163 3164 mutex_exit(&EMLXS_UB_LOCK); 3165 return (FC_UB_BADTOKEN); 3166 } 3167 3168 if (ub_priv->flags == EMLXS_UB_FREE) { 3169 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3170 "ub_release: Buffer already free! ubp=%p token=%x", 3171 ubp, ub_priv->token); 3172 3173 continue; 3174 } 3175 3176 /* Check for dropped els buffer */ 3177 /* ULP will do this sometimes without sending a reply */ 3178 if ((ubp->ub_frame.r_ctl == FC_ELS_REQ) && 3179 !(ub_priv->flags & EMLXS_UB_REPLY)) { 3180 emlxs_ub_els_reject(port, ubp); 3181 } 3182 3183 /* Mark the buffer free */ 3184 ub_priv->flags = EMLXS_UB_FREE; 3185 bzero(ubp->ub_buffer, ubp->ub_bufsize); 3186 3187 time = hba->timer_tics - ub_priv->time; 3188 ub_priv->time = 0; 3189 ub_priv->timeout = 0; 3190 3191 pool = ub_priv->pool; 3192 3193 if (ub_priv->flags & EMLXS_UB_RESV) { 3194 pool->pool_free_resv++; 3195 } else { 3196 pool->pool_free++; 3197 } 3198 3199 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_detail_msg, 3200 "ub_release: ubp=%p token=%x time=%d av=%d (%d,%d,%d,%d)", 3201 ubp, ub_priv->token, time, ub_priv->available, 3202 pool->pool_nentries, pool->pool_available, 3203 pool->pool_free, pool->pool_free_resv); 3204 3205 /* Check if pool can be destroyed now */ 3206 if ((pool->pool_available == 0) && 3207 (pool->pool_free + pool->pool_free_resv == 3208 pool->pool_nentries)) { 3209 emlxs_ub_destroy(port, pool); 3210 } 3211 } 3212 3213 mutex_exit(&EMLXS_UB_LOCK); 3214 3215 return (FC_SUCCESS); 3216 3217 } /* emlxs_ub_release() */ 3218 3219 3220 static int 3221 emlxs_ub_free(opaque_t fca_port_handle, uint32_t count, uint64_t tokens[]) 3222 { 3223 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 3224 emlxs_unsol_buf_t *pool; 3225 fc_unsol_buf_t *ubp; 3226 emlxs_ub_priv_t *ub_priv; 3227 uint32_t i; 3228 3229 if (port->tgt_mode) { 3230 return (FC_SUCCESS); 3231 } 3232 3233 if (count == 0) { 3234 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3235 "ub_free: Nothing to do. count=%d token[0]=%p", count, 3236 tokens[0]); 3237 3238 return (FC_SUCCESS); 3239 } 3240 3241 if (!(port->flag & EMLXS_PORT_BOUND)) { 3242 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3243 "ub_free: Port not bound. count=%d token[0]=%p", count, 3244 tokens[0]); 3245 3246 return (FC_SUCCESS); 3247 } 3248 3249 mutex_enter(&EMLXS_UB_LOCK); 3250 3251 if (!port->ub_pool) { 3252 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3253 "ub_free failed: No pools! count=%d token[0]=%p", count, 3254 tokens[0]); 3255 3256 mutex_exit(&EMLXS_UB_LOCK); 3257 return (FC_UB_BADTOKEN); 3258 } 3259 3260 /* Process buffer list */ 3261 for (i = 0; i < count; i++) { 3262 ubp = (fc_unsol_buf_t *)((unsigned long)tokens[i]); 3263 3264 if (!ubp) { 3265 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3266 "ub_free failed: count=%d tokens[%d]=0", count, 3267 i); 3268 3269 mutex_exit(&EMLXS_UB_LOCK); 3270 return (FC_UB_BADTOKEN); 3271 } 3272 3273 /* Mark buffer unavailable */ 3274 ub_priv = (emlxs_ub_priv_t *)ubp->ub_fca_private; 3275 3276 if (!ub_priv || (ub_priv == (emlxs_ub_priv_t *)DEAD_PTR)) { 3277 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3278 "ub_free failed: Dead buffer found. ubp=%p", ubp); 3279 3280 mutex_exit(&EMLXS_UB_LOCK); 3281 return (FC_UB_BADTOKEN); 3282 } 3283 3284 ub_priv->available = 0; 3285 3286 /* Mark one less buffer available in the parent pool */ 3287 pool = ub_priv->pool; 3288 3289 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_detail_msg, 3290 "ub_free: ubp=%p token=%x (%d,%d,%d,%d)", ubp, 3291 ub_priv->token, pool->pool_nentries, 3292 pool->pool_available - 1, pool->pool_free, 3293 pool->pool_free_resv); 3294 3295 if (pool->pool_available) { 3296 pool->pool_available--; 3297 3298 /* Check if pool can be destroyed */ 3299 if ((pool->pool_available == 0) && 3300 (pool->pool_free + pool->pool_free_resv == 3301 pool->pool_nentries)) { 3302 emlxs_ub_destroy(port, pool); 3303 } 3304 } 3305 } 3306 3307 mutex_exit(&EMLXS_UB_LOCK); 3308 3309 return (FC_SUCCESS); 3310 3311 } /* emlxs_ub_free() */ 3312 3313 3314 /* EMLXS_UB_LOCK must be held when calling this routine */ 3315 extern void 3316 emlxs_ub_destroy(emlxs_port_t *port, emlxs_unsol_buf_t *pool) 3317 { 3318 emlxs_hba_t *hba = HBA; 3319 emlxs_unsol_buf_t *next; 3320 emlxs_unsol_buf_t *prev; 3321 fc_unsol_buf_t *ubp; 3322 uint32_t i; 3323 3324 /* Remove the pool object from the pool list */ 3325 next = pool->pool_next; 3326 prev = pool->pool_prev; 3327 3328 if (port->ub_pool == pool) { 3329 port->ub_pool = next; 3330 } 3331 3332 if (prev) { 3333 prev->pool_next = next; 3334 } 3335 3336 if (next) { 3337 next->pool_prev = prev; 3338 } 3339 3340 pool->pool_prev = NULL; 3341 pool->pool_next = NULL; 3342 3343 /* Clear the post counts */ 3344 switch (pool->pool_type) { 3345 case FC_TYPE_IS8802_SNAP: 3346 port->ub_post[hba->channel_ip] -= pool->pool_nentries; 3347 break; 3348 3349 case FC_TYPE_EXTENDED_LS: 3350 port->ub_post[hba->channel_els] -= pool->pool_nentries; 3351 break; 3352 3353 case FC_TYPE_FC_SERVICES: 3354 port->ub_post[hba->channel_ct] -= pool->pool_nentries; 3355 break; 3356 } 3357 3358 /* Now free the pool memory */ 3359 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3360 "ub_destroy: pool=%p type=%d size=%d count=%d", pool, 3361 pool->pool_type, pool->pool_buf_size, pool->pool_nentries); 3362 3363 /* Process the array of buffer objects in the pool */ 3364 for (i = 0; i < pool->pool_nentries; i++) { 3365 /* Get the buffer object */ 3366 ubp = (fc_unsol_buf_t *)&pool->fc_ubufs[i]; 3367 3368 /* Free the memory the buffer object represents */ 3369 kmem_free(ubp->ub_buffer, ubp->ub_bufsize); 3370 3371 /* Free the private area of the buffer object */ 3372 kmem_free(ubp->ub_fca_private, sizeof (emlxs_ub_priv_t)); 3373 } 3374 3375 /* Free the array of buffer objects in the pool */ 3376 kmem_free((caddr_t)pool->fc_ubufs, 3377 (sizeof (fc_unsol_buf_t)*pool->pool_nentries)); 3378 3379 /* Free the pool object */ 3380 kmem_free((caddr_t)pool, sizeof (emlxs_unsol_buf_t)); 3381 3382 return; 3383 3384 } /* emlxs_ub_destroy() */ 3385 3386 3387 /*ARGSUSED*/ 3388 extern int 3389 emlxs_pkt_abort(opaque_t fca_port_handle, fc_packet_t *pkt, int32_t sleep) 3390 { 3391 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 3392 emlxs_hba_t *hba = HBA; 3393 emlxs_config_t *cfg = &CFG; 3394 3395 emlxs_buf_t *sbp; 3396 NODELIST *nlp; 3397 NODELIST *prev_nlp; 3398 uint8_t channelno; 3399 CHANNEL *cp; 3400 clock_t timeout; 3401 clock_t time; 3402 int32_t pkt_ret; 3403 IOCBQ *iocbq; 3404 IOCBQ *next; 3405 IOCBQ *prev; 3406 uint32_t found; 3407 uint32_t att_bit; 3408 uint32_t pass = 0; 3409 3410 sbp = (emlxs_buf_t *)pkt->pkt_fca_private; 3411 iocbq = &sbp->iocbq; 3412 nlp = (NODELIST *)sbp->node; 3413 cp = (CHANNEL *)sbp->channel; 3414 channelno = (cp) ? cp->channelno : 0; 3415 3416 if (!(port->flag & EMLXS_PORT_BOUND)) { 3417 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg, 3418 "Port not bound."); 3419 return (FC_UNBOUND); 3420 } 3421 3422 if (!(hba->flag & FC_ONLINE_MODE)) { 3423 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg, 3424 "Adapter offline."); 3425 return (FC_OFFLINE); 3426 } 3427 3428 /* ULP requires the aborted pkt to be completed */ 3429 /* back to ULP before returning from this call. */ 3430 /* SUN knows of problems with this call so they suggested that we */ 3431 /* always return a FC_FAILURE for this call, until it is worked out. */ 3432 3433 /* Check if pkt is no good */ 3434 if (!(sbp->pkt_flags & PACKET_VALID) || 3435 (sbp->pkt_flags & PACKET_ULP_OWNED)) { 3436 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg, 3437 "Bad sbp. flags=%x", sbp->pkt_flags); 3438 return (FC_FAILURE); 3439 } 3440 3441 /* Tag this now */ 3442 /* This will prevent any thread except ours from completing it */ 3443 mutex_enter(&sbp->mtx); 3444 3445 /* Check again if we still own this */ 3446 if (!(sbp->pkt_flags & PACKET_VALID) || 3447 (sbp->pkt_flags & PACKET_ULP_OWNED)) { 3448 mutex_exit(&sbp->mtx); 3449 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg, 3450 "Bad sbp. flags=%x", sbp->pkt_flags); 3451 return (FC_FAILURE); 3452 } 3453 3454 /* Check if pkt is a real polled command */ 3455 if (!(sbp->pkt_flags & PACKET_IN_ABORT) && 3456 (sbp->pkt_flags & PACKET_POLLED)) { 3457 mutex_exit(&sbp->mtx); 3458 3459 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg, 3460 "Attempting to abort a polled I/O. sbp=%p flags=%x", sbp, 3461 sbp->pkt_flags); 3462 return (FC_FAILURE); 3463 } 3464 3465 sbp->pkt_flags |= PACKET_POLLED; 3466 sbp->pkt_flags |= PACKET_IN_ABORT; 3467 3468 if (sbp->pkt_flags & (PACKET_IN_COMPLETION | PACKET_IN_FLUSH | 3469 PACKET_IN_TIMEOUT)) { 3470 mutex_exit(&sbp->mtx); 3471 3472 /* Do nothing, pkt already on its way out */ 3473 goto done; 3474 } 3475 3476 mutex_exit(&sbp->mtx); 3477 3478 begin: 3479 pass++; 3480 3481 mutex_enter(&EMLXS_TX_CHANNEL_LOCK); 3482 3483 if (sbp->pkt_flags & PACKET_IN_TXQ) { 3484 /* Find it on the queue */ 3485 found = 0; 3486 if (iocbq->flag & IOCB_PRIORITY) { 3487 /* Search the priority queue */ 3488 prev = NULL; 3489 next = (IOCBQ *) nlp->nlp_ptx[channelno].q_first; 3490 3491 while (next) { 3492 if (next == iocbq) { 3493 /* Remove it */ 3494 if (prev) { 3495 prev->next = iocbq->next; 3496 } 3497 3498 if (nlp->nlp_ptx[channelno].q_last == 3499 (void *)iocbq) { 3500 nlp->nlp_ptx[channelno].q_last = 3501 (void *)prev; 3502 } 3503 3504 if (nlp->nlp_ptx[channelno].q_first == 3505 (void *)iocbq) { 3506 nlp->nlp_ptx[channelno]. 3507 q_first = 3508 (void *)iocbq->next; 3509 } 3510 3511 nlp->nlp_ptx[channelno].q_cnt--; 3512 iocbq->next = NULL; 3513 found = 1; 3514 break; 3515 } 3516 3517 prev = next; 3518 next = next->next; 3519 } 3520 } else { 3521 /* Search the normal queue */ 3522 prev = NULL; 3523 next = (IOCBQ *) nlp->nlp_tx[channelno].q_first; 3524 3525 while (next) { 3526 if (next == iocbq) { 3527 /* Remove it */ 3528 if (prev) { 3529 prev->next = iocbq->next; 3530 } 3531 3532 if (nlp->nlp_tx[channelno].q_last == 3533 (void *)iocbq) { 3534 nlp->nlp_tx[channelno].q_last = 3535 (void *)prev; 3536 } 3537 3538 if (nlp->nlp_tx[channelno].q_first == 3539 (void *)iocbq) { 3540 nlp->nlp_tx[channelno].q_first = 3541 (void *)iocbq->next; 3542 } 3543 3544 nlp->nlp_tx[channelno].q_cnt--; 3545 iocbq->next = NULL; 3546 found = 1; 3547 break; 3548 } 3549 3550 prev = next; 3551 next = (IOCBQ *) next->next; 3552 } 3553 } 3554 3555 if (!found) { 3556 mutex_exit(&EMLXS_TX_CHANNEL_LOCK); 3557 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg, 3558 "I/O not found in driver. sbp=%p flags=%x", sbp, 3559 sbp->pkt_flags); 3560 goto done; 3561 } 3562 3563 /* Check if node still needs servicing */ 3564 if ((nlp->nlp_ptx[channelno].q_first) || 3565 (nlp->nlp_tx[channelno].q_first && 3566 !(nlp->nlp_flag[channelno] & NLP_CLOSED))) { 3567 3568 /* 3569 * If this is the base node, 3570 * then don't shift the pointers 3571 */ 3572 /* We want to drain the base node before moving on */ 3573 if (!nlp->nlp_base) { 3574 /* Just shift channel queue */ 3575 /* pointers to next node */ 3576 cp->nodeq.q_last = (void *) nlp; 3577 cp->nodeq.q_first = nlp->nlp_next[channelno]; 3578 } 3579 } else { 3580 /* Remove node from channel queue */ 3581 3582 /* If this is the only node on list */ 3583 if (cp->nodeq.q_first == (void *)nlp && 3584 cp->nodeq.q_last == (void *)nlp) { 3585 cp->nodeq.q_last = NULL; 3586 cp->nodeq.q_first = NULL; 3587 cp->nodeq.q_cnt = 0; 3588 } else if (cp->nodeq.q_first == (void *)nlp) { 3589 cp->nodeq.q_first = nlp->nlp_next[channelno]; 3590 ((NODELIST *) cp->nodeq.q_last)-> 3591 nlp_next[channelno] = cp->nodeq.q_first; 3592 cp->nodeq.q_cnt--; 3593 } else { 3594 /* 3595 * This is a little more difficult find the 3596 * previous node in the circular channel queue 3597 */ 3598 prev_nlp = nlp; 3599 while (prev_nlp->nlp_next[channelno] != nlp) { 3600 prev_nlp = prev_nlp-> 3601 nlp_next[channelno]; 3602 } 3603 3604 prev_nlp->nlp_next[channelno] = 3605 nlp->nlp_next[channelno]; 3606 3607 if (cp->nodeq.q_last == (void *)nlp) { 3608 cp->nodeq.q_last = (void *)prev_nlp; 3609 } 3610 cp->nodeq.q_cnt--; 3611 3612 } 3613 3614 /* Clear node */ 3615 nlp->nlp_next[channelno] = NULL; 3616 } 3617 3618 /* Free the ULPIOTAG and the bmp */ 3619 if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) { 3620 hba->fc_table[sbp->iotag] = NULL; 3621 emlxs_sli4_free_xri(hba, sbp, sbp->xp); 3622 } else { 3623 (void) emlxs_unregister_pkt(cp, sbp->iotag, 1); 3624 } 3625 3626 3627 mutex_exit(&EMLXS_TX_CHANNEL_LOCK); 3628 3629 emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, 3630 IOERR_ABORT_REQUESTED, 1); 3631 3632 goto done; 3633 } 3634 3635 mutex_exit(&EMLXS_TX_CHANNEL_LOCK); 3636 3637 3638 /* Check the chip queue */ 3639 mutex_enter(&EMLXS_FCTAB_LOCK); 3640 3641 if ((sbp->pkt_flags & PACKET_IN_CHIPQ) && 3642 !(sbp->pkt_flags & PACKET_XRI_CLOSED) && 3643 (sbp == hba->fc_table[sbp->iotag])) { 3644 3645 /* Create the abort IOCB */ 3646 if (hba->state >= FC_LINK_UP) { 3647 iocbq = 3648 emlxs_create_abort_xri_cn(port, sbp->node, 3649 sbp->iotag, cp, sbp->class, ABORT_TYPE_ABTS); 3650 3651 mutex_enter(&sbp->mtx); 3652 sbp->pkt_flags |= PACKET_XRI_CLOSED; 3653 sbp->ticks = 3654 hba->timer_tics + (4 * hba->fc_ratov) + 10; 3655 sbp->abort_attempts++; 3656 mutex_exit(&sbp->mtx); 3657 } else { 3658 iocbq = 3659 emlxs_create_close_xri_cn(port, sbp->node, 3660 sbp->iotag, cp); 3661 3662 mutex_enter(&sbp->mtx); 3663 sbp->pkt_flags |= PACKET_XRI_CLOSED; 3664 sbp->ticks = hba->timer_tics + 30; 3665 sbp->abort_attempts++; 3666 mutex_exit(&sbp->mtx); 3667 } 3668 3669 mutex_exit(&EMLXS_FCTAB_LOCK); 3670 3671 /* Send this iocbq */ 3672 if (iocbq) { 3673 EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq); 3674 iocbq = NULL; 3675 } 3676 3677 goto done; 3678 } 3679 3680 mutex_exit(&EMLXS_FCTAB_LOCK); 3681 3682 /* Pkt was not on any queues */ 3683 3684 /* Check again if we still own this */ 3685 if (!(sbp->pkt_flags & PACKET_VALID) || 3686 (sbp->pkt_flags & 3687 (PACKET_ULP_OWNED | PACKET_IN_COMPLETION | 3688 PACKET_IN_FLUSH | PACKET_IN_TIMEOUT))) { 3689 goto done; 3690 } 3691 3692 if (!sleep) { 3693 return (FC_FAILURE); 3694 } 3695 3696 /* Apparently the pkt was not found. Let's delay and try again */ 3697 if (pass < 5) { 3698 delay(drv_usectohz(5000000)); /* 5 seconds */ 3699 3700 /* Check again if we still own this */ 3701 if (!(sbp->pkt_flags & PACKET_VALID) || 3702 (sbp->pkt_flags & 3703 (PACKET_ULP_OWNED | PACKET_IN_COMPLETION | 3704 PACKET_IN_FLUSH | PACKET_IN_TIMEOUT))) { 3705 goto done; 3706 } 3707 3708 goto begin; 3709 } 3710 3711 force_it: 3712 3713 /* Force the completion now */ 3714 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3715 "Abort: Completing an IO thats not outstanding: %x", sbp->iotag); 3716 3717 /* Now complete it */ 3718 emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, IOERR_ABORT_REQUESTED, 3719 1); 3720 3721 done: 3722 3723 /* Now wait for the pkt to complete */ 3724 if (!(sbp->pkt_flags & PACKET_COMPLETED)) { 3725 /* Set thread timeout */ 3726 timeout = emlxs_timeout(hba, 30); 3727 3728 /* Check for panic situation */ 3729 if (ddi_in_panic()) { 3730 3731 /* 3732 * In panic situations there will be one thread with no 3733 * interrrupts (hard or soft) and no timers 3734 */ 3735 3736 /* 3737 * We must manually poll everything in this thread 3738 * to keep the driver going. 3739 */ 3740 3741 cp = (CHANNEL *)sbp->channel; 3742 switch (cp->channelno) { 3743 case FC_FCP_RING: 3744 att_bit = HA_R0ATT; 3745 break; 3746 3747 case FC_IP_RING: 3748 att_bit = HA_R1ATT; 3749 break; 3750 3751 case FC_ELS_RING: 3752 att_bit = HA_R2ATT; 3753 break; 3754 3755 case FC_CT_RING: 3756 att_bit = HA_R3ATT; 3757 break; 3758 } 3759 3760 /* Keep polling the chip until our IO is completed */ 3761 (void) drv_getparm(LBOLT, &time); 3762 while ((time < timeout) && 3763 !(sbp->pkt_flags & PACKET_COMPLETED)) { 3764 EMLXS_SLI_POLL_INTR(hba, att_bit); 3765 (void) drv_getparm(LBOLT, &time); 3766 } 3767 } else { 3768 /* Wait for IO completion or timeout */ 3769 mutex_enter(&EMLXS_PKT_LOCK); 3770 pkt_ret = 0; 3771 while ((pkt_ret != -1) && 3772 !(sbp->pkt_flags & PACKET_COMPLETED)) { 3773 pkt_ret = 3774 cv_timedwait(&EMLXS_PKT_CV, 3775 &EMLXS_PKT_LOCK, timeout); 3776 } 3777 mutex_exit(&EMLXS_PKT_LOCK); 3778 } 3779 3780 /* Check if timeout occured. This is not good. */ 3781 /* Something happened to our IO. */ 3782 if (!(sbp->pkt_flags & PACKET_COMPLETED)) { 3783 /* Force the completion now */ 3784 goto force_it; 3785 } 3786 } 3787 #if (EMLXS_MODREVX == EMLXS_MODREV2X) 3788 emlxs_unswap_pkt(sbp); 3789 #endif /* EMLXS_MODREV2X */ 3790 3791 /* Check again if we still own this */ 3792 if ((sbp->pkt_flags & PACKET_VALID) && 3793 !(sbp->pkt_flags & PACKET_ULP_OWNED)) { 3794 mutex_enter(&sbp->mtx); 3795 if ((sbp->pkt_flags & PACKET_VALID) && 3796 !(sbp->pkt_flags & PACKET_ULP_OWNED)) { 3797 sbp->pkt_flags |= PACKET_ULP_OWNED; 3798 } 3799 mutex_exit(&sbp->mtx); 3800 } 3801 3802 #ifdef ULP_PATCH5 3803 if (cfg[CFG_ENABLE_PATCH].current & ULP_PATCH5) { 3804 return (FC_FAILURE); 3805 } 3806 #endif /* ULP_PATCH5 */ 3807 3808 return (FC_SUCCESS); 3809 3810 } /* emlxs_pkt_abort() */ 3811 3812 3813 static void 3814 emlxs_abort_all(emlxs_hba_t *hba, uint32_t *tx, uint32_t *chip) 3815 { 3816 emlxs_port_t *port = &PPORT; 3817 fc_packet_t *pkt; 3818 emlxs_buf_t *sbp; 3819 uint32_t i; 3820 uint32_t flg; 3821 uint32_t rc; 3822 uint32_t txcnt; 3823 uint32_t chipcnt; 3824 3825 txcnt = 0; 3826 chipcnt = 0; 3827 3828 mutex_enter(&EMLXS_FCTAB_LOCK); 3829 for (i = 0; i < hba->max_iotag; i++) { 3830 sbp = hba->fc_table[i]; 3831 if (sbp == NULL || sbp == STALE_PACKET) { 3832 continue; 3833 } 3834 flg = (sbp->pkt_flags & PACKET_IN_CHIPQ); 3835 pkt = PRIV2PKT(sbp); 3836 mutex_exit(&EMLXS_FCTAB_LOCK); 3837 rc = emlxs_pkt_abort(port, pkt, 0); 3838 if (rc == FC_SUCCESS) { 3839 if (flg) { 3840 chipcnt++; 3841 } else { 3842 txcnt++; 3843 } 3844 } 3845 mutex_enter(&EMLXS_FCTAB_LOCK); 3846 } 3847 mutex_exit(&EMLXS_FCTAB_LOCK); 3848 *tx = txcnt; 3849 *chip = chipcnt; 3850 } /* emlxs_abort_all() */ 3851 3852 3853 extern int32_t 3854 emlxs_reset(opaque_t fca_port_handle, uint32_t cmd) 3855 { 3856 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 3857 emlxs_hba_t *hba = HBA; 3858 int rval; 3859 int ret; 3860 clock_t timeout; 3861 3862 if (!(port->flag & EMLXS_PORT_BOUND)) { 3863 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3864 "fca_reset failed. Port not bound."); 3865 3866 return (FC_UNBOUND); 3867 } 3868 3869 switch (cmd) { 3870 case FC_FCA_LINK_RESET: 3871 3872 if (!(hba->flag & FC_ONLINE_MODE) || 3873 (hba->state <= FC_LINK_DOWN)) { 3874 return (FC_SUCCESS); 3875 } 3876 3877 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3878 "fca_reset: Resetting Link."); 3879 3880 mutex_enter(&EMLXS_LINKUP_LOCK); 3881 hba->linkup_wait_flag = TRUE; 3882 mutex_exit(&EMLXS_LINKUP_LOCK); 3883 3884 if (emlxs_reset_link(hba, 1, 1)) { 3885 mutex_enter(&EMLXS_LINKUP_LOCK); 3886 hba->linkup_wait_flag = FALSE; 3887 mutex_exit(&EMLXS_LINKUP_LOCK); 3888 3889 return (FC_FAILURE); 3890 } 3891 3892 mutex_enter(&EMLXS_LINKUP_LOCK); 3893 timeout = emlxs_timeout(hba, 60); 3894 ret = 0; 3895 while ((ret != -1) && (hba->linkup_wait_flag == TRUE)) { 3896 ret = 3897 cv_timedwait(&EMLXS_LINKUP_CV, &EMLXS_LINKUP_LOCK, 3898 timeout); 3899 } 3900 3901 hba->linkup_wait_flag = FALSE; 3902 mutex_exit(&EMLXS_LINKUP_LOCK); 3903 3904 if (ret == -1) { 3905 return (FC_FAILURE); 3906 } 3907 3908 return (FC_SUCCESS); 3909 3910 case FC_FCA_CORE: 3911 #ifdef DUMP_SUPPORT 3912 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3913 "fca_reset: Core dump."); 3914 3915 /* Schedule a USER dump */ 3916 emlxs_dump(hba, EMLXS_USER_DUMP, 0, 0); 3917 3918 /* Wait for dump to complete */ 3919 emlxs_dump_wait(hba); 3920 3921 return (FC_SUCCESS); 3922 #endif /* DUMP_SUPPORT */ 3923 3924 case FC_FCA_RESET: 3925 case FC_FCA_RESET_CORE: 3926 3927 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3928 "fca_reset: Resetting Adapter."); 3929 3930 rval = FC_SUCCESS; 3931 3932 if (emlxs_offline(hba) == 0) { 3933 (void) emlxs_online(hba); 3934 } else { 3935 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3936 "fca_reset: Adapter reset failed. Device busy."); 3937 3938 rval = FC_DEVICE_BUSY; 3939 } 3940 3941 return (rval); 3942 3943 default: 3944 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3945 "fca_reset: Unknown command. cmd=%x", cmd); 3946 3947 break; 3948 } 3949 3950 return (FC_FAILURE); 3951 3952 } /* emlxs_reset() */ 3953 3954 3955 extern int 3956 emlxs_port_manage(opaque_t fca_port_handle, fc_fca_pm_t *pm) 3957 { 3958 emlxs_port_t *port = (emlxs_port_t *)fca_port_handle; 3959 emlxs_hba_t *hba = HBA; 3960 int32_t ret; 3961 emlxs_vpd_t *vpd = &VPD; 3962 3963 3964 ret = FC_SUCCESS; 3965 3966 if (!(port->flag & EMLXS_PORT_BOUND)) { 3967 return (FC_UNBOUND); 3968 } 3969 3970 3971 #ifdef IDLE_TIMER 3972 emlxs_pm_busy_component(hba); 3973 #endif /* IDLE_TIMER */ 3974 3975 switch (pm->pm_cmd_code) { 3976 3977 case FC_PORT_GET_FW_REV: 3978 { 3979 char buffer[128]; 3980 3981 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 3982 "fca_port_manage: FC_PORT_GET_FW_REV"); 3983 3984 (void) sprintf(buffer, "%s %s", hba->model_info.model, 3985 vpd->fw_version); 3986 bzero(pm->pm_data_buf, pm->pm_data_len); 3987 3988 if (pm->pm_data_len < strlen(buffer) + 1) { 3989 ret = FC_NOMEM; 3990 3991 break; 3992 } 3993 3994 (void) strcpy(pm->pm_data_buf, buffer); 3995 break; 3996 } 3997 3998 case FC_PORT_GET_FCODE_REV: 3999 { 4000 char buffer[128]; 4001 4002 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4003 "fca_port_manage: FC_PORT_GET_FCODE_REV"); 4004 4005 /* Force update here just to be sure */ 4006 emlxs_get_fcode_version(hba); 4007 4008 (void) sprintf(buffer, "%s %s", hba->model_info.model, 4009 vpd->fcode_version); 4010 bzero(pm->pm_data_buf, pm->pm_data_len); 4011 4012 if (pm->pm_data_len < strlen(buffer) + 1) { 4013 ret = FC_NOMEM; 4014 break; 4015 } 4016 4017 (void) strcpy(pm->pm_data_buf, buffer); 4018 break; 4019 } 4020 4021 case FC_PORT_GET_DUMP_SIZE: 4022 { 4023 #ifdef DUMP_SUPPORT 4024 uint32_t dump_size = 0; 4025 4026 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4027 "fca_port_manage: FC_PORT_GET_DUMP_SIZE"); 4028 4029 if (pm->pm_data_len < sizeof (uint32_t)) { 4030 ret = FC_NOMEM; 4031 break; 4032 } 4033 4034 (void) emlxs_get_dump(hba, NULL, &dump_size); 4035 4036 *((uint32_t *)pm->pm_data_buf) = dump_size; 4037 4038 #else 4039 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4040 "fca_port_manage: FC_PORT_GET_DUMP_SIZE unsupported."); 4041 4042 #endif /* DUMP_SUPPORT */ 4043 4044 break; 4045 } 4046 4047 case FC_PORT_GET_DUMP: 4048 { 4049 #ifdef DUMP_SUPPORT 4050 uint32_t dump_size = 0; 4051 4052 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4053 "fca_port_manage: FC_PORT_GET_DUMP"); 4054 4055 (void) emlxs_get_dump(hba, NULL, &dump_size); 4056 4057 if (pm->pm_data_len < dump_size) { 4058 ret = FC_NOMEM; 4059 break; 4060 } 4061 4062 (void) emlxs_get_dump(hba, (uint8_t *)pm->pm_data_buf, 4063 (uint32_t *)&dump_size); 4064 #else 4065 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4066 "fca_port_manage: FC_PORT_GET_DUMP unsupported."); 4067 4068 #endif /* DUMP_SUPPORT */ 4069 4070 break; 4071 } 4072 4073 case FC_PORT_FORCE_DUMP: 4074 { 4075 #ifdef DUMP_SUPPORT 4076 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4077 "fca_port_manage: FC_PORT_FORCE_DUMP"); 4078 4079 /* Schedule a USER dump */ 4080 emlxs_dump(hba, EMLXS_USER_DUMP, 0, 0); 4081 4082 /* Wait for dump to complete */ 4083 emlxs_dump_wait(hba); 4084 #else 4085 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4086 "fca_port_manage: FC_PORT_FORCE_DUMP unsupported."); 4087 4088 #endif /* DUMP_SUPPORT */ 4089 break; 4090 } 4091 4092 case FC_PORT_LINK_STATE: 4093 { 4094 uint32_t *link_state; 4095 4096 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4097 "fca_port_manage: FC_PORT_LINK_STATE"); 4098 4099 if (pm->pm_stat_len != sizeof (*link_state)) { 4100 ret = FC_NOMEM; 4101 break; 4102 } 4103 4104 if (pm->pm_cmd_buf != NULL) { 4105 /* 4106 * Can't look beyond the FCA port. 4107 */ 4108 ret = FC_INVALID_REQUEST; 4109 break; 4110 } 4111 4112 link_state = (uint32_t *)pm->pm_stat_buf; 4113 4114 /* Set the state */ 4115 if (hba->state >= FC_LINK_UP) { 4116 /* Check for loop topology */ 4117 if (hba->topology == TOPOLOGY_LOOP) { 4118 *link_state = FC_STATE_LOOP; 4119 } else { 4120 *link_state = FC_STATE_ONLINE; 4121 } 4122 4123 /* Set the link speed */ 4124 switch (hba->linkspeed) { 4125 case LA_2GHZ_LINK: 4126 *link_state |= FC_STATE_2GBIT_SPEED; 4127 break; 4128 case LA_4GHZ_LINK: 4129 *link_state |= FC_STATE_4GBIT_SPEED; 4130 break; 4131 case LA_8GHZ_LINK: 4132 *link_state |= FC_STATE_8GBIT_SPEED; 4133 break; 4134 case LA_10GHZ_LINK: 4135 *link_state |= FC_STATE_10GBIT_SPEED; 4136 break; 4137 case LA_1GHZ_LINK: 4138 default: 4139 *link_state |= FC_STATE_1GBIT_SPEED; 4140 break; 4141 } 4142 } else { 4143 *link_state = FC_STATE_OFFLINE; 4144 } 4145 4146 break; 4147 } 4148 4149 4150 case FC_PORT_ERR_STATS: 4151 case FC_PORT_RLS: 4152 { 4153 MAILBOXQ *mbq; 4154 MAILBOX *mb; 4155 fc_rls_acc_t *bp; 4156 4157 if (!(hba->flag & FC_ONLINE_MODE)) { 4158 return (FC_OFFLINE); 4159 } 4160 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4161 "fca_port_manage: FC_PORT_RLS / FC_PORT_ERR_STATS"); 4162 4163 if (pm->pm_data_len < sizeof (fc_rls_acc_t)) { 4164 ret = FC_NOMEM; 4165 break; 4166 } 4167 4168 if ((mbq = (MAILBOXQ *)emlxs_mem_get(hba, 4169 MEM_MBOX, 1)) == 0) { 4170 ret = FC_NOMEM; 4171 break; 4172 } 4173 mb = (MAILBOX *)mbq; 4174 4175 emlxs_mb_read_lnk_stat(hba, mbq); 4176 if (EMLXS_SLI_ISSUE_MBOX_CMD(hba, mbq, MBX_WAIT, 0) 4177 != MBX_SUCCESS) { 4178 ret = FC_PBUSY; 4179 } else { 4180 bp = (fc_rls_acc_t *)pm->pm_data_buf; 4181 4182 bp->rls_link_fail = mb->un.varRdLnk.linkFailureCnt; 4183 bp->rls_sync_loss = mb->un.varRdLnk.lossSyncCnt; 4184 bp->rls_sig_loss = mb->un.varRdLnk.lossSignalCnt; 4185 bp->rls_prim_seq_err = mb->un.varRdLnk.primSeqErrCnt; 4186 bp->rls_invalid_word = 4187 mb->un.varRdLnk.invalidXmitWord; 4188 bp->rls_invalid_crc = mb->un.varRdLnk.crcCnt; 4189 } 4190 4191 (void) emlxs_mem_put(hba, MEM_MBOX, (uint8_t *)mbq); 4192 break; 4193 } 4194 4195 case FC_PORT_DOWNLOAD_FW: 4196 if (!(hba->flag & FC_ONLINE_MODE)) { 4197 return (FC_OFFLINE); 4198 } 4199 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4200 "fca_port_manage: FC_PORT_DOWNLOAD_FW"); 4201 ret = emlxs_fw_download(hba, pm->pm_data_buf, 4202 pm->pm_data_len, 1); 4203 break; 4204 4205 case FC_PORT_DOWNLOAD_FCODE: 4206 if (!(hba->flag & FC_ONLINE_MODE)) { 4207 return (FC_OFFLINE); 4208 } 4209 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4210 "fca_port_manage: FC_PORT_DOWNLOAD_FCODE"); 4211 ret = emlxs_fw_download(hba, pm->pm_data_buf, 4212 pm->pm_data_len, 1); 4213 break; 4214 4215 case FC_PORT_DIAG: 4216 { 4217 uint32_t errno = 0; 4218 uint32_t did = 0; 4219 uint32_t pattern = 0; 4220 4221 switch (pm->pm_cmd_flags) { 4222 case EMLXS_DIAG_BIU: 4223 4224 if (!(hba->flag & FC_ONLINE_MODE)) { 4225 return (FC_OFFLINE); 4226 } 4227 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4228 "fca_port_manage: EMLXS_DIAG_BIU"); 4229 4230 if (pm->pm_data_len) { 4231 pattern = *((uint32_t *)pm->pm_data_buf); 4232 } 4233 4234 errno = emlxs_diag_biu_run(hba, pattern); 4235 4236 if (pm->pm_stat_len == sizeof (errno)) { 4237 *(int *)pm->pm_stat_buf = errno; 4238 } 4239 4240 break; 4241 4242 4243 case EMLXS_DIAG_POST: 4244 4245 if (!(hba->flag & FC_ONLINE_MODE)) { 4246 return (FC_OFFLINE); 4247 } 4248 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4249 "fca_port_manage: EMLXS_DIAG_POST"); 4250 4251 errno = emlxs_diag_post_run(hba); 4252 4253 if (pm->pm_stat_len == sizeof (errno)) { 4254 *(int *)pm->pm_stat_buf = errno; 4255 } 4256 4257 break; 4258 4259 4260 case EMLXS_DIAG_ECHO: 4261 4262 if (!(hba->flag & FC_ONLINE_MODE)) { 4263 return (FC_OFFLINE); 4264 } 4265 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4266 "fca_port_manage: EMLXS_DIAG_ECHO"); 4267 4268 if (pm->pm_cmd_len != sizeof (uint32_t)) { 4269 ret = FC_INVALID_REQUEST; 4270 break; 4271 } 4272 4273 did = *((uint32_t *)pm->pm_cmd_buf); 4274 4275 if (pm->pm_data_len) { 4276 pattern = *((uint32_t *)pm->pm_data_buf); 4277 } 4278 4279 errno = emlxs_diag_echo_run(port, did, pattern); 4280 4281 if (pm->pm_stat_len == sizeof (errno)) { 4282 *(int *)pm->pm_stat_buf = errno; 4283 } 4284 4285 break; 4286 4287 4288 case EMLXS_PARM_GET_NUM: 4289 { 4290 uint32_t *num; 4291 emlxs_config_t *cfg; 4292 uint32_t i; 4293 uint32_t count; 4294 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4295 "fca_port_manage: EMLXS_PARM_GET_NUM"); 4296 4297 if (pm->pm_stat_len < sizeof (uint32_t)) { 4298 ret = FC_NOMEM; 4299 break; 4300 } 4301 4302 num = (uint32_t *)pm->pm_stat_buf; 4303 count = 0; 4304 cfg = &CFG; 4305 for (i = 0; i < NUM_CFG_PARAM; i++, cfg++) { 4306 if (!(cfg->flags & PARM_HIDDEN)) { 4307 count++; 4308 } 4309 4310 } 4311 4312 *num = count; 4313 4314 break; 4315 } 4316 4317 case EMLXS_PARM_GET_LIST: 4318 { 4319 emlxs_parm_t *parm; 4320 emlxs_config_t *cfg; 4321 uint32_t i; 4322 uint32_t max_count; 4323 4324 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4325 "fca_port_manage: EMLXS_PARM_GET_LIST"); 4326 4327 if (pm->pm_stat_len < sizeof (emlxs_parm_t)) { 4328 ret = FC_NOMEM; 4329 break; 4330 } 4331 4332 max_count = pm->pm_stat_len / sizeof (emlxs_parm_t); 4333 4334 parm = (emlxs_parm_t *)pm->pm_stat_buf; 4335 cfg = &CFG; 4336 for (i = 0; i < NUM_CFG_PARAM && max_count; i++, 4337 cfg++) { 4338 if (!(cfg->flags & PARM_HIDDEN)) { 4339 (void) strcpy(parm->label, cfg->string); 4340 parm->min = cfg->low; 4341 parm->max = cfg->hi; 4342 parm->def = cfg->def; 4343 parm->current = cfg->current; 4344 parm->flags = cfg->flags; 4345 (void) strcpy(parm->help, cfg->help); 4346 parm++; 4347 max_count--; 4348 } 4349 } 4350 4351 break; 4352 } 4353 4354 case EMLXS_PARM_GET: 4355 { 4356 emlxs_parm_t *parm_in; 4357 emlxs_parm_t *parm_out; 4358 emlxs_config_t *cfg; 4359 uint32_t i; 4360 uint32_t len; 4361 4362 if (pm->pm_cmd_len < sizeof (emlxs_parm_t)) { 4363 EMLXS_MSGF(EMLXS_CONTEXT, 4364 &emlxs_sfs_debug_msg, 4365 "fca_port_manage: EMLXS_PARM_GET. " 4366 "inbuf too small."); 4367 4368 ret = FC_BADCMD; 4369 break; 4370 } 4371 4372 if (pm->pm_stat_len < sizeof (emlxs_parm_t)) { 4373 EMLXS_MSGF(EMLXS_CONTEXT, 4374 &emlxs_sfs_debug_msg, 4375 "fca_port_manage: EMLXS_PARM_GET. " 4376 "outbuf too small"); 4377 4378 ret = FC_BADCMD; 4379 break; 4380 } 4381 4382 parm_in = (emlxs_parm_t *)pm->pm_cmd_buf; 4383 parm_out = (emlxs_parm_t *)pm->pm_stat_buf; 4384 len = strlen(parm_in->label); 4385 cfg = &CFG; 4386 ret = FC_BADOBJECT; 4387 4388 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4389 "fca_port_manage: EMLXS_PARM_GET: %s", 4390 parm_in->label); 4391 4392 for (i = 0; i < NUM_CFG_PARAM; i++, cfg++) { 4393 if (len == strlen(cfg->string) && 4394 (strcmp(parm_in->label, 4395 cfg->string) == 0)) { 4396 (void) strcpy(parm_out->label, 4397 cfg->string); 4398 parm_out->min = cfg->low; 4399 parm_out->max = cfg->hi; 4400 parm_out->def = cfg->def; 4401 parm_out->current = cfg->current; 4402 parm_out->flags = cfg->flags; 4403 (void) strcpy(parm_out->help, 4404 cfg->help); 4405 4406 ret = FC_SUCCESS; 4407 break; 4408 } 4409 } 4410 4411 break; 4412 } 4413 4414 case EMLXS_PARM_SET: 4415 { 4416 emlxs_parm_t *parm_in; 4417 emlxs_parm_t *parm_out; 4418 emlxs_config_t *cfg; 4419 uint32_t i; 4420 uint32_t len; 4421 4422 if (pm->pm_cmd_len < sizeof (emlxs_parm_t)) { 4423 EMLXS_MSGF(EMLXS_CONTEXT, 4424 &emlxs_sfs_debug_msg, 4425 "fca_port_manage: EMLXS_PARM_GET. " 4426 "inbuf too small."); 4427 4428 ret = FC_BADCMD; 4429 break; 4430 } 4431 4432 if (pm->pm_stat_len < sizeof (emlxs_parm_t)) { 4433 EMLXS_MSGF(EMLXS_CONTEXT, 4434 &emlxs_sfs_debug_msg, 4435 "fca_port_manage: EMLXS_PARM_GET. " 4436 "outbuf too small"); 4437 ret = FC_BADCMD; 4438 break; 4439 } 4440 4441 parm_in = (emlxs_parm_t *)pm->pm_cmd_buf; 4442 parm_out = (emlxs_parm_t *)pm->pm_stat_buf; 4443 len = strlen(parm_in->label); 4444 cfg = &CFG; 4445 ret = FC_BADOBJECT; 4446 4447 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4448 "fca_port_manage: EMLXS_PARM_SET: %s=0x%x,%d", 4449 parm_in->label, parm_in->current, 4450 parm_in->current); 4451 4452 for (i = 0; i < NUM_CFG_PARAM; i++, cfg++) { 4453 /* Find matching parameter string */ 4454 if (len == strlen(cfg->string) && 4455 (strcmp(parm_in->label, 4456 cfg->string) == 0)) { 4457 /* Attempt to update parameter */ 4458 if (emlxs_set_parm(hba, i, 4459 parm_in->current) == FC_SUCCESS) { 4460 (void) strcpy(parm_out->label, 4461 cfg->string); 4462 parm_out->min = cfg->low; 4463 parm_out->max = cfg->hi; 4464 parm_out->def = cfg->def; 4465 parm_out->current = 4466 cfg->current; 4467 parm_out->flags = cfg->flags; 4468 (void) strcpy(parm_out->help, 4469 cfg->help); 4470 4471 ret = FC_SUCCESS; 4472 } 4473 4474 break; 4475 } 4476 } 4477 4478 break; 4479 } 4480 4481 case EMLXS_LOG_GET: 4482 { 4483 emlxs_log_req_t *req; 4484 emlxs_log_resp_t *resp; 4485 uint32_t len; 4486 4487 /* Check command size */ 4488 if (pm->pm_cmd_len < sizeof (emlxs_log_req_t)) { 4489 ret = FC_BADCMD; 4490 break; 4491 } 4492 4493 /* Get the request */ 4494 req = (emlxs_log_req_t *)pm->pm_cmd_buf; 4495 4496 /* Calculate the response length from the request */ 4497 len = sizeof (emlxs_log_resp_t) + 4498 (req->count * MAX_LOG_MSG_LENGTH); 4499 4500 /* Check the response buffer length */ 4501 if (pm->pm_stat_len < len) { 4502 ret = FC_BADCMD; 4503 break; 4504 } 4505 4506 /* Get the response pointer */ 4507 resp = (emlxs_log_resp_t *)pm->pm_stat_buf; 4508 4509 /* Get the request log enties */ 4510 (void) emlxs_msg_log_get(hba, req, resp); 4511 4512 ret = FC_SUCCESS; 4513 break; 4514 } 4515 4516 case EMLXS_GET_BOOT_REV: 4517 { 4518 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4519 "fca_port_manage: EMLXS_GET_BOOT_REV"); 4520 4521 if (pm->pm_stat_len < strlen(vpd->boot_version)) { 4522 ret = FC_NOMEM; 4523 break; 4524 } 4525 4526 bzero(pm->pm_stat_buf, pm->pm_stat_len); 4527 (void) sprintf(pm->pm_stat_buf, "%s %s", 4528 hba->model_info.model, vpd->boot_version); 4529 4530 break; 4531 } 4532 4533 case EMLXS_DOWNLOAD_BOOT: 4534 if (!(hba->flag & FC_ONLINE_MODE)) { 4535 return (FC_OFFLINE); 4536 } 4537 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4538 "fca_port_manage: EMLXS_DOWNLOAD_BOOT"); 4539 4540 ret = emlxs_fw_download(hba, pm->pm_data_buf, 4541 pm->pm_data_len, 1); 4542 break; 4543 4544 case EMLXS_DOWNLOAD_CFL: 4545 { 4546 uint32_t *buffer; 4547 uint32_t region; 4548 uint32_t length; 4549 4550 if (!(hba->flag & FC_ONLINE_MODE)) { 4551 return (FC_OFFLINE); 4552 } 4553 4554 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4555 "fca_port_manage: EMLXS_DOWNLOAD_CFL"); 4556 4557 /* Extract the region number from the first word. */ 4558 buffer = (uint32_t *)pm->pm_data_buf; 4559 region = *buffer++; 4560 4561 /* Adjust the image length for the header word */ 4562 length = pm->pm_data_len - 4; 4563 4564 ret = 4565 emlxs_cfl_download(hba, region, (caddr_t)buffer, 4566 length); 4567 break; 4568 } 4569 4570 case EMLXS_VPD_GET: 4571 { 4572 emlxs_vpd_desc_t *vpd_out; 4573 4574 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4575 "fca_port_manage: EMLXS_VPD_GET"); 4576 4577 if (pm->pm_stat_len < sizeof (emlxs_vpd_desc_t)) { 4578 ret = FC_BADCMD; 4579 break; 4580 } 4581 4582 vpd_out = (emlxs_vpd_desc_t *)pm->pm_stat_buf; 4583 bzero(vpd_out, sizeof (emlxs_vpd_desc_t)); 4584 4585 (void) strncpy(vpd_out->id, vpd->id, 4586 sizeof (vpd_out->id)); 4587 (void) strncpy(vpd_out->part_num, vpd->part_num, 4588 sizeof (vpd_out->part_num)); 4589 (void) strncpy(vpd_out->eng_change, vpd->eng_change, 4590 sizeof (vpd_out->eng_change)); 4591 (void) strncpy(vpd_out->manufacturer, vpd->manufacturer, 4592 sizeof (vpd_out->manufacturer)); 4593 (void) strncpy(vpd_out->serial_num, vpd->serial_num, 4594 sizeof (vpd_out->serial_num)); 4595 (void) strncpy(vpd_out->model, vpd->model, 4596 sizeof (vpd_out->model)); 4597 (void) strncpy(vpd_out->model_desc, vpd->model_desc, 4598 sizeof (vpd_out->model_desc)); 4599 (void) strncpy(vpd_out->port_num, vpd->port_num, 4600 sizeof (vpd_out->port_num)); 4601 (void) strncpy(vpd_out->prog_types, vpd->prog_types, 4602 sizeof (vpd_out->prog_types)); 4603 4604 ret = FC_SUCCESS; 4605 4606 break; 4607 } 4608 4609 case EMLXS_GET_FCIO_REV: 4610 { 4611 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4612 "fca_port_manage: EMLXS_GET_FCIO_REV"); 4613 4614 if (pm->pm_stat_len < sizeof (uint32_t)) { 4615 ret = FC_NOMEM; 4616 break; 4617 } 4618 4619 bzero(pm->pm_stat_buf, pm->pm_stat_len); 4620 *(uint32_t *)pm->pm_stat_buf = FCIO_REV; 4621 4622 break; 4623 } 4624 4625 case EMLXS_GET_DFC_REV: 4626 { 4627 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4628 "fca_port_manage: EMLXS_GET_DFC_REV"); 4629 4630 if (pm->pm_stat_len < sizeof (uint32_t)) { 4631 ret = FC_NOMEM; 4632 break; 4633 } 4634 4635 bzero(pm->pm_stat_buf, pm->pm_stat_len); 4636 *(uint32_t *)pm->pm_stat_buf = DFC_REV; 4637 4638 break; 4639 } 4640 4641 case EMLXS_SET_BOOT_STATE: 4642 case EMLXS_SET_BOOT_STATE_old: 4643 { 4644 uint32_t state; 4645 4646 if (!(hba->flag & FC_ONLINE_MODE)) { 4647 return (FC_OFFLINE); 4648 } 4649 if (pm->pm_cmd_len < sizeof (uint32_t)) { 4650 EMLXS_MSGF(EMLXS_CONTEXT, 4651 &emlxs_sfs_debug_msg, 4652 "fca_port_manage: EMLXS_SET_BOOT_STATE"); 4653 ret = FC_BADCMD; 4654 break; 4655 } 4656 4657 state = *(uint32_t *)pm->pm_cmd_buf; 4658 4659 if (state == 0) { 4660 EMLXS_MSGF(EMLXS_CONTEXT, 4661 &emlxs_sfs_debug_msg, 4662 "fca_port_manage: EMLXS_SET_BOOT_STATE: " 4663 "Disable"); 4664 ret = emlxs_boot_code_disable(hba); 4665 } else { 4666 EMLXS_MSGF(EMLXS_CONTEXT, 4667 &emlxs_sfs_debug_msg, 4668 "fca_port_manage: EMLXS_SET_BOOT_STATE: " 4669 "Enable"); 4670 ret = emlxs_boot_code_enable(hba); 4671 } 4672 4673 break; 4674 } 4675 4676 case EMLXS_GET_BOOT_STATE: 4677 case EMLXS_GET_BOOT_STATE_old: 4678 { 4679 if (!(hba->flag & FC_ONLINE_MODE)) { 4680 return (FC_OFFLINE); 4681 } 4682 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4683 "fca_port_manage: EMLXS_GET_BOOT_STATE"); 4684 4685 if (pm->pm_stat_len < sizeof (uint32_t)) { 4686 ret = FC_NOMEM; 4687 break; 4688 } 4689 bzero(pm->pm_stat_buf, pm->pm_stat_len); 4690 4691 ret = emlxs_boot_code_state(hba); 4692 4693 if (ret == FC_SUCCESS) { 4694 *(uint32_t *)pm->pm_stat_buf = 1; 4695 ret = FC_SUCCESS; 4696 } else if (ret == FC_FAILURE) { 4697 ret = FC_SUCCESS; 4698 } 4699 4700 break; 4701 } 4702 4703 case EMLXS_HW_ERROR_TEST: 4704 { 4705 if (!(hba->flag & FC_ONLINE_MODE)) { 4706 return (FC_OFFLINE); 4707 } 4708 4709 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4710 "fca_port_manage: EMLXS_HW_ERROR_TEST"); 4711 4712 /* Trigger a mailbox timeout */ 4713 hba->mbox_timer = hba->timer_tics; 4714 4715 break; 4716 } 4717 4718 case EMLXS_TEST_CODE: 4719 { 4720 uint32_t *cmd; 4721 4722 if (!(hba->flag & FC_ONLINE_MODE)) { 4723 return (FC_OFFLINE); 4724 } 4725 4726 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4727 "fca_port_manage: EMLXS_TEST_CODE"); 4728 4729 if (pm->pm_cmd_len < sizeof (uint32_t)) { 4730 EMLXS_MSGF(EMLXS_CONTEXT, 4731 &emlxs_sfs_debug_msg, 4732 "fca_port_manage: EMLXS_TEST_CODE. " 4733 "inbuf to small."); 4734 4735 ret = FC_BADCMD; 4736 break; 4737 } 4738 4739 cmd = (uint32_t *)pm->pm_cmd_buf; 4740 4741 ret = emlxs_test(hba, cmd[0], 4742 (pm->pm_cmd_len/sizeof (uint32_t)) - 1, &cmd[1]); 4743 4744 break; 4745 } 4746 4747 case EMLXS_BAR_IO: 4748 { 4749 uint32_t *cmd; 4750 uint32_t *datap; 4751 uint32_t offset; 4752 caddr_t addr; 4753 uint32_t i; 4754 uint32_t tx_cnt; 4755 uint32_t chip_cnt; 4756 4757 cmd = (uint32_t *)pm->pm_cmd_buf; 4758 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4759 "fca_port_manage: EMLXS_BAR_IO %x %x %x", 4760 cmd[0], cmd[1], cmd[2]); 4761 4762 offset = cmd[1]; 4763 4764 ret = FC_SUCCESS; 4765 4766 switch (cmd[0]) { 4767 case 2: /* bar1read */ 4768 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) { 4769 return (FC_BADCMD); 4770 } 4771 4772 /* Registers in this range are invalid */ 4773 if ((offset >= 0x4C00) && (offset < 0x5000)) { 4774 return (FC_BADCMD); 4775 } 4776 if ((offset >= 0x5800) || (offset & 0x3)) { 4777 return (FC_BADCMD); 4778 } 4779 datap = (uint32_t *)pm->pm_stat_buf; 4780 4781 for (i = 0; i < pm->pm_stat_len; 4782 i += sizeof (uint32_t)) { 4783 if ((offset >= 0x4C00) && 4784 (offset < 0x5000)) { 4785 pm->pm_stat_len = i; 4786 break; 4787 } 4788 if (offset >= 0x5800) { 4789 pm->pm_stat_len = i; 4790 break; 4791 } 4792 addr = hba->sli.sli4.bar1_addr + offset; 4793 *datap = READ_BAR1_REG(hba, addr); 4794 datap++; 4795 offset += sizeof (uint32_t); 4796 } 4797 #ifdef FMA_SUPPORT 4798 /* Access handle validation */ 4799 EMLXS_CHK_ACC_HANDLE(hba, 4800 hba->sli.sli4.bar1_acc_handle); 4801 #endif /* FMA_SUPPORT */ 4802 break; 4803 case 3: /* bar2read */ 4804 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) { 4805 return (FC_BADCMD); 4806 } 4807 if ((offset >= 0x1000) || (offset & 0x3)) { 4808 return (FC_BADCMD); 4809 } 4810 datap = (uint32_t *)pm->pm_stat_buf; 4811 4812 for (i = 0; i < pm->pm_stat_len; 4813 i += sizeof (uint32_t)) { 4814 *datap = READ_BAR2_REG(hba, 4815 hba->sli.sli4.bar2_addr + offset); 4816 datap++; 4817 offset += sizeof (uint32_t); 4818 } 4819 #ifdef FMA_SUPPORT 4820 /* Access handle validation */ 4821 EMLXS_CHK_ACC_HANDLE(hba, 4822 hba->sli.sli4.bar2_acc_handle); 4823 #endif /* FMA_SUPPORT */ 4824 break; 4825 case 4: /* bar1write */ 4826 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) { 4827 return (FC_BADCMD); 4828 } 4829 WRITE_BAR1_REG(hba, hba->sli.sli4.bar1_addr + 4830 offset, cmd[2]); 4831 #ifdef FMA_SUPPORT 4832 /* Access handle validation */ 4833 EMLXS_CHK_ACC_HANDLE(hba, 4834 hba->sli.sli4.bar1_acc_handle); 4835 #endif /* FMA_SUPPORT */ 4836 break; 4837 case 5: /* bar2write */ 4838 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) { 4839 return (FC_BADCMD); 4840 } 4841 WRITE_BAR2_REG(hba, hba->sli.sli4.bar2_addr + 4842 offset, cmd[2]); 4843 #ifdef FMA_SUPPORT 4844 /* Access handle validation */ 4845 EMLXS_CHK_ACC_HANDLE(hba, 4846 hba->sli.sli4.bar2_acc_handle); 4847 #endif /* FMA_SUPPORT */ 4848 break; 4849 case 6: /* dumpbsmbox */ 4850 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) { 4851 return (FC_BADCMD); 4852 } 4853 if (offset != 0) { 4854 return (FC_BADCMD); 4855 } 4856 4857 bcopy((caddr_t)hba->sli.sli4.bootstrapmb.virt, 4858 (caddr_t)pm->pm_stat_buf, 256); 4859 break; 4860 case 7: /* pciread */ 4861 if ((offset >= 0x200) || (offset & 0x3)) { 4862 return (FC_BADCMD); 4863 } 4864 datap = (uint32_t *)pm->pm_stat_buf; 4865 for (i = 0; i < pm->pm_stat_len; 4866 i += sizeof (uint32_t)) { 4867 *datap = ddi_get32(hba->pci_acc_handle, 4868 (uint32_t *)(hba->pci_addr + 4869 offset)); 4870 datap++; 4871 offset += sizeof (uint32_t); 4872 } 4873 #ifdef FMA_SUPPORT 4874 /* Access handle validation */ 4875 EMLXS_CHK_ACC_HANDLE(hba, hba->pci_acc_handle); 4876 #endif /* FMA_SUPPORT */ 4877 break; 4878 case 8: /* abortall */ 4879 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) { 4880 return (FC_BADCMD); 4881 } 4882 emlxs_abort_all(hba, &tx_cnt, &chip_cnt); 4883 datap = (uint32_t *)pm->pm_stat_buf; 4884 *datap++ = tx_cnt; 4885 *datap = chip_cnt; 4886 break; 4887 default: 4888 ret = FC_BADCMD; 4889 break; 4890 } 4891 break; 4892 } 4893 4894 default: 4895 4896 ret = FC_INVALID_REQUEST; 4897 break; 4898 } 4899 4900 break; 4901 4902 } 4903 4904 case FC_PORT_INITIALIZE: 4905 if (!(hba->flag & FC_ONLINE_MODE)) { 4906 return (FC_OFFLINE); 4907 } 4908 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4909 "fca_port_manage: FC_PORT_INITIALIZE"); 4910 break; 4911 4912 case FC_PORT_LOOPBACK: 4913 if (!(hba->flag & FC_ONLINE_MODE)) { 4914 return (FC_OFFLINE); 4915 } 4916 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4917 "fca_port_manage: FC_PORT_LOOPBACK"); 4918 break; 4919 4920 case FC_PORT_BYPASS: 4921 if (!(hba->flag & FC_ONLINE_MODE)) { 4922 return (FC_OFFLINE); 4923 } 4924 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4925 "fca_port_manage: FC_PORT_BYPASS"); 4926 ret = FC_INVALID_REQUEST; 4927 break; 4928 4929 case FC_PORT_UNBYPASS: 4930 if (!(hba->flag & FC_ONLINE_MODE)) { 4931 return (FC_OFFLINE); 4932 } 4933 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4934 "fca_port_manage: FC_PORT_UNBYPASS"); 4935 ret = FC_INVALID_REQUEST; 4936 break; 4937 4938 case FC_PORT_GET_NODE_ID: 4939 { 4940 fc_rnid_t *rnid; 4941 4942 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4943 "fca_port_manage: FC_PORT_GET_NODE_ID"); 4944 4945 bzero(pm->pm_data_buf, pm->pm_data_len); 4946 4947 if (pm->pm_data_len < sizeof (fc_rnid_t)) { 4948 ret = FC_NOMEM; 4949 break; 4950 } 4951 4952 rnid = (fc_rnid_t *)pm->pm_data_buf; 4953 4954 (void) sprintf((char *)rnid->global_id, 4955 "%01x%01x%02x%02x%02x%02x%02x%02x%02x", 4956 hba->wwpn.nameType, hba->wwpn.IEEEextMsn, 4957 hba->wwpn.IEEEextLsb, hba->wwpn.IEEE[0], 4958 hba->wwpn.IEEE[1], hba->wwpn.IEEE[2], hba->wwpn.IEEE[3], 4959 hba->wwpn.IEEE[4], hba->wwpn.IEEE[5]); 4960 4961 rnid->unit_type = RNID_HBA; 4962 rnid->port_id = port->did; 4963 rnid->ip_version = RNID_IPV4; 4964 4965 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4966 "GET_NODE_ID: wwpn: %s", rnid->global_id); 4967 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4968 "GET_NODE_ID: unit_type: 0x%x", rnid->unit_type); 4969 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4970 "GET_NODE_ID: port_id: 0x%x", rnid->port_id); 4971 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4972 "GET_NODE_ID: num_attach: %d", rnid->num_attached); 4973 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4974 "GET_NODE_ID: ip_version: 0x%x", rnid->ip_version); 4975 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4976 "GET_NODE_ID: udp_port: 0x%x", rnid->udp_port); 4977 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4978 "GET_NODE_ID: ip_addr: %s", rnid->ip_addr); 4979 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4980 "GET_NODE_ID: resv: 0x%x", rnid->specific_id_resv); 4981 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4982 "GET_NODE_ID: topo_flags: 0x%x", rnid->topo_flags); 4983 4984 ret = FC_SUCCESS; 4985 break; 4986 } 4987 4988 case FC_PORT_SET_NODE_ID: 4989 { 4990 fc_rnid_t *rnid; 4991 4992 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 4993 "fca_port_manage: FC_PORT_SET_NODE_ID"); 4994 4995 if (pm->pm_data_len < sizeof (fc_rnid_t)) { 4996 ret = FC_NOMEM; 4997 break; 4998 } 4999 5000 rnid = (fc_rnid_t *)pm->pm_data_buf; 5001 5002 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5003 "SET_NODE_ID: wwpn: %s", rnid->global_id); 5004 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5005 "SET_NODE_ID: unit_type: 0x%x", rnid->unit_type); 5006 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5007 "SET_NODE_ID: port_id: 0x%x", rnid->port_id); 5008 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5009 "SET_NODE_ID: num_attach: %d", rnid->num_attached); 5010 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5011 "SET_NODE_ID: ip_version: 0x%x", rnid->ip_version); 5012 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5013 "SET_NODE_ID: udp_port: 0x%x", rnid->udp_port); 5014 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5015 "SET_NODE_ID: ip_addr: %s", rnid->ip_addr); 5016 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5017 "SET_NODE_ID: resv: 0x%x", rnid->specific_id_resv); 5018 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5019 "SET_NODE_ID: topo_flags: 0x%x", rnid->topo_flags); 5020 5021 ret = FC_SUCCESS; 5022 break; 5023 } 5024 5025 #ifdef S11 5026 case FC_PORT_GET_P2P_INFO: 5027 { 5028 fc_fca_p2p_info_t *p2p_info; 5029 NODELIST *ndlp; 5030 5031 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5032 "fca_port_manage: FC_PORT_GET_P2P_INFO"); 5033 5034 bzero(pm->pm_data_buf, pm->pm_data_len); 5035 5036 if (pm->pm_data_len < sizeof (fc_fca_p2p_info_t)) { 5037 ret = FC_NOMEM; 5038 break; 5039 } 5040 5041 p2p_info = (fc_fca_p2p_info_t *)pm->pm_data_buf; 5042 5043 if (hba->state >= FC_LINK_UP) { 5044 if ((hba->topology == TOPOLOGY_PT_PT) && 5045 (hba->flag & FC_PT_TO_PT)) { 5046 p2p_info->fca_d_id = port->did; 5047 p2p_info->d_id = port->rdid; 5048 5049 ndlp = emlxs_node_find_did(port, 5050 port->rdid); 5051 5052 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5053 "FC_PORT_GET_P2P_INFO: fca_d_id: 0x%x, " 5054 "d_id: 0x%x, ndlp: 0x%p", port->did, 5055 port->rdid, ndlp); 5056 if (ndlp) { 5057 bcopy(&ndlp->nlp_portname, 5058 (caddr_t)&p2p_info->pwwn, 5059 sizeof (la_wwn_t)); 5060 bcopy(&ndlp->nlp_nodename, 5061 (caddr_t)&p2p_info->nwwn, 5062 sizeof (la_wwn_t)); 5063 5064 ret = FC_SUCCESS; 5065 break; 5066 5067 } 5068 } 5069 } 5070 5071 ret = FC_FAILURE; 5072 break; 5073 } 5074 #endif 5075 5076 default: 5077 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5078 "fca_port_manage: code=%x", pm->pm_cmd_code); 5079 ret = FC_INVALID_REQUEST; 5080 break; 5081 5082 } 5083 5084 return (ret); 5085 5086 } /* emlxs_port_manage() */ 5087 5088 5089 /*ARGSUSED*/ 5090 static uint32_t 5091 emlxs_test(emlxs_hba_t *hba, uint32_t test_code, uint32_t args, 5092 uint32_t *arg) 5093 { 5094 uint32_t rval = 0; 5095 emlxs_port_t *port = &PPORT; 5096 5097 switch (test_code) { 5098 #ifdef TEST_SUPPORT 5099 case 1: /* SCSI underrun */ 5100 { 5101 hba->underrun_counter = (args)? arg[0]:1; 5102 break; 5103 } 5104 #endif /* TEST_SUPPORT */ 5105 5106 default: 5107 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5108 "emlxs_test: Unsupported test code. (0x%x)", test_code); 5109 rval = FC_INVALID_REQUEST; 5110 } 5111 5112 return (rval); 5113 5114 } /* emlxs_test() */ 5115 5116 5117 /* 5118 * Given the device number, return the devinfo pointer or the ddiinst number. 5119 * Note: this routine must be successful on DDI_INFO_DEVT2INSTANCE even 5120 * before attach. 5121 * 5122 * Translate "dev_t" to a pointer to the associated "dev_info_t". 5123 */ 5124 /*ARGSUSED*/ 5125 static int 5126 emlxs_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) 5127 { 5128 emlxs_hba_t *hba; 5129 int32_t ddiinst; 5130 5131 ddiinst = getminor((dev_t)arg); 5132 5133 switch (infocmd) { 5134 case DDI_INFO_DEVT2DEVINFO: 5135 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 5136 if (hba) 5137 *result = hba->dip; 5138 else 5139 *result = NULL; 5140 break; 5141 5142 case DDI_INFO_DEVT2INSTANCE: 5143 *result = (void *)((unsigned long)ddiinst); 5144 break; 5145 5146 default: 5147 return (DDI_FAILURE); 5148 } 5149 5150 return (DDI_SUCCESS); 5151 5152 } /* emlxs_info() */ 5153 5154 5155 static int32_t 5156 emlxs_power(dev_info_t *dip, int32_t comp, int32_t level) 5157 { 5158 emlxs_hba_t *hba; 5159 emlxs_port_t *port; 5160 int32_t ddiinst; 5161 int rval = DDI_SUCCESS; 5162 5163 ddiinst = ddi_get_instance(dip); 5164 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 5165 port = &PPORT; 5166 5167 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 5168 "fca_power: comp=%x level=%x", comp, level); 5169 5170 if (hba == NULL || comp != EMLXS_PM_ADAPTER) { 5171 return (DDI_FAILURE); 5172 } 5173 5174 mutex_enter(&EMLXS_PM_LOCK); 5175 5176 /* If we are already at the proper level then return success */ 5177 if (hba->pm_level == level) { 5178 mutex_exit(&EMLXS_PM_LOCK); 5179 return (DDI_SUCCESS); 5180 } 5181 5182 switch (level) { 5183 case EMLXS_PM_ADAPTER_UP: 5184 5185 /* 5186 * If we are already in emlxs_attach, 5187 * let emlxs_hba_attach take care of things 5188 */ 5189 if (hba->pm_state & EMLXS_PM_IN_ATTACH) { 5190 hba->pm_level = EMLXS_PM_ADAPTER_UP; 5191 break; 5192 } 5193 5194 /* Check if adapter is suspended */ 5195 if (hba->pm_state & EMLXS_PM_SUSPENDED) { 5196 hba->pm_level = EMLXS_PM_ADAPTER_UP; 5197 5198 /* Try to resume the port */ 5199 rval = emlxs_hba_resume(dip); 5200 5201 if (rval != DDI_SUCCESS) { 5202 hba->pm_level = EMLXS_PM_ADAPTER_DOWN; 5203 } 5204 break; 5205 } 5206 5207 /* Set adapter up */ 5208 hba->pm_level = EMLXS_PM_ADAPTER_UP; 5209 break; 5210 5211 case EMLXS_PM_ADAPTER_DOWN: 5212 5213 5214 /* 5215 * If we are already in emlxs_detach, 5216 * let emlxs_hba_detach take care of things 5217 */ 5218 if (hba->pm_state & EMLXS_PM_IN_DETACH) { 5219 hba->pm_level = EMLXS_PM_ADAPTER_DOWN; 5220 break; 5221 } 5222 5223 /* Check if adapter is not suspended */ 5224 if (!(hba->pm_state & EMLXS_PM_SUSPENDED)) { 5225 hba->pm_level = EMLXS_PM_ADAPTER_DOWN; 5226 5227 /* Try to suspend the port */ 5228 rval = emlxs_hba_suspend(dip); 5229 5230 if (rval != DDI_SUCCESS) { 5231 hba->pm_level = EMLXS_PM_ADAPTER_UP; 5232 } 5233 5234 break; 5235 } 5236 5237 /* Set adapter down */ 5238 hba->pm_level = EMLXS_PM_ADAPTER_DOWN; 5239 break; 5240 5241 default: 5242 rval = DDI_FAILURE; 5243 break; 5244 5245 } 5246 5247 mutex_exit(&EMLXS_PM_LOCK); 5248 5249 return (rval); 5250 5251 } /* emlxs_power() */ 5252 5253 5254 #ifdef EMLXS_I386 5255 #ifdef S11 5256 /* 5257 * quiesce(9E) entry point. 5258 * 5259 * This function is called when the system is single-thread at hight PIL 5260 * with preemption disabled. Therefore, this function must not be blocked. 5261 * 5262 * This function returns DDI_SUCCESS on success, or DDI_FAILURE on failure. 5263 * DDI_FAILURE indicates an error condition and should almost never happen. 5264 */ 5265 static int 5266 emlxs_quiesce(dev_info_t *dip) 5267 { 5268 emlxs_hba_t *hba; 5269 emlxs_port_t *port; 5270 int32_t ddiinst; 5271 int rval = DDI_SUCCESS; 5272 5273 ddiinst = ddi_get_instance(dip); 5274 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 5275 port = &PPORT; 5276 5277 if (hba == NULL || port == NULL) { 5278 return (DDI_FAILURE); 5279 } 5280 5281 /* The fourth arg 1 indicates the call is from quiesce */ 5282 if (EMLXS_SLI_HBA_RESET(hba, 1, 1, 1) == 0) { 5283 return (rval); 5284 } else { 5285 return (DDI_FAILURE); 5286 } 5287 5288 } /* emlxs_quiesce */ 5289 #endif 5290 #endif /* EMLXS_I386 */ 5291 5292 5293 static int 5294 emlxs_open(dev_t *dev_p, int32_t flag, int32_t otype, cred_t *cred_p) 5295 { 5296 emlxs_hba_t *hba; 5297 emlxs_port_t *port; 5298 int ddiinst; 5299 5300 ddiinst = getminor(*dev_p); 5301 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 5302 5303 if (hba == NULL) { 5304 return (ENXIO); 5305 } 5306 5307 port = &PPORT; 5308 5309 if (hba->pm_state & EMLXS_PM_SUSPENDED) { 5310 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ioctl_detail_msg, 5311 "open failed: Driver suspended."); 5312 return (ENXIO); 5313 } 5314 5315 if (otype != OTYP_CHR) { 5316 return (EINVAL); 5317 } 5318 5319 if (drv_priv(cred_p)) { 5320 return (EPERM); 5321 } 5322 5323 mutex_enter(&EMLXS_IOCTL_LOCK); 5324 5325 if (hba->ioctl_flags & EMLXS_OPEN_EXCLUSIVE) { 5326 mutex_exit(&EMLXS_IOCTL_LOCK); 5327 return (EBUSY); 5328 } 5329 5330 if (flag & FEXCL) { 5331 if (hba->ioctl_flags & EMLXS_OPEN) { 5332 mutex_exit(&EMLXS_IOCTL_LOCK); 5333 return (EBUSY); 5334 } 5335 5336 hba->ioctl_flags |= EMLXS_OPEN_EXCLUSIVE; 5337 } 5338 5339 hba->ioctl_flags |= EMLXS_OPEN; 5340 5341 mutex_exit(&EMLXS_IOCTL_LOCK); 5342 5343 return (0); 5344 5345 } /* emlxs_open() */ 5346 5347 5348 /*ARGSUSED*/ 5349 static int 5350 emlxs_close(dev_t dev, int32_t flag, int32_t otype, cred_t *cred_p) 5351 { 5352 emlxs_hba_t *hba; 5353 int ddiinst; 5354 5355 ddiinst = getminor(dev); 5356 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 5357 5358 if (hba == NULL) { 5359 return (ENXIO); 5360 } 5361 5362 if (otype != OTYP_CHR) { 5363 return (EINVAL); 5364 } 5365 5366 mutex_enter(&EMLXS_IOCTL_LOCK); 5367 5368 if (!(hba->ioctl_flags & EMLXS_OPEN)) { 5369 mutex_exit(&EMLXS_IOCTL_LOCK); 5370 return (ENODEV); 5371 } 5372 5373 hba->ioctl_flags &= ~EMLXS_OPEN; 5374 hba->ioctl_flags &= ~EMLXS_OPEN_EXCLUSIVE; 5375 5376 mutex_exit(&EMLXS_IOCTL_LOCK); 5377 5378 return (0); 5379 5380 } /* emlxs_close() */ 5381 5382 5383 /*ARGSUSED*/ 5384 static int 5385 emlxs_ioctl(dev_t dev, int32_t cmd, intptr_t arg, int32_t mode, 5386 cred_t *cred_p, int32_t *rval_p) 5387 { 5388 emlxs_hba_t *hba; 5389 emlxs_port_t *port; 5390 int rval = 0; /* return code */ 5391 int ddiinst; 5392 5393 ddiinst = getminor(dev); 5394 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 5395 5396 if (hba == NULL) { 5397 return (ENXIO); 5398 } 5399 5400 port = &PPORT; 5401 5402 if (hba->pm_state & EMLXS_PM_SUSPENDED) { 5403 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ioctl_detail_msg, 5404 "ioctl failed: Driver suspended."); 5405 5406 return (ENXIO); 5407 } 5408 5409 mutex_enter(&EMLXS_IOCTL_LOCK); 5410 if (!(hba->ioctl_flags & EMLXS_OPEN)) { 5411 mutex_exit(&EMLXS_IOCTL_LOCK); 5412 return (ENXIO); 5413 } 5414 mutex_exit(&EMLXS_IOCTL_LOCK); 5415 5416 #ifdef IDLE_TIMER 5417 emlxs_pm_busy_component(hba); 5418 #endif /* IDLE_TIMER */ 5419 5420 switch (cmd) { 5421 case EMLXS_DFC_COMMAND: 5422 rval = emlxs_dfc_manage(hba, (void *)arg, mode); 5423 break; 5424 5425 default: 5426 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ioctl_detail_msg, 5427 "ioctl: Invalid command received. cmd=%x", cmd); 5428 rval = EINVAL; 5429 } 5430 5431 done: 5432 return (rval); 5433 5434 } /* emlxs_ioctl() */ 5435 5436 5437 5438 /* 5439 * 5440 * Device Driver Common Routines 5441 * 5442 */ 5443 5444 /* EMLXS_PM_LOCK must be held for this call */ 5445 static int 5446 emlxs_hba_resume(dev_info_t *dip) 5447 { 5448 emlxs_hba_t *hba; 5449 emlxs_port_t *port; 5450 int ddiinst; 5451 5452 ddiinst = ddi_get_instance(dip); 5453 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 5454 port = &PPORT; 5455 5456 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_resume_msg, NULL); 5457 5458 if (!(hba->pm_state & EMLXS_PM_SUSPENDED)) { 5459 return (DDI_SUCCESS); 5460 } 5461 5462 hba->pm_state &= ~EMLXS_PM_SUSPENDED; 5463 5464 /* Take the adapter online */ 5465 if (emlxs_power_up(hba)) { 5466 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_resume_failed_msg, 5467 "Unable to take adapter online."); 5468 5469 hba->pm_state |= EMLXS_PM_SUSPENDED; 5470 5471 return (DDI_FAILURE); 5472 } 5473 5474 return (DDI_SUCCESS); 5475 5476 } /* emlxs_hba_resume() */ 5477 5478 5479 /* EMLXS_PM_LOCK must be held for this call */ 5480 static int 5481 emlxs_hba_suspend(dev_info_t *dip) 5482 { 5483 emlxs_hba_t *hba; 5484 emlxs_port_t *port; 5485 int ddiinst; 5486 5487 ddiinst = ddi_get_instance(dip); 5488 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 5489 port = &PPORT; 5490 5491 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_suspend_msg, NULL); 5492 5493 if (hba->pm_state & EMLXS_PM_SUSPENDED) { 5494 return (DDI_SUCCESS); 5495 } 5496 5497 hba->pm_state |= EMLXS_PM_SUSPENDED; 5498 5499 /* Take the adapter offline */ 5500 if (emlxs_power_down(hba)) { 5501 hba->pm_state &= ~EMLXS_PM_SUSPENDED; 5502 5503 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_suspend_failed_msg, 5504 "Unable to take adapter offline."); 5505 5506 return (DDI_FAILURE); 5507 } 5508 5509 return (DDI_SUCCESS); 5510 5511 } /* emlxs_hba_suspend() */ 5512 5513 5514 5515 static void 5516 emlxs_lock_init(emlxs_hba_t *hba) 5517 { 5518 emlxs_port_t *port = &PPORT; 5519 int32_t ddiinst; 5520 char buf[64]; 5521 uint32_t i; 5522 5523 ddiinst = hba->ddiinst; 5524 5525 /* Initialize the power management */ 5526 (void) sprintf(buf, "%s%d_pm_lock mutex", DRIVER_NAME, ddiinst); 5527 mutex_init(&EMLXS_PM_LOCK, buf, MUTEX_DRIVER, 5528 (void *)hba->intr_arg); 5529 5530 (void) sprintf(buf, "%s%d_adap_lock mutex", DRIVER_NAME, ddiinst); 5531 mutex_init(&EMLXS_TIMER_LOCK, buf, MUTEX_DRIVER, 5532 (void *)hba->intr_arg); 5533 5534 (void) sprintf(buf, "%s%d_adap_lock cv", DRIVER_NAME, ddiinst); 5535 cv_init(&hba->timer_lock_cv, buf, CV_DRIVER, NULL); 5536 5537 (void) sprintf(buf, "%s%d_port_lock mutex", DRIVER_NAME, ddiinst); 5538 mutex_init(&EMLXS_PORT_LOCK, buf, MUTEX_DRIVER, 5539 (void *)hba->intr_arg); 5540 5541 (void) sprintf(buf, "%s%d_mbox_lock mutex", DRIVER_NAME, ddiinst); 5542 mutex_init(&EMLXS_MBOX_LOCK, buf, MUTEX_DRIVER, 5543 (void *)hba->intr_arg); 5544 5545 (void) sprintf(buf, "%s%d_mbox_lock cv", DRIVER_NAME, ddiinst); 5546 cv_init(&EMLXS_MBOX_CV, buf, CV_DRIVER, NULL); 5547 5548 (void) sprintf(buf, "%s%d_linkup_lock mutex", DRIVER_NAME, ddiinst); 5549 mutex_init(&EMLXS_LINKUP_LOCK, buf, MUTEX_DRIVER, 5550 (void *)hba->intr_arg); 5551 5552 (void) sprintf(buf, "%s%d_linkup_lock cv", DRIVER_NAME, ddiinst); 5553 cv_init(&EMLXS_LINKUP_CV, buf, CV_DRIVER, NULL); 5554 5555 (void) sprintf(buf, "%s%d_ring_tx_lock mutex", DRIVER_NAME, ddiinst); 5556 mutex_init(&EMLXS_TX_CHANNEL_LOCK, buf, MUTEX_DRIVER, 5557 (void *)hba->intr_arg); 5558 5559 for (i = 0; i < MAX_RINGS; i++) { 5560 (void) sprintf(buf, "%s%d_cmd_ring%d_lock mutex", DRIVER_NAME, 5561 ddiinst, i); 5562 mutex_init(&EMLXS_CMD_RING_LOCK(i), buf, MUTEX_DRIVER, 5563 (void *)hba->intr_arg); 5564 } 5565 5566 (void) sprintf(buf, "%s%d_fctab_lock mutex", DRIVER_NAME, ddiinst); 5567 mutex_init(&EMLXS_FCTAB_LOCK, buf, MUTEX_DRIVER, 5568 (void *)hba->intr_arg); 5569 5570 (void) sprintf(buf, "%s%d_memget_lock mutex", DRIVER_NAME, ddiinst); 5571 mutex_init(&EMLXS_MEMGET_LOCK, buf, MUTEX_DRIVER, 5572 (void *)hba->intr_arg); 5573 5574 (void) sprintf(buf, "%s%d_memput_lock mutex", DRIVER_NAME, ddiinst); 5575 mutex_init(&EMLXS_MEMPUT_LOCK, buf, MUTEX_DRIVER, 5576 (void *)hba->intr_arg); 5577 5578 (void) sprintf(buf, "%s%d_ioctl_lock mutex", DRIVER_NAME, ddiinst); 5579 mutex_init(&EMLXS_IOCTL_LOCK, buf, MUTEX_DRIVER, 5580 (void *)hba->intr_arg); 5581 5582 #ifdef DUMP_SUPPORT 5583 (void) sprintf(buf, "%s%d_dump mutex", DRIVER_NAME, ddiinst); 5584 mutex_init(&EMLXS_DUMP_LOCK, buf, MUTEX_DRIVER, 5585 (void *)hba->intr_arg); 5586 #endif /* DUMP_SUPPORT */ 5587 5588 (void) sprintf(buf, "%s%d_thread_lock mutex", DRIVER_NAME, ddiinst); 5589 mutex_init(&EMLXS_SPAWN_LOCK, buf, MUTEX_DRIVER, 5590 (void *)hba->intr_arg); 5591 5592 /* Create per port locks */ 5593 for (i = 0; i < MAX_VPORTS; i++) { 5594 port = &VPORT(i); 5595 5596 rw_init(&port->node_rwlock, NULL, RW_DRIVER, NULL); 5597 5598 if (i == 0) { 5599 (void) sprintf(buf, "%s%d_pkt_lock mutex", DRIVER_NAME, 5600 ddiinst); 5601 mutex_init(&EMLXS_PKT_LOCK, buf, MUTEX_DRIVER, 5602 (void *)hba->intr_arg); 5603 5604 (void) sprintf(buf, "%s%d_pkt_lock cv", DRIVER_NAME, 5605 ddiinst); 5606 cv_init(&EMLXS_PKT_CV, buf, CV_DRIVER, NULL); 5607 5608 (void) sprintf(buf, "%s%d_ub_lock mutex", DRIVER_NAME, 5609 ddiinst); 5610 mutex_init(&EMLXS_UB_LOCK, buf, MUTEX_DRIVER, 5611 (void *)hba->intr_arg); 5612 } else { 5613 (void) sprintf(buf, "%s%d.%d_pkt_lock mutex", 5614 DRIVER_NAME, ddiinst, port->vpi); 5615 mutex_init(&EMLXS_PKT_LOCK, buf, MUTEX_DRIVER, 5616 (void *)hba->intr_arg); 5617 5618 (void) sprintf(buf, "%s%d.%d_pkt_lock cv", DRIVER_NAME, 5619 ddiinst, port->vpi); 5620 cv_init(&EMLXS_PKT_CV, buf, CV_DRIVER, NULL); 5621 5622 (void) sprintf(buf, "%s%d.%d_ub_lock mutex", 5623 DRIVER_NAME, ddiinst, port->vpi); 5624 mutex_init(&EMLXS_UB_LOCK, buf, MUTEX_DRIVER, 5625 (void *)hba->intr_arg); 5626 } 5627 } 5628 5629 return; 5630 5631 } /* emlxs_lock_init() */ 5632 5633 5634 5635 static void 5636 emlxs_lock_destroy(emlxs_hba_t *hba) 5637 { 5638 emlxs_port_t *port = &PPORT; 5639 uint32_t i; 5640 5641 mutex_destroy(&EMLXS_TIMER_LOCK); 5642 cv_destroy(&hba->timer_lock_cv); 5643 5644 mutex_destroy(&EMLXS_PORT_LOCK); 5645 5646 cv_destroy(&EMLXS_MBOX_CV); 5647 cv_destroy(&EMLXS_LINKUP_CV); 5648 5649 mutex_destroy(&EMLXS_LINKUP_LOCK); 5650 mutex_destroy(&EMLXS_MBOX_LOCK); 5651 5652 mutex_destroy(&EMLXS_TX_CHANNEL_LOCK); 5653 5654 for (i = 0; i < MAX_RINGS; i++) { 5655 mutex_destroy(&EMLXS_CMD_RING_LOCK(i)); 5656 } 5657 5658 mutex_destroy(&EMLXS_FCTAB_LOCK); 5659 mutex_destroy(&EMLXS_MEMGET_LOCK); 5660 mutex_destroy(&EMLXS_MEMPUT_LOCK); 5661 mutex_destroy(&EMLXS_IOCTL_LOCK); 5662 mutex_destroy(&EMLXS_SPAWN_LOCK); 5663 mutex_destroy(&EMLXS_PM_LOCK); 5664 5665 #ifdef DUMP_SUPPORT 5666 mutex_destroy(&EMLXS_DUMP_LOCK); 5667 #endif /* DUMP_SUPPORT */ 5668 5669 /* Destroy per port locks */ 5670 for (i = 0; i < MAX_VPORTS; i++) { 5671 port = &VPORT(i); 5672 rw_destroy(&port->node_rwlock); 5673 mutex_destroy(&EMLXS_PKT_LOCK); 5674 cv_destroy(&EMLXS_PKT_CV); 5675 mutex_destroy(&EMLXS_UB_LOCK); 5676 } 5677 5678 return; 5679 5680 } /* emlxs_lock_destroy() */ 5681 5682 5683 /* init_flag values */ 5684 #define ATTACH_SOFT_STATE 0x00000001 5685 #define ATTACH_FCA_TRAN 0x00000002 5686 #define ATTACH_HBA 0x00000004 5687 #define ATTACH_LOG 0x00000008 5688 #define ATTACH_MAP_BUS 0x00000010 5689 #define ATTACH_INTR_INIT 0x00000020 5690 #define ATTACH_PROP 0x00000040 5691 #define ATTACH_LOCK 0x00000080 5692 #define ATTACH_THREAD 0x00000100 5693 #define ATTACH_INTR_ADD 0x00000200 5694 #define ATTACH_ONLINE 0x00000400 5695 #define ATTACH_NODE 0x00000800 5696 #define ATTACH_FCT 0x00001000 5697 #define ATTACH_FCA 0x00002000 5698 #define ATTACH_KSTAT 0x00004000 5699 #define ATTACH_DHCHAP 0x00008000 5700 #define ATTACH_FM 0x00010000 5701 #define ATTACH_MAP_SLI 0x00020000 5702 #define ATTACH_SPAWN 0x00040000 5703 #define ATTACH_EVENTS 0x00080000 5704 5705 static void 5706 emlxs_driver_remove(dev_info_t *dip, uint32_t init_flag, uint32_t failed) 5707 { 5708 emlxs_hba_t *hba = NULL; 5709 int ddiinst; 5710 5711 ddiinst = ddi_get_instance(dip); 5712 5713 if (init_flag & ATTACH_HBA) { 5714 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 5715 5716 if (init_flag & ATTACH_SPAWN) { 5717 emlxs_thread_spawn_destroy(hba); 5718 } 5719 5720 if (init_flag & ATTACH_EVENTS) { 5721 (void) emlxs_event_queue_destroy(hba); 5722 } 5723 5724 if (init_flag & ATTACH_ONLINE) { 5725 (void) emlxs_offline(hba); 5726 } 5727 5728 if (init_flag & ATTACH_INTR_ADD) { 5729 (void) EMLXS_INTR_REMOVE(hba); 5730 } 5731 #ifdef SFCT_SUPPORT 5732 if (init_flag & ATTACH_FCT) { 5733 emlxs_fct_detach(hba); 5734 emlxs_fct_modclose(); 5735 } 5736 #endif /* SFCT_SUPPORT */ 5737 5738 #ifdef DHCHAP_SUPPORT 5739 if (init_flag & ATTACH_DHCHAP) { 5740 emlxs_dhc_detach(hba); 5741 } 5742 #endif /* DHCHAP_SUPPORT */ 5743 5744 if (init_flag & ATTACH_KSTAT) { 5745 kstat_delete(hba->kstat); 5746 } 5747 5748 if (init_flag & ATTACH_FCA) { 5749 emlxs_fca_detach(hba); 5750 } 5751 5752 if (init_flag & ATTACH_NODE) { 5753 (void) ddi_remove_minor_node(hba->dip, "devctl"); 5754 } 5755 5756 if (init_flag & ATTACH_THREAD) { 5757 emlxs_thread_destroy(&hba->iodone_thread); 5758 } 5759 5760 if (init_flag & ATTACH_PROP) { 5761 (void) ddi_prop_remove_all(hba->dip); 5762 } 5763 5764 if (init_flag & ATTACH_LOCK) { 5765 emlxs_lock_destroy(hba); 5766 } 5767 5768 if (init_flag & ATTACH_INTR_INIT) { 5769 (void) EMLXS_INTR_UNINIT(hba); 5770 } 5771 5772 if (init_flag & ATTACH_MAP_BUS) { 5773 emlxs_unmap_bus(hba); 5774 } 5775 5776 if (init_flag & ATTACH_MAP_SLI) { 5777 EMLXS_SLI_UNMAP_HDW(hba); 5778 } 5779 5780 #ifdef FMA_SUPPORT 5781 if (init_flag & ATTACH_FM) { 5782 emlxs_fm_fini(hba); 5783 } 5784 #endif /* FMA_SUPPORT */ 5785 5786 if (init_flag & ATTACH_LOG) { 5787 (void) emlxs_msg_log_destroy(hba); 5788 } 5789 5790 if (init_flag & ATTACH_FCA_TRAN) { 5791 (void) ddi_set_driver_private(hba->dip, NULL); 5792 kmem_free(hba->fca_tran, sizeof (fc_fca_tran_t)); 5793 hba->fca_tran = NULL; 5794 } 5795 5796 if (init_flag & ATTACH_HBA) { 5797 emlxs_device.log[hba->emlxinst] = 0; 5798 emlxs_device.hba[hba->emlxinst] = 5799 (emlxs_hba_t *)((unsigned long)((failed) ? -1 : 0)); 5800 #ifdef DUMP_SUPPORT 5801 emlxs_device.dump_txtfile[hba->emlxinst] = 0; 5802 emlxs_device.dump_dmpfile[hba->emlxinst] = 0; 5803 emlxs_device.dump_ceefile[hba->emlxinst] = 0; 5804 #endif /* DUMP_SUPPORT */ 5805 5806 } 5807 } 5808 5809 if (init_flag & ATTACH_SOFT_STATE) { 5810 (void) ddi_soft_state_free(emlxs_soft_state, ddiinst); 5811 } 5812 5813 return; 5814 5815 } /* emlxs_driver_remove() */ 5816 5817 5818 5819 /* This determines which ports will be initiator mode */ 5820 static void 5821 emlxs_fca_init(emlxs_hba_t *hba) 5822 { 5823 emlxs_port_t *port = &PPORT; 5824 emlxs_port_t *vport; 5825 uint32_t i; 5826 5827 if (!hba->ini_mode) { 5828 return; 5829 } 5830 /* Check if SFS present */ 5831 if (((void *)MODSYM(fc_fca_init) == NULL) || 5832 ((void *)MODSYM(fc_fca_attach) == NULL)) { 5833 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 5834 "SFS not present. Initiator mode disabled."); 5835 goto failed; 5836 } 5837 5838 /* Check if our SFS driver interface matches the current SFS stack */ 5839 if (MODSYM(fc_fca_attach) (hba->dip, hba->fca_tran) != DDI_SUCCESS) { 5840 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 5841 "SFS/FCA version mismatch. FCA=0x%x", 5842 hba->fca_tran->fca_version); 5843 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 5844 "SFS present. Initiator mode disabled."); 5845 5846 goto failed; 5847 } 5848 5849 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 5850 "SFS present. Initiator mode enabled."); 5851 5852 return; 5853 5854 failed: 5855 5856 hba->ini_mode = 0; 5857 for (i = 0; i < MAX_VPORTS; i++) { 5858 vport = &VPORT(i); 5859 vport->ini_mode = 0; 5860 } 5861 5862 return; 5863 5864 } /* emlxs_fca_init() */ 5865 5866 5867 /* This determines which ports will be initiator or target mode */ 5868 static void 5869 emlxs_set_mode(emlxs_hba_t *hba) 5870 { 5871 emlxs_port_t *port = &PPORT; 5872 emlxs_port_t *vport; 5873 uint32_t i; 5874 uint32_t tgt_mode = 0; 5875 5876 #ifdef SFCT_SUPPORT 5877 emlxs_config_t *cfg; 5878 5879 cfg = &hba->config[CFG_TARGET_MODE]; 5880 tgt_mode = cfg->current; 5881 5882 if (tgt_mode) { 5883 if (emlxs_fct_modopen() != 0) { 5884 tgt_mode = 0; 5885 } 5886 } 5887 5888 port->fct_flags = 0; 5889 #endif /* SFCT_SUPPORT */ 5890 5891 /* Initialize physical port */ 5892 if (tgt_mode) { 5893 hba->tgt_mode = 1; 5894 hba->ini_mode = 0; 5895 5896 port->tgt_mode = 1; 5897 port->ini_mode = 0; 5898 } else { 5899 hba->tgt_mode = 0; 5900 hba->ini_mode = 1; 5901 5902 port->tgt_mode = 0; 5903 port->ini_mode = 1; 5904 } 5905 5906 /* Initialize virtual ports */ 5907 /* Virtual ports take on the mode of the parent physical port */ 5908 for (i = 1; i < MAX_VPORTS; i++) { 5909 vport = &VPORT(i); 5910 5911 #ifdef SFCT_SUPPORT 5912 vport->fct_flags = 0; 5913 #endif /* SFCT_SUPPORT */ 5914 5915 vport->ini_mode = port->ini_mode; 5916 vport->tgt_mode = port->tgt_mode; 5917 } 5918 5919 /* Check if initiator mode is requested */ 5920 if (hba->ini_mode) { 5921 emlxs_fca_init(hba); 5922 } else { 5923 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 5924 "Initiator mode not enabled."); 5925 } 5926 5927 #ifdef SFCT_SUPPORT 5928 /* Check if target mode is requested */ 5929 if (hba->tgt_mode) { 5930 emlxs_fct_init(hba); 5931 } else { 5932 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 5933 "Target mode not enabled."); 5934 } 5935 #endif /* SFCT_SUPPORT */ 5936 5937 return; 5938 5939 } /* emlxs_set_mode() */ 5940 5941 5942 5943 static void 5944 emlxs_fca_attach(emlxs_hba_t *hba) 5945 { 5946 /* Update our transport structure */ 5947 hba->fca_tran->fca_iblock = (ddi_iblock_cookie_t *)&hba->intr_arg; 5948 hba->fca_tran->fca_cmd_max = hba->io_throttle; 5949 5950 #if (EMLXS_MODREV >= EMLXS_MODREV5) 5951 bcopy((caddr_t)&hba->wwpn, (caddr_t)&hba->fca_tran->fca_perm_pwwn, 5952 sizeof (NAME_TYPE)); 5953 #endif /* >= EMLXS_MODREV5 */ 5954 5955 return; 5956 5957 } /* emlxs_fca_attach() */ 5958 5959 5960 static void 5961 emlxs_fca_detach(emlxs_hba_t *hba) 5962 { 5963 uint32_t i; 5964 emlxs_port_t *vport; 5965 5966 if (hba->ini_mode) { 5967 if ((void *)MODSYM(fc_fca_detach) != NULL) { 5968 MODSYM(fc_fca_detach)(hba->dip); 5969 } 5970 5971 hba->ini_mode = 0; 5972 5973 for (i = 0; i < MAX_VPORTS; i++) { 5974 vport = &VPORT(i); 5975 vport->ini_mode = 0; 5976 } 5977 } 5978 5979 return; 5980 5981 } /* emlxs_fca_detach() */ 5982 5983 5984 5985 static void 5986 emlxs_drv_banner(emlxs_hba_t *hba) 5987 { 5988 emlxs_port_t *port = &PPORT; 5989 uint32_t i; 5990 char sli_mode[16]; 5991 char msi_mode[16]; 5992 char npiv_mode[16]; 5993 emlxs_vpd_t *vpd = &VPD; 5994 emlxs_config_t *cfg = &CFG; 5995 uint8_t *wwpn; 5996 uint8_t *wwnn; 5997 5998 /* Display firmware library one time */ 5999 if (emlxs_instance_count == 1) { 6000 emlxs_fw_show(hba); 6001 } 6002 6003 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, "%s (%s)", emlxs_label, 6004 emlxs_revision); 6005 6006 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, 6007 "%s Dev_id:%x Sub_id:%x Id:%d", hba->model_info.model, 6008 hba->model_info.device_id, hba->model_info.ssdid, 6009 hba->model_info.id); 6010 6011 #ifdef EMLXS_I386 6012 6013 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, 6014 "Firmware:%s (%s) Boot:%s", vpd->fw_version, vpd->fw_label, 6015 vpd->boot_version); 6016 6017 #else /* EMLXS_SPARC */ 6018 6019 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, 6020 "Firmware:%s (%s) Boot:%s Fcode:%s", vpd->fw_version, 6021 vpd->fw_label, vpd->boot_version, vpd->fcode_version); 6022 6023 #endif /* EMLXS_I386 */ 6024 6025 if (hba->sli_mode > 3) { 6026 (void) sprintf(sli_mode, "SLI:%d(%s)", hba->sli_mode, 6027 ((hba->flag & FC_FIP_SUPPORTED) ? "FIP" : "nonFIP")); 6028 } else { 6029 (void) sprintf(sli_mode, "SLI:%d", hba->sli_mode); 6030 } 6031 6032 (void) strcpy(msi_mode, " INTX:1"); 6033 6034 #ifdef MSI_SUPPORT 6035 if (hba->intr_flags & EMLXS_MSI_ENABLED) { 6036 switch (hba->intr_type) { 6037 case DDI_INTR_TYPE_FIXED: 6038 (void) strcpy(msi_mode, " MSI:0"); 6039 break; 6040 6041 case DDI_INTR_TYPE_MSI: 6042 (void) sprintf(msi_mode, " MSI:%d", hba->intr_count); 6043 break; 6044 6045 case DDI_INTR_TYPE_MSIX: 6046 (void) sprintf(msi_mode, " MSIX:%d", hba->intr_count); 6047 break; 6048 } 6049 } 6050 #endif 6051 6052 (void) strcpy(npiv_mode, ""); 6053 6054 if (hba->flag & FC_NPIV_ENABLED) { 6055 (void) sprintf(npiv_mode, " NPIV:%d", hba->vpi_max+1); 6056 } else { 6057 (void) strcpy(npiv_mode, " NPIV:0"); 6058 } 6059 6060 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, "%s%s%s%s%s", 6061 sli_mode, msi_mode, npiv_mode, 6062 ((hba->ini_mode)? " FCA":""), ((hba->tgt_mode)? " FCT":"")); 6063 6064 wwpn = (uint8_t *)&hba->wwpn; 6065 wwnn = (uint8_t *)&hba->wwnn; 6066 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, 6067 "WWPN:%02X%02X%02X%02X%02X%02X%02X%02X " 6068 "WWNN:%02X%02X%02X%02X%02X%02X%02X%02X", 6069 wwpn[0], wwpn[1], wwpn[2], wwpn[3], wwpn[4], wwpn[5], wwpn[6], 6070 wwpn[7], wwnn[0], wwnn[1], wwnn[2], wwnn[3], wwnn[4], wwnn[5], 6071 wwnn[6], wwnn[7]); 6072 6073 for (i = 0; i < MAX_VPORTS; i++) { 6074 port = &VPORT(i); 6075 6076 if (!(port->flag & EMLXS_PORT_CONFIG)) { 6077 continue; 6078 } 6079 6080 wwpn = (uint8_t *)&port->wwpn; 6081 wwnn = (uint8_t *)&port->wwnn; 6082 6083 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, 6084 "WWPN:%02X%02X%02X%02X%02X%02X%02X%02X " 6085 "WWNN:%02X%02X%02X%02X%02X%02X%02X%02X", 6086 wwpn[0], wwpn[1], wwpn[2], wwpn[3], wwpn[4], wwpn[5], 6087 wwpn[6], wwpn[7], wwnn[0], wwnn[1], wwnn[2], wwnn[3], 6088 wwnn[4], wwnn[5], wwnn[6], wwnn[7]); 6089 } 6090 port = &PPORT; 6091 6092 /* 6093 * No dependency for Restricted login parameter. 6094 */ 6095 if ((cfg[CFG_VPORT_RESTRICTED].current) && (port->ini_mode)) { 6096 port->flag |= EMLXS_PORT_RESTRICTED; 6097 } else { 6098 port->flag &= ~EMLXS_PORT_RESTRICTED; 6099 } 6100 6101 /* 6102 * Announce the device: ddi_report_dev() prints a banner at boot time, 6103 * announcing the device pointed to by dip. 6104 */ 6105 (void) ddi_report_dev(hba->dip); 6106 6107 return; 6108 6109 } /* emlxs_drv_banner() */ 6110 6111 6112 extern void 6113 emlxs_get_fcode_version(emlxs_hba_t *hba) 6114 { 6115 emlxs_vpd_t *vpd = &VPD; 6116 char *prop_str; 6117 int status; 6118 6119 /* Setup fcode version property */ 6120 prop_str = NULL; 6121 status = 6122 ddi_prop_lookup_string(DDI_DEV_T_ANY, (dev_info_t *)hba->dip, 0, 6123 "fcode-version", (char **)&prop_str); 6124 6125 if (status == DDI_PROP_SUCCESS) { 6126 bcopy(prop_str, vpd->fcode_version, strlen(prop_str)); 6127 (void) ddi_prop_free((void *)prop_str); 6128 } else { 6129 (void) strcpy(vpd->fcode_version, "none"); 6130 } 6131 6132 return; 6133 6134 } /* emlxs_get_fcode_version() */ 6135 6136 6137 static int 6138 emlxs_hba_attach(dev_info_t *dip) 6139 { 6140 emlxs_hba_t *hba; 6141 emlxs_port_t *port; 6142 emlxs_config_t *cfg; 6143 char *prop_str; 6144 int ddiinst; 6145 int32_t emlxinst; 6146 int status; 6147 uint32_t rval; 6148 uint32_t init_flag = 0; 6149 char local_pm_components[32]; 6150 #ifdef EMLXS_I386 6151 uint32_t i; 6152 #endif /* EMLXS_I386 */ 6153 6154 ddiinst = ddi_get_instance(dip); 6155 emlxinst = emlxs_add_instance(ddiinst); 6156 6157 if (emlxinst >= MAX_FC_BRDS) { 6158 cmn_err(CE_WARN, 6159 "?%s: fca_hba_attach failed. Too many driver ddiinsts. " 6160 "inst=%x", DRIVER_NAME, ddiinst); 6161 return (DDI_FAILURE); 6162 } 6163 6164 if (emlxs_device.hba[emlxinst] == (emlxs_hba_t *)-1) { 6165 return (DDI_FAILURE); 6166 } 6167 6168 if (emlxs_device.hba[emlxinst]) { 6169 return (DDI_SUCCESS); 6170 } 6171 6172 /* An adapter can accidentally be plugged into a slave-only PCI slot */ 6173 if (ddi_slaveonly(dip) == DDI_SUCCESS) { 6174 cmn_err(CE_WARN, 6175 "?%s%d: fca_hba_attach failed. Device in slave-only slot.", 6176 DRIVER_NAME, ddiinst); 6177 return (DDI_FAILURE); 6178 } 6179 6180 /* Allocate emlxs_dev_ctl structure. */ 6181 if (ddi_soft_state_zalloc(emlxs_soft_state, ddiinst) != DDI_SUCCESS) { 6182 cmn_err(CE_WARN, 6183 "?%s%d: fca_hba_attach failed. Unable to allocate soft " 6184 "state.", DRIVER_NAME, ddiinst); 6185 return (DDI_FAILURE); 6186 } 6187 init_flag |= ATTACH_SOFT_STATE; 6188 6189 if ((hba = (emlxs_hba_t *)ddi_get_soft_state(emlxs_soft_state, 6190 ddiinst)) == NULL) { 6191 cmn_err(CE_WARN, 6192 "?%s%d: fca_hba_attach failed. Unable to get soft state.", 6193 DRIVER_NAME, ddiinst); 6194 goto failed; 6195 } 6196 bzero((char *)hba, sizeof (emlxs_hba_t)); 6197 6198 emlxs_device.hba[emlxinst] = hba; 6199 emlxs_device.log[emlxinst] = &hba->log; 6200 6201 #ifdef DUMP_SUPPORT 6202 emlxs_device.dump_txtfile[emlxinst] = &hba->dump_txtfile; 6203 emlxs_device.dump_dmpfile[emlxinst] = &hba->dump_dmpfile; 6204 emlxs_device.dump_ceefile[emlxinst] = &hba->dump_ceefile; 6205 #endif /* DUMP_SUPPORT */ 6206 6207 hba->dip = dip; 6208 hba->emlxinst = emlxinst; 6209 hba->ddiinst = ddiinst; 6210 hba->ini_mode = 0; 6211 hba->tgt_mode = 0; 6212 6213 init_flag |= ATTACH_HBA; 6214 6215 /* Enable the physical port on this HBA */ 6216 port = &PPORT; 6217 port->hba = hba; 6218 port->vpi = 0; 6219 port->flag |= EMLXS_PORT_ENABLE; 6220 6221 /* Allocate a transport structure */ 6222 hba->fca_tran = 6223 (fc_fca_tran_t *)kmem_zalloc(sizeof (fc_fca_tran_t), KM_NOSLEEP); 6224 if (hba->fca_tran == NULL) { 6225 cmn_err(CE_WARN, 6226 "?%s%d: fca_hba_attach failed. Unable to allocate fca_tran " 6227 "memory.", DRIVER_NAME, ddiinst); 6228 goto failed; 6229 } 6230 bcopy((caddr_t)&emlxs_fca_tran, (caddr_t)hba->fca_tran, 6231 sizeof (fc_fca_tran_t)); 6232 6233 /* 6234 * Copy the global ddi_dma_attr to the local hba fields 6235 */ 6236 bcopy((caddr_t)&emlxs_dma_attr, (caddr_t)&hba->dma_attr, 6237 sizeof (ddi_dma_attr_t)); 6238 bcopy((caddr_t)&emlxs_dma_attr_ro, (caddr_t)&hba->dma_attr_ro, 6239 sizeof (ddi_dma_attr_t)); 6240 bcopy((caddr_t)&emlxs_dma_attr_1sg, (caddr_t)&hba->dma_attr_1sg, 6241 sizeof (ddi_dma_attr_t)); 6242 bcopy((caddr_t)&emlxs_dma_attr_fcip_rsp, 6243 (caddr_t)&hba->dma_attr_fcip_rsp, sizeof (ddi_dma_attr_t)); 6244 6245 /* Reset the fca_tran dma_attr fields to the per-hba copies */ 6246 hba->fca_tran->fca_dma_attr = &hba->dma_attr; 6247 hba->fca_tran->fca_dma_fcp_cmd_attr = &hba->dma_attr_1sg; 6248 hba->fca_tran->fca_dma_fcp_rsp_attr = &hba->dma_attr_1sg; 6249 hba->fca_tran->fca_dma_fcp_data_attr = &hba->dma_attr_ro; 6250 hba->fca_tran->fca_dma_fcip_cmd_attr = &hba->dma_attr_1sg; 6251 hba->fca_tran->fca_dma_fcip_rsp_attr = &hba->dma_attr_fcip_rsp; 6252 hba->fca_tran->fca_dma_fcsm_cmd_attr = &hba->dma_attr_1sg; 6253 hba->fca_tran->fca_dma_fcsm_rsp_attr = &hba->dma_attr; 6254 6255 /* Set the transport structure pointer in our dip */ 6256 /* SFS may panic if we are in target only mode */ 6257 /* We will update the transport structure later */ 6258 (void) ddi_set_driver_private(dip, (caddr_t)&emlxs_fca_tran); 6259 init_flag |= ATTACH_FCA_TRAN; 6260 6261 /* Perform driver integrity check */ 6262 rval = emlxs_integrity_check(hba); 6263 if (rval) { 6264 cmn_err(CE_WARN, 6265 "?%s%d: fca_hba_attach failed. Driver integrity check " 6266 "failed. %d error(s) found.", DRIVER_NAME, ddiinst, rval); 6267 goto failed; 6268 } 6269 6270 cfg = &CFG; 6271 6272 bcopy((uint8_t *)&emlxs_cfg, (uint8_t *)cfg, sizeof (emlxs_cfg)); 6273 #ifdef MSI_SUPPORT 6274 if ((void *)&ddi_intr_get_supported_types != NULL) { 6275 hba->intr_flags |= EMLXS_MSI_ENABLED; 6276 } 6277 #endif /* MSI_SUPPORT */ 6278 6279 6280 /* Create the msg log file */ 6281 if (emlxs_msg_log_create(hba) == 0) { 6282 cmn_err(CE_WARN, 6283 "?%s%d: fca_hba_attach failed. Unable to create message " 6284 "log", DRIVER_NAME, ddiinst); 6285 goto failed; 6286 6287 } 6288 init_flag |= ATTACH_LOG; 6289 6290 /* We can begin to use EMLXS_MSGF from this point on */ 6291 6292 /* Create the event queue */ 6293 if (emlxs_event_queue_create(hba) == 0) { 6294 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg, 6295 "Unable to create event queue"); 6296 6297 goto failed; 6298 6299 } 6300 init_flag |= ATTACH_EVENTS; 6301 6302 /* 6303 * Find the I/O bus type If it is not a SBUS card, 6304 * then it is a PCI card. Default is PCI_FC (0). 6305 */ 6306 prop_str = NULL; 6307 status = ddi_prop_lookup_string(DDI_DEV_T_ANY, 6308 (dev_info_t *)dip, 0, "name", (char **)&prop_str); 6309 6310 if (status == DDI_PROP_SUCCESS) { 6311 if (strncmp(prop_str, "lpfs", 4) == 0) { 6312 hba->bus_type = SBUS_FC; 6313 } 6314 6315 (void) ddi_prop_free((void *)prop_str); 6316 } 6317 6318 /* 6319 * Copy DDS from the config method and update configuration parameters 6320 */ 6321 (void) emlxs_get_props(hba); 6322 6323 #ifdef FMA_SUPPORT 6324 hba->fm_caps = cfg[CFG_FM_CAPS].current; 6325 6326 emlxs_fm_init(hba); 6327 6328 init_flag |= ATTACH_FM; 6329 #endif /* FMA_SUPPORT */ 6330 6331 if (emlxs_map_bus(hba)) { 6332 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg, 6333 "Unable to map memory"); 6334 goto failed; 6335 6336 } 6337 init_flag |= ATTACH_MAP_BUS; 6338 6339 /* Attempt to identify the adapter */ 6340 rval = emlxs_init_adapter_info(hba); 6341 6342 if (rval == 0) { 6343 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg, 6344 "Unable to get adapter info. Id:%d Device id:0x%x " 6345 "Model:%s", hba->model_info.id, 6346 hba->model_info.device_id, hba->model_info.model); 6347 goto failed; 6348 } 6349 6350 /* Check if adapter is not supported */ 6351 if (hba->model_info.flags & EMLXS_NOT_SUPPORTED) { 6352 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg, 6353 "Unsupported adapter found. Id:%d Device id:0x%x " 6354 "SSDID:0x%x Model:%s", hba->model_info.id, 6355 hba->model_info.device_id, 6356 hba->model_info.ssdid, hba->model_info.model); 6357 goto failed; 6358 } 6359 if (hba->model_info.sli_mask & EMLXS_SLI4_MASK) { 6360 hba->sli.sli4.mem_sgl_size = MEM_SGL_SIZE; 6361 #ifdef EMLXS_I386 6362 /* 6363 * TigerShark has 64K limit for SG element size 6364 * Do this for x86 alone. For SPARC, the driver 6365 * breaks up the single SGE later on. 6366 */ 6367 hba->dma_attr_ro.dma_attr_count_max = 0xffff; 6368 6369 i = cfg[CFG_MAX_XFER_SIZE].current; 6370 /* Update SGL size based on max_xfer_size */ 6371 if (i > 688128) { 6372 /* 688128 = (((2048 / 12) - 2) * 4096) */ 6373 hba->sli.sli4.mem_sgl_size = 4096; 6374 } else if (i > 339968) { 6375 /* 339968 = (((1024 / 12) - 2) * 4096) */ 6376 hba->sli.sli4.mem_sgl_size = 2048; 6377 } else { 6378 hba->sli.sli4.mem_sgl_size = 1024; 6379 } 6380 i = SGL_TO_SGLLEN(hba->sli.sli4.mem_sgl_size); 6381 #endif /* EMLXS_I386 */ 6382 } else { 6383 hba->sli.sli3.mem_bpl_size = MEM_BPL_SIZE; 6384 #ifdef EMLXS_I386 6385 i = cfg[CFG_MAX_XFER_SIZE].current; 6386 /* Update BPL size based on max_xfer_size */ 6387 if (i > 688128) { 6388 /* 688128 = (((2048 / 12) - 2) * 4096) */ 6389 hba->sli.sli3.mem_bpl_size = 4096; 6390 } else if (i > 339968) { 6391 /* 339968 = (((1024 / 12) - 2) * 4096) */ 6392 hba->sli.sli3.mem_bpl_size = 2048; 6393 } else { 6394 hba->sli.sli3.mem_bpl_size = 1024; 6395 } 6396 i = BPL_TO_SGLLEN(hba->sli.sli3.mem_bpl_size); 6397 #endif /* EMLXS_I386 */ 6398 } 6399 6400 #ifdef EMLXS_I386 6401 /* Update dma_attr_sgllen based on BPL size */ 6402 hba->dma_attr.dma_attr_sgllen = i; 6403 hba->dma_attr_ro.dma_attr_sgllen = i; 6404 hba->dma_attr_fcip_rsp.dma_attr_sgllen = i; 6405 #endif /* EMLXS_I386 */ 6406 6407 if (EMLXS_SLI_MAP_HDW(hba)) { 6408 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg, 6409 "Unable to map memory"); 6410 goto failed; 6411 6412 } 6413 init_flag |= ATTACH_MAP_SLI; 6414 6415 /* Initialize the interrupts. But don't add them yet */ 6416 status = EMLXS_INTR_INIT(hba, 0); 6417 if (status != DDI_SUCCESS) { 6418 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg, 6419 "Unable to initalize interrupt(s)."); 6420 goto failed; 6421 6422 } 6423 init_flag |= ATTACH_INTR_INIT; 6424 6425 /* Initialize LOCKs */ 6426 emlxs_lock_init(hba); 6427 init_flag |= ATTACH_LOCK; 6428 6429 /* Initialize the power management */ 6430 mutex_enter(&EMLXS_PM_LOCK); 6431 hba->pm_state = EMLXS_PM_IN_ATTACH; 6432 hba->pm_level = EMLXS_PM_ADAPTER_DOWN; 6433 hba->pm_busy = 0; 6434 #ifdef IDLE_TIMER 6435 hba->pm_active = 1; 6436 hba->pm_idle_timer = 0; 6437 #endif /* IDLE_TIMER */ 6438 mutex_exit(&EMLXS_PM_LOCK); 6439 6440 /* Set the pm component name */ 6441 (void) sprintf(local_pm_components, "NAME=%s%d", DRIVER_NAME, 6442 ddiinst); 6443 emlxs_pm_components[0] = local_pm_components; 6444 6445 /* Check if power management support is enabled */ 6446 if (cfg[CFG_PM_SUPPORT].current) { 6447 if (ddi_prop_update_string_array(DDI_DEV_T_NONE, dip, 6448 "pm-components", emlxs_pm_components, 6449 sizeof (emlxs_pm_components) / 6450 sizeof (emlxs_pm_components[0])) != 6451 DDI_PROP_SUCCESS) { 6452 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg, 6453 "Unable to create pm components."); 6454 goto failed; 6455 } 6456 } 6457 6458 /* Needed for suspend and resume support */ 6459 (void) ddi_prop_update_string(DDI_DEV_T_NONE, dip, "pm-hardware-state", 6460 "needs-suspend-resume"); 6461 init_flag |= ATTACH_PROP; 6462 6463 emlxs_thread_spawn_create(hba); 6464 init_flag |= ATTACH_SPAWN; 6465 6466 emlxs_thread_create(hba, &hba->iodone_thread); 6467 6468 init_flag |= ATTACH_THREAD; 6469 6470 /* Setup initiator / target ports */ 6471 emlxs_set_mode(hba); 6472 6473 /* If driver did not attach to either stack, */ 6474 /* then driver attach failed */ 6475 if (!hba->tgt_mode && !hba->ini_mode) { 6476 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg, 6477 "Driver interfaces not enabled."); 6478 goto failed; 6479 } 6480 6481 /* 6482 * Initialize HBA 6483 */ 6484 6485 /* Set initial state */ 6486 mutex_enter(&EMLXS_PORT_LOCK); 6487 emlxs_diag_state = DDI_OFFDI; 6488 hba->flag |= FC_OFFLINE_MODE; 6489 hba->flag &= ~(FC_ONLINE_MODE | FC_ONLINING_MODE | FC_OFFLINING_MODE); 6490 mutex_exit(&EMLXS_PORT_LOCK); 6491 6492 if (status = emlxs_online(hba)) { 6493 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg, 6494 "Unable to initialize adapter."); 6495 goto failed; 6496 } 6497 init_flag |= ATTACH_ONLINE; 6498 6499 /* This is to ensure that the model property is properly set */ 6500 (void) ddi_prop_update_string(DDI_DEV_T_NONE, dip, "model", 6501 hba->model_info.model); 6502 6503 /* Create the device node. */ 6504 if (ddi_create_minor_node(dip, "devctl", S_IFCHR, ddiinst, NULL, 0) == 6505 DDI_FAILURE) { 6506 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg, 6507 "Unable to create device node."); 6508 goto failed; 6509 } 6510 init_flag |= ATTACH_NODE; 6511 6512 /* Attach initiator now */ 6513 /* This must come after emlxs_online() */ 6514 emlxs_fca_attach(hba); 6515 init_flag |= ATTACH_FCA; 6516 6517 /* Initialize kstat information */ 6518 hba->kstat = kstat_create(DRIVER_NAME, 6519 ddiinst, "statistics", "controller", 6520 KSTAT_TYPE_RAW, sizeof (emlxs_stats_t), 6521 KSTAT_FLAG_VIRTUAL); 6522 6523 if (hba->kstat == NULL) { 6524 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg, 6525 "kstat_create failed."); 6526 } else { 6527 hba->kstat->ks_data = (void *)&hba->stats; 6528 kstat_install(hba->kstat); 6529 init_flag |= ATTACH_KSTAT; 6530 } 6531 6532 #if (EMLXS_MODREV >= EMLXS_MODREV3) && (EMLXS_MODREV <= EMLXS_MODREV4) 6533 /* Setup virtual port properties */ 6534 emlxs_read_vport_prop(hba); 6535 #endif /* EMLXS_MODREV3 || EMLXS_MODREV4 */ 6536 6537 6538 #ifdef DHCHAP_SUPPORT 6539 emlxs_dhc_attach(hba); 6540 init_flag |= ATTACH_DHCHAP; 6541 #endif /* DHCHAP_SUPPORT */ 6542 6543 /* Display the driver banner now */ 6544 emlxs_drv_banner(hba); 6545 6546 /* Raise the power level */ 6547 6548 /* 6549 * This will not execute emlxs_hba_resume because 6550 * EMLXS_PM_IN_ATTACH is set 6551 */ 6552 if (emlxs_pm_raise_power(dip) != DDI_SUCCESS) { 6553 /* Set power up anyway. This should not happen! */ 6554 mutex_enter(&EMLXS_PM_LOCK); 6555 hba->pm_level = EMLXS_PM_ADAPTER_UP; 6556 hba->pm_state &= ~EMLXS_PM_IN_ATTACH; 6557 mutex_exit(&EMLXS_PM_LOCK); 6558 } else { 6559 mutex_enter(&EMLXS_PM_LOCK); 6560 hba->pm_state &= ~EMLXS_PM_IN_ATTACH; 6561 mutex_exit(&EMLXS_PM_LOCK); 6562 } 6563 6564 #ifdef SFCT_SUPPORT 6565 /* Do this last */ 6566 emlxs_fct_attach(hba); 6567 init_flag |= ATTACH_FCT; 6568 #endif /* SFCT_SUPPORT */ 6569 6570 return (DDI_SUCCESS); 6571 6572 failed: 6573 6574 emlxs_driver_remove(dip, init_flag, 1); 6575 6576 return (DDI_FAILURE); 6577 6578 } /* emlxs_hba_attach() */ 6579 6580 6581 static int 6582 emlxs_hba_detach(dev_info_t *dip) 6583 { 6584 emlxs_hba_t *hba; 6585 emlxs_port_t *port; 6586 int ddiinst; 6587 int count; 6588 uint32_t init_flag = (uint32_t)-1; 6589 6590 ddiinst = ddi_get_instance(dip); 6591 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst); 6592 port = &PPORT; 6593 6594 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_debug_msg, NULL); 6595 6596 mutex_enter(&EMLXS_PM_LOCK); 6597 hba->pm_state |= EMLXS_PM_IN_DETACH; 6598 mutex_exit(&EMLXS_PM_LOCK); 6599 6600 /* Lower the power level */ 6601 /* 6602 * This will not suspend the driver since the 6603 * EMLXS_PM_IN_DETACH has been set 6604 */ 6605 if (emlxs_pm_lower_power(dip) != DDI_SUCCESS) { 6606 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg, 6607 "Unable to lower power."); 6608 6609 mutex_enter(&EMLXS_PM_LOCK); 6610 hba->pm_state &= ~EMLXS_PM_IN_DETACH; 6611 mutex_exit(&EMLXS_PM_LOCK); 6612 6613 return (DDI_FAILURE); 6614 } 6615 6616 /* Take the adapter offline first, if not already */ 6617 if (emlxs_offline(hba) != 0) { 6618 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg, 6619 "Unable to take adapter offline."); 6620 6621 mutex_enter(&EMLXS_PM_LOCK); 6622 hba->pm_state &= ~EMLXS_PM_IN_DETACH; 6623 mutex_exit(&EMLXS_PM_LOCK); 6624 6625 (void) emlxs_pm_raise_power(dip); 6626 6627 return (DDI_FAILURE); 6628 } 6629 /* Check ub buffer pools */ 6630 if (port->ub_pool) { 6631 mutex_enter(&EMLXS_UB_LOCK); 6632 6633 /* Wait up to 10 seconds for all ub pools to be freed */ 6634 count = 10 * 2; 6635 while (port->ub_pool && count) { 6636 mutex_exit(&EMLXS_UB_LOCK); 6637 delay(drv_usectohz(500000)); /* half second wait */ 6638 count--; 6639 mutex_enter(&EMLXS_UB_LOCK); 6640 } 6641 6642 if (port->ub_pool) { 6643 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 6644 "fca_unbind_port: Unsolicited buffers still " 6645 "active. port=%p. Destroying...", port); 6646 6647 /* Destroy all pools */ 6648 while (port->ub_pool) { 6649 emlxs_ub_destroy(port, port->ub_pool); 6650 } 6651 } 6652 6653 mutex_exit(&EMLXS_UB_LOCK); 6654 } 6655 init_flag &= ~ATTACH_ONLINE; 6656 6657 /* Remove the driver instance */ 6658 emlxs_driver_remove(dip, init_flag, 0); 6659 6660 return (DDI_SUCCESS); 6661 6662 } /* emlxs_hba_detach() */ 6663 6664 6665 extern int 6666 emlxs_map_bus(emlxs_hba_t *hba) 6667 { 6668 emlxs_port_t *port = &PPORT; 6669 dev_info_t *dip; 6670 ddi_device_acc_attr_t dev_attr; 6671 int status; 6672 6673 dip = (dev_info_t *)hba->dip; 6674 dev_attr = emlxs_dev_acc_attr; 6675 6676 if (hba->bus_type == SBUS_FC) { 6677 if (hba->pci_acc_handle == 0) { 6678 status = ddi_regs_map_setup(dip, 6679 SBUS_DFLY_PCI_CFG_RINDEX, 6680 (caddr_t *)&hba->pci_addr, 6681 0, 0, &emlxs_dev_acc_attr, &hba->pci_acc_handle); 6682 if (status != DDI_SUCCESS) { 6683 EMLXS_MSGF(EMLXS_CONTEXT, 6684 &emlxs_attach_failed_msg, 6685 "(SBUS) ddi_regs_map_setup PCI failed. " 6686 "status=%x", status); 6687 goto failed; 6688 } 6689 } 6690 6691 if (hba->sbus_pci_handle == 0) { 6692 status = ddi_regs_map_setup(dip, 6693 SBUS_TITAN_PCI_CFG_RINDEX, 6694 (caddr_t *)&hba->sbus_pci_addr, 6695 0, 0, &dev_attr, &hba->sbus_pci_handle); 6696 if (status != DDI_SUCCESS) { 6697 EMLXS_MSGF(EMLXS_CONTEXT, 6698 &emlxs_attach_failed_msg, 6699 "(SBUS) ddi_regs_map_setup TITAN PCI " 6700 "failed. status=%x", status); 6701 goto failed; 6702 } 6703 } 6704 6705 } else { /* ****** PCI ****** */ 6706 6707 if (hba->pci_acc_handle == 0) { 6708 status = ddi_regs_map_setup(dip, 6709 PCI_CFG_RINDEX, 6710 (caddr_t *)&hba->pci_addr, 6711 0, 0, &emlxs_dev_acc_attr, &hba->pci_acc_handle); 6712 if (status != DDI_SUCCESS) { 6713 EMLXS_MSGF(EMLXS_CONTEXT, 6714 &emlxs_attach_failed_msg, 6715 "(PCI) ddi_regs_map_setup PCI failed. " 6716 "status=%x", status); 6717 goto failed; 6718 } 6719 } 6720 #ifdef EMLXS_I386 6721 /* Setting up PCI configure space */ 6722 (void) ddi_put16(hba->pci_acc_handle, 6723 (uint16_t *)(hba->pci_addr + PCI_COMMAND_REGISTER), 6724 CMD_CFG_VALUE | CMD_IO_ENBL); 6725 6726 #ifdef FMA_SUPPORT 6727 if (emlxs_fm_check_acc_handle(hba, hba->pci_acc_handle) 6728 != DDI_FM_OK) { 6729 EMLXS_MSGF(EMLXS_CONTEXT, 6730 &emlxs_invalid_access_handle_msg, NULL); 6731 goto failed; 6732 } 6733 #endif /* FMA_SUPPORT */ 6734 6735 #endif /* EMLXS_I386 */ 6736 6737 } 6738 return (0); 6739 6740 failed: 6741 6742 emlxs_unmap_bus(hba); 6743 return (ENOMEM); 6744 6745 } /* emlxs_map_bus() */ 6746 6747 6748 extern void 6749 emlxs_unmap_bus(emlxs_hba_t *hba) 6750 { 6751 if (hba->pci_acc_handle) { 6752 (void) ddi_regs_map_free(&hba->pci_acc_handle); 6753 hba->pci_acc_handle = 0; 6754 } 6755 6756 if (hba->sbus_pci_handle) { 6757 (void) ddi_regs_map_free(&hba->sbus_pci_handle); 6758 hba->sbus_pci_handle = 0; 6759 } 6760 6761 return; 6762 6763 } /* emlxs_unmap_bus() */ 6764 6765 6766 static int 6767 emlxs_get_props(emlxs_hba_t *hba) 6768 { 6769 emlxs_config_t *cfg; 6770 uint32_t i; 6771 char string[256]; 6772 uint32_t new_value; 6773 6774 /* Initialize each parameter */ 6775 for (i = 0; i < NUM_CFG_PARAM; i++) { 6776 cfg = &hba->config[i]; 6777 6778 /* Ensure strings are terminated */ 6779 cfg->string[(EMLXS_CFG_STR_SIZE-1)] = 0; 6780 cfg->help[(EMLXS_CFG_HELP_SIZE-1)] = 0; 6781 6782 /* Set the current value to the default value */ 6783 new_value = cfg->def; 6784 6785 /* First check for the global setting */ 6786 new_value = (uint32_t)ddi_prop_get_int(DDI_DEV_T_ANY, 6787 (void *)hba->dip, DDI_PROP_DONTPASS, 6788 cfg->string, new_value); 6789 6790 /* Now check for the per adapter ddiinst setting */ 6791 (void) sprintf(string, "%s%d-%s", DRIVER_NAME, hba->ddiinst, 6792 cfg->string); 6793 6794 new_value = (uint32_t)ddi_prop_get_int(DDI_DEV_T_ANY, 6795 (void *)hba->dip, DDI_PROP_DONTPASS, string, new_value); 6796 6797 /* Now check the parameter */ 6798 cfg->current = emlxs_check_parm(hba, i, new_value); 6799 } 6800 6801 return (0); 6802 6803 } /* emlxs_get_props() */ 6804 6805 6806 extern uint32_t 6807 emlxs_check_parm(emlxs_hba_t *hba, uint32_t index, uint32_t new_value) 6808 { 6809 emlxs_port_t *port = &PPORT; 6810 uint32_t i; 6811 emlxs_config_t *cfg; 6812 emlxs_vpd_t *vpd = &VPD; 6813 6814 if (index > NUM_CFG_PARAM) { 6815 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 6816 "emlxs_check_parm failed. Invalid index = %d", index); 6817 6818 return (new_value); 6819 } 6820 6821 cfg = &hba->config[index]; 6822 6823 if (new_value > cfg->hi) { 6824 new_value = cfg->def; 6825 } else if (new_value < cfg->low) { 6826 new_value = cfg->def; 6827 } 6828 6829 /* Perform additional checks */ 6830 switch (index) { 6831 case CFG_NPIV_ENABLE: 6832 if (hba->tgt_mode) { 6833 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_init_msg, 6834 "enable-npiv: Not supported in target mode. " 6835 "Disabling."); 6836 6837 new_value = 0; 6838 } 6839 break; 6840 6841 #ifdef DHCHAP_SUPPORT 6842 case CFG_AUTH_ENABLE: 6843 if (hba->tgt_mode) { 6844 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_init_msg, 6845 "enable-auth: Not supported in target mode. " 6846 "Disabling."); 6847 6848 new_value = 0; 6849 } 6850 break; 6851 #endif /* DHCHAP_SUPPORT */ 6852 6853 case CFG_NUM_NODES: 6854 switch (new_value) { 6855 case 1: 6856 case 2: 6857 /* Must have at least 3 if not 0 */ 6858 return (3); 6859 6860 default: 6861 break; 6862 } 6863 break; 6864 6865 case CFG_LINK_SPEED: 6866 if (vpd->link_speed) { 6867 switch (new_value) { 6868 case 0: 6869 break; 6870 6871 case 1: 6872 if (!(vpd->link_speed & LMT_1GB_CAPABLE)) { 6873 new_value = 0; 6874 6875 EMLXS_MSGF(EMLXS_CONTEXT, 6876 &emlxs_init_msg, 6877 "link-speed: 1Gb not supported " 6878 "by adapter. Switching to auto " 6879 "detect."); 6880 } 6881 break; 6882 6883 case 2: 6884 if (!(vpd->link_speed & LMT_2GB_CAPABLE)) { 6885 new_value = 0; 6886 6887 EMLXS_MSGF(EMLXS_CONTEXT, 6888 &emlxs_init_msg, 6889 "link-speed: 2Gb not supported " 6890 "by adapter. Switching to auto " 6891 "detect."); 6892 } 6893 break; 6894 case 4: 6895 if (!(vpd->link_speed & LMT_4GB_CAPABLE)) { 6896 new_value = 0; 6897 6898 EMLXS_MSGF(EMLXS_CONTEXT, 6899 &emlxs_init_msg, 6900 "link-speed: 4Gb not supported " 6901 "by adapter. Switching to auto " 6902 "detect."); 6903 } 6904 break; 6905 6906 case 8: 6907 if (!(vpd->link_speed & LMT_8GB_CAPABLE)) { 6908 new_value = 0; 6909 6910 EMLXS_MSGF(EMLXS_CONTEXT, 6911 &emlxs_init_msg, 6912 "link-speed: 8Gb not supported " 6913 "by adapter. Switching to auto " 6914 "detect."); 6915 } 6916 break; 6917 6918 case 10: 6919 if (!(vpd->link_speed & LMT_10GB_CAPABLE)) { 6920 new_value = 0; 6921 6922 EMLXS_MSGF(EMLXS_CONTEXT, 6923 &emlxs_init_msg, 6924 "link-speed: 10Gb not supported " 6925 "by adapter. Switching to auto " 6926 "detect."); 6927 } 6928 break; 6929 6930 default: 6931 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_init_msg, 6932 "link-speed: Invalid value=%d provided. " 6933 "Switching to auto detect.", 6934 new_value); 6935 6936 new_value = 0; 6937 } 6938 } else { /* Perform basic validity check */ 6939 6940 /* Perform additional check on link speed */ 6941 switch (new_value) { 6942 case 0: 6943 case 1: 6944 case 2: 6945 case 4: 6946 case 8: 6947 case 10: 6948 /* link-speed is a valid choice */ 6949 break; 6950 6951 default: 6952 new_value = cfg->def; 6953 } 6954 } 6955 break; 6956 6957 case CFG_TOPOLOGY: 6958 /* Perform additional check on topology */ 6959 switch (new_value) { 6960 case 0: 6961 case 2: 6962 case 4: 6963 case 6: 6964 /* topology is a valid choice */ 6965 break; 6966 6967 default: 6968 return (cfg->def); 6969 } 6970 break; 6971 6972 #ifdef DHCHAP_SUPPORT 6973 case CFG_AUTH_TYPE: 6974 { 6975 uint32_t shift; 6976 uint32_t mask; 6977 6978 /* Perform additional check on auth type */ 6979 shift = 12; 6980 mask = 0xF000; 6981 for (i = 0; i < 4; i++) { 6982 if (((new_value & mask) >> shift) > DFC_AUTH_TYPE_MAX) { 6983 return (cfg->def); 6984 } 6985 6986 shift -= 4; 6987 mask >>= 4; 6988 } 6989 break; 6990 } 6991 6992 case CFG_AUTH_HASH: 6993 { 6994 uint32_t shift; 6995 uint32_t mask; 6996 6997 /* Perform additional check on auth hash */ 6998 shift = 12; 6999 mask = 0xF000; 7000 for (i = 0; i < 4; i++) { 7001 if (((new_value & mask) >> shift) > DFC_AUTH_HASH_MAX) { 7002 return (cfg->def); 7003 } 7004 7005 shift -= 4; 7006 mask >>= 4; 7007 } 7008 break; 7009 } 7010 7011 case CFG_AUTH_GROUP: 7012 { 7013 uint32_t shift; 7014 uint32_t mask; 7015 7016 /* Perform additional check on auth group */ 7017 shift = 28; 7018 mask = 0xF0000000; 7019 for (i = 0; i < 8; i++) { 7020 if (((new_value & mask) >> shift) > 7021 DFC_AUTH_GROUP_MAX) { 7022 return (cfg->def); 7023 } 7024 7025 shift -= 4; 7026 mask >>= 4; 7027 } 7028 break; 7029 } 7030 7031 case CFG_AUTH_INTERVAL: 7032 if (new_value < 10) { 7033 return (10); 7034 } 7035 break; 7036 7037 7038 #endif /* DHCHAP_SUPPORT */ 7039 7040 } /* switch */ 7041 7042 return (new_value); 7043 7044 } /* emlxs_check_parm() */ 7045 7046 7047 extern uint32_t 7048 emlxs_set_parm(emlxs_hba_t *hba, uint32_t index, uint32_t new_value) 7049 { 7050 emlxs_port_t *port = &PPORT; 7051 emlxs_port_t *vport; 7052 uint32_t vpi; 7053 emlxs_config_t *cfg; 7054 uint32_t old_value; 7055 7056 if (index > NUM_CFG_PARAM) { 7057 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 7058 "emlxs_set_parm failed. Invalid index = %d", index); 7059 7060 return ((uint32_t)FC_FAILURE); 7061 } 7062 7063 cfg = &hba->config[index]; 7064 7065 if (!(cfg->flags & PARM_DYNAMIC)) { 7066 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 7067 "emlxs_set_parm failed. %s is not dynamic.", cfg->string); 7068 7069 return ((uint32_t)FC_FAILURE); 7070 } 7071 7072 /* Check new value */ 7073 old_value = new_value; 7074 new_value = emlxs_check_parm(hba, index, new_value); 7075 7076 if (old_value != new_value) { 7077 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 7078 "emlxs_set_parm: %s invalid. 0x%x --> 0x%x", 7079 cfg->string, old_value, new_value); 7080 } 7081 7082 /* Return now if no actual change */ 7083 if (new_value == cfg->current) { 7084 return (FC_SUCCESS); 7085 } 7086 7087 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, 7088 "emlxs_set_parm: %s changing. 0x%x --> 0x%x", 7089 cfg->string, cfg->current, new_value); 7090 7091 old_value = cfg->current; 7092 cfg->current = new_value; 7093 7094 /* React to change if needed */ 7095 switch (index) { 7096 7097 case CFG_PCI_MAX_READ: 7098 /* Update MXR */ 7099 emlxs_pcix_mxr_update(hba, 1); 7100 break; 7101 7102 case CFG_SLI_MODE: 7103 /* Check SLI mode */ 7104 if ((hba->sli_mode == 3) && (new_value == 2)) { 7105 /* All vports must be disabled first */ 7106 for (vpi = 1; vpi < MAX_VPORTS; vpi++) { 7107 vport = &VPORT(vpi); 7108 7109 if (vport->flag & EMLXS_PORT_ENABLE) { 7110 /* Reset current value */ 7111 cfg->current = old_value; 7112 7113 EMLXS_MSGF(EMLXS_CONTEXT, 7114 &emlxs_sfs_debug_msg, 7115 "emlxs_set_parm failed. %s: vpi=%d " 7116 "still enabled. Value restored to " 7117 "0x%x.", cfg->string, vpi, 7118 old_value); 7119 7120 return (2); 7121 } 7122 } 7123 } 7124 break; 7125 7126 case CFG_NPIV_ENABLE: 7127 /* Check if NPIV is being disabled */ 7128 if ((old_value == 1) && (new_value == 0)) { 7129 /* All vports must be disabled first */ 7130 for (vpi = 1; vpi < MAX_VPORTS; vpi++) { 7131 vport = &VPORT(vpi); 7132 7133 if (vport->flag & EMLXS_PORT_ENABLE) { 7134 /* Reset current value */ 7135 cfg->current = old_value; 7136 7137 EMLXS_MSGF(EMLXS_CONTEXT, 7138 &emlxs_sfs_debug_msg, 7139 "emlxs_set_parm failed. %s: vpi=%d " 7140 "still enabled. Value restored to " 7141 "0x%x.", cfg->string, vpi, 7142 old_value); 7143 7144 return (2); 7145 } 7146 } 7147 } 7148 7149 /* Trigger adapter reset */ 7150 /* (void) emlxs_reset(port, FC_FCA_RESET); */ 7151 7152 break; 7153 7154 7155 case CFG_VPORT_RESTRICTED: 7156 for (vpi = 0; vpi < MAX_VPORTS; vpi++) { 7157 vport = &VPORT(vpi); 7158 7159 if (!(vport->flag & EMLXS_PORT_CONFIG)) { 7160 continue; 7161 } 7162 7163 if (vport->options & EMLXS_OPT_RESTRICT_MASK) { 7164 continue; 7165 } 7166 7167 if (new_value) { 7168 vport->flag |= EMLXS_PORT_RESTRICTED; 7169 } else { 7170 vport->flag &= ~EMLXS_PORT_RESTRICTED; 7171 } 7172 } 7173 7174 break; 7175 7176 #ifdef DHCHAP_SUPPORT 7177 case CFG_AUTH_ENABLE: 7178 (void) emlxs_reset(port, FC_FCA_LINK_RESET); 7179 break; 7180 7181 case CFG_AUTH_TMO: 7182 hba->auth_cfg.authentication_timeout = cfg->current; 7183 break; 7184 7185 case CFG_AUTH_MODE: 7186 hba->auth_cfg.authentication_mode = cfg->current; 7187 break; 7188 7189 case CFG_AUTH_BIDIR: 7190 hba->auth_cfg.bidirectional = cfg->current; 7191 break; 7192 7193 case CFG_AUTH_TYPE: 7194 hba->auth_cfg.authentication_type_priority[0] = 7195 (cfg->current & 0xF000) >> 12; 7196 hba->auth_cfg.authentication_type_priority[1] = 7197 (cfg->current & 0x0F00) >> 8; 7198 hba->auth_cfg.authentication_type_priority[2] = 7199 (cfg->current & 0x00F0) >> 4; 7200 hba->auth_cfg.authentication_type_priority[3] = 7201 (cfg->current & 0x000F); 7202 break; 7203 7204 case CFG_AUTH_HASH: 7205 hba->auth_cfg.hash_priority[0] = 7206 (cfg->current & 0xF000) >> 12; 7207 hba->auth_cfg.hash_priority[1] = (cfg->current & 0x0F00)>>8; 7208 hba->auth_cfg.hash_priority[2] = (cfg->current & 0x00F0)>>4; 7209 hba->auth_cfg.hash_priority[3] = (cfg->current & 0x000F); 7210 break; 7211 7212 case CFG_AUTH_GROUP: 7213 hba->auth_cfg.dh_group_priority[0] = 7214 (cfg->current & 0xF0000000) >> 28; 7215 hba->auth_cfg.dh_group_priority[1] = 7216 (cfg->current & 0x0F000000) >> 24; 7217 hba->auth_cfg.dh_group_priority[2] = 7218 (cfg->current & 0x00F00000) >> 20; 7219 hba->auth_cfg.dh_group_priority[3] = 7220 (cfg->current & 0x000F0000) >> 16; 7221 hba->auth_cfg.dh_group_priority[4] = 7222 (cfg->current & 0x0000F000) >> 12; 7223 hba->auth_cfg.dh_group_priority[5] = 7224 (cfg->current & 0x00000F00) >> 8; 7225 hba->auth_cfg.dh_group_priority[6] = 7226 (cfg->current & 0x000000F0) >> 4; 7227 hba->auth_cfg.dh_group_priority[7] = 7228 (cfg->current & 0x0000000F); 7229 break; 7230 7231 case CFG_AUTH_INTERVAL: 7232 hba->auth_cfg.reauthenticate_time_interval = cfg->current; 7233 break; 7234 #endif /* DHCHAP_SUPPORT */ 7235 7236 } 7237 7238 return (FC_SUCCESS); 7239 7240 } /* emlxs_set_parm() */ 7241 7242 7243 /* 7244 * emlxs_mem_alloc OS specific routine for memory allocation / mapping 7245 * 7246 * The buf_info->flags field describes the memory operation requested. 7247 * 7248 * FC_MBUF_PHYSONLY set requests a supplied virtual address be mapped for DMA 7249 * Virtual address is supplied in buf_info->virt 7250 * DMA mapping flag is in buf_info->align 7251 * (DMA_READ_ONLY, DMA_WRITE_ONLY, DMA_READ_WRITE) 7252 * The mapped physical address is returned buf_info->phys 7253 * 7254 * FC_MBUF_PHYSONLY cleared requests memory be allocated for driver use and 7255 * if FC_MBUF_DMA is set the memory is also mapped for DMA 7256 * The byte alignment of the memory request is supplied in buf_info->align 7257 * The byte size of the memory request is supplied in buf_info->size 7258 * The virtual address is returned buf_info->virt 7259 * The mapped physical address is returned buf_info->phys (for FC_MBUF_DMA) 7260 */ 7261 extern uint8_t * 7262 emlxs_mem_alloc(emlxs_hba_t *hba, MBUF_INFO *buf_info) 7263 { 7264 emlxs_port_t *port = &PPORT; 7265 ddi_dma_attr_t dma_attr; 7266 ddi_device_acc_attr_t dev_attr; 7267 uint_t cookie_count; 7268 size_t dma_reallen; 7269 ddi_dma_cookie_t dma_cookie; 7270 uint_t dma_flag; 7271 int status; 7272 7273 dma_attr = hba->dma_attr_1sg; 7274 dev_attr = emlxs_data_acc_attr; 7275 7276 if (buf_info->flags & FC_MBUF_SNGLSG) { 7277 dma_attr.dma_attr_sgllen = 1; 7278 } 7279 7280 if (buf_info->flags & FC_MBUF_DMA32) { 7281 dma_attr.dma_attr_addr_hi = (uint64_t)0xffffffff; 7282 } 7283 7284 if (buf_info->flags & FC_MBUF_PHYSONLY) { 7285 7286 if (buf_info->virt == 0) { 7287 goto done; 7288 } 7289 7290 /* 7291 * Allocate the DMA handle for this DMA object 7292 */ 7293 status = ddi_dma_alloc_handle((void *)hba->dip, 7294 &dma_attr, DDI_DMA_DONTWAIT, 7295 NULL, (ddi_dma_handle_t *)&buf_info->dma_handle); 7296 if (status != DDI_SUCCESS) { 7297 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg, 7298 "ddi_dma_alloc_handle failed: size=%x align=%x " 7299 "flags=%x", buf_info->size, buf_info->align, 7300 buf_info->flags); 7301 7302 buf_info->phys = 0; 7303 buf_info->dma_handle = 0; 7304 goto done; 7305 } 7306 7307 switch (buf_info->align) { 7308 case DMA_READ_WRITE: 7309 dma_flag = (DDI_DMA_RDWR | DDI_DMA_CONSISTENT); 7310 break; 7311 case DMA_READ_ONLY: 7312 dma_flag = (DDI_DMA_READ | DDI_DMA_CONSISTENT); 7313 break; 7314 case DMA_WRITE_ONLY: 7315 dma_flag = (DDI_DMA_WRITE | DDI_DMA_CONSISTENT); 7316 break; 7317 } 7318 7319 /* Map this page of memory */ 7320 status = ddi_dma_addr_bind_handle( 7321 (ddi_dma_handle_t)buf_info->dma_handle, NULL, 7322 (caddr_t)buf_info->virt, (size_t)buf_info->size, 7323 dma_flag, DDI_DMA_DONTWAIT, NULL, &dma_cookie, 7324 &cookie_count); 7325 7326 if (status != DDI_DMA_MAPPED || (cookie_count > 1)) { 7327 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg, 7328 "ddi_dma_addr_bind_handle failed: status=%x " 7329 "count=%x flags=%x", status, cookie_count, 7330 buf_info->flags); 7331 7332 (void) ddi_dma_free_handle( 7333 (ddi_dma_handle_t *)&buf_info->dma_handle); 7334 buf_info->phys = 0; 7335 buf_info->dma_handle = 0; 7336 goto done; 7337 } 7338 7339 if (hba->bus_type == SBUS_FC) { 7340 7341 int32_t burstsizes_limit = 0xff; 7342 int32_t ret_burst; 7343 7344 ret_burst = ddi_dma_burstsizes( 7345 buf_info->dma_handle) & burstsizes_limit; 7346 if (ddi_dma_set_sbus64(buf_info->dma_handle, 7347 ret_burst) == DDI_FAILURE) { 7348 EMLXS_MSGF(EMLXS_CONTEXT, 7349 &emlxs_mem_alloc_failed_msg, 7350 "ddi_dma_set_sbus64 failed."); 7351 } 7352 } 7353 7354 /* Save Physical address */ 7355 buf_info->phys = dma_cookie.dmac_laddress; 7356 7357 /* 7358 * Just to be sure, let's add this 7359 */ 7360 EMLXS_MPDATA_SYNC((ddi_dma_handle_t)buf_info->dma_handle, 7361 (off_t)0, (size_t)buf_info->size, DDI_DMA_SYNC_FORDEV); 7362 7363 } else if (buf_info->flags & (FC_MBUF_DMA|FC_MBUF_DMA32)) { 7364 7365 dma_attr.dma_attr_align = buf_info->align; 7366 7367 /* 7368 * Allocate the DMA handle for this DMA object 7369 */ 7370 status = ddi_dma_alloc_handle((void *)hba->dip, &dma_attr, 7371 DDI_DMA_DONTWAIT, NULL, 7372 (ddi_dma_handle_t *)&buf_info->dma_handle); 7373 if (status != DDI_SUCCESS) { 7374 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg, 7375 "ddi_dma_alloc_handle failed: size=%x align=%x " 7376 "flags=%x", buf_info->size, buf_info->align, 7377 buf_info->flags); 7378 7379 buf_info->virt = 0; 7380 buf_info->phys = 0; 7381 buf_info->data_handle = 0; 7382 buf_info->dma_handle = 0; 7383 goto done; 7384 } 7385 7386 status = ddi_dma_mem_alloc( 7387 (ddi_dma_handle_t)buf_info->dma_handle, 7388 (size_t)buf_info->size, &dev_attr, DDI_DMA_CONSISTENT, 7389 DDI_DMA_DONTWAIT, NULL, (caddr_t *)&buf_info->virt, 7390 &dma_reallen, (ddi_acc_handle_t *)&buf_info->data_handle); 7391 7392 if ((status != DDI_SUCCESS) || (buf_info->size > dma_reallen)) { 7393 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg, 7394 "ddi_dma_mem_alloc failed: size=%x align=%x " 7395 "flags=%x", buf_info->size, buf_info->align, 7396 buf_info->flags); 7397 7398 (void) ddi_dma_free_handle( 7399 (ddi_dma_handle_t *)&buf_info->dma_handle); 7400 7401 buf_info->virt = 0; 7402 buf_info->phys = 0; 7403 buf_info->data_handle = 0; 7404 buf_info->dma_handle = 0; 7405 goto done; 7406 } 7407 7408 /* Map this page of memory */ 7409 status = ddi_dma_addr_bind_handle( 7410 (ddi_dma_handle_t)buf_info->dma_handle, NULL, 7411 (caddr_t)buf_info->virt, (size_t)buf_info->size, 7412 DDI_DMA_RDWR | DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, NULL, 7413 &dma_cookie, &cookie_count); 7414 7415 if (status != DDI_DMA_MAPPED || (cookie_count > 1)) { 7416 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg, 7417 "ddi_dma_addr_bind_handle failed: status=%x " 7418 "count=%d size=%x align=%x flags=%x", status, 7419 cookie_count, buf_info->size, buf_info->align, 7420 buf_info->flags); 7421 7422 (void) ddi_dma_mem_free( 7423 (ddi_acc_handle_t *)&buf_info->data_handle); 7424 (void) ddi_dma_free_handle( 7425 (ddi_dma_handle_t *)&buf_info->dma_handle); 7426 7427 buf_info->virt = 0; 7428 buf_info->phys = 0; 7429 buf_info->dma_handle = 0; 7430 buf_info->data_handle = 0; 7431 goto done; 7432 } 7433 7434 if (hba->bus_type == SBUS_FC) { 7435 int32_t burstsizes_limit = 0xff; 7436 int32_t ret_burst; 7437 7438 ret_burst = 7439 ddi_dma_burstsizes(buf_info-> 7440 dma_handle) & burstsizes_limit; 7441 if (ddi_dma_set_sbus64(buf_info->dma_handle, 7442 ret_burst) == DDI_FAILURE) { 7443 EMLXS_MSGF(EMLXS_CONTEXT, 7444 &emlxs_mem_alloc_failed_msg, 7445 "ddi_dma_set_sbus64 failed."); 7446 } 7447 } 7448 7449 /* Save Physical address */ 7450 buf_info->phys = dma_cookie.dmac_laddress; 7451 7452 /* Just to be sure, let's add this */ 7453 EMLXS_MPDATA_SYNC((ddi_dma_handle_t)buf_info->dma_handle, 7454 (off_t)0, (size_t)buf_info->size, DDI_DMA_SYNC_FORDEV); 7455 7456 } else { /* allocate virtual memory */ 7457 7458 buf_info->virt = 7459 (uint32_t *)kmem_zalloc((size_t)buf_info->size, 7460 KM_NOSLEEP); 7461 buf_info->phys = 0; 7462 buf_info->data_handle = 0; 7463 buf_info->dma_handle = 0; 7464 7465 if (buf_info->virt == (uint32_t *)0) { 7466 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg, 7467 "size=%x flags=%x", buf_info->size, 7468 buf_info->flags); 7469 } 7470 7471 } 7472 7473 done: 7474 7475 return ((uint8_t *)buf_info->virt); 7476 7477 } /* emlxs_mem_alloc() */ 7478 7479 7480 7481 /* 7482 * emlxs_mem_free: 7483 * 7484 * OS specific routine for memory de-allocation / unmapping 7485 * 7486 * The buf_info->flags field describes the memory operation requested. 7487 * 7488 * FC_MBUF_PHYSONLY set requests a supplied virtual address be unmapped 7489 * for DMA, but not freed. The mapped physical address to be unmapped is in 7490 * buf_info->phys 7491 * 7492 * FC_MBUF_PHYSONLY cleared requests memory be freed and unmapped for DMA only 7493 * if FC_MBUF_DMA is set. The mapped physical address to be unmapped is in 7494 * buf_info->phys. The virtual address to be freed is in buf_info->virt 7495 */ 7496 /*ARGSUSED*/ 7497 extern void 7498 emlxs_mem_free(emlxs_hba_t *hba, MBUF_INFO *buf_info) 7499 { 7500 if (buf_info->flags & FC_MBUF_PHYSONLY) { 7501 7502 if (buf_info->dma_handle) { 7503 (void) ddi_dma_unbind_handle(buf_info->dma_handle); 7504 (void) ddi_dma_free_handle( 7505 (ddi_dma_handle_t *)&buf_info->dma_handle); 7506 buf_info->dma_handle = NULL; 7507 } 7508 7509 } else if (buf_info->flags & (FC_MBUF_DMA|FC_MBUF_DMA32)) { 7510 7511 if (buf_info->dma_handle) { 7512 (void) ddi_dma_unbind_handle(buf_info->dma_handle); 7513 (void) ddi_dma_mem_free( 7514 (ddi_acc_handle_t *)&buf_info->data_handle); 7515 (void) ddi_dma_free_handle( 7516 (ddi_dma_handle_t *)&buf_info->dma_handle); 7517 buf_info->dma_handle = NULL; 7518 buf_info->data_handle = NULL; 7519 } 7520 7521 } else { /* allocate virtual memory */ 7522 7523 if (buf_info->virt) { 7524 kmem_free(buf_info->virt, (size_t)buf_info->size); 7525 buf_info->virt = NULL; 7526 } 7527 } 7528 7529 } /* emlxs_mem_free() */ 7530 7531 7532 /* 7533 * A channel has a association with a msi id. 7534 * One msi id could be associated with multiple channels. 7535 */ 7536 static int 7537 emlxs_next_chan(emlxs_hba_t *hba, int msi_id) 7538 { 7539 emlxs_config_t *cfg = &CFG; 7540 EQ_DESC_t *eqp; 7541 int chan; 7542 int num_wq; 7543 7544 if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) { 7545 /* For SLI4 round robin all WQs associated with the msi_id */ 7546 eqp = &hba->sli.sli4.eq[msi_id]; 7547 num_wq = cfg[CFG_NUM_WQ].current; 7548 7549 mutex_enter(&eqp->lastwq_lock); 7550 chan = eqp->lastwq; 7551 eqp->lastwq++; 7552 if (eqp->lastwq >= ((msi_id + 1) * num_wq)) { 7553 eqp->lastwq -= num_wq; 7554 } 7555 mutex_exit(&eqp->lastwq_lock); 7556 7557 } else { 7558 chan = hba->channel_fcp; 7559 } 7560 return (chan); 7561 } 7562 7563 7564 static int 7565 emlxs_select_fcp_channel(emlxs_hba_t *hba, NODELIST *ndlp, int reset) 7566 { 7567 int channel; 7568 7569 7570 /* IO to FCP2 device or a device reset always use fcp channel */ 7571 if ((ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) || reset) { 7572 return (hba->channel_fcp); 7573 } 7574 7575 channel = emlxs_next_chan(hba, 0); 7576 7577 7578 /* If channel is closed, then try fcp channel */ 7579 if (ndlp->nlp_flag[channel] & NLP_CLOSED) { 7580 channel = hba->channel_fcp; 7581 } 7582 return (channel); 7583 7584 } 7585 7586 static int32_t 7587 emlxs_fast_target_reset(emlxs_port_t *port, emlxs_buf_t *sbp, NODELIST *ndlp) 7588 { 7589 emlxs_hba_t *hba = HBA; 7590 fc_packet_t *pkt; 7591 emlxs_config_t *cfg; 7592 MAILBOXQ *mbq; 7593 MAILBOX *mb; 7594 uint32_t rc; 7595 7596 /* 7597 * This routine provides a alternative target reset provessing 7598 * method. Instead of sending an actual target reset to the 7599 * NPort, we will first unreg the login to that NPort. This 7600 * will cause all the outstanding IOs the quickly complete with 7601 * a NO RPI local error. Next we will force the ULP to relogin 7602 * to the NPort by sending an RSCN (for that NPort) to the 7603 * upper layer. This method should result in a fast target 7604 * reset, as far as IOs completing; however, since an actual 7605 * target reset is not sent to the NPort, it is not 100% 7606 * compatable. Things like reservations will not be broken. 7607 * By default this option is DISABLED, and its only enabled thru 7608 * a hidden configuration parameter (fast-tgt-reset). 7609 */ 7610 rc = FC_TRAN_BUSY; 7611 pkt = PRIV2PKT(sbp); 7612 cfg = &CFG; 7613 7614 if ((mbq = (MAILBOXQ *)emlxs_mem_get(hba, MEM_MBOX, 1))) { 7615 /* issue the mbox cmd to the sli */ 7616 mb = (MAILBOX *) mbq->mbox; 7617 bzero((void *) mb, MAILBOX_CMD_BSIZE); 7618 mb->un.varUnregLogin.rpi = (uint16_t)ndlp->nlp_Rpi; 7619 #ifdef SLI3_SUPPORT 7620 mb->un.varUnregLogin.vpi = port->vpi; 7621 #endif /* SLI3_SUPPORT */ 7622 mb->mbxCommand = MBX_UNREG_LOGIN; 7623 mb->mbxOwner = OWN_HOST; 7624 7625 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg, 7626 "Fast Target Reset: unreg rpi=x%x tmr %d", ndlp->nlp_Rpi, 7627 cfg[CFG_FAST_TGT_RESET_TMR].current); 7628 7629 if (EMLXS_SLI_ISSUE_MBOX_CMD(hba, mbq, MBX_WAIT, 0) 7630 == MBX_SUCCESS) { 7631 7632 ndlp->nlp_Rpi = 0; 7633 7634 mutex_enter(&sbp->mtx); 7635 sbp->node = (void *)ndlp; 7636 sbp->did = ndlp->nlp_DID; 7637 mutex_exit(&sbp->mtx); 7638 7639 if (pkt->pkt_rsplen) { 7640 bzero((uint8_t *)pkt->pkt_resp, 7641 pkt->pkt_rsplen); 7642 } 7643 if (cfg[CFG_FAST_TGT_RESET_TMR].current) { 7644 ndlp->nlp_force_rscn = hba->timer_tics + 7645 cfg[CFG_FAST_TGT_RESET_TMR].current; 7646 } 7647 7648 emlxs_pkt_complete(sbp, IOSTAT_SUCCESS, 0, 0); 7649 } 7650 7651 (void) emlxs_mem_put(hba, MEM_MBOX, (uint8_t *)mbq); 7652 rc = FC_SUCCESS; 7653 } 7654 return (rc); 7655 } 7656 7657 static int32_t 7658 emlxs_send_fcp_cmd(emlxs_port_t *port, emlxs_buf_t *sbp) 7659 { 7660 emlxs_hba_t *hba = HBA; 7661 fc_packet_t *pkt; 7662 emlxs_config_t *cfg; 7663 IOCBQ *iocbq; 7664 IOCB *iocb; 7665 CHANNEL *cp; 7666 NODELIST *ndlp; 7667 char *cmd; 7668 uint16_t lun; 7669 FCP_CMND *fcp_cmd; 7670 uint32_t did; 7671 uint32_t reset = 0; 7672 int channel; 7673 int32_t rval; 7674 7675 pkt = PRIV2PKT(sbp); 7676 did = LE_SWAP24_LO(pkt->pkt_cmd_fhdr.d_id); 7677 7678 /* Find target node object */ 7679 ndlp = emlxs_node_find_did(port, did); 7680 7681 if (!ndlp || !ndlp->nlp_active) { 7682 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_failed_msg, 7683 "Node not found. did=%x", did); 7684 7685 return (FC_BADPACKET); 7686 } 7687 7688 /* When the fcp channel is closed we stop accepting any FCP cmd */ 7689 if (ndlp->nlp_flag[hba->channel_fcp] & NLP_CLOSED) { 7690 return (FC_TRAN_BUSY); 7691 } 7692 7693 /* Snoop for target or lun reset first */ 7694 /* We always use FCP channel to send out target/lun reset fcp cmds */ 7695 /* interrupt affinity only applies to non tgt lun reset fcp cmd */ 7696 7697 cmd = (char *)pkt->pkt_cmd; 7698 lun = *((uint16_t *)cmd); 7699 lun = LE_SWAP16(lun); 7700 7701 iocbq = &sbp->iocbq; 7702 iocb = &iocbq->iocb; 7703 iocbq->node = (void *) ndlp; 7704 7705 /* Check for target reset */ 7706 if (cmd[10] & 0x20) { 7707 /* prepare iocb */ 7708 if ((rval = EMLXS_SLI_PREP_FCP_IOCB(port, sbp, 7709 hba->channel_fcp)) != FC_SUCCESS) { 7710 7711 if (rval == 0xff) { 7712 emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, 7713 0, 1); 7714 rval = FC_SUCCESS; 7715 } 7716 7717 return (rval); 7718 } 7719 7720 mutex_enter(&sbp->mtx); 7721 sbp->pkt_flags |= PACKET_FCP_TGT_RESET; 7722 sbp->pkt_flags |= PACKET_POLLED; 7723 mutex_exit(&sbp->mtx); 7724 7725 #ifdef SAN_DIAG_SUPPORT 7726 emlxs_log_sd_scsi_event(port, SD_SCSI_SUBCATEGORY_TGTRESET, 7727 (HBA_WWN *)&ndlp->nlp_portname, -1); 7728 #endif /* SAN_DIAG_SUPPORT */ 7729 7730 iocbq->flag |= IOCB_PRIORITY; 7731 7732 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg, 7733 "Target Reset: did=%x", did); 7734 7735 cfg = &CFG; 7736 if (cfg[CFG_FAST_TGT_RESET].current) { 7737 if (emlxs_fast_target_reset(port, sbp, ndlp) == 7738 FC_SUCCESS) { 7739 return (FC_SUCCESS); 7740 } 7741 } 7742 7743 /* Close the node for any further normal IO */ 7744 emlxs_node_close(port, ndlp, hba->channel_fcp, 7745 pkt->pkt_timeout); 7746 7747 /* Flush the IO's on the tx queues */ 7748 (void) emlxs_tx_node_flush(port, ndlp, 7749 &hba->chan[hba->channel_fcp], 0, sbp); 7750 7751 /* This is the target reset fcp cmd */ 7752 reset = 1; 7753 } 7754 7755 /* Check for lun reset */ 7756 else if (cmd[10] & 0x10) { 7757 /* prepare iocb */ 7758 if ((rval = EMLXS_SLI_PREP_FCP_IOCB(port, sbp, 7759 hba->channel_fcp)) != FC_SUCCESS) { 7760 7761 if (rval == 0xff) { 7762 emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, 7763 0, 1); 7764 rval = FC_SUCCESS; 7765 } 7766 7767 return (rval); 7768 } 7769 7770 mutex_enter(&sbp->mtx); 7771 sbp->pkt_flags |= PACKET_FCP_LUN_RESET; 7772 sbp->pkt_flags |= PACKET_POLLED; 7773 mutex_exit(&sbp->mtx); 7774 7775 #ifdef SAN_DIAG_SUPPORT 7776 emlxs_log_sd_scsi_event(port, SD_SCSI_SUBCATEGORY_LUNRESET, 7777 (HBA_WWN *)&ndlp->nlp_portname, lun); 7778 #endif /* SAN_DIAG_SUPPORT */ 7779 7780 iocbq->flag |= IOCB_PRIORITY; 7781 7782 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg, 7783 "LUN Reset: did=%x LUN=%02x02x", did, cmd[0], cmd[1]); 7784 7785 /* Flush the IO's on the tx queues for this lun */ 7786 (void) emlxs_tx_lun_flush(port, ndlp, lun, sbp); 7787 7788 /* This is the lun reset fcp cmd */ 7789 reset = 1; 7790 } 7791 7792 channel = emlxs_select_fcp_channel(hba, ndlp, reset); 7793 7794 #ifdef SAN_DIAG_SUPPORT 7795 sbp->sd_start_time = gethrtime(); 7796 #endif /* SAN_DIAG_SUPPORT */ 7797 7798 #if (EMLXS_MODREVX == EMLXS_MODREV2X) 7799 emlxs_swap_fcp_pkt(sbp); 7800 #endif /* EMLXS_MODREV2X */ 7801 7802 fcp_cmd = (FCP_CMND *) pkt->pkt_cmd; 7803 7804 if (fcp_cmd->fcpCntl1 == FCP_QTYPE_UNTAGGED) { 7805 fcp_cmd->fcpCntl1 = FCP_QTYPE_SIMPLE; 7806 } 7807 7808 if (reset == 0) { 7809 /* 7810 * tgt lun reset fcp cmd has been prepared 7811 * separately in the beginning 7812 */ 7813 if ((rval = EMLXS_SLI_PREP_FCP_IOCB(port, sbp, 7814 channel)) != FC_SUCCESS) { 7815 7816 if (rval == 0xff) { 7817 emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, 7818 0, 1); 7819 rval = FC_SUCCESS; 7820 } 7821 7822 return (rval); 7823 } 7824 } 7825 7826 cp = &hba->chan[channel]; 7827 cp->ulpSendCmd++; 7828 7829 /* Initalize sbp */ 7830 mutex_enter(&sbp->mtx); 7831 sbp->ticks = hba->timer_tics + pkt->pkt_timeout + 7832 ((pkt->pkt_timeout > 0xff) ? 0 : 10); 7833 sbp->node = (void *)ndlp; 7834 sbp->lun = lun; 7835 sbp->class = iocb->ULPCLASS; 7836 sbp->did = ndlp->nlp_DID; 7837 mutex_exit(&sbp->mtx); 7838 7839 if (pkt->pkt_cmdlen) { 7840 EMLXS_MPDATA_SYNC(pkt->pkt_cmd_dma, 0, pkt->pkt_cmdlen, 7841 DDI_DMA_SYNC_FORDEV); 7842 } 7843 7844 if (pkt->pkt_datalen && pkt->pkt_tran_type == FC_PKT_FCP_WRITE) { 7845 EMLXS_MPDATA_SYNC(pkt->pkt_data_dma, 0, pkt->pkt_datalen, 7846 DDI_DMA_SYNC_FORDEV); 7847 } 7848 7849 HBASTATS.FcpIssued++; 7850 7851 EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq); 7852 return (FC_SUCCESS); 7853 7854 } /* emlxs_send_fcp_cmd() */ 7855 7856 7857 7858 7859 #ifdef SFCT_SUPPORT 7860 static int32_t 7861 emlxs_send_fct_status(emlxs_port_t *port, emlxs_buf_t *sbp) 7862 { 7863 emlxs_hba_t *hba = HBA; 7864 fc_packet_t *pkt; 7865 IOCBQ *iocbq; 7866 IOCB *iocb; 7867 NODELIST *ndlp; 7868 CHANNEL *cp; 7869 uint16_t iotag; 7870 uint32_t did; 7871 ddi_dma_cookie_t *cp_cmd; 7872 7873 pkt = PRIV2PKT(sbp); 7874 7875 did = sbp->did; 7876 ndlp = sbp->node; 7877 7878 iocbq = &sbp->iocbq; 7879 iocb = &iocbq->iocb; 7880 7881 /* Make sure node is still active */ 7882 if (!ndlp->nlp_active) { 7883 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_failed_msg, 7884 "*Node not found. did=%x", did); 7885 7886 return (FC_BADPACKET); 7887 } 7888 7889 /* If gate is closed */ 7890 if (ndlp->nlp_flag[hba->channel_fcp] & NLP_CLOSED) { 7891 return (FC_TRAN_BUSY); 7892 } 7893 7894 /* Get the iotag by registering the packet */ 7895 iotag = emlxs_register_pkt(sbp->channel, sbp); 7896 7897 if (!iotag) { 7898 /* No more command slots available, retry later */ 7899 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg, 7900 "*Adapter Busy. Unable to allocate iotag: did=0x%x", did); 7901 7902 return (FC_TRAN_BUSY); 7903 } 7904 7905 /* Point of no return */ 7906 7907 cp = sbp->channel; 7908 cp->ulpSendCmd++; 7909 7910 #if (EMLXS_MODREV >= EMLXS_MODREV3) 7911 cp_cmd = pkt->pkt_cmd_cookie; 7912 #else 7913 cp_cmd = &pkt->pkt_cmd_cookie; 7914 #endif /* >= EMLXS_MODREV3 */ 7915 7916 iocb->un.fcpt64.bdl.addrHigh = PADDR_HI(cp_cmd->dmac_laddress); 7917 iocb->un.fcpt64.bdl.addrLow = PADDR_LO(cp_cmd->dmac_laddress); 7918 iocb->un.fcpt64.bdl.bdeSize = pkt->pkt_cmdlen; 7919 iocb->un.fcpt64.bdl.bdeFlags = 0; 7920 7921 if (hba->sli_mode < 3) { 7922 iocb->ULPBDECOUNT = 1; 7923 iocb->ULPLE = 1; 7924 } else { /* SLI3 */ 7925 7926 iocb->ULPBDECOUNT = 0; 7927 iocb->ULPLE = 0; 7928 iocb->unsli3.ext_iocb.ebde_count = 0; 7929 } 7930 7931 /* Initalize iocbq */ 7932 iocbq->port = (void *)port; 7933 iocbq->node = (void *)ndlp; 7934 iocbq->channel = (void *)cp; 7935 7936 /* Initalize iocb */ 7937 iocb->ULPCONTEXT = (uint16_t)pkt->pkt_cmd_fhdr.rx_id; 7938 iocb->ULPIOTAG = iotag; 7939 iocb->ULPRSVDBYTE = 7940 ((pkt->pkt_timeout > 0xff) ? 0 : pkt->pkt_timeout); 7941 iocb->ULPOWNER = OWN_CHIP; 7942 iocb->ULPCLASS = sbp->class; 7943 iocb->