1 # 2 # CDDL HEADER START 3 # 4 # The contents of this file are subject to the terms of the 5 # Common Development and Distribution License (the "License"). 6 # You may not use this file except in compliance with the License. 7 # 8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 # or http://www.opensolaris.org/os/licensing. 10 # See the License for the specific language governing permissions 11 # and limitations under the License. 12 # 13 # When distributing Covered Code, include this CDDL HEADER in each 14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 # If applicable, add the following below this CDDL HEADER, with the 16 # fields enclosed by brackets "[]" replaced with your own identifying 17 # information: Portions Copyright [yyyy] [name of copyright owner] 18 # 19 # CDDL HEADER END 20 # 21 # 22 # Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 # Use is subject to license terms. 24 # 25 # include global definitions 26 include ../Makefile.master 27 28 # 29 # List of architectures to build as part of the standard build. 30 # 31 # Some of these architectures are built in parallel (see i386_PARALLEL and 32 # sparc_PARALLEL). This requires building some parts first before parallel build 33 # can start. Platform make files know what should be built as a prerequisite for 34 # the parallel build to work. The i386_PREREQ and sparc_PREREQ variables tell 35 # which platform directory to enter to start making prerequisite dependencies. 36 # 37 sparc_ARCHITECTURES = sun4v sun4u sparc 38 39 i386_ARCHITECTURES = i86pc i86xpv intel 40 41 # 42 # For i386 all architectures can be compiled in parallel. 43 # 44 # intel/Makefile knows how to build prerequisites needed for parallel build. 45 # 46 i386_PREREQ = intel 47 i386_PARALLEL = $(i386_ARCHITECTURES) 48 49 # 50 # For sparc all architectures can be compiled in parallel. 51 # 52 # sun4/Makefile knows how to build prerequisites needed for parallel build. 53 # can start. 54 # 55 sparc_PREREQ = sun4 56 sparc_PARALLEL = $(sparc_ARCHITECTURES) 57 58 # 59 # Platforms defined in $(MACH)_PARALLEL are built in parallel. DUMMY is placed 60 # at the end in case $(MACH)_PARALLEL is empty to prevent everything going in 61 # parallel. 62 # 63 .PARALLEL: $($(MACH)_PARALLEL) DUMMY 64 65 # 66 # For build prerequisites we use a special target which is constructed by adding 67 # '.prereq' suffix to the $(MACH)_PREREQ. 68 # 69 PREREQ_TARGET = $($(MACH)_PREREQ:%=%.prereq) 70 71 72 def := TARGET= def 73 all := TARGET= all 74 install := TARGET= install 75 install_h := TARGET= install_h 76 clean := TARGET= clean 77 clobber := TARGET= clobber 78 lint := TARGET= lint 79 clean.lint := TARGET= clean.lint 80 check := TARGET= check 81 modlist := TARGET= modlist 82 modlist := NO_STATE= -K $$MODSTATE$$$$ 83 84 .KEEP_STATE: 85 86 def all lint: all_h $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 87 88 install: all_h install_dirs $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 89 90 install_dirs: 91 @cd ..; pwd; $(MAKE) rootdirs 92 @pwd 93 94 # 95 # Rule to build prerequisites. The left part of the pattern will match 96 # PREREQ_TARGET. 97 # 98 # The location of the Makefile is determined by strippinng '.prereq' suffix from 99 # the target name. We add '.prereq' suffix to the target passed to the child 100 # Makefile so that it can distinguish prerequisite build from the regular one. 101 # 102 # 103 %.prereq: 104 @cd $(@:%.prereq=%); pwd; $(MAKE) $(NO_STATE) $(TARGET).prereq 105 106 # 107 # Rule to build architecture files. Build all required prerequisites and then 108 # build the rest (potentially in parallel). 109 # 110 $($(MACH)_ARCHITECTURES): $(PREREQ_TARGET) FRC 111 @cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET) 112 113 $(PMTMO_FILE) pmtmo_file: $(PATCH_MAKEUP_TABLE) 114 @if [ -z "$(PATCH_MAKEUP_TABLE)" ] ; then \ 115 echo 'ERROR: $$(PATCH_MAKEUP_TABLE) not set' \ 116 'in environment' >&2 ; \ 117 exit 1 ; \ 118 fi 119 RELEASE="$(RELEASE)" MACH="$(MACH)" \ 120 $(CTFCVTPTBL) -o $(PMTMO_FILE) $(PATCH_MAKEUP_TABLE) 121 122 # 123 # The following is the list of directories which contain Makefiles with 124 # targets to install header file. The machine independent headers are 125 # installed by invoking the Makefile in the directory containing the 126 # header files. Machine and architecture dependent headers are installed 127 # by invoking the main makefile for that architecture/machine which, 128 # in turn, is responsible for invoking the Makefiles which install headers. 129 # It is done this way so as not to assume that all of the header files in 130 # the architecture/machine dependent subdirectories are in completely 131 # isomorphic locations. 132 # 133 COMMON_HDRDIRS= common/avs \ 134 common/c2 \ 135 common/des \ 136 common/fs \ 137 common/gssapi \ 138 common/idmap \ 139 common/inet \ 140 common/inet/ipf/netinet \ 141 common/inet/kssl \ 142 common/inet/nca \ 143 common/ipp \ 144 common/net \ 145 common/netinet \ 146 common/nfs \ 147 common/pcmcia/sys \ 148 common/rpc \ 149 common/rpcsvc \ 150 common/sharefs \ 151 common/smbsrv \ 152 common/sys \ 153 common/vm 154 155 156 # These aren't the only headers in closed. But the other directories 157 # are simple enough that they can be driven from the src tree. 158 $(CLOSED_BUILD)COMMON_HDRDIRS += $(CLOSED)/uts/common/sys 159 160 # 161 # Subset of COMMON_HDRDIRS in which at least one header is generated 162 # at runtime (e.g., rpcgen). (This is a partial list; there are 163 # other directories that should be included and do not yet have the 164 # necessary Makefile support. See 6414855.) 165 # 166 DYNHDRDIRS = common/rpcsvc common/idmap 167 168 sparc_HDRDIRS= sun/sys 169 i386_HDRDIRS= i86pc/vm i86xpv/vm 170 171 HDRDIRS= $(COMMON_HDRDIRS) $($(MACH)_HDRDIRS) 172 install_h check: $(HDRDIRS) $($(MACH)_ARCHITECTURES) 173 174 $(HDRDIRS): FRC 175 @cd $@; pwd; $(MAKE) $(TARGET) 176 177 # ensures that headers made by rpcgen and others are available in uts source 178 # for kernel builds to reference without building install_h 179 # 180 all_h: FRC 181 @cd common/sys; pwd; $(MAKE) $@ 182 @cd common/rpc; pwd; $(MAKE) $@ 183 @cd common/rpcsvc; pwd; $(MAKE) $@ 184 @cd common/gssapi; pwd; $(MAKE) $@ 185 @cd common/idmap; pwd; $(MAKE) $@ 186 187 clean clobber: $($(MACH)_ARCHITECTURES) $(DYNHDRDIRS) 188 @if [ '$(PATCH_BUILD)' != '#' ] ; then \ 189 echo $(RM) $(PMTMO_FILE) ; \ 190 $(RM) $(PMTMO_FILE) ; \ 191 fi 192 193 EXTRA_CLOBBER_TARGETS= common/avs/ns/rdc 194 clobber: $(EXTRA_CLOBBER_TARGETS) 195 196 197 clean.lint modlist: $($(MACH)_ARCHITECTURES) 198 199 ONC_FILES= common/io/timod.c \ 200 common/os/sig.c \ 201 common/os/flock.c \ 202 common/os/sysent.c \ 203 common/os/swapgeneric.c \ 204 common/syscall/fcntl.c 205 206 # edit onc plus source files. 207 ONC_PLUS: $(ONC_FILES:%=%_onc_plus) 208 209 # 210 # Cross-reference customization: build a cross-reference over all of 211 # the supported architectures. Although there's no correct way to set 212 # the include path (since we don't know what architecture is the one 213 # the user will be interested in), it's historically been set to 214 # mirror the $(XRDIRS) list, and that works kinda sorta okay. 215 # 216 # We need to manually prune usr/closed/uts/{i86xpv|sfmmu|i86pc} since 217 # none of them exist. 218 # 219 SHARED_XRDIRS = $(sparc_ARCHITECTURES) $(i386_ARCHITECTURES) sun4 sfmmu \ 220 sun common 221 CLOSED_XRDIRS = $(SHARED_XRDIRS:%=% ../../closed/uts/%) 222 XRDIRS = $(SHARED_XRDIRS) 223 CLOSED_XRDIRS_XEN = $(CLOSED_XRDIRS:../../closed/uts/i86xpv=) 224 CLOSED_XRDIRS_1 = $(CLOSED_XRDIRS_XEN:../../closed/uts/i86pc=) 225 $(CLOSED_BUILD)XRDIRS = $(CLOSED_XRDIRS_1:../../closed/uts/sfmmu=) 226 227 XRINCDIRS = $(XRDIRS) 228 229 cscope.out tags: FRC 230 $(XREF) -x $@ 231 232 FRC: 233
Indexes created Thu Nov 26 13:30:14 UTC 2009
Terms of Use |
Privacy |
Trademarks |
Copyright Policy |
Site Guidelines |
Help
Your use of this web site or any of its content or software indicates your agreement to be bound by these Terms of Use.
Copyright © 1995-2008 Sun Microsystems, Inc.