1 #!/usr/bin/ksh 2 # 3 # CDDL HEADER START 4 # 5 # The contents of this file are subject to the terms of the 6 # Common Development and Distribution License (the "License"). 7 # You may not use this file except in compliance with the License. 8 # 9 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 # or http://www.opensolaris.org/os/licensing. 11 # See the License for the specific language governing permissions 12 # and limitations under the License. 13 # 14 # When distributing Covered Code, include this CDDL HEADER in each 15 # file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 # If applicable, add the following below this CDDL HEADER, with the 17 # fields enclosed by brackets "[]" replaced with your own identifying 18 # information: Portions Copyright [yyyy] [name of copyright owner] 19 # 20 # CDDL HEADER END 21 # 22 # Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 # Use is subject to license terms. 24 # 25 26 # 27 # This command provides an simple interface to configure, destroy, and to obtain 28 # the status of a master or slave Kerberos KDC server. 29 # 30 31 function usage { 32 33 app=`basename $0` 34 35 printf "\n$(gettext "Usage: %s [ -a admprincipal ] [ -e enctype ] [ -h ]")\n" $app 36 printf "\t$(gettext "[ -p pwfile ] [ -r realm ] subcommand")\n\n" 37 38 printf "\t$(gettext "-a: Create non-default admin principal.")\n" 39 printf "\t$(gettext "-e: Encryption type used to encrypt the master key")\n" 40 printf "\t$(gettext "-h: This help message.")\n" 41 printf "\t$(gettext "-p: File that contains the admin principal and master key password.")\n" 42 printf "\t$(gettext "-r: Set the default realm for this server.")\n\n" 43 44 printf "\t$(gettext "where 'subcommand' is one of the following:")\n\n" 45 46 printf "\t$(gettext "create [ master ]")\n" 47 printf "\t$(gettext "create [ -m masterkdc ] slave")\n" 48 printf "\t$(gettext "destroy")\n" 49 printf "\t$(gettext "status")\n\n" 50 51 cleanup 1 52 } 53 54 function ask { 55 56 # ask question, set global answer 57 typeset question=$1 default_answer=$2 58 if [[ -z $default_answer ]]; then 59 print "$question \c" 60 else 61 print "$question [$default_answer]: \c" 62 fi 63 read answer 64 [ -z "$answer" ] && answer="$default_answer" 65 } 66 67 function yesno { 68 69 typeset question="$1" 70 # answer is a global set by ask 71 answer= 72 yn=`printf "$(gettext "y/n")"` 73 y=`printf "$(gettext "y")"` 74 n=`printf "$(gettext "n")"` 75 yes=`printf "$(gettext "yes")"` 76 no=`printf "$(gettext "no")"` 77 78 while [[ -z $answer ]]; do 79 ask "$question" $yn 80 case $answer in 81 $y|$yes) answer=yes;; 82 $n|$no) answer=no;; 83 *) answer=;; 84 esac 85 done 86 } 87 88 function query { 89 90 yesno "$*" 91 if [[ $answer = no ]]; then 92 printf "\t$(gettext "No action performed").\n" 93 fi 94 } 95 96 function cleanup { 97 98 integer ret=$1 99 100 kdestroy -q -c $TMP_CCACHE 1>$TMP_FILE 2>&1 101 rm -f $TMP_FILE 102 103 exit $ret 104 } 105 106 function error_message { 107 108 printf "---------------------------------------------------\n" 109 printf "$(gettext "Setup FAILED").\n\n" 110 111 cleanup 1 112 } 113 114 function check_bin { 115 116 bin=$1 117 118 if [[ ! -x $bin ]]; then 119 printf "$(gettext "Could not access/execute %s").\n" $bin 120 error_message 121 fi 122 } 123 124 function check_ret { 125 126 integer ret=$1 127 prog=$2 128 129 if [[ $ret -ne 0 ]]; then 130 printf "\n$(gettext "%s failed with return value %d, exiting").\n\n" $prog $ret 131 error_message 132 fi 133 } 134 135 136 function ok_to_proceed { 137 138 yesno "$@" 139 140 if [[ $answer = no ]]; then 141 printf "\n$(gettext "Exiting, no action performed")\n\n" 142 cleanup 0 143 fi 144 } 145 146 function check_value { 147 148 typeset arg="$1" 149 150 if [[ -z $arg ]]; then 151 printf "\n$(gettext "No input obtained for %s, exiting").\n" $checkval 152 error_message 153 else 154 echo "$arg">$TMP_FILE 155 if egrep -s '[*$^#!]+' $TMP_FILE; then 156 printf "\n$(gettext "Invalid input obtained for %s, exiting").\n" $checkval 157 error_message 158 fi 159 fi 160 } 161 162 function setup_kdc_conf { 163 164 printf "\n$(gettext "Setting up %s").\n" $KRB5_KDC_CONF 165 166 if [[ -r $KRB5_KDC_CONF ]]; then 167 cat $KRB5_KDC_CONF > $KRB5_KDC_CONF.sav 168 cannot_create $KRB5_KDC_CONF.sav $? 169 fi 170 171 exec 3>$KRB5_KDC_CONF 172 if [[ $? -ne 0 ]]; then 173 printf "\n$(gettext "Cannot write to %s, exiting").\n" $KRB5_KDC_CONF 174 error_message 175 fi 176 177 printf "\n[kdcdefaults]\n\tkdc_ports = 88,750\n\n" 1>&3 178 printf "[realms]\n\t$REALM = {\n" 1>&3 179 printf "\t\tprofile = $KRB5_KRB_CONF\n" 1>&3 180 printf "\t\tdatabase_name = $PRINCDB\n" 1>&3 181 printf "\t\tmaster_key_type = $ENCTYPE\n" 1>&3 182 printf "\t\tacl_file = $KADM5ACL\n" 1>&3 183 printf "\t\tkadmind_port = 749\n" 1>&3 184 printf "\t\tmax_life = 8h 0m 0s\n" 1>&3 185 printf "\t\tmax_renewable_life = 7d 0h 0m 0s\n" 1>&3 186 printf "\t\tdefault_principal_flags = +preauth\n" 1>&3 187 188 printf "\t\tsunw_dbprop_enable = true\n" 1>&3 189 if [[ $master = yes ]]; then 190 printf "\t\tsunw_dbprop_master_ulogsize = 1000\n" 1>&3 191 fi 192 if [[ $slave = yes ]]; then 193 printf "\t\tsunw_dbprop_slave_poll = 2m\n" 1>&3 194 fi 195 196 printf "\t}\n" 1>&3 197 } 198 199 function setup_krb_conf { 200 201 printf "\n$(gettext "Setting up %s").\n" $KRB5_KRB_CONF 202 203 if [[ -r $KRB5_KRB_CONF ]]; then 204 cat $KRB5_KRB_CONF > $KRB5_KRB_CONF.sav 205 cannot_create $KRB5_KRB_CONF.sav $? 206 fi 207 208 exec 3>$KRB5_KRB_CONF 209 if [[ $? -ne 0 ]]; then 210 printf "\n$(gettext "Cannot write to %s, exiting").\n" $KRB5_KRB_CONF 211 error_message 212 fi 213 214 printf "[libdefaults]\n" 1>&3 215 printf "\tdefault_realm = $REALM\n\n" 1>&3 216 217 printf "[realms]\n" 1>&3 218 printf "\t$REALM = {\n" 1>&3 219 if [[ $slave = yes ]]; then 220 printf "\t\tkdc = $master_hn\n" 1>&3 221 fi 222 printf "\t\tkdc = $fqhn\n" 1>&3 223 if [[ $master = yes ]]; then 224 printf "\t\tadmin_server = $fqhn\n" 1>&3 225 else 226 printf "\t\tadmin_server = $master_hn\n" 1>&3 227 fi 228 printf "\t}\n\n" 1>&3 229 230 printf "[domain_realm]\n" 1>&3 231 printf "\t.$domain = $REALM\n\n" 1>&3 232 233 printf "[logging]\n" 1>&3 234 printf "\tdefault = FILE:/var/krb5/kdc.log\n" 1>&3 235 printf "\tkdc = FILE:/var/krb5/kdc.log\n" 1>&3 236 printf "\tkdc_rotate = {\n\t\tperiod = 1d\n\t\tversions = 10\n\t}\n\n" 1>&3 237 238 printf "[appdefaults]\n" 1>&3 239 printf "\tkinit = {\n\t\trenewable = true\n\t\tforwardable = true\n" 1>&3 240 printf "\t}\n" 1>&3 241 } 242 243 function cannot_create { 244 245 typeset filename="$1" 246 typeset stat="$2" 247 if [[ $stat -ne 0 ]]; then 248 printf "\n$(gettext "Cannot create/edit %s, exiting").\n" $filename 249 error_message 250 fi 251 } 252 253 function check_admin { 254 255 message=$1 256 257 if [[ -z $ADMIN_PRINC ]]; then 258 printf "$message" 259 read ADMIN_PRINC 260 checkval="ADMIN_PRINC"; check_value $ADMIN_PRINC 261 fi 262 263 echo "$ADMIN_PRINC">$TMP_FILE 264 265 if egrep -s '\/admin' $TMP_FILE; then 266 # Already in "/admin" format, do nothing 267 : 268 else 269 if egrep -s '\/' $TMP_FILE; then 270 printf "\n$(gettext "Improper entry for krb5 admin principal, exiting").\n" 271 error_message 272 else 273 ADMIN_PRINC=$(echo "$ADMIN_PRINC/admin") 274 fi 275 fi 276 277 } 278 279 function ping_check { 280 281 typeset machine="$1" 282 283 if $PING $machine > /dev/null 2>&1; then 284 : 285 else 286 printf "\n$(gettext "%s %s is unreachable, exiting").\n" $string $machine 287 error_message 288 fi 289 } 290 291 function check_host { 292 293 echo "$host">$TMP_FILE 294 if egrep -s '[^.]\.[^.]+$' $TMP_FILE; then 295 # do nothing, host is in fqhn format 296 : 297 else 298 if egrep -s '\.+' $TMP_FILE; then 299 printf "\n$(gettext "Improper format of host name: '%s'").\n" 300 printf "$(gettext "Expecting the following format: 'somehost.example.com' or 'somehost', exiting").\n" 301 error_message 302 else 303 # Attach fqdn to host, to get the Fully Qualified Domain 304 # Name of the host requested 305 host=$(echo "$host.$domain") 306 fi 307 fi 308 309 # 310 # Ping to see if the host is alive! 311 # 312 ping_check $host 313 } 314 315 function kill_daemons { 316 317 # Kill daemons so they won't go into maintenance mode 318 $SVCADM disable -s krb5kdc 319 if [[ $? -ne 0 ]]; then 320 printf "\n$(gettext "Error in disabling krb5kdc, exiting").\n" 321 error_message 322 fi 323 $SVCADM disable -s kadmin 324 if [[ $? -ne 0 ]]; then 325 printf "\n$(gettext "Error in disabling kadmind, exiting").\n" 326 error_message 327 fi 328 $SVCADM disable -s krb5_prop 329 if [[ $? -ne 0 ]]; then 330 printf "\n$(gettext "Error in disabling kpropd, exiting").\n" 331 error_message 332 fi 333 334 # Make sure that none of the daemons outside of SMF are running either 335 pkill kadmind 336 if [[ $? -gt 1 ]]; then 337 printf "\n$(gettext "Error in killing kadmind, exiting").\n" 338 error_message 339 fi 340 pkill krb5kdc 341 if [[ $? -gt 1 ]]; then 342 printf "\n$(gettext "Error in killing krb5kdc, exiting").\n" 343 error_message 344 fi 345 pkill kpropd 346 if [[ $? -gt 1 ]]; then 347 printf "\n$(gettext "Error in killing kpropd, exiting").\n" 348 error_message 349 fi 350 } 351 352 function setup_mkeytab { 353 354 check_admin "\n$(gettext "Enter the krb5 administrative principal to be created"): \c" 355 356 if [[ -z $PWFILE ]]; then 357 echo 358 $KADMINL -q "ank $ADMIN_PRINC" 359 check_ret $? $KADMINL 360 else 361 cat $PWFILE $PWFILE | $KADMINL -q "ank $ADMIN_PRINC" > /dev/null 2>&1 362 check_ret $? $KADMINL 363 fi 364 365 $KADMINL -q "ank -randkey host/$fqhn" 1>$TMP_FILE 2>&1 366 check_ret $? $KADMINL 367 $KADMINL -q "ktadd host/$fqhn" 1>$TMP_FILE 2>&1 368 check_ret $? $KADMINL 369 } 370 371 function setup_skeytab { 372 373 check_admin "\n$(gettext "Enter the krb5 administrative principal to be used"): \c" 374 375 printf "$(gettext "Obtaining TGT for %s") ...\n" $ADMIN_PRINC 376 377 if [[ -z $PWFILE ]]; then 378 kinit -c $TMP_CCACHE -S kadmin/$master_hn $ADMIN_PRINC 379 check_ret $? kinit 380 else 381 cat $PWFILE | kinit -c $TMP_CCACHE -S kadmin/$master_hn \ 382 $ADMIN_PRINC > /dev/null 2>&1 383 fi 384 klist -c $TMP_CCACHE 1>$TMP_FILE 2>&1 385 if egrep -s "$(gettext "Valid starting")" $TMP_FILE && \ 386 egrep -s "kadmin/$master_hn@$REALM" $TMP_FILE; then 387 : 388 else 389 printf "\n$(gettext "kinit of %s failed, exiting").\n" $ADMIN_PRINC 390 error_message 391 fi 392 393 $KADMIN -c $TMP_CCACHE -q "ank -randkey kiprop/$fqhn" 1>$TMP_FILE 2>&1 394 check_ret $? $KADMIN 395 $KADMIN -c $TMP_CCACHE -q "ktadd kiprop/$fqhn" 1>$TMP_FILE 2>&1 396 check_ret $? $KADMIN 397 398 $KADMIN -c $TMP_CCACHE -q "ank -randkey host/$fqhn" 1>$TMP_FILE 2>&1 399 check_ret $? $KADMIN 400 $KADMIN -c $TMP_CCACHE -q "ktadd host/$fqhn" 1>$TMP_FILE 2>&1 401 check_ret $? $KADMIN 402 403 kdestroy -q -c $TMP_CCACHE 1>$TMP_FILE 2>&1 404 check_ret $? $kdestroy 405 } 406 407 function setup_kadm5acl { 408 409 printf "\n$(gettext "Setting up %s").\n" $KADM5ACL 410 411 if [[ -r $KADM5ACL ]]; then 412 cat $KADM5ACL > $KADM5ACL.sav 413 cannot_create $KADM5ACL.sav $? 414 fi 415 416 exec 3>$KADM5ACL 417 if [[ $? -ne 0 ]]; then 418 printf "\n$(gettext "Cannot write to %s, exiting").\n" $KADM5ACL 419 error_message 420 fi 421 422 if [[ $master = yes ]]; then 423 printf "\n$ADMIN_PRINC@$REALM\t\tacmil\n" 1>&3 424 printf "\nkiprop/*@$REALM\t\tp\n" 1>&3 425 else 426 printf "\n*/admin@___default_realm___\t\t*\n" 1>&3 427 fi 428 } 429 430 function setup_kpropdacl { 431 432 printf "\n$(gettext "Setting up %s").\n\n" $KPROPACL 433 434 if [[ -r $KPROPACL ]]; then 435 cat $KPROPACL > $KPROPACL.sav 436 cannot_create $KPROPACL.sav $? 437 fi 438 439 exec 3>$KPROPACL 440 if [[ $? -ne 0 ]]; then 441 printf "\n$(gettext "Cannot write to %s, exiting").\n" $KPROPACL 442 error_message 443 fi 444 printf "\nhost/$master_hn@$REALM\n" 1>&3 445 } 446 447 function setup_master { 448 449 # create principal DB (KDB) 450 if [[ -z $PWFILE ]]; then 451 echo 452 kdb5_util create 453 check_ret $? kdb5_util 454 else 455 cat $PWFILE $PWFILE | kdb5_util create > /dev/null 456 check_ret $? kdb5_util 457 fi 458 459 setup_mkeytab 460 setup_kadm5acl 461 462 $SVCADM enable -r -s krb5kdc 463 $SVCADM enable -r -s kadmin 464 } 465 466 function setup_slave { 467 468 integer count=1 469 470 setup_skeytab 471 472 # Clear the kadm5acl, since the start methods look at this file 473 # to see if the server has been configured as a master server 474 setup_kadm5acl 475 476 setup_kpropdacl 477 478 $SVCADM enable -r -s krb5_prop 479 480 # Wait for full propagation of the database, in some environments 481 # this could take a few seconds 482 while [[ ! -f /var/krb5/principal ]]; do 483 if [[ count -gt $LOOPCNT ]]; then 484 printf "\n$(gettext "Could not receive updates from the master").\n" 485 error_message 486 ((count = count + 1)) 487 fi 488 printf "$(gettext "Waiting for database from master")...\n" 489 sleep $SLEEPTIME 490 done 491 492 # The database is propagated now we need to create the stash file 493 if [[ -z $PWFILE ]]; then 494 kdb5_util stash 495 check_ret $? kdb5_util 496 else 497 cat $PWFILE | kdb5_util stash > /dev/null 2>&1 498 check_ret $? kdb5_util 499 fi 500 501 $SVCADM enable -r -s krb5kdc 502 } 503 504 function kdb5_destroy { 505 typeset status=0 506 typeset arg= 507 508 [[ -n $REALM ]] && arg="-r $REALM" 509 printf "$(gettext "yes")\n" | kdb5_util $arg destroy > /dev/null 2>&1 510 511 status=$? 512 [[ $status -eq 0 ]] && return $status 513 514 # Could mean that the admin could have already removed part of the 515 # configuration. Better to check to see if anything else should be 516 # destroyed. We check by looking at any other stash files in /var/krb5 517 stashfiles=`ls $STASH` 518 for stash in $stashfiles 519 do 520 realm=${stash#*.k5.} 521 [[ -z $realm ]] && continue 522 523 printf "$(gettext "Found non-default realm: %s")\n" $realm 524 query "$(gettext "Do you wish to destroy realm"): $realm ?" 525 if [[ $answer == yes ]]; then 526 printf "$(gettext "yes")\n" | kdb5_util -r $realm destroy > /dev/null 2>&1 527 status=$? 528 if [[ $status -ne 0 ]]; then 529 printf "$(gettext "Could not destroy realm: %s")\n" $realm 530 return $status 531 fi 532 else 533 printf "$(gettext "%s will not be destroyed").\n" $realm 534 status=0 535 fi 536 done 537 538 return $status 539 } 540 541 function destroy_kdc { 542 typeset status 543 544 # Check first to see if this is an existing KDC or server 545 if [[ -f $KRB5KT || -f $PRINCDB || -f $OLDPRINCDB ]] 546 then 547 if [[ -z $PWFILE ]]; then 548 printf "\n$(gettext "Some of the following files are present on this system"):\n" 549 echo "\t$KRB5KT\n\t$PRINCDB\n\t$OLDPRINCDB\n\t$STASH\n" 550 if [[ -z $d_option ]]; then 551 printf "$(gettext "You must first run 'kdcmgr destroy' to remove all of these files before creating a KDC server").\n\n" 552 cleanup 1 553 else 554 ok_to_proceed "$(gettext "All of these files will be removed, okay to proceed?")" 555 fi 556 fi 557 else 558 if [[ -n $d_option ]]; then 559 printf "\n$(gettext "No KDC related files exist, exiting").\n\n" 560 cleanup 0 561 fi 562 return 563 fi 564 565 kdb5_destroy 566 status=$? 567 568 rm -f $KRB5KT 569 570 [[ $status -ne 0 ]] && cleanup 1 571 } 572 573 function kadm5_acl_configed { 574 575 if [[ -s $KADM5ACL ]]; then 576 grep -v '^[ ]*#' $KADM5ACL | \ 577 egrep '_default_realm_' > /dev/null 2>&1 578 if [[ $? -gt 0 ]]; then 579 return 0 580 fi 581 fi 582 583 return 1 584 } 585 586 function status_kdc { 587 588 integer is_master=0 589 590 printf "\n$(gettext "KDC Status Information")\n" 591 echo "--------------------------------------------" 592 svcs -xv svc:/network/security/krb5kdc:default 593 594 if kadm5_acl_configed; then 595 is_master=1 596 printf "\n$(gettext "KDC Master Status Information")\n" 597 echo "--------------------------------------------" 598 svcs -xv svc:/network/security/kadmin:default 599 else 600 printf "\n$(gettext "KDC Slave Status Information")\n" 601 echo "--------------------------------------------" 602 svcs -xv svc:/network/security/krb5_prop:default 603 fi 604 605 printf "\n$(gettext "Transaction Log Information")\n" 606 echo "--------------------------------------------" 607 /usr/sbin/kproplog -h 608 609 printf "$(gettext "Kerberos Related File Information")\n" 610 echo "--------------------------------------------" 611 printf "$(gettext "(will display any missing files below)")\n" 612 FILELIST="$KRB5_KDC_CONF $KRB5_KRB_CONF $KADM5ACL $KRB5KT $PRINCDB " 613 for file in $FILELIST; do 614 if [[ ! -s $file ]]; then 615 printf "$(gettext "%s not found").\n" $file 616 fi 617 done 618 if [[ $is_master -eq 0 && ! -s $KPROPACL ]]; then 619 printf "$(gettext "%s not found").\n" $KPROPACL 620 fi 621 622 test ! -s $STASH && 623 printf "$(gettext "Stash file not found") (/var/krb5/.k5.*).\n" 624 echo 625 626 cleanup 0 627 } 628 629 # Start of Main script 630 631 typeset -u REALM 632 typeset -l host 633 typeset -l fqhn 634 635 # Defaults 636 KRB5_KDC_CONF=/etc/krb5/kdc.conf 637 KRB5_KRB_CONF=/etc/krb5/krb5.conf 638 KADM5ACL=/etc/krb5/kadm5.acl 639 KPROPACL=/etc/krb5/kpropd.acl 640 641 KRB5KT=/etc/krb5/krb5.keytab 642 PRINCDB=/var/krb5/principal 643 OLDPRINCDB=/var/krb5/principal.old 644 STASH=/var/krb5/.k5.* 645 646 KADMINL=/usr/sbin/kadmin.local; check_bin $KADMINL 647 KADMIN=/usr/sbin/kadmin; check_bin $KADMIN 648 KDCRES=/usr/lib/krb5/klookup; check_bin $KDCRES 649 SVCADM=/usr/sbin/svcadm; check_bin $SVCADM 650 PING=/usr/sbin/ping; check_bin $PING 651 652 ENCTYPE=aes128-cts-hmac-sha1-96 653 LOOPCNT=10 654 SLEEPTIME=5 655 656 if [[ -x /usr/bin/mktemp ]]; then 657 TMP_FILE=$(/usr/bin/mktemp /etc/krb5/krb5tmpfile.XXXXXX) 658 TMP_CCACHE=$(/usr/bin/mktemp /etc/krb5/krb5tmpccache.XXXXXX) 659 else 660 TMP_FILE="/etc/krb5/krb5tmpfile.$$" 661 TMP_CCACHE="/etc/krb5/krb5tmpccache.$$" 662 fi 663 664 if [[ ! -f /etc/resolv.conf ]]; then 665 printf "$(gettext "Error: need to configure /etc/resolv.conf").\n" 666 667 cleanup 1 668 fi 669 670 fqhn=`$KDCRES` 671 if [[ -n "$fqhn" ]]; then 672 : 673 elif [[ -n $(hostname) && -n $(domainname) ]]; then 674 fqhn=$(hostname|cut -f1 -d'.').$(domainname|cut -f2- -d'.') 675 else 676 printf "$(gettext "Error: can not determine full hostname (FQHN). Aborting")\n" 677 printf "$(gettext "Note, trying to use hostname and domainname to get FQHN").\n" 678 679 cleanup 1 680 fi 681 682 ping_check $fqhn 683 684 domain=${fqhn#*.} # remove host part 685 686 exitmsg=`printf "$(gettext "Exiting...")"` 687 688 trap "echo $exitmsg; rm -f $TMP_FILE $TMP_CCACHE; exit 1" HUP INT QUIT TERM 689 690 while getopts :a:e:hp:r:s flag 691 do 692 case "$flag" in 693 a) ADMIN_PRINC=$OPTARG;; 694 e) ENCTYPE=$OPTARG;; 695 h) usage;; 696 p) PWFILE=$OPTARG 697 if [[ ! -r $PWFILE ]]; then 698 printf "\n$(gettext "Password file %s does not exist, exiting").\n\n" $PWFILE 699 cleanup 1 700 fi 701 ;; 702 r) REALM=$OPTARG;; 703 *) usage;; 704 esac 705 done 706 shift $(($OPTIND - 1)) 707 708 case "$*" in 709 create) master=yes;; 710 "create master") master=yes;; 711 "create -m "*) host=$3 712 checkval="MASTER"; check_value $host 713 check_host 714 master_hn=$host 715 if [[ $4 != slave ]]; then 716 usage 717 fi;& 718 "create slave") slave=yes;; 719 destroy) d_option=yes 720 kill_daemons 721 destroy_kdc 722 cleanup 0;; 723 status) status_kdc;; 724 *) usage;; 725 esac 726 727 kill_daemons 728 729 printf "\n$(gettext "Starting server setup")\n" 730 printf "---------------------------------------------------\n" 731 732 # Checks for existing kdb and destroys if desired 733 destroy_kdc 734 735 if [[ -z $REALM ]]; then 736 printf "$(gettext "Enter the Kerberos realm"): \c" 737 read REALM 738 checkval="REALM"; check_value $REALM 739 fi 740 741 if [[ -z $master && -z $slave ]]; then 742 query "$(gettext "Is this machine to be configured as a master?"): \c" 743 master=$answer 744 745 if [[ $answer = no ]]; then 746 query "$(gettext "Is this machine to be configured as a slave?"): \c" 747 slave=$answer 748 if [[ $answer = no ]]; then 749 printf "\n$(gettext "Machine must either be a master or a slave KDC server").\n" 750 error_message 751 fi 752 fi 753 fi 754 755 if [[ $slave = yes && -z $master_hn ]]; then 756 printf "$(gettext "What is the master KDC's host name?"): \c" 757 read host 758 checkval="MASTER"; check_value $host 759 check_host 760 master_hn=$host 761 fi 762 763 setup_kdc_conf 764 765 setup_krb_conf 766 767 if [[ $master = yes ]]; then 768 setup_master 769 else 770 setup_slave 771 fi 772 773 printf "\n---------------------------------------------------\n" 774 printf "$(gettext "Setup COMPLETE").\n\n" 775 776 cleanup 0 777
Indexes created Sat Nov 28 12:39:51 UTC 2009
Terms of Use |
Privacy |
Trademarks |
Copyright Policy |
Site Guidelines |
Help
Your use of this web site or any of its content or software indicates your agreement to be bound by these Terms of Use.
Copyright © 1995-2008 Sun Microsystems, Inc.